Flickr publishing service and privacy settings
Hi,
I recently purchased Lightroom 3, and am loving it. I've played around with the Flickr publishing service, and it seems that at the moment there is a limitation in that it is not possible to specify permissions for individual photos, but rather, an overall choice for the publishing service. I usually upload an album with restrictive permissions then make some of the photos public, so I was wondering whether if I upload an album via Lightroom 3 with permissions set to 'Private', and I change the permissions on the flickr website to 'Public', then if in future I re-upload the image after modifying it, will the permissions be reset to 'Private', or will Lightroom respect any privacy settings set directly on Flickr?
Thanks for any advice,
Thomas
I don't know the answer to your specific scenario - my simple advice is "try it".
But I do have an alternate idea if you try it and find that it doesn't work as you expect.
I have 2 publish services both based on the Flickr plugin. (You can add additional ones by right-clicking on the existing Flickr publish service, and choosing [Add Another Publish Service via "Flickr"]
One's set up to upload as public, the other is set to upload as private. Under these 2 publish services I have my various photosets (public & private).
You can also use this method to support multiple Flickr accounts (family vs. business, etc)
- Robert
Similar Messages
-
Flickr Publish Service Colour Space
I've read a couple of threads about setting colour spaces when exporting, including this thread:
http://forums.adobe.com/message/2942130#2942130
For many years I've used Photoshop Elements as my main editing software. The images that I've edited in PSE and then uploaded to Flickr using Flickr Uploadr all show the colour space as sRGB when I look up the EXIF data on Flickr.
Since I've started using LR 3, I've noticed that the images published to Flickr from the LR Flickr publish service don't show any colour space when I look up the EXIF data in Flickr. I can't see anything in the Flickr publish service settings that allows me to embed a colour space.
What colour space are the published images in? Am I missing a step somewhere in LR?Thanks for taking the time to reply and for the very helpful information.
I'm aware of Jeffrey Friedl's plugin and I might eventually go that way, but for the moment I'm just trying to understand the built in publish service.
I didn't have the Hard Drive publish service set up, so I did that with sRGB as the colour space and Minimize Metadata unchecked. I checked the settings for the Flickr publish service, Minimize Metadata was also unchecked there. The ability to set a colour space is definitely present in the Hard Drive publish service but absent from the Flickr publish service.
After doing those things, I published some more photos to Flickr, again no colour space when I view the EXIF in Flickr. I still don't know whether no colour space is embedded, or whether sRGB is embedded but undisclosed. -
Unable to set up Flickr Publish Services in LR4.1
I have tried on numerous occasions and end with the same result. After I finish setting up the parameters in the Flickr Publish Services form I receive the "Lightroom needs your permission to upload images to Flickr" I click on the "Authorize" button and then I'm taken to my account within Flickr. Once i click on the "OK, I'll authorize it" button, I'm taken to: http://lightroom://com.adobe.lightroom.export.flickr/#?oauth_token=72157630835444112-9ff8c 3faeafcb667&oauth_verifier=84249d3a8099d4dd, where I get another pop up window that says "This web page cannot be displayed"
No matter what I do I cannot get the publish service to work. I had no issues with Lightroom 3.6 using the same procedure. What has changed, or what am I missing? Please help. Thanks in advance.Hi
You will need to have different configuration in each service.bat file as the SVCNAME must be unique across multiple instances, for example:
JBoss Server 1 service.bat config:
set SVCNAME=CCP_RC
set SVCDISP=CCP - RequestCenter
set SVCDESC=JBoss instance for RequestCenter
JBoss Server 2 service.bat config:
set SVCNAME=CCP_SL
set SVCDISP=CCP - ServiceLink
set SVCDESC=JBoss instance for ServiceLink -
Can the Flickr Publish Service upload to existing Sets?
When publishing photos to Flickr, can I specify the photo to be put in a specific set within Flickr, i.e., photo publishes to my photostream and I want to place the photo into my "Ravelry set?"
How can I accomplish this or do I have to manually go into Flickr and add the photo to a specific set?
Thank you
Message title was edited by: Brett NNot to confuse things by contradicting Brett, but I just tried this, and it works fine for me. Payne1904, try this:
1. Set up your Flickr publish service in Lightroom.
2. In the header of the Publish Services panel in Lightroom, click the "+" button and in the Flickr section, choose "Create Photoset".
3. Name the Photoset the exact name of the existing Photoset that you want the photos to go into.
4. Add photos to the Photoset in Lightroom, and click "Publish".
The photos will be added to the existing Photoset on Flickr. Let me know if this doesn't work.
-Ben -
Publish Service and Collection Names
I am creating a publish service and need some information on the naming of publish collections.
I want to prevent the user from naming the collections anything but the name that is on the server. This needs to happen even on creation.
I know I can prevent the renaming by setting disableRenamePublishedCollection = false, but that does not help on the creation.
The best way to do this would to prevent the user from entering a name when they are creating a collection, I have yet to see a way to do this.
If not then need to set the name of the collection to the name that is on the server. I have tried this with no luck. http://forums.adobe.com/thread/662683?tstart=60
I cannot get the name of the collection to change right after it is created. It may change for a second then goes right back.
Anyone have any suggestions?
I thought of maybe making a thread that would wait a time then rename the collection, but I am lost on how to do that.I don't know if this will help, but:
the catalog:withWriteAccessDo function creates an SQL transaction, and if any error occurs before that function returns the catalog changes are rolled back. Also, no changes take place until that function returns successfully. So try code like:
local sts = LrTasks.pcall( cat.withWriteAccessDo, cat, ..., function()
change name
end )
then check the status...
If the status is good, but the name isn't sticking, then I don't have a clue...
Rob -
I Have discovered this in the security and privacy settings of my mac. Is it something I should get rid of ?
Login to another User account. Is it faster there?
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Collections/sub-collections and sets in Flickr publishing service
I have been searching in vain for a way to arrange the photo sets I upload to Flickr in folders and sub folders - just the same way I do it in Flickr with up to 5 levels of collections + sets.
What I want is something like this:
BIRDS
---------ORDER 1
-----------------------FAMILY 1
------------------------------------SPECIES 1 (Pictures in this level of folder/set)
------------------------------------SPECIES 2
-----------------------FAMILY 2
------------------------------------SPECIES 3
------------------------------------SPECIES 4
---------ORDER 2
-----------------------FAMILY 3
------------------------------------SPECIES 5
------------------------------------SPECIES 6
-----------------------FAMILY 4
------------------------------------SPECIES 7
------------------------------------SPECIES 8
Could someone please tell me if this already exists - in the program or as an add-on?
Thanks!Lightroom does not support what you're trying to do. You could check Lightroom Exchange to see if any third party plugins provide the type of support you want.
http://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=25 -
My 'Security and Privacy' settings won't open
Ever since installing OS X Mountain Lion, when I click on 'Security and Privacy' under 'Settings,' it just continues to say 'Loading Security & Privacy' but nothing loads. I cannot get into it at all (screen shot below)...
