Flickering problem on screen - 3000 series N200 laptop

Hello!
I have a 3000 series N200 laptop (0769 type) for 3 years. Approximately 3 months ago, there was a screen problem that the screen had white vertical gridlines. Service replaced the chipset of the graphical card.
Yesterday, a flickering problem has been appeared. I updated bios and display drivers from below link.
http://support.lenovo.com/en_US/downloads/default.page?
Could not get a solve with those updates. Then, I dismounted the front cover of screen. Re-assembled the LVDS FFC cable of the LCD display a couple of times, problem continued. Then, re-assembled the inverter cables. It also did not provide a solution.
>See the problem photo (1.jpg) at below link.
https://docs.google.com/open?id=0BweTh37k3ZRSQWYxRFNIWWpGSFE
Please advise about this matter.
Thanks.

Hello suguz and welcome to community,
As you have already updated the video driver and BIOS then you can check with adjusting the monitor refresh rate to 60Hrz.
Kindly check the same issue in BIOS mode and if issue continues then it might fault with Lcd display.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Lenovo 3000 N200 Laptop (0687-75B) has no DVD-RW drive detected under SATA in Vista Ultimate.

    I use the Windows Vista Ultimate DVD (with Auto-activation) to install OS on the Lenovo 3000 N200 Laptop, however, no DVD-RW drive after successful OS installation. I have try both compatibility or AHCI mode but the same result occurs. (Both Windows updated and Lenovo update OK)
    When I install Windows Ultimate with choosing internet activation, DVD-RW drive can be found.
    Anybody has idea?

    Hi Duck3,
    Thankyou for the website. I actually went on this one: http://www.laptoprepair101.com/laptop/2006/02/22/troubleshoot-fix-laptop-video-problems/
    Check out the Laptop LCD screen is solid white color example. This is what happens to my screen and sometimes the 2nd example happens also. I'm also thinking its the cable because whenever it does happen, I find that adjusting the position of the lid (opening the lid and closing the lid) fixes the problem. Also, one example on the other website said to try touch around the borders of the screen and see what happens - Touching around the borders does nothing.
    I'm thinking cable.
    I will try replace the cable after I buy new hinges and let you know how I go.
    Thanks,
    Dean.S
    Lenovo 3000 N200 0687-A11: T5450(1.66GHz), 2GB RAM, 120GB 5400rpm HD, 14.1in 1280x800, Intel X3100, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 10/100 Ethernet, Fingerprint reader, Camera, 6c Li-Ion, Windows 7 Ultimate!

  • LENOVO 3000 N200 LAPTOP graphics memory doesn't exceed 128mb on Windows XP

    i have a lenovo 3000 n200 laptop  model 0769-a58
    it is equiped with mobile intel gm 965 chipset " X 3100 "
    under windows vista the graphics memory reads up to 384 mb with shader v. 3.0
    while when i install windows xp the graphics memory doesn't exceed 128 mb with shader v. 2.0
    i already tried the latest graphics drivers from intel.com & the latest bios driver from lenovo.com
    i even upgraded the RAM to 3 GB
    i would be thankfull if anyone answers my problem

    My guess is that it IS a Vista problem, since other devices
    work, and you have tried your new devices on a different
    system.
    Some one else may have a different solution, but that is
    where I would concentrate my troubleshooting.

  • Having problems watching a tv series on iTunes on my macbook pro. bought from iTunes on this device but when i go to play it all it does is have a black screen and nothing happens or plays at all. any suggestions?

    having problems watching a tv series on iTunes on my macbook pro. bought from iTunes on this device but when i go to play it all it does is have a black screen and nothing happens or plays at all. any suggestions?

    Hello toddy7,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes: How to install the latest version
    http://support.apple.com/kb/ht5654
    Mac: Choose iTunes > Check for Updates.
    Have a nice day,
    Mario

