Flickr and Virtual Copy Problem..

I have photos uploaded to flickr through lightroom but if i create a virtual copy of a used image flickr gets confused because the filename remains the same and wants to update my image with an edit i prefer to keep separate.
Without creating a tiff or jpg of the original RAW file is there a way to avoid this?
Would love to be able to rename virtual copies but it's not possible right?
any solutions?
S

Thanks Sean..
Actually it did work but on the flickr side, i didn't notice until i logged on.. The Flickr side added a '2' to the virtual copy although Lightroom uses the original name/copy. So i guess it works, just a little confusing. I have not tweaked the virtual copy yet to see if it updates the '2' copy on Flickr or throws a wobbly instead
I used Jeffrey's plugin for sometime but eventually I decided to delete all my photos from flickr (new account anyway) and decided to go fresh with LR 3. It works really well and any tweak i make get's republished without deleting any previous comments or data. Jeffrey's just doesn't have that same visual impact and integration. The LR version has a few quirks but seems stable enough for solid use... Just need to be smart with it because pilot error can make problems.
S

Similar Messages

Editing Film Photos and Virtual Copy Problem

I just scanned some film in and then imported it to lightroom. I am now running into a problem when I go to retouch/edit the film in photoshop. When I scan the film in it scans in as a .tiff file. I first tried to edit just the original to see if it would save back into lightroom as .psd but it didnt it saved the original tiff. I want to have two copies, the original and the edited file. So second I tried to make a virtual copy and edit that one and save it but again it saved both the virtual copy and the original file with the edits that I made. I finally tried right clicking the original file and editing with edit a copy. This finally worked I was able to have a copy and the original file unedited.
My question is if I edit this way and have a bunch of edit with copies is my picture sizes going to double? (having two copies of each photo, one edited and one original)
Or is there a way to edit a .tiff as a virtual copy and not have it save the changes to both files.
hope this wasn't super confusing

Thanks Sean..
Actually it did work but on the flickr side, i didn't notice until i logged on.. The Flickr side added a '2' to the virtual copy although Lightroom uses the original name/copy. So i guess it works, just a little confusing. I have not tweaked the virtual copy yet to see if it updates the '2' copy on Flickr or throws a wobbly instead
I used Jeffrey's plugin for sometime but eventually I decided to delete all my photos from flickr (new account anyway) and decided to go fresh with LR 3. It works really well and any tweak i make get's republished without deleting any previous comments or data. Jeffrey's just doesn't have that same visual impact and integration. The LR version has a few quirks but seems stable enough for solid use... Just need to be smart with it because pilot error can make problems.
S

Itunes and cd copying problem

hey guys
just wondering if anyone has had similar problems to me...
when i put an audio cd in my cd drive (real cds), and try to copy, sometimes on a particular track it gets stuck, and after it gets stuck the cd drive keeps spinning and stopping, then spinning and stopping (etc)... if i try to close itunes it goes into the spinning rainbow and it wont close... usually i have to force quit it, but that doesn't stop the cd from spinning... i then have to either put it to sleep and hope the cd stops spinning, or i have to force a shutdown and turn it back on...
if i try it again the track does it again... i can copy all the other songs but that one... i dont know if it happens to be that the cd is scratched or something (because the cds i tried to copy i guess arent the BEST condition, but not scratched in a way that wouldnt work on my pc)...
oh.. actually i just spammed my eject button after force quitting itunes and my cd popped out... bu yeah.. anyone know anything about this? had similar problems or know how i can possibly fix it?
its happened to two of my cds, and ive copied over about.. hm... 5 cds? any help would be mucho appreciated!

A good thing to try is to take the same cd's into an apple retail store and attempt the same "rip" there.
If they encounter the same issue then you know where the problem lies, but if all goes well at the store then you've got more work to do.
Try playing back the same tracks on your computer to see if there's any skipping when they're played.
It could be something relating to iTunes, so it may help to try the rip in another user account.
If it happens in two accounts it might be worth it to attempt a PRAM reset, as I've used it to clear up some weird optical drive issues in the past, but try things in the order I've listed and hopefully you get somewhere.
PRAM reset: http://docs.info.apple.com/article.html?artnum=2238

Virtual Copy problem in Collections

Sometimes, but not always, when I create a Virtual Copy in a Collection, the Virtual Copy will not appear in the Collection, but it will appear next to the file in its folder.

