Flickr set permissions doesn't work

In Aperture, when creating a new Flickr set while uploading, my selected permissions will be set on the uploaded photos correctly.
Selecting an existing set, and changing permissions on that, has no effect on flickr photos. I can select a set and change its name, and that has immediate effect on flickr, but changing permissions from Aperture has no effect at all.
Since there is an option to change permissions on a set from Aperture, I assume this is a bug?
Regards,
MartinF

After the CREATE DATABASE, you must also run catalog.sql and catproc.sql from $ORACLE_HOME/rdbms/admin.
Hemant

Similar Messages

Flickr set up does not work

When I try to upload a photo to Flickr this message keeps appearing:
"Do you want to set up iphoto to publish to flickr?"
I have followed the set up process a dozen of times, but iPhoto keeps asking the same question. In Flickr I can see the permission to use iPhoto uploader, but iPhoto doesn't seem to recognize it.
I have searched all over the internet and cannot find a solution.

Exact same problem here.
Environment:
- iPhoto '09, running on Leopard 10.5.8.
- I did not have a Flickr account yet.
Steps to reproduce:
1) Clicked the "Flickr" button in iPhoto 09, received popup "Do you want to set up iPhoto to publish to Flickr".
2) Clicked "Set Up", got redirected to Yahoo Flickr in Safari.
2) Created my Yahoo account as prompted.
3) Clicked "Flickr" button in iPhoto 09 again. Got same popup, clicked "Set Up" again.
4) In the newly opened Safari window, entered my Yahoo credentials. When asked, confirmed that I wanted "iPhoto Uploader" to have full access to my Flickr albums.
5) Verified that iPhoto Uploader had indeed been added to the access list in Flickr using the link provided on the Flickr webpage.
Actual result:
* Popup disappears from iPhoto, but immediately re-appears asking for same "Set Up" procedure.
I followed this endless loop about 5 times, each time entering my Yahoo credentials, each time verifying that iPhoto Uploader had been granted access to Flickr.
Conclusion:
* iPhoto 09 has high-severity bug, Flickr functionality does not work at all.

Zfs set userquota doesn't work on upgraded datasets?

Greetings all,
I put all the latest patches on a Solaris 10 system with zfs to and upgraded the zpool to version 15 and zfs to version 4 so I could use user-based quotas. When I try to set a userquota on an existing dataset, it takes the command but doesn't set up the quota. If I create a new dataset, then I can assign quotas to it. Does the userquota not work on existing datasets that have been upgraded? Here are the commands that illustrate the problem:
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
data 50.7G 145G 50.7G /data
# zpool upgrade
This system is currently running ZFS pool version 15.
All pools are formatted using this version.
# zfs upgrade
This system is currently running ZFS filesystem version 4.
All filesystems are formatted with the current version.
# zfs set userquota@finleyc=50G data
# zfs get userquota@finleyc data
NAME PROPERTY VALUE SOURCE
data userquota@finleyc - -
# zfs create data/test
# zfs set userquota@finleyc=50G data/test
# zfs get userquota@finleyc data/test
NAME PROPERTY VALUE SOURCE
data/test userquota@finleyc 50G local
# zfs destroy data/test
Any ideas? Thanks!
Tim

Can you repeat the test and, before erasing the dataset, send the output for
# zfs userspace data/testCheers
Andy

Email set up doesn't work

Can anyone please help me?!
I had my email account set up on my iPhone and IPad (iPad only a few days old) was working fine on both til last night.
I read a few forums that suggested deleting from both devices, reset devices then load back on one device as sometime email accounts can only be accessed from one device at a time.
Done all that, now I can't get my emails to set up at all!
Anyone perhaps know how to rectify this?
Many thanks in advance!
Louise