  • Connecting my 3000 n200 laptop to CRT TV

    I am wanting to connect my 3000 n200 laptop to my TV, I know my laptop has a 7 pin svideo socket and a VGA socket, am I right in saying that a 7pin svideo to 3 rca cable,  will that connect to the TVs  Yellow,red,and white socket and is there anything I need to do to the Laptop or will it just work when the cable is connected.
    Thanks Graeme

    sorry, I have already started erasing the drive, because I wasted a lot of time trying to fix this without erasing it. none of the keys worked for me except F1 (thankfully), so I could enter BIOS and change the boot order. I used the software UltraISO (free to try) to burn the ISO image for HDFT on the USB. but when I try to boot from it, I get some options for which I don't know the answer, so I left without answering them, then it throws some errors and shows me the menu, then I did quick and full test both of which completed successfully (it doesn't clearly say passed though, just says operation completed successfully and gives some status code). finally I chose the "erase disk" for low level formatting, because I didn't want to waste any more time on this. hopefully I should be able to boot from the recovery CD after this and if I can't, then I have to pay someone for repairing it (I can probably buy a new one with the cost of repair). I checked the Lenovo site and it says there are no service offerings for this model. this laptop hasn't been reliable to me ever since I bought it. the battery is dead as well and I need to order a new one. right now I am using it without the battery.

  • HT4623 problem with screen touch when during writing or opening icon the screen is flickering

    I have problem with screen touch, when I touch the screen to write something or open icon the screen is flickering and keyboard or icons begin jumping

    @ wesleyyin,
    certainly strange. Some questions to help with the diagnostics;
    Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
    Can you try disabling the TrackPoint to see the problem goes away?
    Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Screen display problem with Lenovo 3000 N100

    Hi,
    My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
    In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
    Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
    Senthil.

    Lose / pinched  wires possibly.
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
    I had to re-seat mine , and I still have to wiggle the upper right corner .
    A common issue I here,although I just purchased a second used N100 and the screen has no issures.

  • Touch pad inoperativ​e after start up 3000/N200 Laptop

    Hi,
    HELP!!! Lenova 3000 N200/laptop.....hour  glass freezes and/or pointer does not respond/or temporarily works after a couple of clicks post windows start up. Accessed safe mode/settings/hardwardware...reinstalled driver....
    Not sure what FN key resets touchpad/if any....Assistance appreciated...Thx
    Debbie

    Hey there Kin,
    Im not sure I understand the issue. Do you receive any error messages when you log in? To me this sounds like a software issue. If everything works normal pressing a button I would assume all the hardware is fine.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Dell Inspiron 11 3000 series

    I have an acer aspire one that has been trucking along for nearly 6 years now with almost continuous use (about a year of non-use time in there, but that's it). I use it primarily for taking notes in class and such, but it also sees a lot of programming and other use since I take it to campus each day and also on trips. In this time, I have lost almost all the feet and now screws are slowly disappearing. It also has started to have some overheating issues when the heatsink seems to shift positions slightly (it shuts off within 90 seconds when this happens). In addition, I find myself wishing quite often that it could do things like stream video properly (without jittering) and compile the kernel (it takes FOREVER on that tiny hyper threaded single core atom processor). So, I've been looking at a replacement that can get similar battery life, has a similarly sized screen (preferably touch as well because I think that would be great fun to use), more than 1Gb of RAM (I can have about 7 tabs open on chrome and then it starts having troubles since I have swap disabled), and a better processor. My most basic requirement, however, is that the laptop be able to run arch.
    I've been looking at the Dell Inspiron 11 3000 series since it seems to have the best battery life of my various 11.6" options out there. The processor is a dual core Celeron which sounds old and antiquated to me, even though I believe its based on Haswell (not sure there). It also has 4Gb RAM and 500Gb hard drive. Another option, for $50 more, is a pentium processor which sounds even more antiquated, but is still based on Haswell.
    http://www.dell.com/us/p/inspiron-11-31 … redir=true
    My question is this: Has anyone managed to get arch working on one of these things? I also imagine that the most new-fangled component would be the touchscreen, so does anyone know the general support of those for linux?
    Thanks in advance for any help.

    Hi,
    Does the WPF application develop by yourself? Please make sure that your application has no dependency issue, if your WPF application lacks of some libs or .Net framework, it cannot execute. Do you get any error message when you try to run it?
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • DC jacks; are they compatible with all 3000 series

    I would like to know if all the DC power jacks are the same or compatible for all the lenovo 3000 series notebooks?
    I have a lenovo 3000 C100 notebook, and the problem that I am experiencing is that the unit dose not power up when
    the power button is press. here's the rundown of the problem; when I plug the power cord onto the laptop the indicator
    ligth for the power is on, but when I press the power button to on, the power indicator turns off and the laptop does not
    turn on at all, the only time the power indicator turns on is when I disconnect the power cord from the laptop and plug it
    back on. I also try it with the battery without the AC cord, the indictor lights for both power and battery is on, but when the
    the power button is pressed both indicator lights will flash (one at a time ) for at least 2 seconds and does not come back
    on at all and the laptop still does not power up at all. I have also tested the unit with another different battery and AC power
    cord from a same working 3000 C100, still the same issues. so I figure that it has to be the power DC jack, check lenovo
    website, but found none for the C100. so I want to know if other DC jack from let's say the T4 or T60, Thinkpad can be use
    as replacement part for my unit. my laptop is only a year and a half old. I would be very gratefull for any kind of help.
    Thanks