I have not seen that. When I create a virtual copy including a soft proof copy in a collection, so far they have all appeared. Of course, if I make a virtual copy in a folder, it will not show up in a collection unless I put it there. iMac, OS 10.6.8.

Leopard - QMaster and Virtual Cluster problem

Hi guys,
Up until yesterday I had my MacPro Octo running under 10.4 where I did succesfully set up a Virtual Cluster using 4 instances for Compressor. It worked as a charm and my MacPro was doing it's job perfectly.
Today, I made a bootable backup of my 10.4 install and installed 10.5 using the erase and install options ( clean install ). I installed all my software again and tryed setting up my Virtual Cluster again, using the same settings I had under 10.4. Sadly I can't seem to get it working.
In the QMaster Preferences pane, I have the QuickCluster with Services option checked. For the compressor entry in the Services I have the Share Option checked and used 4 isntances for the selected service. The Quickcluster received a descent name and the option to include unmanaged services from other computers is checked.
I have the default options set in the Advanced tab, ( nothing checked except log service activity to log file and Show QMaster service status in the Menu Bar). I then started the Cluster using the Start Sharing button.
Now I open u Compressor and add a file to process ( QT encode to iPod ), but when I hit the Submit button, my Virtual Cluster doesn't show up in the Cluster Dropdown. If I now leave the Compressor GUI open for 5 minutes, it will eventually show up in the list, and I can pick it. Sadly, picking it from the list at this point and hitting the Submit button makes Compressor Hang.
I checked my logs, but the only thing concerning Compressor I could find is this :
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:41 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'], server [tcp://10.0.1.199:49167]
4/12/07 20:12:41 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'
4/12/07 20:17:55 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488705.075513 218488675.075652) 1'], server [tcp://10.0.1.199:49167]
I tried Stopping and then Restart Sharing and I noticed the follwoing entries in my log :
4/12/07 20:23:26 compressord[210] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[211] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[213] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterca[269] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterqd[199] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:27 QmasterStatusMenu[178] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489009.603992 218489007.604126) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'
Batch Monitor immediately detects the cluster being active again, but Compressor doesnt, leaving me only This Computer available in the Cluster drop down when submitting a batch.
In my Activity Monitor, I notice that CompressorTranscoder is not responing ( the 4 CompressorTranscoderX processes are fine ) and the ContentAgent proces isn't responding neither.
Does anyone have any clue on what I could check next or how I could fix my problems ?
Thanks a lot in advance,
Stefaan

Bah, this is crazy, today it doesn't work anymore. Yesterday my cluster was showing up in the Dropdown window, and I could submit a batch to it, and it got processed over my virtual cluster.
Today, after finishing the second part of my movie, I tried it again. I didn't change anything to my settings, my machine hasn't even rebooted (just recovered from sleep mode) and my cluster isn't showing up at all anymore. Even the Qmaster menu doesn't show it
Guess, I'll have to wait out until it appears again, or try a few things out

