Flickering issue in clips where brightness effects were used

I'm working on a project in Final Cut Pro and had to apply a brightening effect (increased saturation) because the show was in very low lighting. During playback, it's started to have a flickering effect-is this a frame rate issue, an issue with the effect, or something else?
Any help would be appreciated-thank you!

Define flickering - when do you see it? Where? can you post an example clip?
Patrick

Similar Messages

  • How do I find where an effect was used?

    Hi -
    I'm running AE CS6 (on MBPro OS X 10.7.5) and I just re-opened a file made with AE CS4 that uses some BCC plug-ins which I haven't re-installed in CS6. I got an alert that some effects were missing from the project.  I'd like to find out where the effects are used in the project so I can delete them and end the alert message's reign of terror.  Is there a shortcut way of doing that or must I hunt through every layer manually?
    TIA your advice,
    JL

    Removing an effect from a composition will not cause AE to be unable to launch entirely.
    Can you open AE and create a new project?
    Do you happen to know the exact version number of AE? It should be 11.0.2 (although, if you're a cloud subscription member, it shouldn't start with an 11 at all )

  • Which effects were used in this video?

    In the link below does any one know which effects were used. I am creating a video but I would like to recreate some of these effects, specifically the two videos over lapping with transparency, the fast reverse clips, and any other you can see from the video would be helpful.  Thanks!
    KNITZ Fall 2014 - For Love & Lemons | Facebook

    Overlapping with transparency is simple enough. Just put on video on track one and the other on track two. Then set the track two video to 50% opacity and adjust to taste.You will probably spend some time changing the position of one or both of the videos.
    Shooting on green screen makes it easier to overlap videos though. Or, if not a chroma key color, at least a solid color.
    Reversing a video is a simple matter of changing the speed to a negative number.
    There really isn't anything too complicated in that video as far as I can tell. A lot of cropping and masking and transparency.  Not much else.

  • What effects were used in Desperate Housewives Season 7 Promo?

    Students want to promote something on campus and want to use similar effects as used in the Desperate Housewives Season 7 Promo (see on YouTube here -->  http://www.youtube.com/watch?v=YGt0KEAKBPk )
    What was used to get the great coloring - very bright/sauturated?  Was iT saturation of certain colors only?
    The very orange horizon/sunset effect?
    The clothes 'falling' of the actress while she is walking, changing into other clothes
    Clothes falling of her when she is getting out of the car
    This is really a great promo and as a novice After Effects user, I would love to know how these were created (what effects/plugins/etc).
    Thanks in advance!
    Regards
    Danie

    Way over your head, if you are just a beginner...
    What was used to get the great coloring - very bright/sauturated?  Was iT saturation of certain colors only?
    The very orange horizon/sunset effect?
    Elaborate color correction.
    The clothes 'falling' of the actress while she is walking, changing into other clothes
    Clothes falling of her when she is getting out of the car
    Green screen shooting, 3D matchmoving, 3D animation, corrective warping, morphing and masking.
    All of these are advanced techniques which you won't be able to pull of on your own, even if you had worked with AE for years already. This requires a qualified team and a lot of planning and involves much more than just throwing on a few effects on possibly poorly shot footage...
    Mylenium

  • What effects were used in this video?

    Hello!
    Is anybody able to tell what sort of effects / filters were used in this video - or how to achieve something similar?
    http://vimeo.com/23655494
    Thanks!

    Anyone read the comments? Might be easier to direct questions to the creator but I don't understadn the language they're using: dope, fly, sick, flarp. Adjectives from Hitchhikers Guide?
    bogiesan

  • Wonder what effects were used to make this?

    I'm making a version of this with a different logo.  Anyway, it *seems* like an emboss, but it isn't one I've encountered before.  Doesn't seem like any of the out-the-box emboss emboss options to me.  The gradient isn't a problem....except in regards to the emboss.  It has a very sexy, chiseled, sharp look to it that it pretty hard to recreate using homemade gradients and built-in emboss features (that I know of).  Any thoughts?  Thanks, buds.

    It seems like there's a lot going on here.  There's that chiseled, metallic emboss that is most clear on the "O".  But there also seems to be a 3D effect maybe (although it could be a copy of the logo an a separate layer I suppose).  The emboss around the type is strange to me in how it is viewable at every angle.  As mentioned, I figured out the gradient pattern for the face of the logo (pretty simple to do with the brush tool) but that galdern emboss just blows my mind.  It looks like it was made with either a modified stroke, a copy of the logo an another layer, a 3D effect, the basic hard emboss or all of the above.  It's really well done to the point that it just looks abstract to me in terms of technique.  And even the emboss has what appears to be some kind of gradient applied.  I'm too much of a photoshop simpleton at this stage to figure it all out though. 
    This is as far as I managed to get:
    As you can see, it lacks that crisp look.  Hmmm....

