Flickr Export does not manage color porfiles

You can look at these two pictures. Identical photos, one was exported with the "flickr" button and the other by export -> version -> manual upload. Anyone else experiencing this?
http://www.flickr.com/photos/46081098@N08/sets/72157625974089915/with/5459983393 /

There is not really a need for colormanagent on the web.* You should only use sRGB since:
1. Many web browsers don't even understand profiles other then sRGB, including the most used (unfortunately) web browser: Internet explorer.
2. 99% of people surfing the web don't have calibrated monitors.
*usually, the profiles conversion already happened before the upload, just make sure the version you upload is in sRGB.

Similar Messages

Flickr export does not recognize metadata changes

* I did publish some photos to flickr with the flickr publishing service
* Then I edited some metadata (GPS Data)
==> the flickr publisher does not recognize the changes, so the photos are not marked for "republishing"
it seems that the flickr publich services recognizes only changes in "capture" and "title".
that's strange, because if I had to explicitely mark each photo to "republish" I don't need a built-in publishing service

There is not really a need for colormanagent on the web.* You should only use sRGB since:
1. Many web browsers don't even understand profiles other then sRGB, including the most used (unfortunately) web browser: Internet explorer.
2. 99% of people surfing the web don't have calibrated monitors.
*usually, the profiles conversion already happened before the upload, just make sure the version you upload is in sRGB.

Appstudio exporter does not contain a valid signature

HI I am trying to install AppStudio plugin to work with InDesign but Extension Manager is throwing the following error...
appstudio exporter does not contain a valid signature !
I have updated all software.
(I am downloading new apps in the background)
I have a CC subscription

Hi,
please click "tools"->"preferences", unselect "Allow Extension Manager to access Internet" option, and then try to install it again.

ABNAN- Posting not possible (Asset does not manage postable areas)

Hi Experts,
I am trying to do a post capitalization creating a new asset using transaction ABNAN with the transaction type 400.
I get the Error " Posting not possible (Asset does not manage postable areas) "
Can some one help me with this.
Thanks in Advance
Vijayanth

Dear,
Check Asset master if it has depreciaiton areas activated.
Regards,
Chintan Joshi.

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

After updating to 4.4.2 the notification light does not change colors. How do I fix this?

After updating to 4.4.2 the notification light does not change colors. It only blinks one color. How do I fix it?

Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
NicandroN_VZW
Follow us on twitter @VZWSupport

Group asset does not manage area 01-Msge no. AA809 in AW01N-Parameter Tab

Hi All,
For my Client in Development Server,
When i select Parameter Tab- in t.c.AW01N.
The below error message is coming for all Asset Classes Assets.
Group asset does not manage area 01
Message no. AA809
Diagnosis
You have specified for the asset that depreciation area 01 is to be managed in group asset . However, depreciation area 01 is not managed on the group asset level.
Procedure
Correct your entry.
I have checked in
1.Specify Depreciation Areas for Group Assets(T.C.OAYM),
For depreciation area 01-Group Asset check box is not selected.
2. Specify Asset Classes for Group Assets(t.c.OAAX).
In this screen for all Asset Classes(except Group Asset Class), check boxes are not selected(for class consists entirely of group assets).
Please any one guide me how to solve this issue.
But there is no this type of error in Production Server.
Thanks in Adv

Hi
there has been a simular problem, this might help you:
This asset has 4 depreciation areas all attatched to Group asset
1665265. But, this group asset has only 3 depreciation areas. When you
would double click on Asset 1665268, you would come across Error Msg
AA809.
Group asset does not manage area 10
Message no. AA809
Blaz

Flickr plugin does not "replace" when uploading after elimination of Flickr Pro accounts

When uploading an image to flickr it has been possible for Pro accounts to re-upload a photo and replace an existing upload. This "replace" functionality keeps intact any comments, ratings, "favorites" etc that the photo has accumulated on the Flickr website since the original image was uploaded. The Lightroom Flickr plugin (authored by Adobe) has always correctly limited this "replace" functionality to Pro accounts (flickr did not allow the API call for non-pro accounts).
With the recent flickr policy change eliminating Pro accounts, flickr has enabled the replacement functionality for all users. However, the Lightroom flickr plugin still performs a check for a Pro account and does not attempt to replace a previously uploaded image if a user has a non-pro account (which is now all accounts that were not grandfathered in as Pro). The plugin currently uses the older behavior of first deleting the image and then uploading a new image, thus losing all comments, history, views, bookmarks etc that the old image has accumulated.
There is another non-adobe flickr plugin, and the author of that plugin stated on his web site that simply using the old Pro "replace" API call now works for normal flickr accounts.
I recognize that this flickr policy change happened recently, but I'd like to be sure that Adobe is aware of this change so that the next point release of Lightroom will include a change to the built-in flicker plugin to remove the check for Pro accounts and allow all users to replace photos. I used this feature a lot when I was a pro subscriber, and I think all flickr users of Lightroom would appreciate this change. It is still possible for all users to replace an image on Flickr by exporting to a jpg from Lightroom and then uploading the replacement through the web site, but enabling the plugin would obviously be better for customers.

I worked with Gokul from Adobe support, and we eventually stumbled into the solution.
The system clock was wrong!
Based on something Friedl says on the blog for his Flickr plugin, the Flickr authentication APIs will fail if the system clock is wrong. His plugin helpfully points out that the clock is wrong when you install it. It also reports the error that he gets from the Flickr APIs: HTTP 401 (not authorized). Unfortunately, Lightroom's builtin Flickr publishing plugin doesn't report any error, and it just fails silently.
In my case, Windows appeared to be displaying the correct time, but the time zone was incorrect, and my system time was actually 3 hours ahead. I reset the clock and timezone and restarted Lightroom. Now, the builtin Flickr publish plugin is working again.