Does anyone have any ideas on what is going on?I called Apple and they had me re-install Mountain Lion. As of now, the 'Security and Privacy' setting is working again, but I did check out the console like you advised. Here is what was there after I cleared the display and went back in again:
8/7/12 7:18:07.000 PM bootlog[0]: BOOT_TIME 1344381487 0
8/7/12 7:18:51.000 PM kernel[0]: PMAP: PCID enabled
8/7/12 7:18:51.000 PM kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
8/7/12 7:18:51.000 PM kernel[0]: vm_page_bootstrap: 863197 free pages and 144419 wired pages
8/7/12 7:18:51.000 PM kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
8/7/12 7:18:51.000 PM kernel[0]: zone leak detection enabled
8/7/12 7:18:51.000 PM kernel[0]: standard timeslicing quantum is 10000 us
8/7/12 7:18:51.000 PM kernel[0]: standard background quantum is 2500 us
8/7/12 7:18:51.000 PM kernel[0]: mig_table_max_displ = 74
8/7/12 7:18:51.000 PM kernel[0]: corecrypto kext started!
8/7/12 7:18:51.000 PM kernel[0]: Running kernel space in FIPS MODE
8/7/12 7:18:51.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
8/7/12 7:18:51.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
8/7/12 7:18:51.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=5 Enabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
8/7/12 7:18:51.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
8/7/12 7:18:51.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
8/7/12 7:18:51.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
8/7/12 7:18:51.000 PM kernel[0]: calling mpo_policy_init for Sandbox
8/7/12 7:18:51.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
8/7/12 7:18:51.000 PM kernel[0]: calling mpo_policy_init for Quarantine
8/7/12 7:18:51.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
8/7/12 7:18:51.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
8/7/12 7:18:51.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
8/7/12 7:18:51.000 PM kernel[0]: MAC Framework successfully initialized
8/7/12 7:18:51.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
8/7/12 7:18:51.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
8/7/12 7:18:51.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
8/7/12 7:18:51.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0024
8/7/12 7:18:51.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
8/7/12 7:18:51.000 PM kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
8/7/12 7:18:51.000 PM kernel[0]: [ PCI configuration begin ]
8/7/12 7:18:51.000 PM kernel[0]: Sleep failure code 0x00000000 0x31000000
8/7/12 7:18:51.000 PM kernel[0]: console relocated to 0xf10030000
8/7/12 7:18:51.000 PM kernel[0]: PCI configuration changed (bridge=3 device=2 cardbus=0)
8/7/12 7:18:51.000 PM kernel[0]: [ PCI configuration end, bridges 7 devices 16 ]
8/7/12 7:18:51.000 PM kernel[0]: [ PCI configuration begin ]
8/7/12 7:18:51.000 PM kernel[0]: PCI configuration changed (bridge=3 device=2 cardbus=0)
8/7/12 7:18:51.000 PM kernel[0]: [ PCI configuration end, bridges 8 devices 22 ]
8/7/12 7:18:51.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
8/7/12 7:18:51.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
8/7/12 7:18:51.000 PM kernel[0]: rooting via boot-uuid from /chosen: EF7397DF-6793-3508-9EEF-D0678915DB72
8/7/12 7:18:51.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
8/7/12 7:18:51.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
8/7/12 7:18:51.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
8/7/12 7:18:51.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
8/7/12 7:18:51.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
8/7/12 7:18:51.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
8/7/12 7:18:51.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffee52076; max speed s800.
8/7/12 7:18:51.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Untitled@2
8/7/12 7:18:51.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
8/7/12 7:18:51.000 PM kernel[0]: Kernel is LP64
8/7/12 7:18:51.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
8/7/12 7:18:51.000 PM kernel[0]: hfs: created HFBT on Macintosh HD
8/7/12 7:18:08.844 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
8/7/12 7:18:08.844 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
8/7/12 7:18:51.298 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
8/7/12 7:18:51.305 PM launchctl[2]: com.apple.RemotePairTool: Already loaded
8/7/12 7:18:55.431 PM com.apple.SecurityServer[16]: Session 100000 created
8/7/12 7:18:55.501 PM configd[19]: ioctl(SIOCGIFCAP) failed: Device not configured
8/7/12 7:18:55.501 PM configd[19]: ioctl(SIOCGIFCAP) failed: Device not configured
8/7/12 7:18:55.503 PM configd[19]: setting hostname to "MALORIE-JANASEKs-MacBook-Pro.local"
8/7/12 7:18:55.508 PM configd[19]: network changed.
8/7/12 7:18:55.684 PM com.apple.SecurityServer[16]: Entering service
8/7/12 7:18:55.827 PM UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
8/7/12 7:18:55.000 PM kernel[0]: AGC: 3.2.6, HW version=1.9.21, flags:0, features:20600
8/7/12 7:18:56.398 PM hidd[63]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
8/7/12 7:18:56.482 PM fseventsd[64]: could not open <</.fseventsd/fseventsd-uuid>> (No such file or directory)
8/7/12 7:18:56.638 PM coreservicesd[37]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
8/7/12 7:18:56.000 PM kernel[0]: macx_swapon SUCCESS
8/7/12 7:18:56.998 PM com.apple.launchd[1]: (com.apple.bsd.dirhelper) Throttling respawn: Will start in 10 seconds
8/7/12 7:18:57.489 PM fseventsd[64]: log dir: /.fseventsd getting new uuid: 8DB7FF89-E45E-423B-953C-0DF895D2D798
8/7/12 7:18:57.728 PM hidd[63]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
8/7/12 7:18:57.000 PM kernel[0]: Waiting for DSMOS...
8/7/12 7:18:58.024 PM awacsd[73]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
8/7/12 7:18:58.445 PM digest-service[88]: label: default
8/7/12 7:18:58.445 PM digest-service[88]: dbname: od:/Local/Default
8/7/12 7:18:58.446 PM digest-service[88]: mkey_file: /var/db/krb5kdc/m-key
8/7/12 7:18:58.446 PM digest-service[88]: acl_file: /var/db/krb5kdc/kadmind.acl
8/7/12 7:18:58.884 PM awacsd[73]: InnerStore CopyAllZones: no info in Dynamic Store
8/7/12 7:18:59.191 PM aosnotifyd[91]: bootstrap_look_up failed (44e)
8/7/12 7:18:59.000 PM kernel[0]: BTCOEXIST off
8/7/12 7:18:59.000 PM kernel[0]: BRCM tunables:
8/7/12 7:18:59.000 PM kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
8/7/12 7:18:59.000 PM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
8/7/12 7:18:59.923 PM systemkeychain[92]: done file: /var/run/systemkeychaincheck.done
8/7/12 7:19:00.076 PM digest-service[88]: digest-request: uid=0
8/7/12 7:19:00.000 PM kernel[0]: Previous Shutdown Cause: 5
8/7/12 7:19:02.780 PM rpcsvchost[131]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/7/12 7:19:02.785 PM digest-service[88]: digest-request: init request
8/7/12 7:19:02.791 PM digest-service[88]: digest-request: init return domain: BUILTIN server: MALORIE-JANASEKS-MACBOOK-PRO
8/7/12 7:19:04.780 PM apsd[75]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/7/12 7:19:04.780 PM apsd[75]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/7/12 7:19:07.472 PM mDNSResponder[55]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12
8/7/12 7:19:07.477 PM appleeventsd[69]: main: Starting up
8/7/12 7:19:07.694 PM stackshot[45]: Timed out waiting for IOKit to finish matching.