Sure.
I set up my account as normal in settings.
Everything looks ok.
I then go into my mail account and there is literally nothing there and it's a work account so I have got loads of emails in there....
I had it all set up on both devices but it just seemed to stop receiving emails and when I refreshed it, it said the date and time was last night sometime on my iPad, but was still receiving them on my iPhone ok??
Does that make sense?
Thanks

.setLocation(x,y) right after .set(image) doesn't works

hello
i have pretty simple code there :
dispjai.set(image)
dispjai.setLocation(200,200);after running this code, the DisplayJAI is displayed at location (0,0).
if i call setLocation(200,200) later, it then works.
seems like i can't change the location right after changing the image...
any idea ? thanks

The DisplayJAI widget is in some container. That container has a LayoutManager which is thwarting your efforts to manually position the widget. If you want to manually position or size components, then you should set the layout of the container to null.
It appears the solution you came up with was to translate the image and make it appear as though the widget has moved, when in actuality the image just got larger. And a larger image = more memory.

[SOLVED} Setting Proxy doesn't work

Hi everyone,
I'm trying to go through a proxy with my ArchLinux, and in order to do this I run this script :
#!/bin/bash
# set utc proxy
export http_proxy=http://proxyweb.utc.fr:3128
export https_proxy=$http_proxy
export ftp_proxy=$http_proxy
export rsync_proxy=$http_proxy
export no_proxy="localhost,127.0.0.1,greta,localaddress,.localdomain.com"
But when I want, for example, to launch a "sudo pacman -S something", I can't go through the proxy. Do you have any idea why this isn't working ?
Thanks in advance.
Last edited by nugetchar (2014-09-22 13:17:55)

nugetchar wrote:But when I want, for example, to launch a "sudo pacman -S something", I can't go through the proxy. Do you have any idea why this isn't working ?
sudo changes your environment, and maintains a whitelist of what it allows to "leak" through to the new user session. You can use the -E flag to preserve the environment, or you can specifically whitelist variables in sudoers with the env_keep directive.

Iweb sete ( flash doesn't work in firefox & chrome )

Hello people
I have flash cs4 installed on my computer(w7) and I'm using iweb to build a website for my test. I have problems getting flash to work with Firefox and Chrome, but with Internet Explorer and safari, the flash work fine. this is the URL to te site www.patricktest.info
Thanks in advance to anyone that helps me.
Patrick

Hi Roddy
thanks for your response.
I'm using iweb to build my site and this is the code I use to add flash on my page.
and also I'm using godaddy to host my site and my swf file have been upload into my hosting account.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase=" http://fpdownload.adobe.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0, 0" width="200" height="200" align="middle"> <param name="movie" value="http://www.patricktest.info/flash/pub 02.swf"> <param name="allowScriptAccess" value="always"> <embed type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer" width="200" height="200" align="middle" src="http://www.patricktest.info/flash/pub 02.swf" allowScriptAccess="always"></embed></object>

New user account...can't log in...!!! set password doesn't work

ok. i post this again because i have yet to get an answer after many months.
Created new user account. I am the administrator. When changing to the new account i am prompted for password. Password is rejected EVERY TIME. how do i enable my computer to read the new account?
System 10.4.4
Desperately yours,
kent

I am getting the same problem!!!
I'm on a G5 iMac 2nd Gen., and if I make a new user account, then log out of the admin account and try to log into the just created user... the password does not work!! I am 1,000,000% positive the password I am entering is correct.
I would delete the just created user, then make another new one with some of the information changed, maybe try making the user an admin (which i shouldn't have to do obviously) and it still will not work!! Looks like I just have to reinstall OS X. There is no other way around it. I've even tried resetting the password through the admin user account in the Users preference pane, and through the reset password utility on the install disk.

