Flickr sharing - public access

The Flickr sharing/upload feature in my Mountain Lion has a default that always load my pictures to a private album.
Is there a solution to set public access as my new default?
Thanks for solution.

http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap121/administration/guide/WAP121_321_AG_en.pdf

Similar Messages

Public Access Folder Question

Hello,
In BI Publisher we set up a public access folder called "Guest". I understand by doing this any user can access the folder and the reports in this folder. We do not want the users to access the reports that are in this folder because, the reason why we set up the public access folder was to have just reports in this folder that are being called from a form. *(Which I was told this was the only way to call reports from forms).* Otherwise, we do not want the users to be able to access this folder and to run these reports when they want. The public access folder called "Guest" is under Shared Folders. Since it is under Shared Folders any user can see the folder and have access to it automatically. Can the Administrator put the public access folder under My Folders so the users can't see it or access it but reports can still be called from a form? Or is there another way to set up reports in BI Publisher that can be called from a form?
Any Help would be greatly appreciated.
Susie

What is the reference to use of the guest folder? I think it is based more upon who is logging in, not a specific folder.
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v21.pdf

Public Access

who has access to content i post on the cloud? i understand if i send the URL to someone they can click in, but can my content be accessed by third parties surfing?

Hi , i have found out how it could be achieved from administration guide:
Enabling the Ability to Grant Public Access
Before you can allow public access to a particular folder, you must ensure that the
ability to grant public access has been enabled at the Site level.
To ensure that the ability to grant public access is enabled for the Site:
1. Connect to Oracle Content DB as a user with the Content Administrator and User
Administrator roles, such as orcladmin.
2. Change to Administration Mode.
3. Access the Sharing Properties for the root Site folder.
4. Ensure that the option Allow public access to be granted has been enabled.
Allowing Public Access to Oracle Content DB Folders
To grant public access to a particular folder:
1. Connect to Oracle Content DB as a user with the Content Administrator and User
Administrator roles, such as orcladmin.
2. Change to Administration Mode.
3. Access the Sharing Properties for the folder to which you want to grant public
access.
4. Add the special group Public to this folder. If you cannot add this group, make
sure that you enabled the ability to grant public access at the Site level, as
described in the previous procedure.

Setting up access points for public access

Okay, here's the situation. I have a PowerMac G4/1.25GHz dual processor running Server X 10.3.9 with four Mac clients (a small law office). Up until recently, everyone had also been running (client) 10.3.9, but I started upgrading some of them to 10.4 (currently 10.4.5). When I did this, they started running into problems with Word sometimes giving a "network or file permission error" when attempting to save documents to the server. After weeks of posting questions to Word support and trying everything in the book that I could think of, I found Apple recently posted what appears to be the answer to this (article 302979, "Microsoft Office applications fail to save to a server volume." The problem? I have all four users logging into the same account on the server, and when one of them logs out, it zaps everything in a Microsoft-created temp folder on the server, including temp files created by open documents created by other clients. Sheesh.
I had everyone set to use the same account because they have no need of document security -- everyone should be able to get into everyone else's files on the server, period. So, because of this snafu, I've created separate accounts for each of the users. My problem now is that, if user "X" creates a file or folder on the server, user "Y" cannot modify it because it is created as read-only. Strangely, if someone modifies an existing file, it doesn't change the user rights at all -- not sure why.
I'll admit to being a bit of a novice with Server X but am familiar with parent/child folder permissions -- I think I've got everything set right, but I must obviously be missing something. Here's what I've got setup, and what I've tried. If anyone can point out how I've got this setup improperly, I really need to get this fixed... thanks.
I have a single sharepoint ("workfiles"). I used the "public" folder as an example, and set the owner to "root" and the group to "staff". Further, I set the owner, group and everyone privileges to "read & write". I've also tried setting the group to "admin". All the individual user accounts I've set are also setup as admin users. I've tried setting each users's primary group as "staff (20)" or "admin (80)". I've copied all these privileges to all enclosed items, which does reset everything to public access, but as soon as someone creates a new folder or file, that folder/file becomes private to that user (it shows up with the creator's username as "owner" (r&w), group as "admin (read-only), and others as "read-only" as well.
PS: If upgrading the server to Server X 10.4 would help, I'm sure I can arrange that.