8/7/12 7:19:07.681 PM com.apple.usbmuxd[41]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
8/7/12 7:19:08.356 PM digest-service[88]: digest-request: uid=0
8/7/12 7:19:08.356 PM digest-service[88]: digest-request: init request
8/7/12 7:19:08.357 PM digest-service[88]: digest-request: init return domain: TATE-S-IPOD server: MALORIE-JANASEKS-MACBOOK-PRO
8/7/12 7:19:11.803 PM configd[19]: network changed: DNS*
8/7/12 7:19:11.960 PM mDNSResponder[55]: D2D_IPC: Loaded
8/7/12 7:19:11.960 PM mDNSResponder[55]: D2DInitialize succeeded
8/7/12 7:19:12.011 PM locationd[59]: NOTICE,Location icon should now be in state 0
8/7/12 7:19:12.000 PM kernel[0]: fNumVRAMBlocks is 4
8/7/12 7:19:13.000 PM kernel[0]: NVDANV50HAL loaded and registered.
8/7/12 7:19:13.886 PM awacsd[73]: Exiting
8/7/12 7:19:14.000 PM kernel[0]: IOBluetoothUSBDFU::probe
8/7/12 7:19:14.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8218 FirmwareVersion - 0x0041
8/7/12 7:19:14.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
8/7/12 7:19:14.783 PM apsd[75]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/7/12 7:19:15.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor8086Device0046
8/7/12 7:19:15.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice0a29
8/7/12 7:19:16.350 PM UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 16395
8/7/12 7:19:16.350 PM UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
8/7/12 7:19:16.355 PM UserEventAgent[11]: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 15887
8/7/12 7:19:16.356 PM UserEventAgent[11]: Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
8/7/12 7:19:16.359 PM loginwindow[58]: Login Window Application Started
8/7/12 7:19:16.000 PM kernel[0]: DSMOS has arrived
8/7/12 7:19:16.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
8/7/12 7:19:16.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
8/7/12 7:19:16.000 PM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:0a:3d:d4
8/7/12 7:19:16.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address e4:ce:8f:75:d9:a9
8/7/12 7:19:16.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
8/7/12 7:19:16.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
8/7/12 7:19:16.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
8/7/12 7:19:18.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
8/7/12 7:19:18.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
8/7/12 7:19:18.137 PM airportd[154]: _processDLILEvent: en1 attached (up)
8/7/12 7:19:18.165 PM BBDaemon[77]: IOBSDNameMatching returned a NULL dictionary.
8/7/12 7:19:18.165 PM BBDaemon[77]: IOBSDNameMatching returned a NULL dictionary.
8/7/12 7:19:18.165 PM BBDaemon[77]: IOBSDNameMatching returned a NULL dictionary.
8/7/12 7:19:18.165 PM BBDaemon[77]: IOBSDNameMatching returned a NULL dictionary.
8/7/12 7:19:18.000 PM kernel[0]: createVirtIf(): ifRole = 1
8/7/12 7:19:18.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
8/7/12 7:19:18.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80293e5400
8/7/12 7:19:18.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
8/7/12 7:19:18.000 PM kernel[0]: Created virtif 0xffffff80293e5400 p2p0
8/7/12 7:19:19.564 PM digest-service[88]: digest-request: uid=0
8/7/12 7:19:19.564 PM digest-service[88]: digest-request: init request
8/7/12 7:19:19.566 PM digest-service[88]: digest-request: init return domain: MACBOOKPRO server: MALORIE-JANASEKS-MACBOOK-PRO
8/7/12 7:19:20.000 PM kernel[0]: [ffffff8027ac6800][BNBTrackpadDevice::init][75.15] init is complete
8/7/12 7:19:20.000 PM kernel[0]: [ffffff8027ac6800][BNBTrackpadDevice::handleStart][75.15] returning 1
8/7/12 7:19:20.000 PM kernel[0]: [ffffff8029184c00][AppleMultitouchHIDEventDriver::start] entered
8/7/12 7:19:20.000 PM kernel[0]: [ffffff8027b85c00][AppleMultitouchDevice::start] entered
8/7/12 7:19:22.048 PM mds[54]: (Normal) FMW: FMW 0 0
8/7/12 7:19:22.051 PM WindowServer[140]: Server is starting up
8/7/12 7:19:22.124 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
8/7/12 7:19:22.240 PM WindowServer[140]: Session 256 retained (2 references)
8/7/12 7:19:22.240 PM WindowServer[140]: Session 256 released (1 references)
8/7/12 7:19:22.290 PM WindowServer[140]: Session 256 retained (2 references)
8/7/12 7:19:22.335 PM WindowServer[140]: init_page_flip: page flip mode is on
8/7/12 7:19:23.311 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 7 seconds
8/7/12 7:19:23.311 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 7 seconds
8/7/12 7:19:23.591 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 6 seconds
8/7/12 7:19:24.343 PM WindowServer[140]: mux_initialize: Mode is dynamic
8/7/12 7:19:24.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
8/7/12 7:19:24.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
8/7/12 7:19:24.924 PM WindowServer[140]: GLCompositor enabled for tile size [256 x 256]
8/7/12 7:19:24.924 PM WindowServer[140]: CGXGLInitMipMap: mip map mode is on
8/7/12 7:19:24.976 PM WindowServer[140]: WSMachineUsesNewStyleMirroring: false
8/7/12 7:19:24.976 PM WindowServer[140]: Display 0x042728c0: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
8/7/12 7:19:24.977 PM WindowServer[140]: Display 0x1a48a351: GL mask 0x2; bounds (1440, 0)[1920 x 1080], 72 modes available
Active, on-line, enabled, Vendor 469, Model 23f1, S/N 5f11, Unit 1, Rotation 0
UUID 0x00000469000023f100005f1100000000
8/7/12 7:19:24.986 PM WindowServer[140]: Created shield window 0x7 for display 0x042728c0
8/7/12 7:19:24.992 PM WindowServer[140]: Created shield window 0x8 for display 0x1a48a351
8/7/12 7:19:25.201 PM WindowServer[140]: hw_mirror_device_if_possible: driver picks 0x1a48a351 as primary
8/7/12 7:19:25.217 PM WindowServer[140]: Display 0x1a48a351: GL mask 0x2; bounds (0, 0)[1440 x 900], 72 modes available