Another Mailman and virtual domains problem... mailbox does not exist

Hi,
this is yet another thread about virtual domain mailinglist with mailman.
To sum up:
- OpenDirectory account "[email protected]" -> mail delivered
- Deleting this account and creating a mailing-list "test11", opening the admin interface to change the host "server.domain.com" (which is the primary host of the machine, so each mailinglist is created with this host) and replacing it with "virtualdomain.com"
- sending an email to "[email protected]" -> following error:
Jan 18 14:12:23 server postfix/qmgr[74872]: 698E5BF735: from=<[email protected]>, size=691, nrcpt=1 (queue active)
Jan 18 14:12:23 server postfix/pipe[74882]: 698E5BF735: to=<[email protected]>, orig_to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.14/0.01/0/0.13, dsn=5.6.0, status=bounced (data format error. Command output: test11: Mailbox does not exist )
- adding back the OD account "[email protected]" -> mail delivered to inbox (not to mailing-list recipients)
- now if i delete the mailinglist in Server Admin then send an email to "[email protected]" -> following error (seems obvious):
Jan 18 13:18:49 server postfix/lmtp[74275]: A9B7CBF45F: to=<[email protected]>, relay=server.domain.com[/var/imap/socket/lmtp], delay=0.16, delays=0.13/0/0/0.03, dsn=5.1.1, status=bounced (host server.domain.com[/var/imap/socket/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
IOW, it looks like somehow the mailinglist aliases are being lost somewhere.
Postfix forgets to delivers the incomming mails to Mailman, doesn't it? According to lots of forum searchs it could be forced by using one of those two commands:
sudo /usr/sbin/postalias
sudo /usr/sbin/postmap
Unfortunately I dont know how they work precisely and can't find X.5 accurate information so I hope you can guide me through this step.
Also I don't know how to track the incomming mails at the moment they are dispatched to either an OD account (so it's delivered or generates the 550 error) or a Mailman list (so it's looking for aliases and so on).
Any help will be appreciated.
Config:
- in /etc/postfix/main.cf
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
virtualaliasmaps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
- in /etc/postfix/virtual_domains
virtualdomain.com allow
- in /var/mailman/data/virtual-mailman
# LOOP ADDRESSES START
[email protected] mailman-loop
# LOOP ADDRESSES END
# STANZA START: test11
# CREATED: Sun Jan 18 13:55:03 2009
[email protected] test11
[email protected] test11-admin
[email protected] test11-bounces
[email protected] test11-confirm
[email protected] test11-join
[email protected] test11-leave
[email protected] test11-owner
[email protected] test11-request
[email protected] test11-subscribe
[email protected] test11-unsubscribe
# STANZA END: test11
- in /var/mailman/data/aliases
# The ultimate loop stopper address
mailman-loop: /private/var/mailman/data/owner-bounces.mbox
# STANZA START: mailman
# CREATED: Sun Jan 18 14:11:53 2009
mailman: "|/usr/share/mailman/mail/mailman post mailman"
mailman-admin: "|/usr/share/mailman/mail/mailman admin mailman"
mailman-bounces: "|/usr/share/mailman/mail/mailman bounces mailman"
mailman-confirm: "|/usr/share/mailman/mail/mailman confirm mailman"
mailman-join: "|/usr/share/mailman/mail/mailman join mailman"
mailman-leave: "|/usr/share/mailman/mail/mailman leave mailman"
mailman-owner: "|/usr/share/mailman/mail/mailman owner mailman"
mailman-request: "|/usr/share/mailman/mail/mailman request mailman"
mailman-subscribe: "|/usr/share/mailman/mail/mailman subscribe mailman"
mailman-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe mailman"
# STANZA END: mailman
# STANZA START: test11
# CREATED: Sun Jan 18 14:11:53 2009
test11: "|/usr/share/mailman/mail/mailman post test11"
test11-admin: "|/usr/share/mailman/mail/mailman admin test11"
test11-bounces: "|/usr/share/mailman/mail/mailman bounces test11"
test11-confirm: "|/usr/share/mailman/mail/mailman confirm test11"
test11-join: "|/usr/share/mailman/mail/mailman join test11"
test11-leave: "|/usr/share/mailman/mail/mailman leave test11"
test11-owner: "|/usr/share/mailman/mail/mailman owner test11"
test11-request: "|/usr/share/mailman/mail/mailman request test11"
test11-subscribe: "|/usr/share/mailman/mail/mailman subscribe test11"
test11-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe test11"
# STANZA END: test11
- in /usr/share/mailman/Mailman/mm_cfg.py
MTA = 'Postfix'
POSTFIXSTYLE_VIRTUALDOMAINS = ['virtualdomain.com','mail.virtualdomain.com']
add_virtualhost('virtualdomain.com', 'mail.virtualdomain.com')

I've finaly solved the problem by myself, mixing postfix-style aliases.
Since it's quite long I wrote a tutorial, it's here:
http://spip.ashorlivs.net/notepad/os-x/article/virtual-host-mailman-w-os-x-serve r
Hope it can help someone else.
Regards,
g.
Message was edited by: ashorlivs

RAM and Virtual RAM Problems with Fireworks

I'm working on a Fireworks file with 25 pages and some heavy graphics. However, I've turned some of the heavy objects into symbols which are repeated from page to page.
The file is 17 Mb and my Virtual Memory bumps to 3.4 Gigs when I open this file and things are slow and often crash. I'm working on a Mac with CS4 and have 4 Gigs of RAM. The actual ram is 2.27 GB. Seems like a crap ton of Ram? Plus it's running slow and crashes regularly.
Please advise if there are settings I can change to improve the performance.

