Flickering Screen and Lack of Full Screen Support, Flickering Screen and Lack of Full Screen Support

Hi,
I ran into a few things related to using my Bootcamp MacBook Pro 15” 2011 that I purchased 2012Mar. Having issues on the Mac side, with an external monitor. I bought a ViewSonic VX2753mh LED monitor, hooked it up to my laptop, started in Mac OS and seemed to be going good, able to get 1080p, 1920x1080 res on the monitor even though the 2011 MacBook doesn’t have that resolution on the actual attached screen. BUT, the Viewsonic started to intermittently turn off and back on, in addition when I tried to play a movie (or even a slideshow) in full screen (not mirrored), so that I could surf and watch the movie or slideshow, the full screen version of either would be placed back on my laptop screen while the external monitor had a generic grey with vertical lines screensaver pop up, or vica versa. If I played the movie in a small screen it was ok. Have heard a lot of issues with “flickering”. As for the application situation, maybe that’s something I don’t know about yet since I’m new to Mac. Can I play something like slideshow or a movie in full screen on an external monitor while I surf or type on the laptop monitor? Any ideas on either issue?
Thanks in advance !!!

Ok, so I solved my full screen problem with VLC, both slideshows of my pics running full screen on external moniter while I work on laptop, and with movies, still getting my external monitor flickering on and off, other threads stop around May, is there anything new ?

Similar Messages

Installed mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full - recovery mode says mac and recovery HDs locked - verify disk says recovery ok - repair says no live support?

Installed Mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full -recovery mode says mac and receovery HDs locked - verify disk says - recovery ok - repair says no live support?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Photoshop Elements 11 Organizer: Full screen view of lower quality than with PSE 10 and before?!

Upgrading from PSE 10 to 11, I noticed that when I watch my images with the organizer in PSE 11 in full screen view mode (F11), while the images load faster, they are shown in a lower quality than in PSE 10 or any other version of PSE that I owned before. In PSE 11, after the initial viewing in full screen (in the "fit screen" mode), when I click with the mouse on an image to display the "100%" view, there is a delay and the program says "Loading...", after which the 100% view in the full screen mode appears. When I then click another time with the mouse on the image to get back to "fit screen" mode, I get an image of better quality than during the initial view!
So it seems like the program first gives a faster, but lower quality view of the image in full screen mode, and only after the user requests a 100% view, it actually loads the image with full detail, which is then preserved when going back to the "fit screen" view. This is a serious issue for me, because I also use PSE organizer to present my pictures to other people, and I don't want to show them some lower quality versions of my images, but the full quality ones, without having to first choose "100% view" and then go back to "fit screen".
How can I make the PSE 11 organizer give me a full-quality full screen image right away, as this used to be the case in PSE10 and before?
(I have both versions, PSE 11 and PSE 10, now on the same computer and tested this to confirm that the PSE 11 initial full screen view is of lower quality than the PSE 10 one. Also in PSE 10, there is practically no delay for displaying the "100%" view afterwards, indicating that the image was loaded with full detail right away.)

- Update:
* Adobe's senior support level has replied to me about this issue as follows:
"Thank you for contacting Adobe.
When you press the F11 button, Organizer 11 uses the Bicubic
interpolation mainly because it is less processor intensive compared to
Bicubic Sharper, and it helps to create the preview on the fly, rather
than based on the thumbnail cache.
When you zoom out from the 100% view, Elements Organizer uses Bicubic
Sharper. This is because Bicubic Sharper is used for image reduction, so
if the 100% view is larger than the available screen space, it will need
to shrink. The Bicubic Sharper images may look more crisp however, Like
any sharpening algorithm, Bicubic Sharper introduces halos and
edge-enhancement artifacts. Those halos are typically slight, but any
further sharpening (which you'll need when preparing an image for print,
for example) will exaggerate them.This is expected behavior. The
Organizer isn't great for determining exact quality, I recommend you to
use Elements Editor for this purpose.
Thank you,
Bobby Johnson,
Adobe Technical Support."
* My reply on this to Adobe is:
"Hello Bobby,
thank you for your reply. Now at least we are talking about the same thing.
Why I am wondering about the choice to use the "Bicubic" algorithm when pressing F11 in PSE 11 is that all previous versions of PSE that I owned (which spans from PSE 6 to PSE 10) did use the "Bicubic Sharper" algorithm right away when pressing F11. So apparently Adobe didn't worry about processor intensity of this algorithm then, and computers are getting all the time more powerful.
It is true that in some situations, the "Bicubic Sharper" algorithm may introduce halos and edge-enhancement artifacts, as you write. On the other hand, especially on smaller resolution screens, the results of the "Bicubic Sharper" algorithm may look more crisp and lively, while the ones of the "Bicubic" algorithm may look more flat and lack fine detail. This is not only my personal opinion, but as I have brought up this topic in several forums, I can see that I am not alone here.
So assuming that the question about preferring "Bicubic Sharper" or "Bicubic" as a default algorithm when pressing F11 is partly a matter of taste, and partly a matter of the hardware the user has available, why can Abobe not give the user an option to choose which one he/she would prefer? For instance, F11 gives full screen view with "Bicubic" applied, and CTRL+F11 with "Bicubic sharper"? Or make this an option in the preferences?
As I am using the PSE organizer also to present pictures to other people (and I know many people who use it that way too), I would like to show them my pictures as sharp and detail-rich as possible. Therefore, I would highly appreciate an option as described above to be implemented in the PSE 11 organizer via an update. It should be fairly easy from a programming point of view, since both algorithms are already contained in the program anyway."
* If you support this suggestion of mine as stated above, please also contact Adobe accordingly! The more support requests they get for this, the more likely it is that they will implement this update! You may mention my case number 0184046323 for reference.