Hardware mirror of 0x42728c0; Main, Active, on-line, enabled, Vendor 469, Model 23f1, S/N 5f11, Unit 1, Rotation 0
UUID 0x00000469000023f100005f1100000000
8/7/12 7:19:25.217 PM WindowServer[140]: Display 0x042728c0: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Master in mirror set; on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
8/7/12 7:19:25.217 PM WindowServer[140]: CGXPerformInitialDisplayConfiguration
8/7/12 7:19:25.217 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; Vendor 0x469 Model 0x23f1 S/N 24337 Dimensions 20.51 x 11.54; online enabled, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
8/7/12 7:19:25.217 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; Alias(0, 0x5); Vendor 0x610 Model 0x9ca3 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
8/7/12 7:19:25.218 PM WindowServer[140]: CGXMuxBoot: Boot normal
8/7/12 7:19:26.000 PM kernel[0]: MacAuthEvent en1 Auth result for: 00:22:a4:25:0c:d1 MAC AUTH succeeded
8/7/12 7:19:26.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
8/7/12 7:19:26.000 PM kernel[0]: AirPort: Link Up on en1
8/7/12 7:19:26.000 PM kernel[0]: en1: BSSID changed to 00:22:a4:25:0c:d1
8/7/12 7:19:26.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
8/7/12 7:19:26.000 PM kernel[0]: AirPort: RSN handshake complete on en1
8/7/12 7:19:28.107 PM configd[19]: network changed: v4(en1+:192.168.1.70) DNS+ Proxy+ SMB
8/7/12 7:19:28.128 PM configd[19]: setting hostname to "tate-s-ipod"
8/7/12 7:19:28.271 PM UserEventAgent[11]: Captive: en1: Not probing '2WIRE999' (protected network)
8/7/12 7:19:28.277 PM configd[19]: network changed: v4(en1!:192.168.1.70) DNS Proxy SMB
8/7/12 7:19:29.032 PM airportd[154]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 7:19:29.379 PM ntpd[85]: proto: precision = 1.000 usec
8/7/12 7:19:30.016 PM digest-service[88]: digest-request: uid=0
8/7/12 7:19:30.016 PM digest-service[88]: digest-request: init request
8/7/12 7:19:30.018 PM digest-service[88]: digest-request: init return domain: MACBOOKPRO server: TATE-S-IPOD
8/7/12 7:19:30.236 PM UpdateSettingsTool[42]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/7/12 7:19:32.226 PM genatsdb[185]: ########## genatsdb Sandboxed. ##########
8/7/12 7:19:32.435 PM WindowServer[140]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003e6b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
8/7/12 7:19:32.516 PM WindowServer[140]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
8/7/12 7:19:32.516 PM WindowServer[140]: GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, accelerator 0x00003917, unit 2, caps QEX|QGL|MIPMAP, vram 288 MB
8/7/12 7:19:32.520 PM WindowServer[140]: GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
8/7/12 7:19:32.520 PM WindowServer[140]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/7/12 7:19:32.526 PM WindowServer[140]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/7/12 7:19:32.802 PM loginwindow[58]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/7/12 7:19:33.158 PM WindowServer[140]: Created shield window 0x9 for display 0x1a48a351
8/7/12 7:19:33.158 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.158 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.164 PM WindowServer[140]: Created shield window 0xa for display 0x042728c0
8/7/12 7:19:33.164 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.165 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.385 PM WindowServer[140]: Created shield window 0xb for display 0x1a48a351
8/7/12 7:19:33.385 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.385 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.386 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 7:19:33.392 PM WindowServer[140]: Created shield window 0xc for display 0x042728c0
8/7/12 7:19:33.393 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
8/7/12 7:19:33.393 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
8/7/12 7:19:33.393 PM WindowServer[140]: Display 0x042728c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
8/7/12 7:19:33.407 PM WindowServer[140]: Unable to open IOHIDSystem (e00002bd)
8/7/12 7:19:33.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
8/7/12 7:19:33.481 PM launchctl[195]: com.apple.findmymacmessenger: Already loaded
8/7/12 7:19:33.624 PM com.apple.SecurityServer[16]: Session 100005 created
8/7/12 7:19:34.287 PM BezelServices 235.55[58]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
8/7/12 7:19:34.340 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 6 seconds
8/7/12 7:19:34.342 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 6 seconds
8/7/12 7:19:34.430 PM airportd[154]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 7:19:34.597 PM com.apple.launchd[1]: (com.apple.smb.preferences) Throttling respawn: Will start in 6 seconds
8/7/12 7:19:35.143 PM hidd[63]: CGSShutdownServerConnections: Detaching application from window server
8/7/12 7:19:35.143 PM hidd[63]: CGSDisplayServerShutdown: Detaching display subsystem from window server
8/7/12 7:19:35.285 PM loginwindow[58]: Login Window Started Security Agent
8/7/12 7:19:35.930 PM UpdateSettingsTool[42]: [Warning] Bad response from daemon for setup info
8/7/12 7:19:35.980 PM SecurityAgent[210]: This is the first run
8/7/12 7:19:35.980 PM SecurityAgent[210]: MacBuddy was run = 0
8/7/12 7:19:40.606 PM digest-service[88]: digest-request: uid=0
8/7/12 7:19:40.606 PM digest-service[88]: digest-request: init request
8/7/12 7:19:40.607 PM digest-service[88]: digest-request: init return domain: MACBOOKPRO-3DD4 server: TATE-S-IPOD
8/7/12 7:19:45.121 PM coreaudiod[203]: 2012-08-07 07:19:45.121034 PM [AirPlay] Started browsing for _airplay._tcp.
8/7/12 7:19:45.122 PM coreaudiod[203]: 2012-08-07 07:19:45.121605 PM [AirPlay] Started browsing for _raop._tcp.