In our law firm, the server (10.4.4), we have set access to read/write access so staff can open client files/folders, edit then and close, etc. That seems to be working okay. Before the tech worked on permissions, if someone created a letter another staff member could open it, but it was read-only.
The problem we are having is that if a file that is clicked on stationery pad and we want to edit it, it will not allow us to. For example, if we need to edit our letterhead that normally comes up as an untitled document, if I unclick the stationery pad box, it unclicks, but it still comes up as an untitled document. I even tried to unclick a stationery pad on a document that I created before the server upgrade and it wouldn't let me.
If I create a brand new document and put it on stationery pad, it comes up untitled as it should. If another user on another desktop wants to make changes, they unclick the stationery pad box, but when they open it, it comes up untitled and in checking get info, the stationery pad is selected.
The tech set it up as follows:
Share Points and All tabs:
General tab: box to share this item and its contents is clicked
Access tab: owner, group and everyone have read/write privileges
If select dial at bottom to propagate permissions, all boxes are checked, except for access control list, which is shaded.
I cannot drag/add anything to the control list and the pencil and the minus sign is shaded
Protocol tab: Both boxes, share item using AFP and Allow AFP guest users are clicked. But for better security in reading the article, this should be unchecked.
Also under the protocol tab: the inherit permission from parent radio dial is clicked, not the use standard POSIX behavior.
What are we missing?
Thanks, Cheryl

Trying to compare FCP with Media 100 for a Public Access studio

Hi all,
I am new here. I do most of the review of products for our Public Access studio. We have a couple of existing Media 100 systems and we are considering adding or upgrading our NLE capabilities. Our studio manager had a chance to look at FCP being used at our high school and she came back with a number of impressions that I wonder about and would like to vet with people who know more about FCP. So, any comments would be helpful.
The high school media person demo’d FCP for her and let her play with it a bit. After looking at it herself, she says she would definitely say Media 100 is easier to understand/use, especially if you've never used non-linear editing before. That is fairly typical of the people doing Public Access production in our town.
However, it looks to her like there are a lot of tools that come with FCP that Media 100 either doesn't have or are not easily found in it. For example, she feels FCP’s set up looks more complicated and confusing compared to Media 100’s, but in FCP you can have up to 99 video lines in a program, where with Media 100 we're just going back and forth between the a and b video lines. Plus you can have up to 99 Audio tracks on FCP as well, where our max at the moment is 8. Now as to when you would need 99 video or audio tracks, she is not sure, but it is definitely a capability that we don't have in Media 100.
Titling looked easier to her on Media 100. With FCP there were a lot of filters involved and hoops to jump through, plus she couldn't do a word with each letter a different color, for example, unless she did each letter on a different track.
The media person warned her that FCP is really large. Apparently the program itself takes up like 35 GB of space on the hard drive, and a typical 30 min. project comes in at over 100 GB! She couldn't believe it, but she was assured it’s true. Even with our longest programs, like like a School Committee meeting thqat went 3 1/2 hours, it would came in at a max of 30 GB on the Media 100. She got the impression this big difference was so because Final Cut renders everything you do, including rendering any edits you make on your footage as new files, and stores it all in a huge folder. She thinks with Media 100, you import the footage and use it as is - the only things it will render are screen freezes, transitions, and color effects. Is that sort of comparison correct (and fair), or is something being missed?
She says in her experience that something like iMovie is the most basic as far as what you can do, then Ulead would be a step above that- the editing is basically the same, but you have a few more options. Media 100 would be next as far as ease of use and understanding of the program. FCP seemed a little confusing even to her. Comments or insights?
G4 Mac OS X (10.4.7)