I have this same problem.
We design websites like shops and stuff. We'll need to work out all the pages and show them to our clients.
I have just finished a site with 45 pages. I have to cut this up in 3 different files. Highly annoying. And working on a windows system to so you get my irritations.
I get the feeling that this is a result of the buggy-ness in Fireworks. The contact with the Adobe help-team is dramatic. I don't understand that you sell a product this expensive and not give a good service afterwhile.
I must say that i don't have any problems with the other programs. Only Fireworks. The rest is very good (to end with someting nice)

PowerPC G5 10.5.2 and Virtual PC problem reading .iso

Hi there,
I don't know if I've posted in the right area, but all I'm trying to do is boot Virtual PC 7.0.3 with a factory disc of XP Home I have. I created an .iso using Toast 8, then try to capture disc image, but I still get the same "OS not found. Install an OS on this hard drive". Any ideas? Thanks in advance.

Yes, I tried booting directly from the disc, but no dice there either. I did some research on other message boards and the consensus seemed to be to create an .iso.
Neither is working for me, so I have not a clue...

No virtual copy, no stack, and no edit. Whats left?

purchased lightroom 2.0, clean install everthing going well until I came to edit raw photos in photoshop! The raw opens in photoshop, I can make my corrections, but when I close the file and return to lightroom, lightroom will accept the new psd file. It states that it cannont read the file and that it is in a incompatible format??? go figure! using photoshop cs3. If I try to use the virtual copy function, I get an internal error in a null timestamp. Using xp pro 32 bit. photoshop all current along with xp pro.
On an newer system I have with all the same programs however, depending on which drive the images and catalog are on it will bring the image back in from photoshop after edit (only if catalog and image are on c drive) but will not stack! States that the files are located in 2 different folders, but the sit next to each other in the same folder????
However on an older laptop, I don't have any of these issues. it all works fine, return import from photoshop, virtual copy, and stack, except that the laptop is to slow to actually use for production
Following threads, this seams to be a common bug, but thought my experience may help others experiencing similar issues

For about 2 weeks I had this problem and today I fixed it!
Didn't fancy doing a Reset of Firefox as I'd only just done one a few months ago, manually.
Basically, I uninstalled ZoneAlarm. I've been a ZoneAlarm fan for years but the software just got worse and worse and for about a year this weird thing pops up while I'm in Firefox by pressing CTRL Enter or something, it's like ZoneAlarm has put some kind of layer between me and the browser.
Anyway, uninstalled it, it rebooted and did a scandisk which did find and fix a few errors too, so could also be that.
But I'm happy without ZA now as I've found a better one called Online Armour... non of that sneaky trying to install toolbars in your browser rubbish of ZA.
Hope this helps!
I can't tell you how good it feels to have copy & paste fully working again!

Is it possible to save the adjusted virtual copy image and discard the original?

I have made a virtual copy of an image which I then adjusted in LR to the way I want to keep it. Now I am wondering either if there is a way to apply those adjustments easily to the original so I can then discard the virtual copy, or should I save the virtual copy and delete the original? I just don't need two images, one which is not a keeper. I also don't want to delete the original if the virtual copy depends upon its existence.
I want to keep images down to the one's I want and am working to delete those images which I will never use. Whichever is the best way to handle the above situation will enable me to do some much needed housekeeping to my catalog.
TIA,
Ken