8/7/12 7:19:45.727 PM UserEventAgent[196]: cannot find useragent 1102
8/7/12 7:20:04.417 PM genatsdb[185]: *GENATSDB* FontObjects generated = 729
8/7/12 7:20:17.111 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[231]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:20:17.132 PM com.apple.launchd.peruser.501[225]: (com.apple.distnoted.xpc.agent[232]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:20:17.138 PM com.apple.launchd.peruser.501[225]: (com.apple.cfprefsd.xpc.agent[234]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:20:17.141 PM distnoted[232]: # distnote server agent absolute time: 130.071035547 civil time: Tue Aug 7 19:20:17 2012 pid: 232 uid: 501 root: no
8/7/12 7:20:18.157 PM com.apple.SecurityServer[16]: Session 100007 created
8/7/12 7:20:18.157 PM com.apple.SecurityServer[16]: Session 100008 created
8/7/12 7:20:42.852 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[237]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:21:01.000 PM kernel[0]: considerRebuildOfPrelinkedKernel com.apple.iokit.IOGraphicsFamily triggered rebuild
8/7/12 7:21:12.534 PM com.apple.kextcache[238]: Kernel file /mach_kernel does not contain requested arch: i386
8/7/12 7:21:57.603 PM com.apple.kextcache[238]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
8/7/12 7:22:10.361 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[241]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:22:34.673 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[253]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:22:55.243 PM com.apple.SecurityServer[16]: Session 100009 created
8/7/12 7:24:26.662 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[278]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:25:27.508 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[285]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:27:28.314 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[306]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:28:36.382 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[318]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:32:38.798 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[334]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:34:23.054 PM WindowServer[140]: Created shield window 0xf for display 0x1a48a351
8/7/12 7:34:23.059 PM WindowServer[140]: Created shield window 0x10 for display 0x042728c0
8/7/12 7:34:23.161 PM WindowServer[140]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
8/7/12 7:34:23.171 PM WindowServer[140]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
8/7/12 7:34:39.379 PM com.apple.launchd.peruser.501[225]: (com.apple.mdworker.bundles[338]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 7:35:24.000 PM kernel[0]: hibernate image path: /var/vm/sleepimage
8/7/12 7:35:24.000 PM kernel[0]: sizeof(IOHibernateImageHeader) == 512
8/7/12 7:35:24.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
8/7/12 7:35:24.000 PM kernel[0]: kern_open_file_for_direct_io(0) took 88 ms
8/7/12 7:35:24.000 PM kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 400000 ssd 0
8/7/12 7:35:24.000 PM kernel[0]: hibernate image major 1, minor 0, blocksize 512, pollers 4
8/7/12 7:35:24.000 PM kernel[0]: hibernate_alloc_pages flags 00000000, gobbling 0 pages
8/7/12 7:35:24.000 PM kernel[0]: hibernate_setup(0) took 0 ms
8/7/12 7:35:29.000 PM kernel[0]: hibernate_page_list_setall start 0xffffff808325c000, 0xffffff808327b000
8/7/12 7:35:29.000 PM kernel[0]: hibernate_page_list_setall time: 214 ms
8/7/12 7:35:29.000 PM kernel[0]: pages 584829, wire 181477, act 58256, inact 0, cleaned 0 spec 15, zf 1047, throt 0, could discard act 54144 inact 17641 purgeable 8394 spec 263855 cleaned 0
8/7/12 7:35:29.000 PM kernel[0]: hibernate_page_list_setall found pageCount 240795
8/7/12 7:35:29.000 PM kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
8/7/12 7:35:29.000 PM kernel[0]: IOHibernatePollerOpen(0)
8/7/12 7:35:29.000 PM kernel[0]: encryptStart 13230
8/7/12 7:35:29.000 PM kernel[0]: writing 239262 pages
8/7/12 7:35:29.000 PM kernel[0]: encryptEnd a76d800
8/7/12 7:35:29.000 PM kernel[0]: image1Size 0xe3ba800, encryptStart1 0x13230, End1 0xa76d800
8/7/12 7:35:29.000 PM kernel[0]: encryptStart e3ba800
8/7/12 7:35:29.000 PM kernel[0]: encryptEnd 142e4400
8/7/12 7:35:29.000 PM kernel[0]: PMStats: Hibernate write took 4574 ms
8/7/12 7:35:29.000 PM kernel[0]: all time: 4574 ms, comp bytes: 980324352 time: 779 ms 1199 Mb/s, crypt bytes: 275268048 time: 427 ms 614 Mb/s,
8/7/12 7:35:29.000 PM kernel[0]: image 338576384, uncompressed 980324352 (239337), compressed 331378416 (33%), sum1 31fae30e, sum2 b24f226a
8/7/12 7:35:29.000 PM kernel[0]: wired_pages_encrypted 132776, wired_pages_clear 47243, dirty_pages_encrypted 59318
8/7/12 7:35:29.000 PM kernel[0]: hibernate_write_image done(0)
8/7/12 7:35:29.000 PM kernel[0]: sleep
8/7/12 8:22:46.695 PM WindowServer[140]: handle_will_sleep_auth_and_shield_windows: no lock state data
8/7/12 8:22:46.697 PM WindowServer[140]: handle_will_sleep_auth_and_shield_windows: no lock state data
8/7/12 8:22:46.000 PM kernel[0]: Wake reason: EHC2
8/7/12 8:22:46.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
8/7/12 8:22:46.000 PM kernel[0]: Previous Sleep Cause: 5
8/7/12 8:22:46.000 PM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
8/7/12 8:22:46.000 PM kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
8/7/12 8:22:46.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
8/7/12 8:22:46.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
8/7/12 8:22:46.000 PM kernel[0]: en1: 802.11d country code set to 'X0'.
8/7/12 8:22:46.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
8/7/12 8:22:46.000 PM kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
8/7/12 8:22:46.000 PM kernel[0]: HID tickle 156 ms
8/7/12 8:22:47.685 PM hidd[63]: MultitouchHID: device bootloaded
8/7/12 8:22:49.822 PM configd[19]: network changed: v4(en1-:192.168.1.70) DNS- Proxy- SMB
8/7/12 8:22:49.823 PM configd[19]: setting hostname to "MALORIE-JANASEKs-MacBook-Pro.local"
8/7/12 8:22:49.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
8/7/12 8:22:49.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
8/7/12 8:22:51.000 PM kernel[0]: MacAuthEvent en1 Auth result for: 00:22:a4:25:0c:d1 MAC AUTH succeeded
8/7/12 8:22:51.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
8/7/12 8:22:51.000 PM kernel[0]: AirPort: Link Up on en1
8/7/12 8:22:51.000 PM kernel[0]: en1: BSSID changed to 00:22:a4:25:0c:d1
8/7/12 8:22:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
8/7/12 8:22:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
8/7/12 8:22:51.955 PM configd[19]: network changed: v4(en1+:192.168.1.70) DNS+ Proxy+ SMB
8/7/12 8:22:51.966 PM UserEventAgent[11]: Captive: en1: Not probing '2WIRE999' (protected network)
8/7/12 8:22:51.970 PM configd[19]: network changed: v4(en1!:192.168.1.70) DNS Proxy SMB
8/7/12 8:22:51.985 PM configd[19]: setting hostname to "tate-s-ipod"
8/7/12 8:22:52.391 PM airportd[346]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 8:22:52.421 PM airportd[346]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 8:22:52.445 PM airportd[346]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 8:23:06.672 PM WindowServer[140]: Received display connect changed for display 0x42728c0
8/7/12 8:23:06.673 PM WindowServer[140]: Received display connect changed for display 0x1a48a351
8/7/12 8:23:06.780 PM WindowServer[140]: Created shield window 0x11 for display 0x1a48a351
8/7/12 8:23:06.780 PM WindowServer[140]: handle_will_sleep_auth_and_shield_windows: no lock state data
8/7/12 8:23:07.333 PM WindowServer[140]: Display 0x1a48a351: GL mask 0x2; bounds (0, 0)[1920 x 1080], 72 modes available
Hardware mirror of 0x42728c0; Main, Active, on-line, enabled, OpenGL-accel, Vendor 469, Model 23f1, S/N 5f11, Unit 1, Rotation 0
UUID 0x00000469000023f100005f1100000000, ColorProfile { 2, "ASUS VH232H"}
8/7/12 8:23:07.334 PM WindowServer[140]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003e6b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
8/7/12 8:23:07.334 PM WindowServer[140]: Display 0x003f003c: GL mask 0x5; bounds (0, 0)[1 x 1], 1 modes available
Master in mirror set; off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c, ColorProfile { 3, "Color LCD"}