Welcome to the family, maybe.
I switched from M100 about four years ago, I was never so glad to give that company the boot. A direct comparison just isn't possible but I'll try to answer some questions. There is a Media 100 forum on creativecow.net.
she says she would definitely say Media 100 is easier to understand/use, especially if you've never used non-linear editing before.< </div>
Yes, absolutely, M100 has always had an elegant and refined interface. However, the paradigm in FCP is not opaque. It's far more interesting, deeper, more complex. So, yes, it's a bit tougher to grasp. But don't sell your students/users short. They'll get it.
99 tracks is marketing BS. The serious work is done with nesting. How many public access pieces need more than 5 or 10 video tracks?
Titling in FCP depends on third party filters like Boris or tools like LiveType and Motion. The basic titling tools in FCP are lame and difficult to use, in my opinion, compared to the elegant titler in M100 (as long as you don't launch Graffiti).
The installation includes tens of gigs of animation, movie and music loop resources that you don't need to load. The suite includes Motion, LiveType, Soundtrack Pro, DVD Studio Pro and FCP.
If you're shooting DV, a 3-1/2 hour show is, umm, well, you look it up, DV is DV. But if you're capturing 3 hours from each of three cameras, that's a lot of DV.
Rendering depends on lots of things. M100's native codec handles lots of realtime stuff that FCP can't unless you've got a huge Macintosh. Previewing is not a big deal at lower rez in FCP, you get used to it. .
FCP is really scary. You can look at thousands of "I'm in way over my head, HELP!" posts here. But all those folks find they slip right into the Apple paradigm, the weirdly new workflow and start exploring the wide new world of serious editing that FCP opens up. You'll hate it for a few months because it's so dramatically different from M100. You'll love it, though.
If you want to continue the thread, give the rest of the disaffected former M100 users a few days to post their comments. There are many of us here. Then maybe start a new thread, one question at a time.
bogiesan

ITunes U Public Access Issue -- iTunes Fails to Launch

Hello,
I've been notified of an issue with our iTunes U public access link. When users go to our itunes.clemson.edu page and try to access our public content via the Log In No ID Required link, iTunes does not launch.
This occurs when the user is off campus and not on the Clemson network (using IE). If the user VPN's into our network, things work as expected. This should not be a problem since the public content is available to anyone who wishes to view the Clemson iTunes U page.
We also have the same issue when users are off campus and try to gain access to our private content by authenticating with their campus userid and password. When they are on the Clemson network, everything is accessible, but when they are not, iTunes seems to be unavailable.
You should try this...
- go to itunes.clemson.edu
- try to access the public content via the "Log In No ID Required" link and reply with what happens here. (The link is an image link on the right side of the page just under the Clemson on iTunes U banner)
Nicholas
mcelve2 at clemson dot edu

Your users may be running into an issue specific to their browser. You might want to read these threads:
http://discussions.apple.com/thread.jspa?messageID=2404380
http://discussions.apple.com/thread.jspa?messageID=2927738
Unfortunately there's behavior in some browsers that doesn't always launch iTunes successfully based on previous dialog messages the user may have dismissed or unknowingly choose the wrong option.

I have to relaunch itunes for apple tv home sharing to access library

why is that i have to relaunch itunes every now and then for apple tv home sharing to access movie library
itunes version 12.1
ATV 3
Mac mini 2014

Problem solved – While looking elsewhere on the Internet, I ran across an article where a guy in Russia found that his security code for the credit card entered on his iTunes account was missing.
After checking, I found my security code was missing as well. After I reentered my credit card security code, I was able to log on to the iTunes Store and also able to turn on Home Sharing.
I HOPE The Apple iTunes accounts were not hacked into. That could be a reason for the security codes beinging erased by Apple.