You guys are pretty slick, no two ways about it. I think I'm learning Lightroom, but I'm just happy with it helping in my own situation. Some of you have far-reaching understanding of this wonderful program. Lightroom is a 'must' as I see it.
Ian, I've tried your method, as it seems easiest and most direct, I selected the VC and chose the menu item 'make copy original' and it did a 'conversion' or so it looked like, but the images still say 1 of 2 for the original with no modifications and 2 of 2 for the cropped and adjusted version. I am skeerd to delete the '1 of 2' version which I believe 'was' the original version before I chose the menu item. Now I'm not sure what I have.
Hal P Anderson, I tried your method and it did transfer the settings but not the crop, which I can understand why. I re-cropped the 1 of 2 to match the 2 of 2 version which is the virtual copy, and then selected the virtual copy and hit delete - the dialog box confirmed I was deleting the VC by asking if I wanted to delete this virtual copy. I felt more comfortable with that arrangement and now I'm sans VC with the original possessing the new settings.
Thanks to you both,
Ken

Recently I have switched out computers and had copied/ transferred my I ITunes library to the new computer and encountered problem. Many of the songs in the library were purchased from my old email address of that I no longer use nor did I remember the o

Recently I have switched out computers and had copied/ transferred my I ITunes library to the new computer and encountered problem. Many of the songs in the library were purchased from my old email address of that I no longer use nor did I remember the old password in order to authorize playing from the new computer. Request advice/assistance to where I am able to play songs acquired through lost password?

This is a user to user tech support forum. Posting questions and getting responses here is the extent of the support.
If you want phone support, call Apple and pay for it.
Posting your phone number of a public forum is not smart, I have asked the moderators to remove it.

Syncing and copying problem

when i want to sync my ipod i get really frequnently an error massage saying: could not copy file to ipod. unkown error 69.
so i read the faqs, but it is not the problem that the mp3s are broken or something. when i try again, the problem occours with an other mp3.
and the other problem is: i can't copy larger files to or from my ipod without crashing it.
i have reseted my ipod for several times and there is no change. please help

I believe that you have already read the following
http://docs.info.apple.com/article.html?artnum=302684
You must find the corrupted music files on your iTunes and delete them before you do the syncing.
You can try move the songs to a seperate playlist and do the syncing. Please do 50 songs per time until you find the corrupted files

Nano3rdgen Copying playlist from itunes to ipod and it says it can't copy certain songs to ipod cos of file type.These problem songs all from same album, all ACC file type and all copied fine when I copied the album itself few weeks ago-help!

When copying playlist from itunes to nano3rd message comes saying 9 of songs can't be copied to ipod cos of file type. These 9 are all from same album, all ACC and all copied fine when I copied the album itselm some weeks ago. Rest of playlist was ACC too. P.S. album is a CD-R copied version-is this an issue? HELP I AM DESPAIRING!

I never laughed in all my life. Here I was, inserting the cd Dance with Me, thinking it's not going to copy the whole thing. yeah, right.
Sure, it prompted me, Do I want to replace the songs, so of course I said "no, don't replace the songs". and guess what it did. It copied the whole cd (at least I got my two songs).
I went into the itunes library, and sure enough, all the songs were there twice. So what did my intelligent brain think of? I just unchecked the doubled songs and stuck my ipod into my computer and it synched up and I got what I wanted.
Now what did I do wrong when it prompted me. I clicked on "don't replace" and it replaced them anyway.
Am I dumb? or is itunes stupid?
thanks, Melody

What do I do if I get "Running out of Application Memory" when no applications are open except finder and just copying pictures to Seagate?