8/7/12 8:23:07.656 PM WindowServer[140]: Created shield window 0x12 for display 0x1a48a351
8/7/12 8:23:07.656 PM WindowServer[140]: Created shield window 0x13 for display 0x003f003c
8/7/12 8:23:07.657 PM WindowServer[140]: Display added
8/7/12 8:23:07.657 PM WindowServer[140]: Display removed
8/7/12 8:23:07.682 PM WindowServer[140]: Display 0x1a48a351: GL mask 0x2; bounds (0, 0)[1920 x 1080], 72 modes available
Main, Active, on-line, enabled, OpenGL-accel, Vendor 469, Model 23f1, S/N 5f11, Unit 1, Rotation 0
UUID 0x00000469000023f100005f1100000000, ColorProfile { 2, "ASUS VH232H"}
8/7/12 8:23:07.683 PM WindowServer[140]: GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003e6b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
8/7/12 8:23:07.683 PM WindowServer[140]: Display 0x003f003c: GL mask 0x5; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c, ColorProfile { 3, "Color LCD"}
8/7/12 8:23:08.782 PM WindowServer[140]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/7/12 8:23:08.925 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 8:23:08.979 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 8:23:09.657 PM WindowServer[140]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/7/12 8:23:09.691 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 8:23:09.708 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 8:23:14.978 PM ALSPlugin 235.55[63]: LuxDisplayBacklightManager::updateALSIdleTimer Failed to get current linear brightnes
8/7/12 8:23:45.219 PM SecurityAgent[210]: User info context values set for maloriejanasek
8/7/12 8:23:45.393 PM CVMServer[172]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/7/12 8:23:46.856 PM SecurityAgent[210]: Login Window login proceeding
8/7/12 8:23:47.491 PM CVMServer[172]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/7/12 8:23:47.506 PM loginwindow[58]: Login Window - Returned from Security Agent
8/7/12 8:23:47.565 PM CVMServer[172]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/7/12 8:23:47.636 PM loginwindow[58]: USER_PROCESS: 58 console
8/7/12 8:23:47.714 PM airportd[360]: _doAutoJoin: Already associated to “2WIRE999”. Bailing on auto-join.
8/7/12 8:23:47.784 PM com.apple.launchd.peruser.501[225]: (com.apple.launchctl.Aqua[361]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:47.867 PM com.apple.launchd.peruser.501[225]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/7/12 8:23:47.870 PM com.apple.launchd.peruser.501[225]: (0x7f89b3d004b0.anonymous.loginwindow[58]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:47.872 PM loginwindow[58]: Connection with distnoted server was invalidated
8/7/12 8:23:47.873 PM com.apple.launchd.peruser.501[225]: (com.apple.universalaccessd[362]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:47.876 PM com.apple.launchd.peruser.501[225]: (com.apple.ServiceManagement.LoginItems[363]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.046 PM com.apple.launchd.peruser.501[225]: (com.apple.tccd[365]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.350 PM WindowServer[140]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/7/12 8:23:48.367 PM com.apple.launchd.peruser.501[225]: (com.apple.talagent[369]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.367 PM com.apple.launchd.peruser.501[225]: (com.apple.Dock.agent[370]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.389 PM com.apple.launchd.peruser.501[225]: (com.apple.SystemUIServer.agent[371]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.475 PM WindowServer[140]: Display 0x1a48a351: MappedDisplay Unit 1; ColorProfile { 2, "ASUS VH232H"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/7/12 8:23:48.501 PM com.apple.launchd.peruser.501[225]: (com.apple.Finder[372]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.760 PM com.apple.launchd.peruser.501[225]: (com.apple.pboard[374]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:48.854 PM com.apple.launchd.peruser.501[225]: ([0x0-0x30030].activateSettings[375]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:50.667 PM com.apple.launchd.peruser.501[225]: (com.apple.fontd[381]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:51.234 PM com.apple.launchd.peruser.501[225]: (com.apple.NetworkBrowserAgent[384]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:51.329 PM NetworkBrowserAgent[384]: Starting NetworkBrowserAgent
8/7/12 8:23:52.192 PM com.apple.launchd.peruser.501[225]: (com.apple.FontWorker[385]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.196 PM com.apple.launchd.peruser.501[225]: (com.apple.cvmsCompAgent_x86_64[386]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.267 PM genatsdb[387]: ########## genatsdb Sandboxed. ##########
8/7/12 8:23:52.514 PM com.apple.launchd.peruser.501[225]: (com.apple.UserEventAgent-Aqua[390]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.515 PM com.apple.launchd.peruser.501[225]: (com.apple.SocialPushAgent[391]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.516 PM com.apple.launchd.peruser.501[225]: (com.apple.parentalcontrols.check[393]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.516 PM com.apple.launchd.peruser.501[225]: (com.apple.PCIESlotCheck[392]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.518 PM com.apple.launchd.peruser.501[225]: (com.apple.mdmclient.agent[396]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.518 PM com.apple.launchd.peruser.501[225]: (com.apple.notificationcenterui.agent[394]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.519 PM com.apple.launchd.peruser.501[225]: (com.apple.mrt.uiagent[395]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.519 PM com.apple.launchd.peruser.501[225]: (com.apple.isst[397]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.519 PM com.apple.launchd.peruser.501[225]: (com.apple.imagent[398]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.520 PM com.apple.launchd.peruser.501[225]: (com.apple.helpd[399]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.520 PM com.apple.launchd.peruser.501[225]: (com.apple.FTCleanup[400]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.520 PM com.apple.launchd.peruser.501[225]: (com.apple.coreservices.appleid.authentication[401]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.520 PM com.apple.launchd.peruser.501[225]: (com.apple.warmd_agent[388]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.520 PM com.apple.launchd.peruser.501[225]: (com.apple.CalendarAgent[402]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.521 PM com.apple.launchd.peruser.501[225]: (com.apple.assistantd[403]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.521 PM com.apple.launchd.peruser.501[225]: (com.apple.usernoted[389]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.521 PM com.apple.launchd.peruser.501[225]: (com.apple.apsctl[404]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.521 PM com.apple.launchd.peruser.501[225]: (com.apple.afpstat-qfa[405]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.522 PM com.apple.launchd.peruser.501[225]: (com.rim.BBLaunchAgent[406]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.523 PM com.apple.launchd.peruser.501[225]: (com.google.keystone.system.agent[407]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.524 PM com.apple.launchd.peruser.501[225]: (com.flipvideo.FlipShareAutoRun[408]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.525 PM com.apple.launchd.peruser.501[225]: (com.adobe.AAM.Startup-1.0[410]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.525 PM com.apple.launchd.peruser.501[225]: (com.adobe.CS5ServiceManager[409]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:52.991 PM com.apple.launchd.peruser.501[225]: (com.apple.afpstat-qfa[405]) Exited with code: 2
8/7/12 8:23:53.483 PM com.apple.launchd.peruser.501[225]: ([0x0-0x34034].com.flexibits.fantastical[414]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:53.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=407[GoogleSoftwareUp] clearing CS_VALID
8/7/12 8:23:54.029 PM com.apple.launchd.peruser.501[225]: (com.apple.accountsd[416]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:54.437 PM coreservicesd[37]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationCreation to notificationID=166