I am opening a public access/community TV station soon. We are thinking of using Final Cut X for our staff

I am opening a public access/community TV station very soon. We are thinking of using Final Cut X for our staff and community producers. I am curious if there are any special discounts for multiple purchases of computers, but also for Final Cut X software? Does anyone reading have any experience from a public access TV perspective?

Hi SCaryPictures,
I run a PEG station, where I have used FCP7, AvidExpressPro, Adobe CS6/CC, and FCPX - I am approaching 2 years with my FCPX experience. I'd be happy to engage with you in a private email thread about my experience (I value my access to the people on this forum, and I don't want the Apple staffers to take offence.) Good luck founding your station!
Eric D - [email protected]
CoralVision (City of Coralville, IA)

Some users cannot "see" broadcast Public Access SSID but can all others...

I've had 4 users in the last 3 days who've reported not being able to see our broadcast "public access" wifi SSID. Numerous users (even in same area, attached to same AP) can see it - however some cannot. The do see all of the other broadcast SSIDs, just not the public. The public is open and broadcast with security enabled. Does anyone know if this is a client issue - possible with a recent AV or MS security update? ("protecting" clients from unsecured networks by not displaying them?)

If you notice that at a given time some users can and other can't see the ssid, it almost points to the client side. Compare drivers from the two clients and see if the driver versions are the same or old.

SAP systems for public access with OSS ID

Hi, experts,
I heard that there is a community in SDN which allow users to access SAP systems (such as CRM, XI/PI, etc.) to test and try things.
(1) Is that true ? What is the URL ?
If not, is there any site for public access to SAP systems with or w/o fees ?
(2) Is there Test Drive for XI/PI ? Could not locate it under downloads.
Thanks.
Hans

Hi Hans,
As far as I know there is no such site with public OSS ID and free XI test drive.
But you will get plenty of material from SDN.
-Pinkle

Concurrent users unable to open a shared Microsoft Access MDB database

I have a share on a Cisco NSS2000, the NSS is in Workgroup mode (Firmware 1.13).
Every user have read/write rights on this share.
When I try to open an access MDB database from this share it happens that only a single user at time can open the database.
The second user that try to open the database get a "Cannot lock file" error message.
So, when a user has the Access DB opened, no-one other can open (or connect to) the same DB.
It's impossible to open the DB using the access IDE ("Cannot lock file" error message).
It's impossible to make multiple connection to the DB using OleDB ("Cannot lock file" error message).
I've tried give full access to the mdb file.
I've tried give full access to the mdb folder.
I've even tried to give full access to the temporary LDB file.
I always get the same error message.
Is there a workaround?
Thanks, Max

I've finally been able to update the firmware to the latest 1.16.
Now everything works fine, problem solved! :)
Thanks,
Max
catung wrote:Max,Please update your firmware to the latest posted version, 1.16.Thanks-carl--Carl TungSBTG - PE, Storage
From: IsiSviluppo <[email protected]>
Reply-To: "[email protected]"
<[email protected]>
Date: Wed, 07 Apr 2010 00:07:20 -0600
To: Carl Tung <[email protected]>
Subject: Small Business Network Storage New message: "Concurrent users
unable to open a shared Microsoft Access MDB database" YbIMb-16E-b7l
catung,
A new message was posted in the thread "Concurrent users unable to open a
shared Microsoft Access MDB database":
https://www.myciscocommunity.com/message/42739#42739
Author : IsiSviluppo
Profile : https://www.myciscocommunity.com/people/IsiSviluppo
Message:

Can File Sharing be accessed on an external network?

ive enabled file share on my Mac Pro so that i can access it on my macbook pro. these two are on my time capsule network.
in the settings, for the macbook pro it says read and write, and for Everyone it says read only.
my question is: for Everyone, is this only people on my network or can people outside my network access my computer files too?