I cannot copy pictures to a Seagate as I get the out of memory notice with the only option to restart finder,repeatedly. I looked at older discussions and did not see a definitive fix, but many posted this, so I will as well:
Many discussions were too advanced for me. I have OS X 10.9.3
EtreCheck version: 1.9.12 (48)
Report generated July 23, 2014 at 11:57:23 AM EDT
Hardware Information:
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:23:21
Disk Information:
APPLE SSD TS512B disk0 : (500.28 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Mac (disk0s2) / [Startup]: 399 GB (99.03 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 100.42 GB (70.82 GB free)
MATSHITADVD-R   UJ-898
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) Support
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) Support
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) Support
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) Support
[loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.7) Support
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) Support
Problem System Launch Daemons:
[running] com.seagate.TBDecorator.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wyse.PocketCloud.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[running] com.wyse.MacCompanion.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.google.Chrome.framework.plist Support
User Login Items:
Dropbox
Internet Plug-ins:
LogitechHarmony: Version: 1.0.0.1 Support
LogMeInSafari64: Version: 1.0.660 Support
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.660 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
LogMeInSafari32: Version: 1.0.660 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Paragon NTFS for Mac ® OS X Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Mac: Disk size: 371.60 GB Disk used: 279.37 GB
Destinations:
Untitled [Local]
Total size: 931.19 GB
Total number of backups: 30
Oldest backup: 2012-05-18 05:12:38 +0000
Last backup: 2014-07-14 18:51:50 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 279.37 GB X 3)
Time Machine Backups [Local]
Total size: 2
Total number of backups: 26
Oldest backup: 2010-11-21 17:58:03 +0000
Last backup: 2014-07-14 19:53:01 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 371.60 GB X 3)
Backups.backupdb [Network] (Last used)
Total size: 930.87 GB
Total number of backups: 32
Oldest backup: 2013-11-19 00:45:22 +0000
Last backup: 2014-07-15 15:36:23 +0000
Size of backup disk: Adequate
Backup size 930.87 GB > (Disk used 279.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      5% WindowServer
      0% fontd
      0% LogMeIn
      0% configd
      0% aosnotifyd
Top Processes by Memory:
115 MB mds_stores
98 MB Google Chrome
82 MB Finder
74 MB Dropbox
49 MB WindowServer
Virtual Memory Information:
4.65 GB Free RAM
1.43 GB Active RAM
1.00 GB Inactive RAM
675 MB Wired RAM
999 MB Page-ins
0 B Page-outs

Your problem is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
(1) You have a long-running process with a memory leak (i.e., a bug), or
(2) You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination. In Activity Monitor, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table once or twice to sort the table with the highest value at the top. Repeat with the Virtual Mem column. If one process (not including "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more memory over time without ever releasing it.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.

Itunes allows library to point to other folders and not copy files - WHY DOESN'T iPHOTO?

Hopefully Terence Devlin and other experts will see this. I really am intrigued as to iphoto behaviour and seek some clarification.
I just waded through 13 pages of an old thread that was locked where Terence kept saying iphoto was all one needed to work with one's photos and kept getting called on the fact he would not answer the question "where are my photos" (photos = files) because it was so darn dangerous for anyone to touch the actual files in the iphoto library.
I have a use case I need help on and an example of Apple's utter inconsistency here.
Inconsistency: iTunes lets me create a library all the while pointing to the original files that *I* have imported and structured in a given directory/folder stucture. Yes it means I manually manage what is in itunes etc, but that's how I like it. The key thing is that itunes allows the choice to import (copy) files (which makes duplicate and doubles hard disk usage) or not.
iphoto does not allow that option.
I just converted to Mac from a PC and copied in over 100gb of photo files - some 16,000 photos. I import new pics to the Mac using Canon native software and store them accoring to a structure/taxonomy that *I* determine and want to control - not some software's predetermined idea of events or locations or whatever. In itunes I can make 'music' an 'audiobook' or I can make a podcast 'music', I can edit the metadata to order things in the 'library' as *I* choose and the itunes library is coole with this without havign ANY of the soruce files in its library. Naively, I thought iphoto would follow a similar philosophy.
Use case: I discovered that iphoto has some very effective functionality for management of my uploads and sets etc in Flickr, but to do so I have to import my pics, obviously. So I did import the whole 'Pictures' folder - not for a moment considering that Apple would be dumb enough to copy every pic and make a duplicate, or that I might not get the chance to say yes or no to this in the settings, as per itunes. Having looed for that optin and failed to find it I imported anyway to see what happened. After I realised that the Mac was heating up and files were being copied and I was going to lose another 100+gb of disk space I forced this to quit. And thanks to others on that other thread I found the iphoto library and deleted the whole thing, getting back 100bg of drive space. All I want to do is use iphoto for the Flickr sharing/management functionality - I have no use for it otherwise.
Why would Apple think that not having to duplicate files is ok for itunes but not a viable option for iphoto? Why would I want to double the disk space used for every photo I store? At the very least iphoto needs to come with a health warning that it should only be used to import from external devices and be the sole manager of photos, unless one wants to use double the disk space.
So if I want to use the sharing (i.e. Flickr uploading and management of sets etc) capabilities, should I import all or some of my folders, do my work and then delete the library each time to reclaim the disk space?

