Flight mode not totally disabling
Lumia 800
English
firmware:1750.0805.8773.12220
OS: 7.10.8773
HW: 112.1402.2.3
This is a strange problem and seems intermittent.
I place my phone in Flight Mode everynight and charge it on my night-stand. Most mornings I take it out of Flight Mode and the mails etc. from overnight start to arrive... As expected.
Sometimes; however, the phone is NOT actually in Flight mode, even though the airplane icon is displayed AND the Flight mode 'switch' is shown as active. This happened, again, last night and at 04:00 mails arrived and the phone was 'pinging' on the night-stand. I checked the phone and it was indicating Flight Mode (icon and 'switch').
I have searched and cannot find anyone reporting this.
Aside from the inconvenience it potentially leaves me breaching airline regulations if I belive the phone to be in Flight mode on an aeroplane and it actually isn't.
Any ideas?
hi leehelpz,
Just to check, are you able to turn on/off Airplane Mode via Charms Bar / PC Settings as indicated by the guide below?
Airplane Mode - Turn On or Off in Windows 8
If Airplane Mode works when toggling it from other settings (except for the F7 key) then it's likely that the Energy Management driver is not synching correctly with the OS.
Things that you can try:
1. Follow this guide on how to create a System Restore point (for backup purposes) then uninstall the Lenovo Energy Management (reboot if necessary) and observe if you can now toggle Airplane Mode via the F7 key.
2. If same problem, consider installing the Lenovo Energy Management v1.0.0.24 and observe.
Alternatively, you can follow this guide on how to create an Airplane Mode Shortcuts..
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
I like the new iOS 7 for iphone... But i think it's not a good idea to allow switch the iphone on flight mode when it is locked.. What happens if your iphone is stolen or lost? You couldn't be able to locate it using find my iphone... Can i remove this from the bottom menu?
And have your phone set to require a passcode before it can be accessed.
-
My phone wont leave flight mode
For the past two months i've not been able to disable the flight mode of my phone (lumia 520). I'd not been able to put to on my mobile network no calls no texts etc.
Have you checked you are up to date with the latest firmware update and the latest system app updates from the Store. Also check that your microSIM card us cut correctly and that you have proper number activated.
-
ASK : Does Flight Mode in WP drain LUMIA's Battery...
Hello Everyone, Is there anyone else had same issue like mine? Two days ago, my LUMIA 625 turned into battery saver mode. So I charged it immediatelly. I charged my LUMIA in Flight Mode. After 100% charged, I pluged out the charger but forgot to turned off the filght mode. In stand by condition, I put my LUMIA on my desk and then go to sleep. When I wake up , I found my battery in 30%. Does the flight mode can drain the battery ( for about 10 hours ) ? Normally , my LUMIA can take up to 1 day for be 30% battery life from 100%. Some helps will be so helpful.
Thank you and sorry for my English...
Solved!
Go to Solution.Hi, AYMAR89. Welcome to the Nokia Support Discussions!
Flight mode will not drain your phone's battery. In fact, it should prolong the battery life of the phone as it deactivates the phone's connection such as Wi-Fi & cellular data. Try checking if there's an app running on the phone's background by going to Settings > Applications > Background task. You may disable some apps and monitor your phone if it will make any changes. For some battery tips, check this link: Battery: making it last.
Let us know how it will go. -
Bluetooth but no GSM in Flight mode ?
Hi,
Is there a way on E61 to get Bluetooth working but not GSM when you use it in plane/flight mode ? or in an other mode ?
Thanks
VinceBluetooth also transmit in radio wave spectrum that might interfer in airplane communication, so it's disable in flight mode!
Message Edited by android on 16-Feb-2008 08:06 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR.. -
guys!!!! i forgot my itouch password and now it's totally disabled... what else i can do?? i mean my itouch5 is never been sync to any computer... pls help me to get rid of this passcode!! and do all my data and apps will be gone or will it be there?? pls
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
5ghz Wifi doesn't work in Flight-Mode with Wifi tu...
** Lumia 820 **
Turn Flight-Mode [ON]. This disables all wireless connections, including phone network, bluetooth, and wifi AS EXPECTED.
Now manually turn Wifi [ON]. 5ghz networks will not show as available. 2.4ghz networks both show, and connect normally.
Turn Flight-Mode [OFF]. 5ghz networks now show and work normally. This is non-sensicle.
Can anyone confirm that their phone contains the same bug.
OS Version: 8.0.9903.10
Firmware Rev Num: 1232.2109.1242.1001you would need to ring nokia themselves or visit a nokia store to report this as an issue. Whilst this forum is the nokia forum, its for the community to help each other.. Nokia reps rarely discuss issues on here. They may make announcements from time to time.
Having said that both the moderators and some nokia staff do visit the pages to keep an eye on things such as these issues, even though they don't comment on them directly.
I would be keen to see if this issue is related to the firmware or the hardware. Obviously if its hardware related then maybe Nokia can look at it for future models, if it firmware related then Microsoft may be able to fix it in some future release. -
My daughter totally disabled her iPod touch 3rd generation by attempting to guess the password I set. How can I restore the device if iTunes is bombing out my computer?