Pages '08 Export does not honor the "Hide extension" checkbox

I have noticed that Pages '08, even with the latest update (3.0.3), does not honor the state of the "Hide extension" checkbox in the Export save dialog (or "sheet" that slides out from the title bar). Specifically, I have seen this happen when exporting to Word. When un-checking the "Hide extension" checkbox, the filename is displayed in the dialog with the .doc extension, but the file appears in the save folder (anywhere in the file system) without the .doc extension until I do a Get Info on the file and un-check Hide Extension in the Name & Extension section.
This is really annoying because I hate automatic hiding of file extensions in general, and I find it unacceptable with any kind of MS Office docs because my Windows-using colleagues can't seem to cope without a file extension they recognize.
Also note that this does not seem to affect the Save or Save As dialogs in Pages '08, only the Export save dialog. I can create a regular Pages document, do a Save As, uncheck Hide Extension, and I'll see the document show up in the file system with the .pages extension.
Is this a known bug in Pages '08? I can't find any mention of it in the forums. I also want to know if this is fixed in Pages '09. I've been looking for a way to report this as a bug, but am not having much luck.

LionMage wrote:
Is this a known bug in Pages '08?
Yes. just add the extension manually in the Finder.
I can't find any mention of it in the forums.
It has been mentioned many times but not lately.
I also want to know if this is fixed in Pages '09.
No.
I've been looking for a way to report this as a bug, but am not having much luck.
+Menu > Pages > Provide Pages Feedback+
Peter

Include in Export does not work in APEX 3.1

I have a report with many columns. On screen I only show several columns, but on export to CSV I want to include all columns.
However, when "Show on Report" is set to No, and I want to set "Include in Export" to Yes on the "Print Attributes" tab, it does not get updated.
It only gets updated when the "Show on Report" is set to Yes.
It also seems that the "Include in Export" on the "Report Attributes" tab is not in sync with the "Include in Export" on the "Print Attributes" tab the first time you access the "Print Attributes" tab.
Question: Does "Include in Export" only works for columns which has the "Show on Report" set to Yes? If Yes, how can I achieve the above mentioned?
Guido

Marc,
After some investigations the following can be concluded:
On the Report Attributes tab, pick a column, and set "Show Column" to Yes, "Include in Export" to Yes, and no conditions.
I do not want this column to be printed, so on the Print Attributes tab, set the "Column Width" to 0.
When you run the report, you will notice that the column is not included in the export to CSV and not printed.
Setting the "Column Width" to a value greater than 0, the export to CSV works fine, but the column is also printed.
You can have a look at page 1 at at http://apex.oracle.com/pls/otn/f?p=261 (demo/ankpm)
Thanks Patrick for your solution (:REQUEST LIKE 'FLOW_EXCEL_OUTPUT_%'), it works great. The column is now not show on screen but included in the export to CSV. However, you have to set the column width to a value greater than 0.
An enhancement request for 4.0 could be to also have a property "Include in Print", and that this property and "Include in Export" are not dependent on the "Show Column" value.
Guido

Oracle form query mode does not change color to blue

Hi, I have created a custom form and using query mode in it. However on hitting F11, the record does not change to blue, instead it turns white. Can someone please guide me as to what I should be doing to get this right?
Thanks for your responses.

The fact that it doesn't change color when you "Enter Query" mode tells me your Custom Form does not conform to Oracle Application Programming Standards. I recommend you visit the Oracle Applications Documentation web site, choose your EBS version and scroll down and look at the Oracle Applications User Interface Standards for Forms-Based Products and Oracle Applications Developer's Guide to ensure your Custom Form conforms to Oracle Standard.
Also, I suggest you always use the TEMPLATE.fmb (or if you can't find this form, use the APPSTAND.fmb) as the starting point of any Custom Form. This will ensure you have the minimum required objects and code in your form.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

Interlaced export does not functioning

Motion 5: All preferences are set to interlaced export. But the exported clip does not show fields.
It shows only frames. Selected Codec: Apple ProRes 422.

Make sure you have these windows set correctly... (field rendering checked)

Exporting does not export the music tracks.

hello- i am needing help exporting my movies from Adobe Premiere Pro 2014. When i try to export a movie, it does not export the music tracks. the audio is fine, but it is not exporting the music beds. any ideas as to why would be VERY helpful! thank you!
==============================================
Edited by moderator to trim the title down to the essential.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

New out of box Laser Jet M252dw does not print color, only black

New out of box, M252dw does not print in color and I can not find any option off to account for that.

Hi , Welcome to the HP Forums! I understand that you cannot print color with your HP laserjet M252dw, on Windows Vista. I am happy to help! Please, try the steps within this print quality guide, Fixing Print Quality Problems for HP Color LaserJet Pro M252n, M252dw, MFP M277n and M277dw Printers. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

User export does not export all users....

Hi all,
EP60 SP2 P4 HF8. Datasource is Database.
I'm exporting all users via the Export/Import iview in the User Administration role. However, the export file only shows part of all the users, not all. SAP Note 801393 descibes this problem exactly, but the proposed solution does not work either.
Any ideas?
Kind regards
Marcel Rabe

Hi,
I've got the same issue.
When using the export function from the portal, the user list is not complete.
The stream seems to be cut off when too many users need to be exported(Length/size issue)?
Did someone find a solution?
Thx,
Regards,
Steve Rymenants

Flickr Export does not manage color porfiles

Similar Messages

Maybe you are looking for