Flickering screen, comes and go when I tilt the screen.

Heya guys. Got yet another problem with my MacBook (which I'm getting tired of by now :/).
I get a very annyoing flicker, comes when I tilt the screen. Doesn't matter in which position it's at, the flicker comes and go. I'ts a gamma-flicker, as in the light dims up and down.
As said a yet annoying problem, you got any suggestion for me? I bought my MacBook in July, so itäs quite old. I got the first few rev's so this one is just full of diseases. I already had it in for the random shutdown problem, that took 5 weeks. After that I've had minor, but yet annoying problems, andI'm really not in the mood to send my only 6 months old computer to service for a 2nd time.
Is there any chance I could negotiate myself a new rev of the MacBook, a C2D instead of this faulty product I got no if I claim this error along with the other hardware error I had to repair the computer for? Or do I just have to keep send this computer to service for repair? Any ideas or suggestions what I could do?

Sounds like it does need to go in again, this problem could be 1 of 3 things, the LCD itself, the Logic board, or the video cable. It is possible that Apple would replace for you, but unlikely for only two issues, more likely if you have APP. Only suggestion is give it a try and let us know how you get on. If you take it to your local service provider then ask them to assess which part is faulty, find out if they have it in stock, if they do let them repair, if they dont then ask for machine back until part comes in, then do repair, this will minimize the amount of time you are without a machine.
Hope this helps.

Similar Messages

  • Why does my screen come up dark when I press the camera icon?

    Why does my screen come up dark when I press the Camera icon?  I can neither take pictures nor look at the photos I have saved.

    Doulbe tab the home key to see the task bar.  Touch and hold any of those icons until they jiggle, then delete them by touching the minus sign.   Then reboot the pad by holding the sleep and home buttons until the apple logo appears.  Ignore the red slider.
    You either have another app open that is using the camera, or you just have too much stuff in memory.  The reset process should clear it up.

  • My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    Have a look at these. And please say what OS you have.
    http://support.apple.com/kb/ts1411
    http://support.apple.com/kb/ts1367

  • Whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

    whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red (-) to delete all apps from this list.
    - Press the home button twice when done.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

  • I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?

    I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?
    This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

    This is a followup to my own posting above.
    Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted.  I deleted the app from iTunes.  Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes.  I said yes and then synched.
    Readdledocs is now working again.  It is no longer frozen.  However, I have learned my lesson.  I will download only pdf's from now on.  I don't think it works so well with epub files.  The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

  • I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
    I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
    You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
    The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
    Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
    The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
    http://support.apple.com/kb/HT1535
    Please let me know how things are going.
    Cheers!

  • My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

    Hello there, Conorjl7.
    The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • What are the username and password when i click the ICM of JavaEE5@SAP

    when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministrator of NetWeaver04s and NetWeaver2004s?
    thank you very much

    Hello Guoging,
    you can login to ICM with username Administrator and password abc123. That is described in the start.html file, which you can find in the unzipped Downloadpackage of SAP NetWeaver Java EE 5 Edition.
    You can use NetWeaverAdministrator(NWA) or config tool to configure this edition. NWA
    needs to be installed separately. If you have a default installation, go to
    C:SAPJP1JC00j2eeNWAdmin and execute the file install.bat. Ensure that NetWeaver is running, enter user Administrator und the Masterpassword you chose during installation and wait around 20 Minutes or more. NWA is started automatically after installation has finished in your webbrowser.
    For more information on NWA read the Administrationguide
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a>

  • My computer is dead. the charger flashes green and orange when connected to the computer. can anyone assist please.

    my computer is dead. the charger flashes green and orange when connected to the computer. can anyone assist please.

    What happens when you press the power button?
    Try a SMC reset:
    http://support.apple.com/en-us/HT201295
    Ciao.

  • I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

    I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
    thanks.

    If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

  • Hi,i have a big problem,.my ipad2 is lost,i left in public place...and then when im using the find my ipad apps.i accidentally clicked the remote wipe button,is there still way to track my ipad .thanks..

    hi,i have a big problem,.my ipad2 is lost,i left in public place...and then when im using the find my ipad apps.i accidentally clicked the remote wipe button,is there still way to track my ipad .thanks..

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    When talking about a specific image posting the image may be useful.
    One can use a Layer Mask and add a white Layer underneath.

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

Maybe you are looking for