MSI GTX 750 ti + HP Pavilion + Legacy BIOS setting = still doesn't work

I recently decided to upgrade the video card in my ~3 year old HP Pavilion (h8 1237-c). It's been running a GeForce GTX 460, but the thing is really loud and obviously several generations behind current video hardware.
So I purchased an EVGA GTX 750, but quickly ran into problems. Apparently, HP hasn't released a BIOS upgrade for this Pavilion for a long time (I'm on the latest - 7.12, dated 10/12/2011), and newer cards won't work with it. There were a lot of posts in multiple forums (Toms Hardware, HP forums, etc.) about this particular MSI 750 card and the "Legacy BIOS" switch it offered being a solution for this problem.
So I returned the EVGA card (which resulted in a Newegg restocking fee - ouch) and ordered the MSI card.
I'm getting the *exact same problem* (regardless of which position, 1 or 2, that the switch on the MSI card is using) - computer starts to boot up, won't get past the HP "splash screen" where I can hit ESC to enter setup.
Am I about to return my second video card, and just live with my old 560? Or can someone suggest something else I can try?

The problem is with the component support of your HP machine. The problem is not GOP or legacy vios but the need for a ME8 firmware including bios to run a GTX7xx on a socket 1155 based system. If HP can't supply such you will never be able to run a GeForce GTX7xx or later in your system.

Adding a user to file permissions doesn't work in Lion.

Using "Get Info", after unlocking, when I add a user, nothing happens. Sometimes, repeatedly unlocking, adding the user, then re-locking yields success. Very annoying! Is this a known bug? Is there a fix?

Because your drop shadow is 27mm to the right of the object. Zoom out and you'll see it. Change the x offset to .27cm instead of 2.7cm in the drop shadow dialog box.

Page Setup dialog doesn't work

Hi everyone
My generic Page Setup dialog box as e.g. used for Word etc. doesn't work:
In the Page Setup dialog, the "Setting" menu doesn't work at all, i.e. I can see the dropdown but it doesn't accept my changes (it's fixed on "Page Settings"). All other menus or choices are accepted but then the "OK" button doesn't work; it just flickers briefly and then goes back to blue. The "Cancel" button makes all contents of the dialog box disappear except for the frame and the buttons. Either way force quitting and relaunching the application is the only way to continue working in the application.
What could be the issue here?
A few specs on my hardware, printer and system:
- MacBook Pro (brand new)
- OS X 10.5.5
- Printers: hp LaserJet 4200 (main printer), iP5200R, OKI B6200, Lexmark E321. All these printers I used without problems with my old PowerBook G4.
The problem occurs with all applications using this generic Page Setup dialog, such as Word, Grab etc. In Excel e.g. all these functions work (it uses a different kind of dialog box for the page setup).
The problem could possibly have started to occur when the Lexmark printer could not be installed automatically so I assigned it another Lexmark driver, which seemed to work. But I'm not sure whether those two problems occurred at the same time.
What I tried already:
- uninstall and reinstall all printers in the Print & Fax part of the System Preferences. I uninstalled all printers and (without restart) reinstalled the hp printer only. The problem was still there, even upon restart.
- reinstall Word (first I thought it was a Word problem)
Any ideas??
Message was edited by: thuns72
Message was edited by: thuns72

Hi,
Try to increase the size of repeating frame, as I follow this strategy in my report find the outermost repeating frame and increase its size to whole page than increase the size of your required repeating frame if you want to break page on this group, no need to set max record and page break properties(as I saw page break property never works).
Thanks.
Khawar

Mail.app DisableInlineAttachmentViewing doesn't work

Hi Community,
in Mavericks 10.9.2 with Mail.app 7.2 the defaults write command to enable the setting DisableInlineAttachmentViewing doesn't work for received emails. In sent emails this command works as expected. Is there another possibility to disable inline attachment viewing for received emails?
Thx & Bye Tom

Well, that info seems to be stored in the main mail.plist, I suspect it's corrupted.
<key>NewMessageFromAddress</key>
<string>sri_paco <sri_paco@f*****.net></string>

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

I am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

i am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

Flickr set permissions doesn't work

Similar Messages

Maybe you are looking for