Flickering screen and not enough time to write

My macpro screen flickers about ebery 15 seconds, and sometimes the curser stops and I cannot continue writing wihout relocating it?

Thanks. I will check on another computer see the results as indeed my computer is not brand new !
Thanks for the warm welcome and hope I will be able to help as well although at the moment it is me who need more help!

Similar Messages

My ipod screen shows not enough storage message but it will not let me close or go to settings. How do I get this message off to get to my settings to get to the icloud setting?

My ipod screen shows "not enough storage" message but will not let me click on the cancel or settings button. How do I fix this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Frozen locked screen stating Not Enough Storage

Ipod touch is on a locked screen stating Not Enough Storage. It cannot be shut off and is not acknowledged when I attach to computer

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
Wan

Wanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How do I get my iPad to open to the lock screen and NOT the passcode panel when I open my cover

When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it. When I click on that and try to UNcheck it, nothing happens. How do I get my iPad to open to the lock screen

When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it. When I click on that and try to UNcheck it, nothing happens. How do I get my iPad to open to the lock screen

Adobe flash player "Installation failed. Not enough permissions to write disk"

Hi there, my adobe flash player keeps on having issues. I downloaded the install file, open it and click install and it instantly fails and comes up with this message.
"Installation failed. Not enough permissions to write disk". Any ideas?

I think 2 options:
- try repair disk permissions
- try to do a flash clean install (https://forums.adobe.com/thread/1267823)

Splash Screen and not beyond... Closes abruptly? PE8 WinXP SP2

Splash Screen and not beyond... Closes abruptly? PE8 WinXP Professional SP2:
I got a lot of good info from the forum today, I do not have the internet at my house, which has added to this $100+ headache so I'm gonna try some stuff tonight and check back here tommorrow.
1. I would have tried uninstalling and re-installing but it came up with some serial number message, because I can't register online from my home I don't want to get locked out of the program or something, hey, it could happen knowing all this security crap.
2. I get the splash screen like others have, but I don't get the actual program: Premiere Elements 8, it runs through all the plugins on the application startup screen and then closes w/o any explanation.
3. After trying to get things working, "ElementsAutoAnalyzer.exe" is taking up 100+ mb ram in the background. What is this thing?
so far annoyed, but hopeful, still love my other Adobe Apps.
Feel free to address anything, I apreaciate it!! Even links to other articles, hopefully I'll figure it out tonight, I will post success / failure.
Thanks,
Robb

I want to add as much info as I can:
*Splash screen shows up, but only the video/image viewer/manager hub or whatever is able to open.
*I can open up the Premiere Elements program to the intro loading screen, once it loads the plugins it closes.
*I've tried every possible combination within the video manager hub thing to access the Video editing (Elements) software, it may show the loading screen then it closes with nothing, (the video manager remains open still).
Installed: Adobe Premiere Elements 8.0 from DVD 1, I did not install templates from Disc 2 or whatever.
*"Single Processor Detected" (I think that's what it said)
*I set up Service Pack 2, because it wouldn't let me install until I did this.
*I have Windows XP Professional
*I have plenty of HardDrive space. Don't think RAM is a problem.
What I'm going to do tonight:
*Install latest Quicktime 7.something, (downloaded on 11-01-09) from Quicktime.com
*Uninstall the unnessesary driver file mentioned in another post. (or disable it by renaming it)
*Hold shift key while opening program to clear cache, I read that somewhere.
*Possibly re-install software, hopefully I could get back in with my Serial.
-I printed out Trouble shooting section from Adobe.com.
Please leave suggestions, I'm sure I'm not the only one who will benefit.
Robb
(I got my receipt, I really don't want to use it)

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

How do you find a notification for Ask to Buy for Family Sharing once it is off your screen and not in drop down Notification Center?

How do you find a notification for Ask to Buy for Family Sharing once it is off your screen and not in drop down Notification Center?

Welcome to the Apple Community.
I don't believe you can.

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

How to disable iMac screen and not to put it into sleep?!!!

I would like to play a movie on my iMac but to watch it on my LCD TV. How to disable iMac screen and not to put it into sleep. PLS have in mind that ctrl+shift+ eject does not work, it makes my iMac screen go black as well as the tv screen.So far, i have red many articles concerning this subject, but no one seems to have the right answer. I simply can´t believe that apple did not think of it, as it is nothing new ....
Thanks

My brother has eight cats, so your not along. Fortunetly his go outside.
I have been talking to the people over at macforums and they had some good thoughts. One guy suggested going analog and soldering in a rocker switch on the cable connecting a hub to the computer, turn off switch turns off keyboard and mouse.
I was prepared to try that but a great idea came along. Arch, you might be interested in this too. Buy a cheap (found one locally for $20) usb kvm switch that takes one usb keyboard and mouse and connects it to two pcs/macs and only connect one of the outs to my system. There is a button to switch between the two, so when I want to disable the keyboard and mouse, I just switch it to pc2, which is not connected to anything.
Cheap and easy solution. I wish I could of figured out how to do this with software, since there would be no money if it was freeware, but I guess you cant win them all.
Thanks everyone for chiming in!

I have Keynote 6.2 and when my Mac Pro is hooked to a projector I cannot get the presenter notes to show on the computer screen and not on the projected screen. Any ideas?

I have Keynote 6.2 and when my MacPro is hooked to a projector with a slide presentation I cannot see my presentation notes on the computer screen and not on the projected screen. Any ideas?

Somethings obviously gone wrong with your installation of Keynote.
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2 empty the trash: Finder > Empty Trash
3 Shut down your Mac, wait 30 seconds, then hold down the Shift key while pressing the power button
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4 Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6 when complete, restart the Mac normally, Apple menu > Restart
7 install Keynote from the Mac App Store
let us know if this helped

Firefox opens newe webpages in a new screen and not in a tab-blad

Even when i set it by options it mostley opens in a new screen ande not on a new tab-page. The last version before this new one, no problem. How it comes?

Did you check the tab setting:
* Tools > Options > Tabs: [X] "Open new windows in a new tab instead"
You can check the browser.link.open_newwindow prefs on the about:config page.
* http://kb.mozillazine.org/browser.link.open_newwindow (3)
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

I cant update my software as it always prompted me ,your start up disk is full and not enough space, when i had done the deleting some of my documents and stuff that i dont need it.

i cant update my software as it always prompted me ,your start up disk is full and not enough space, when i had done the deleting some of my documents and stuff that i dont need it.

I use CCleaner from the AppStore to delete the 'useless' stuff. It's free and works great for me

Iphone 3gs freezing/screen flashing between password screen and turning off timer. Any ideas what to do please?

can you help please? Phone having funny fit, screen flashing between password screen and turning off timer. Then screens merging.. Yuk!

Hey kathlovesparis,
First, I would reset the device:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Delgadoh

Flickering screen and not enough time to write

Similar Messages

Maybe you are looking for