8/7/12 8:23:54.483 PM WindowServer[140]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
8/7/12 8:23:54.549 PM WindowServer[140]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.07 seconds (server forcibly re-enabled them after 1.00 seconds)
8/7/12 8:23:54.704 PM com.apple.launchd.peruser.501[225]: ([0x0-0x37037].com.getdropbox.dropbox[417]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:55.351 PM com.apple.launchd.peruser.501[225]: (com.apple.mrt.uiagent[395]) Exited with code: 255
8/7/12 8:23:56.113 PM com.apple.launchd.peruser.501[225]: (com.apple.java.InstallOnDemandAgent[419]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:56.151 PM com.apple.launchd.peruser.501[225]: (com.adobe.CS5ServiceManager[409]) Exited with code: 97
8/7/12 8:23:57.047 PM com.apple.launchd.peruser.501[225]: (com.apple.quicklook[422]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:23:57.524 PM com.apple.launchd.peruser.501[225]: (com.apple.CoreLocationAgent[423]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:24:01.217 PM blued[72]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
8/7/12 8:24:01.275 PM SystemUIServer[371]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/7/12 8:24:01.278 PM SystemUIServer[371]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/7/12 8:24:01.683 PM GoogleSoftwareUpdateDaemon[426]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
8/7/12 8:24:01.771 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
8/7/12 8:24:02.038 PM GoogleSoftwareUpdateDaemon[426]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
8/7/12 8:24:02.473 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x25e1a0
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x25e130 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2011-10-10 19:40:24
>
Using server: <KSOmahaServer:0x554200
engine=<KSDaemonUpdateEngine:0x1050b30>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-08-07 07:00:00 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2012-08-07 07:00:00 +0000;
LastActivePingDate = 2012-08-07 07:00:00 +0000;
LastActiveDate = 2012-08-08 00:23:58 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-08-07 07:00:01 +0000;
LastActiveDate = 2012-08-07 18:09:13 +0000;
LastActivePingDate = 2012-08-07 07:00:01 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.0_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
8/7/12 8:24:02.478 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x55a760
server=<KSOmahaServer:0x554200>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.0_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="302" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
8/7/12 8:24:04.563 PM com.apple.launchd.peruser.501[225]: (com.apple.pbs[434]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:24:05.170 PM com.apple.launchd.peruser.501[225]: (com.apple.storeagent[438]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:24:06.890 PM com.apple.launchd.peruser.501[225]: ([0x0-0x3f03f].com.apple.AppleSpell[440]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:24:09.994 PM WindowServer[140]: CGXDisableUpdate: UI updates were forcibly disabled by application "Fantastical" for over 1.00 seconds. Server has re-enabled them.
8/7/12 8:24:12.749 PM com.apple.launchd.peruser.501[225]: (com.apple.FontWorker[449]) Could not setup Mach task special port 8: (os/kern) invalid argument
8/7/12 8:24:13.401 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x25fcc0
server=<KSOmahaServer:0x554200>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="62653"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
8/7/12 8:24:15.128 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
8/7/12 8:24:15.355 PM GoogleSoftwareUpdateDaemon[426]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
8/7/12 8:24:15.356 PM GoogleSoftwareUpdateDaemon[426]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
8/7/12 8:24:15.358 PM GoogleSoftwareUpdateDaemon[426]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
8/7/12 8:24:15.361 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
8/7/12 8:24:15.491 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
8/7/12 8:24:15.494 PM GoogleSoftwareUpdateDaemon[426]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
8/7/12 8:24:16.731 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x12507f0
productID=com.google.talkplugin
version=3.3.3.8675
xc=<KSPathExistenceChecker:0x124cf80 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2011-10-10 19:40:24
>,
<KSTicket:0x124cf40
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x1250670 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2011-10-10 19:40:24
>
Using server: <KSOmahaServer:0x10557d0
engine=<KSDaemonUpdateEngine:0x1050b30>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-08-07 07:00:00 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2012-08-07 07:00:00 +0000;
LastActivePingDate = 2012-08-07 07:00:00 +0000;
LastActiveDate = 2012-08-08 00:23:58 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-08-07 07:00:01 +0000;
LastActiveDate = 2012-08-07 18:09:13 +0000;
LastActivePingDate = 2012-08-07 07:00:01 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.0_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
8/7/12 8:24:16.733 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1055d70
server=<KSOmahaServer:0x10557d0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.0_i486"></o:os>
<o:app appid="com.google.talkplugin" version="3.3.3.8675" lang="en-us" installage="302" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="302" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
8/7/12 8:24:17.831 PM UserEventAgent[390]: cannot find fw daemon port 1102
8/7/12 8:24:19.098 PM GoogleSoftwareUpdateDaemon[426]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x565610
server=<KSOmahaServer:0x10557d0>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-
I have used the service to upload many pictures to my account, however on my latest upload (5 photos, one of them was a virtual copy, could this be the cause of the problem perhaps?), it ended with the following dialog box:
"Can't update this collection.
An internal error has occurred: assertation failed!"
All the pictures uploaded though. I tried to upload another one to see what would happen. It did upload as well, but it also ended with the same error coming up. It's quite annoying, can someone help me please?I worked with Gokul from Adobe support, and we eventually stumbled into the solution.
The system clock was wrong!
Based on something Friedl says on the blog for his Flickr plugin, the Flickr authentication APIs will fail if the system clock is wrong. His plugin helpfully points out that the clock is wrong when you install it. It also reports the error that he gets from the Flickr APIs: HTTP 401 (not authorized). Unfortunately, Lightroom's builtin Flickr publishing plugin doesn't report any error, and it just fails silently.
In my case, Windows appeared to be displaying the correct time, but the time zone was incorrect, and my system time was actually 3 hours ahead. I reset the clock and timezone and restarted Lightroom. Now, the builtin Flickr publish plugin is working again. -
Not showing recent calls, and privacy settings
Im so confused. All of a sudden, my iphone 4 is glitching. Here are the problems
1)its not showing my recent or missed calls at all, unless a voice mail is left
2) in the privacy settings, its not allowing me to allow apps access to my photos
3)my photo apps (including instagram) wont open
I tried doing a hard reset on the phone, and that didnt work. I also tried removing the apps and restoring them in itunes and that didnt work either.
HELP!!Hello emilydoanne,
Oh No! I'm extremely sorry to learn that you're having issues with your wireless device. I understand the importance of having consistent access to your device at all times. I want to make sure we work on a resolution right away. I do appreciate you completing a hard reset on the device. When this process was completed, how did you do this? Have you plugged your device into iTunes to process a full factory restore? Have you taken your device into a local Apple or VZW store for a hands on evaluation? Please keep us posted, thanks!