    there are not many motherboard for Lenovo 3000 laptops on sale on the web, the only place where you can get it, is through Lenovo parts service... i would suggest you sell your laptop for parts and then get a new laptop, it would be probably be more economical that way then getting a new motherboard through Lenovo. 
    Message Edited by wjli2 on 10-15-2008 09:04 PM

  • W510 Gaming Problem - Black screen

    First, I did some search before I post, and I found someone had a similar problem, but did not found any solution for it.
    I have the  similar problem as mentioned on:http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W510-crashes-during-heavy-CPU-GPU-usage-possibl.... Black screen, keyboard no longer function, and I can hear the cooling fans slowing down, HARD DRIVE STILL FUNCTIONING, as I can see the HDD light is flashing.
    Only thing I can approve is that this problem is not caused by heavy CPU or GPU use or overheat, because my computer behaves different on different games.
    Here are some games that will cause this problem. All my games are licensed.
    Plant VS. Zombie:
    -Problem occurs while launching the game on FULL SCREEN mode.
    -After edit registry to WINDOWED mode, the game works well.
    Left 4 Dead 2:
    -Problem occurs while launching the game first time.
    StarCraft 2:
    -Game successfully launch on both FULL SCREEN and WINDOWED screen.
    -I have been play SC2 for a lot of times, for different time period amunt of time and this problem only occurred for once when I was in the middle of a battle.
    GTA 4:
    -Problem occurs when I play this game for 2-4 hrs.
    This problem NEVER OCCURRED on: CS1.6, Red Alert 3, COD4 & 6, Metro 2033
    Also my computer passes all the test mentioned on the other post.
    HERE is my comp hardare info:
    OS: Windows 7 Ult 64-bit (6.1 Build 7601) [SP1], I have same problems also before SP1.
    Sys Model: 4318CTO
    BIOS Ver: 1.00PARTTBLX (System BIOS Version: 6NET74WW)
    Processor: Intel(R) Core(TM) i7 CPU Q820 @1.73Ghz
    Memory: 8192MB
    DX verison: 11
    Graphic: NVIDIA Quadro FX 880M (1600x1900)
    All my driver have been updated to the lastest stable release version.
    Anyone have any suggestion for this weird problem???
    Solved!
    Go to Solution.

    Never mind, thx for ppl who read this post.
    The problem solved.
    My vid driver was outdated, i thought it was the lastest version because "Automatically find drivers for my NVIDIA products" on nVidia website never notify me for update.

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • Is Data recovery from a damaged DVB-3000 COT notebook/laptop possible?

    I replaced a  hard drive for a DVB-3000 COT notebook/laptop. There are no additional cables to plug the old drive to attempt data recovery. Are there any external adaptors to attempt data recovery? Will I need software?
    Any advise or link is appreciated
    This question was solved.
    View Solution.

    Hi,
    If you wish to use your old HDD as an external HDD to recover data, you can use one of the external enclosure like one of these:
      External Enclosures for HDD's
    My suggestion, spend few dollars more to get the one with USB 3.0
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Flickering problem with Apple TV

    I am suddenly having flickering problems after updating Apple TV.  The box has worked fine for several months though I did have this same problem when I first got it in February.  I have a Panasonic 37' viera.  I have unplugged both the TV and the Apple TV box, reset it a number of times.  Don't know what to do.

    I'm having the same issue, albeit right out of the box.  I hooked up my Apple TV according to the instructions, have no other issues with my wifi, and the HDMI and power cables are all securely connected.  My TV's also a Samsung, experiecing the same "flickering" of audio.  In addition, during set-up, the screen was also flickering to white while inputting my wifi info.
    Am hoping swapping it out in store will fix the problem. I was so excited to get my AppleTV in the mail and everything else Apple-to-TV has been working great. (I had my ancient black MacBook -turning 6 in June- hooked up with zero connectivity problems.)  Wondering if this will be an ongiong issue? Had decided against AppleCare for such an inexpensive addition to my home, but maybe I should re-think that decision...

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

Maybe you are looking for