No, other people on the internet don't have access to your machine because Everyone is set to Read. Only people you give access to your Mac via sharing have access.
Everyone is really the Unix Posix 'others' which is users or processes that neither own the file nor are in same group as the file. In the normal sense of the word, a user must have a login to the machine to have access to anything. There are many users on your Mac that are not human. They are all the processes that actually do most of the stuff that goes on in the background. If you deny them access, your Mac will stop working.

Use of public access modifier in main method

I want to know what is the significance of public access modifier with main (String args[]) method. Like generally we write
public static void main(String args[])
But if we write
private static void main(String args[])
OR
protected static void main(String args[])
then also its working properly.............
then what is the use of public keyword..........................
Regards
Ajay Pratap Singh

then what is the use of public keyword..........................Convention, I believe. And I think newer versions of the JVM require it.
P.S. Relax a bit on the punctuation overuse. Many folks around here find that a bit irritating, and you probably don't intend to send that kind of a message. Cheers!

11gR2 Verification of shared storage accessibility

Friends,
I do not understand how is this possible. I am trying to apply 11.2.0.2.5 psu on a 2-node cluster running on RHEL 5.5 vms. Followed ORACLE-BASE examples when installed this laptop RAC.
I am not using any ACFS and none of GI and DB homes are shared. But, on node 2, cluvfy THINKS database home is shared.
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ hostname
rac1
[oracle@rac1 trace]$ echo $ORACLE_HOSTNAME
rac1
[oracle@rac1 trace]$
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is shared
Shared storage check was successful on nodes "rac2,rac1"
Verification of shared storage accessibility was successful.
NODE_STATUS::rac2:SUCC
NODE_STATUS::rac1:SUCC
OVERALL_STATUS::SUCC
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2/ -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2/" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac2 trace]$ hostname
rac2
[oracle@rac2 trace]$ echo $ORACLE_HOSTNAME
rac2
[oracle@rac2 trace]$
I can not determine any reasons and do not know how to fix.
Any help?
Thank you.

Hi,
CLUFVY COMP SSA checks if the used storage/location is shared.
If you do "cluvfy comp ssa -t software" cluvfy checks if your software home is shared.
It tells you it is not. Hence the checks fails (which is correct, because you said DB Home is not shared).
So where is the problem?
CLUVFY COMP SSA only makes sense to check the sharedness. If it is not shared, then there is no sense in testing for it.
Regards
Sebastian

Exchange 2010 Sp2 - Does not audit Shared calender access

I have Exchange 2010 sp2 , I have enabled mailbox audit on few mailbox , as well as MSExchange IS logs for logon event to expert.(event ID 1016),
I am trying to get folderbind events , from shared calender access , like Non-owner mailbox event or anything that I can run audit get the detail if non-owner accessed the calender or mailbox folder etc..
I found changes are logged like create , delete or any changes but not folderbind
i have following on to few mailboxes.
AuditEnabled : True
AuditLogAgeLimit : 90.00:00:00
AuditAdmin : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
AuditDelegate : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
AuditOwner : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, Create}
Can some one please help me to find what is missing to get folderbind audit events when any non-owner access anything like shared calender etc..
Thank you

Hi ANdy,
Yes we have the followed the same commands as mentioned in both the article and the PPT as well. But i got the errors as mentioned in my thread above.
Databases were not getting mounted, even when i tried the resume command still it failed.
regards
abubakar
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.
Ok, because that is the part I wasnt clear about. I assume that the servers in the DR site are not set for automatic activation, so in order for them to mount, you would have to clear that block.
When you tried to move the databases to the DR site, you got the same error message as you got when you ran the restore-databaseavailibilitygroup command?
So, is everything back to normal? Did you run test-replicationhealth before you failed over?
Also, anything of use in the cluster logs? “cluster log /g”.
I assume the MAPI bindings and NICS are set correctly since this worked before.
Twitter!:

Flickr sharing - public access

Similar Messages

Maybe you are looking for