If I import photos to iPhoto, the originals are deleted? So if I import from a card I have taken from my camera or if I connect my camera directly, the act of importing into iPhoto wipes them from my card?
Again, you need to check your facts before getting indignant. This is simply not true. It's an option you have and not one I recommend using. But it's only an option.
Storage costs money and I do not want to have two copies of every pic on my hard disk - especially given huge filesizes of RAW files today.
No one is suggesting that you have two copies. You have your iPhoto Library and then you back that up. Again, less indignnation, more careful study.
I do use other photo managers (e.g. native Canon tools) quite happily and they are far less 'exclusive' - i.e. I can use different apps with the same native file structure.
Using other photo managers makes little sense, any more than having two address books. How do you keep them in sync. Your comment about file structure is important, we'll come back to that.
If I want to go back to a Windows PC or any other machine and want to retain the "manual" file labelling and directory structure that I have implemented and been using for years, it seems that having a reference library that *I* know the taxonomy of is actually an advantage if I want to go somewhere else.
If you want to retain exactly the same filing structure you have now, then don't use any Photo Manager. Stick to the file manager. You'll be missing out on a lot of options, but hey ho, it's what you want.
That said, if you want to migrate from iPhoto to a Windows Machine then that's what File -> Export is for, and you can export from iPhoto to a folder tree matching your Events.
And this is a big one: This is true of any Photo Manger. Especially one with lossless processing - iPhoto, Aperture, Lightroom et al.
Here's the principle: IT IS MY DATA AND I WILL DECIDE HOW IT IS LABELLED - WHAT THE FILENAMES ARE - AND HOW IT IS STRUCTURED INTO DIRECTORIES AND SUB-DIRECTORIES. I WILL DECIDE WHICH APPLICATION I USE TO DO ANYTHING WITH THAT DATA AT ANY POINT IN TIME
DId you stomp your foot while writing those block capitals too?
But here's the thing: It's your data then why the heck are you dealing with Files?
This is the key difference, and frankly, unless you can geet this you're always going to have problems with Photo Mangers.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
See? It's about the data and the data and the file are not the same thing. Organising your photos based on the files is like organising a shoestore based on the boxes and not the shoes.
And here's the thing: anything you want to do with your Photos can be done either with or via your Photo Manager.
And again, I strongly stress, this is true of iPhoto, Aperture and Lightroom.
And please note: either with or via... Want to use a 3rd party editor, that can be done easily and so on.
Let me correct you. "If you use an APPLE Photo Manager then it's the go-to app for whatever you do with your photos.
Doesn't matter who makes it.
Other Photo Managers may have more flexibility and enable greater user control."
Sure. iPhoto's a $15 app. Aperture is a $70 one. Adobe's Lightroom is about $150. Pay more get more options.
And remember where we came in here: You said you weren't able to choose where to store your files. You're wrong. You can. All I'm saying is that there's no point and more work to it.
For many - including me - the Apple way seems way too dictatorial -
Whoa. Apple are dictating nothing. You don't have to use iPhoto, you don't have to use a Mac. And remember:
...where we came in here: You said you weren't able t choose where to store your files. You're wrong. You can. All I'm saying is that there's no point and more work to it
Are Ford dictatorial demanding you steer the car using a wheel? Sheez.
and yes there are certainly advantages for some types of users of trusting one piece of software to do everything, however non-transparent it may be what it is doing or why, and with the dangers of trying to do ANYTHING else at all with one's photos.
And again, everything is quite transparent if you take a little while to understand it. You don't understand it because you're coming from a file management and not a data management perspective. Also no one is suggesting using "one piece of software to do everything". iPhoto leverages the Finder for storage, QuickTime for display, uses and Open-Source database and so on, it protects your original file like a digital negative.
iPhoto may well not be the app for you. That's especially true since you don't understand it and are confusing it with a file manager. That's fine. But please, stop saying things that aren't true.

Flickr and Virtual Copy Problem..

Similar Messages

Maybe you are looking for