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

Priscilla,
if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work

After I tried to update my ipod to iOS 5, my ipod screen turned to the screen of the cherger cord pointing to the iTunes symbol. when I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and i did download t

After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.

Just what do you not understand?
Did you try:
Try to restore from another known-good computer and network.
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When I'm using Safari, acasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! ???

When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!

Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

What has the Apple support team done to the Top Sites screen? I just accepted an automatic update to be downloaded to my iMAC, and as a result of this "fix installation" the layout of the Top Sites screen has been terribly "destroyed"! What's the idea?

What has the Apple support team done to the Top Sites screen? I just accepted an automatic update to be downloaded to my iMAC, and as a result of this "fix installation" the layout of the Top Sites screen has been terribly "destroyed"! What's the idea?

If you are referring to the non-panorama , but rather the flat look, well that's what they did.
You can give your opinion here:
http://www.apple.com/feedback

My screen is magnified on full and i can't find the menu bar and the doc.

My screen is mangified on full and i can't find the menu bar and the dock.

Hello, Melorw44.
Try pressing the <esc> (Escape) key.
If <esc> doesn't clear your full screen, restart your Mac. When you launch Safari after the restart, the normal sized window should open.
BTW, three finger double tap applies to trackpads. From your responses, I infer that you are not using a trackpad. However, if you are using a wireless mouse (or other wireless pointing device), low batteries in the device might be causing your inability to control your view.
Message was edited by: EZ Jim
Mac OSX 10.8.2

My screen on my iPad has gone weird flickering colour and negative look about it

My screen on my iPad has gone weird flickering colour and negative look about it any ideas

Settings>General>Accessibility>Invert Colors>Off

My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?

My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?

- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

I no longer can get "Tools" or "Options" at the top of my screen. Google and Yahoo toolbars dominate the entire top of the screen. I want to get rid of them and go backk to a regular screen shot. How???

I can no longer get "Tools" or "Options" at the top of my screen. Google and Yahoo toolbars dominate the entire top of the screen. I want to get rid of them and go back to an original screen shot. How?

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

White screen with a crossed out circle which flickers to the Apple logo sometimes, but won't open. What can I do to open it?

Help!! I'm in Belize (not a good place to be with an Apple, as international as you may claim to be!) and my computer decided to "quit" thusly:
White screen with a crossed out circle which flickers to the Apple logo sometimes, but won't open. What can I do to open it? (I do have my recently backed up data with me, but no loading discs for my computer.
Hoping there is a solution,
Diana

The make of the disk doesn't really tell us how your data is being backed up onto that disk. Do you know what software it uses?
For example Time Machine copies files every hour in a way that is not bootable, but you can extract those files & get all your data back into a working OS.
Carbon Copy Cloner duplicates a disk in a way that is bootable - it would appear when holding alt at startup so you could use that to boot & inspect the state of the internal disk.
It may also be Seagate's own software that does something different.
Please try recovery mode, if that works you can try repairing the disk in Disk Utility.
OS X: About OS X Recovery - Apple Support
If that works, select Disk Utility & see if the internal disk can be repaired in the first aid tab.
Recovery mode can also download OS X & reinstall it, however you really need to know if the backup contains everything before that is attempted, otherwise you may lose data. The OS is also around 5GB so you may have issues if your internet is capped or unstable etc.
P.S.
I have no idea if this is helpful, but there may be help out there…?
http://belizeyp.com/Belize/I-T-Engineers-Consultants/profile
https://www.google.com/maps/place/VIP+wireless/@17.4938135,-88.1914518,4205m/dat a=!3m1!1e3!4m2!3m1!1s0x8f5c583ff12cb605:0x17a5a2f97fc838c3?hl=en
Search & ask around, you may find some help, try recovery mode first.

Flickering Screen and Lack of Full Screen Support, Flickering Screen and Lack of Full Screen Support

Similar Messages

Maybe you are looking for