MatthewS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
Why is Lightroom 5.4 so slow in Publish services and Book module?
I've been using Lightroom 5 for a few months now. I'm using the latest version (5.4) and have been experiencing extremely slow performance in two main areas:
1) When in the Library module and I select (or scroll down to) the Publish services on the left it pauses for 10+ seconds before displaying the valid services. Changing between different services also takes quite a while. I now have the services minimised unless I need them.
2) When in the Book module and I try and change a page layout the first time I select the drop down the cursor changes to a spinning circle for a while. Sometimes it comes up with the dialog saying Lightroom has experienced problems and I can either close it or wait. It usually recovers without any input from me. However, the first time I select the drop down it will close without me being about to select anything. I then have to press it again and wait for the layouts to load before I can scroll through the list. This occurs on every page. It takes probably 10-20 seconds to be able to select a new page layout. Applying the layout is very quick.
I have upgraded my PC from a 2.6GHz Core 2 Duo with 4 GB DDR2 RAM to an I5-4670 with 16 GB DDR3 RAM and not seen much improvement in either area. In both configurations I used an SSD for the application and catalog. The photos are stored on a NAS but this has not shown any performance issues in browsing/editing photos. A review of Task Manager's CPU and RAM loading during these operations does not indicate the CPU or RAM is maxed out. I've never seen the RAM go above ~7 GB used and CPU loading (average across all 4 cores) is usually less than 50%.
Generally the upgraded PC is showing a significant improvement in Lightroom's performance but these two areas are still painfully slow.
Is anyone else experiencing these issues or have any ideas on what I can do to try and improve its performance??
Thanks,
BrettHi Brett,
I got the same issue and I am very frustrated about it.
Its the same thing I experienced in Lightroom 4 and its still not fixed. I cant use the book module because of that. So BLURB is not getting my money. :-(
I am waiting for that fix since more than a year, but Adobe says its a Problem which appears only for a small group of users.
HA HA just do a Google search!!!
System:
Lenovo W520
Win 7 64Bit
i7-2760 @ 2.4 GHz
20 GB Ram
1st HDD SSD 256GB --> Catalog
2nd HDD HGST 1.5TB -->Pictures
Nvidia Quadro 2000m -
Best security and privacy settings for Yosemite
I have recently upgraded to Yosemite and started thinking about security and privacy. So I had a look around hoping to find an article or something telling me what I should do to various settings to make sure that everything is okay. I did find some information but bits of it were beyond my understanding and I did want to do anything in case I messed anything up. Like I saw about FileVault but then went I went to use it I was asked if I wanted to use iCloud with it or not, but I didn't know which option to go for so I left it. Obviously I have a password and Firewall turned on but just wondering if there was anything else I can do to protect everythin. I also read that Apple gets a lot of information from web searches and such. I really do t like the thought of thar. Can I do anything. I'm sorry if this seems really basic but I would appreciate any advice anyone can give or point me in the direction of.
Privacy
Use built-in Private Browsing and DuckDuckGo search engine.
Protection
http://support.apple.com/kb/PH14365
http://www.thesafemac.com/mmg/
Best. -
Editing community profile info and privacy settings
I would like to change the first/last name on my community profile (the name that shows up here). I made the mistake of not entering a coded name. Gives scammers TMI! Community profile updates allow changing or hiding everything but that information.
To edit your profile, click the down-arrow tab next to your name at the top-right of your screen. In the menu, you'll see "Edit profile and privacy" From this screen, you will be able to edit your information.
Please note that you are in full control of how your information appears. On the "Edit Profile" screen, you'll see a tab for "Privacy Settings". Click to the privacy settings tab, and from there, you can choose who is able to see your name and other info. You can choose to set these fields as visible to only yourself, if you so choose. -
Hard Drive Publishing Services and Smart Collections
Hi there,
Total newbie here, so apologies if these are obvious. I haven't had much luck with the various searches I've tried.
Is it possible to publish a smart collection? When I add a rule to my "published smart folder", I only get entries when I specify searches against plain old vanilla collections versus the smart variety. I certainly can use all the same rules from my collections smart folder, but maintaining those rules in one place would be much less error prone, I believe
Is it possible to specify that a smart collection be exported to a sub-folder of the Hard Drive Publish Service? Essentially what I have are smart collections, divided into months. I want each month to export into their own month folders. Each folder then appears as a different album for iPhone/iPad/AppleTV. The only solution I'm seeing right now is to create separate Hard Drive Publish Services, one for each month.
Thanks for any help on these!
-Kevin1. No. A smart collection (or a smart published folder, which is essentially the same) cannot search in another smart collection. You can only use the new smart published folder and trash your old smart collection to keep things simpler. A smart published folder is essentially a smart collection that resides in the Publish Services panel.
2. Yes, each published folder or smart published folder, as well as a published folder sets, create their own folder on drive. Published folders sets create a level of hierarchy when exported. -
Flickr Publish Service - Inability to Stop "Retreiving Comments for Photostream" Process
I upload a lot of stuff to Flickr and every time my selected photos complete uploading a process kicks off "Retreiving Comments for Photostream". This never seems to do anything and after a time I get this annoying popup which says: "Can't download comments for this collection. Could not contact the Flickr web service. Please check your internet connection." First of all, I do not want to download comments, but I have no user control over preventing it, other than standing by to cancel the process once it starts. Secondly, it appears a change at the Flickr end has broken this functionality anyway.
How do I convey this info to the Adobe staff responsible for the code writing for Lightroom so they can sort this out? I could find no other way apart from this forum to raise this issue.No, you are not alone. It has been doing that to me for a week or so. May have been going on longer, but I had not posted in a few days.
Annoying since canceling the task by clicking on the X to the right of the progress bar makes it 'go away' but the pop-up still appears a few seconds later.
Maybe you are looking for
-
Playbook volume not mouting ???
update my OS to most recent on playbook 2.1.0.1088 update my desktop software to 7.1.0.33 can't get playbook to connect to desktop manager, the drive wont mount ... please help.
-
Booting up-no screen-keyboard works
Hi. My first post. My computer has had booting problems for a few days. Battery is fine. Twice, we could hear the ding and the keyboard worked (sound buttons, etc.) but no screen. The start button light does not go on, and the white light on the fron
-
When I visit my site, and click on a photo or do the slide show, the photos popping up are not the most current version. If I click on the door picture, and enlarged cat picture opens! What is going on? And, the last few times I have published, the c
-
Re: nsapi problem with WL 4.5.2 no sp with iPlanet 4.0
We are noticing the same problem with WL5.1, esp. I can replicate this by reducing the number of executeThreads within WebLogic to a very low number (say 5). It seems to me that there is a problem with the WebL
-
Am o problema cu iphone-ul meu (3g cu vers. 4.2.1)
am o problema cu iphone-ul meu (3g cu vers. 4.2.1)nu pot dechide setarile wireless,in dreptul lui wi'fi aarand mesajul:nu exista Wi-Fi.nu stiu ce sa fac.am incercat de toate