  • I am having flickering issues on both my timeline and when i render a clip when i drop and adjust a three way color corrector on a clip

    I am having flickering issues on both my timeline and when i render a clip when i drop and adjust a three way color corrector on a clip

    See if anything here helps:
    https://forums.adobe.com/search.jspa?q=premiere+pro+color+correction+flicker

  • HT4191 I have lost several days notes with the note app. What could be the issue? I have attempted to sync with my email account but noticing appears in my email. I thought this would act as a backup. Also how do I verify where the notes were being saved

    I keep losing notes once I've added them. I don't know how to confirm where they are being stored. I'm wondering if the storage could be full. Also tried to sync with my yahoo account thinking that might help. But not sure how I get existing notes to sync with the account....they didn't  show up once I turned that feature on.

    were using icloud?
    you can check to see if there by logging into your account at icloud.com

  • Flickering Issue with RGB Curves in Adobe Premiere CC (2014) version

    I've been an Adobe Premiere user since Premiere 6.5 and have never encountered any serious issues with the software. However in this most recent Creative Cloud update I am have a flickering issue when using RGB Curves, the color correction effect I use most often. When the effect is applied, there seems to be a shift in the shadows between a "crushed" black and a "flat, or faded" black every other frame. I've been using this latest update for about a week and haven't had any other issues aside from this one.
    Unfortunately this is huge issue at the moment due to a deadline I am facing in which RGB Curves has been used as the primary color correction tool on the entire project (multiple episodes). I would simply revert to a previous version of CC but I know that the new updates are never backwards compatible. Since the project has been saved in the CC (2014) update, reverting to previous software versions would be impossible. I am currently exploring exporting the XML from the CC (2014) projects and importing it into a previous version of the software.
    Please let me know if anyone out there is experiencing any similar issues or if there are any suggestions on how to solve this issue. Thanks!

    I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
    Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
    I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
    I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
    PPCC 2014 8.0.1
    Win 7 Pro

  • TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

    I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
    I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
    The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
    The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
    The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
    Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

    I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro.  Shipped straight from Apple, it is firmware version 1.03.  I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back.  when this happens I am still able to connect to and use the Mac via remote connection.  But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac.  This may be a separate issue, so I'll also post it standalone...

  • HT4528 flickering issues

    i am having flickering issues with my screen lately and i adjusted the brightness and have done many resets and i cant get it to stop.  there is also blurring of lines from white lettering to dark screen. does anyone know a fix for this issue?
    thanx

    Hey anr8384,
    Thanks for the question, and great troubleshooting so far. I understand you are experiencing issues with your iPhone 4s display. The following resource outlines troubleshooting steps for these symptoms:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1. Try turning iPhone off and then on again.
    2. Verify the issue is not content related, by viewing different content.
    3. If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Flickering issue with interactive buttons

    Hi all,
    I have an interactive pdf file that is 40 pages long. I have some navigation buttons on each page, which are white triangluar shaped arrows, and they contain black rollover and click states.
    I am finding however that the buttons states (rollover) seem to flicker randomly on and off when the cursor is hovered over the button. It looks very buggy. It's simply meant to turn black, and stay black when the cursor is on the button.
    Has anyone experienced this and know of a way that I can solve this flickering issue? It's driving me totally crazy and is the last remaining issue preventing me from finishing this project and being able to distribute the file.
    I know I can just disable thje rollovers, however we need them for usability purposes.
    Any feedback or guidance is appreciated.
    Thanks,
    G

    Hi Glyphism,
    I agree Bob's responses seem unnecessarily hostile. This is a huge problem! I just purchases CD 5.5 design premium, paid @ $700.00 for the upgrade and all of the buttons and interactives in a 4-month long project were operating just fine. When I ran the Acrobat update and tried to do my latest test, all of the buttons are flickering, and I cannot adequately test my 48 page interactive pdf! I have spent months on this project, it is now due on tuesday (Oct 4th), and at the eleventh hour, I am stuck with buggy product UPDATE of all things. Why? this is absolutely unconscionable for Adobe to let a bug like this go through. I am pulling my hair out. Wish I could UN update. Steve, you seem to be very helpful on this community - any ideas? HELP!

  • Flickering after adding shadow and highlight effect

    I seem to be getting a flicker, in any shot that has had the shadow and highlight effect added. It is as if premiere flashes from an uneffected frame and to a frame after "correcting" with shadow and highlight. Sometimes hardly noticeable until I have "make movie" and play it as an avi.
    regards

    Bill Hunt wrote:
    Well, as with most of the "auto" Effects, things work well, only if everything stays the same, like lighting, etc.. If one has a Clip, where lighting, exposure, white-balance, etc. changes, then the auto Effects WILL "pulse," or "strobe." It's sort of like the old days, with auto-aperture, and "seeking" for exposure.
    Lock down the camera, and do not change the lighting, exposure, or white-balance, and the auto aspect of Highlight & Shadow (plus most other "auto" Effects), will work just fine.
    I use Highlight & Shadow fairly often, but seldom on its "auto" adjustment - I almost always manually set the parameters manually.
    Good luck,
    Hunt
    This thread isn't long, and clearly in the several posts above, we discuss that the bug (which Adobe refuses to fix after years of bug reports) occurs regardless of whether automatic or manual control is being used.  So you are not offering a solution; Adobe needs to do that.

  • Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

    Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

    Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

  • In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

    Hi JohnDory,
    The information side-bar from iPhoto has been removed in Photos App, and so it's been converted into a pop-up window showing both the exposure, aperture and so technical photo parameters, as well as the comments, faces and LOCATION for that photo.
    This small floating window is shown whenever you click the button in the app title bar, right clicking a specific photo or pressing ⌘i
    If you open the albums view (clicking in the name of the album list, NOT an album name, you can see in your left sidebar - which can be shown or hidden) and press ⌘i without selecting a specific photo the Info pop-up will show the map for your whole library (as well as the total amount of photos, videos, GB used, etc)
    So, I'm afraid the "Locations" view (which I really loved) from iPhoto has been ripped off... and we can only get "some sort of locations view" by this method.
    As for locations... there is no option for manual geotagging (so, setting location to a specific photography which doesn't have it yet)... that really ****** me off 
    Regards,
    braincasualties.

Maybe you are looking for