Flickr export does not recognize metadata changes

* I did publish some photos to flickr with the flickr publishing service
* Then I edited some metadata (GPS Data)
==> the flickr publisher does not recognize the changes, so the photos are not marked for "republishing"
it seems that the flickr publich services recognizes only changes in "capture" and "title".
that's strange, because if I had to explicitely mark each photo to "republish" I don't need a built-in publishing service

There is not really a need for colormanagent on the web.* You should only use sRGB since:
1. Many web browsers don't even understand profiles other then sRGB, including the most used (unfortunately) web browser: Internet explorer.
2. 99% of people surfing the web don't have calibrated monitors.
*usually, the profiles conversion already happened before the upload, just make sure the version you upload is in sRGB.

Similar Messages

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change.

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except the last Library on my computers will make Virtual DJ recognize it. I tried renameing the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around in there. Any help would be appreciated.

Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

VC 7.0 does not recognize Metadata for custom RFC

In SAP R/3 I have created a RFC that has no IMPORT or EXPORT parameters, only TABLES defined as "DATA_OUT". The RFC code finds and generates the values to fill "DATA_OUT".
Tested the RFC in our R/3 System, works fine. Then went to Visual Composer. Data Services does list the new RFC. I click and drag into my iView. The data service appears in my iView. For a split second I see what may be the "retrieving Metadata" popup, but it disappears too quickly, cannot tell what it was. At no time does a "Define Data Service" popup appear that would allow me to select Input or Output choices.
Now the Data Service icon appears in the iView but lists an Input port. It does not show an Output port at all. I expected only an Output port.
SAP Portal Admin can go into System Administration, Portal System Landscape and create an iView using the same SAP RFC. It recognizes the Output metadata. He can run a test of the data service and this RFC provides correct output as expected.
I do not understand why VC is behaving differently than the Portal. Any ideas ?
Regards
MPersson

MPersson,
May be worth to check one thing: you might have this RFC in a previous version without Output. For some how VC composer did not get your last version.
Regards,
Gilson

External Editor does not recognize LR changes

I have PS CS5 installed, and after moving to LR4 I find that editing from LR to PS does not carry over all the changes made in LR. The crop is retained, but all lighting and color changes are not. AND, I can't get to the screen the asks you if you want to edit a copy with or without LR changes. So I'm stuck. Any thoughts?
Thanx

Chuck Bragg wrote:
Thanks to both of you for the answer. It is a bit tricky finding the 6.7 update - the regular update page only goes to 6.6.
It's because it's still a RC. Once the official release is made available, the update will occur as usual.

Flickr Export does not manage color porfiles

You can look at these two pictures. Identical photos, one was exported with the "flickr" button and the other by export -> version -> manual upload. Anyone else experiencing this?
http://www.flickr.com/photos/46081098@N08/sets/72157625974089915/with/5459983393 /

There is not really a need for colormanagent on the web.* You should only use sRGB since:
1. Many web browsers don't even understand profiles other then sRGB, including the most used (unfortunately) web browser: Internet explorer.
2. 99% of people surfing the web don't have calibrated monitors.
*usually, the profiles conversion already happened before the upload, just make sure the version you upload is in sRGB.

LCM does not recognize the changes made in Currency dimension

Good day all,
We are doing a Planning application migration from Prod to QA environment. Yesterday, the target planning application's currency dimension was set to Multiple currency. Then earlier today, my colleague updated the target application's currency dimension to single currency. Now, every time we perform the migration, LCM says that:
"Data storage cannot be stored to Label Only, Dynamic Calc, or Dynamic calc and store for entity versions, currencies and user defined dimension in multi currency dimensions".
Does this mean that LCM still sees the currency dimension of the target application as multicurrency? May we know how to fix this?
Thanks in advance.

As you've noticed, Muse will clobber any changes made to the pages Muse works with that have been done outside Muse*. Are the page title features provided not enough for your purposes? Does the information in this thread help at all: Re: How do I add Meta tags to pages?
* Excepting changes made through 'In-Browser Editing'.

My apple ID and password is now different and cloud does not recognize the changes. How do I change it on Imac and Macpro

Can anyone tell me how to change my default ID on Cloud, to my new ID and passord? I have the problem with both computers. The Imac and Macpro. There are no options in the box to make changes.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

Purchase Order Carryforward (FMJ2) Does Not Recognize Assignment Changes

In our year end processing, we ran FMJ2 to do purchase order carryforward. We have about 15 documents which had erroneous carry forward amounts. In each of these documents, there was a change in account assignment in the sender fiscal year. Fields which had assignment changes included Fund, Commitment Item, and/or Funded Program.
When FMJ2 did the carryforward, it appears to have ignored the assignment change, and ignored any subsequent activity applied to the new assignment.
It brought forward only activity applied to the original assignment.
Has anybody else enountered this? Can anybody tell me what may be causing this, and how to fix it?
Thank you.
Will assign points for solution.

Hello Aoife,
If you need to perform a carryforward with changes in FM Account Assignment, you should define a Derivation Strategy for reassignment on closing operations.
So, what you could do here is to reverse the Carryforward using FMJ3, and then define this derivation strategy for reassignment and perform FMJ2 again.
You don't specify which is the release you are working on, but nevertheless, please find more information in the SAP Library / Funds Management for SAP_APPL 470-EA-PS200:
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/f0/ca5716260211d28a430000e829fbbd/frameset.htm">Funds Management</a>
and choose Chapter "Closing Operations-> Derivation Strategy for Reassignment with Closing Operations".
I hope this helps.
Kind regards,
Mar

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.
I was able to register it though.

Not a surprise. The Acrobat 8 product family passed into End of Support back in 2011.
Be well...

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) HELP!

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) and requires the password to do anything. Everytime I go onto the ICloud page it shows my old email and requires the password, but I can't exactly type in a password because that won't work. I can't find a way to change my email or delete ICloud.

If the old ID is an earlier version of your current ID, do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

TS1702 I had to change my password and now my iphone says it does not recognize it

I had to change my password and now my iphone says it does not recognize it...

Hello KaitlinHertz3,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

HT204053 I just changed my Apple Password and icloud does not recognize the password.

I just changed my Apple Password and icloud does not recognize the password.

To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials. When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud. Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.

I forgot my password and my birthday and email does not recognize. please help me, it happen when I buy my new iphone5s and change the Apple ID of my old iPhone 4.

i have a new iPhone 5s, it does not recognize my password, when I try to restore it my birthday and email does not recognize, it only happen when I change my old iPhone 4 and change the Apple ID of it. please help me, all my phone now does not recognize my password.

To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Flickr export does not recognize metadata changes

Similar Messages

Maybe you are looking for