Not knowing what "iTunes is bombing out my computer" means all I can suggest is:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Jabber for Window, phone mode, how to disable "use my computer for calls"
We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, PerryHi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
Instant messaging and presence with other Cisco Jabber clients
Desk phone control
Voicemail
Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor -
Wi-fi won't work in Flight mode
Hi everyone - was wondering if anyone here could help me. I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging (ping, whatsapp etc.). However, when I put my phone in flight mode, even though it's connected to wifi, as evidenced by the symbol at the top of the screen, it fails to connect to any web page or receive my email and 'whatsapp' even goes on to say that I don;t have a valid internet connection.
I'm not sure what it could be...help would be much appreciated!I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging
Just put in a SIM card you can buy in the destination country and put it in iPhone. Calls are then cheap. -
Changed resolution by mistake and have lost everything "mode not supported"
Guys,
This one is totally my own fault but ive managed to crash my Apple TV and was wondering if someone may be able to assit me with a solution?
Apple TV was working fine on my samsung HD TV and i was playing about with the settings.
I belive i was in "resolution" at the time and the setting was 'auto'.
For no reason other than my own stupdity, i changed the resolution to 780p or something like that and the screen went immediately blank.
All i get now is "mode not supported".
Ive held down + and menu and done the scan and it wont retrueve my previous settings.
Ive also tried - and menu and still nothing.
Why didnt i just leave it alone.
Any ideas folks on how i can get this back working and restore to auto?
Panicking.....
Simon.Have you tried restarting it.
-
Is it possilbe to totally disable the use of Microsoft Accounts in Windows 8.x ?
The existence and need of "Microsoft Accounts" in Windows 8.x causes many issues for corporate IT management.
1) To access Windows 8.x Mail App, Calendar App, etc, OneDrive, Skype, to upgrade from Windows 8.0 to Windows 8.1, and the Windows Store requires a Microsoft Account.
2) Not all users have or will want to have their own personal Microsoft Account
3) It is possible for the corporate IT department to create Microsoft Accounts for each of the company Users, but it is an extra burden and difficult to manage these accounts.
Potentially the simplest solution is to be able to totally disable the use of Microsoft Accounts in Windows 8.x, is this possible?Hello,
You have the choice of uninstalling the metro apps ou use the GPO to block the use of Microsoft account.
Please see the followings links:
Uninstall metro apps:
http://www.deploiementwindows.com/supprimer-les-applications-dans-windows-8-1/
GPO: Block Microsoft accounts
http://technet.microsoft.com/en-us/library/jj966262%28v=ws.10%29.aspx
http://4sysops.com/archives/control-windows-store-access-with-group-policy/
regards,
- Yannick Plavonil -
Links in PDF from View Mode Not Working
Ok, bear with me as I'm not totally familiar with Robohelp.
I have a PDF file, lets call it (PDF1). Inside PDF1 is a flowchart with a link to another PDF (PDF2) file.
When I open PDF1 outside of RoboHelp, the link to PDF2 works.
When I open PDF1 from the view mode (sunglasses), the link to PDF2 doesn't work. It doesn't do anything at all. I click on the link and nothing happens.
I have ensured that the link within PDF1 is correct and pointing to the right file, and like I said, it works when viewed external of Robohelp.
Does anyone know how to fix this or what the problem could be?
Thanks,
DanWelcome to our community
I'm not sure I fully comprehend the issue. You are previewing. This will impose some limitations and really is only there to approximate the end user experience.
You say that if you open things outside of RoboHelp the links work fine. And this is really how the end user will be using things, no? So if it works fine in this mode I'm not understanding why there is an issue.
Out of curiosity, why PDF? You are hopefully aware that one might supply PDF only for the purposes of printing, right? Otherwise, if your end user will be expecting to click links or whatever, you should be outputting a help format. (CHM, WebHelp, FlashHelp, AIR Help, etc)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Please, kindly roll out an update to solve the permanent flight mode problem affecting wp8.1 Lumia update. My phone has remained useless since I updated to Lumia cyan. Permanent flight mode rendered my beautiful adorable Lumia 520 useless. Urgent software update or revision to address this problem should be priority for Microsoft and Nokia
Hmmmm... what do you mean by 'permanent flight mode'? Can you give us some more details?
I'm not sure this is an endemic problem with the 520, since I haven't seen a lot of other complaints about this.
/drt -
VWIC is showing as "WIC module not supported/disabled in this slot"
Hello All,
please help me on this asap!!
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
PVDM 0 0x00200000
Onboard devices &
buffer pools 0x0228F000
TOTAL: 0x0268F000
Rounded IOMEM up to: 40Mb.
Using 7 percent iomem. [40Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Mar-10 02:13 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FGL162722DK
2 Gigabit Ethernet interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
Press RETURN to get started!
*Mar 1 00:00:04.931: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9
*Mar 1 00:00:05.019: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = uck9 and License = uck9
*Jan 23 07:37:07.403: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Jan 23 07:37:15.119: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/0 has an unknown id 0x6EF
*Jan 23 07:37:18.679: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Jan 23 07:37:21.063: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 23 07:37:23.083: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Jan 23 07:37:23.755: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Mar-10 02:13 by prod_rel_team
*Jan 23 07:37:23.759: %SNMP-5-COLDSTART: SNMP agent on host Hewitt_Noida is undergoing a cold start
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 3 in slot 0, changed state to up
*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 2 in slot 0, changed state to up
Hewitt_Noida>
Hewitt_Noida>
Hewitt_Noida>
Hewitt_Noida>en
Hewitt_Noida#
Hewitt_Noida#
Hewitt_Noida#sh diag
Slot 0:
C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:00:56 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC1624697D
Hardware Revision : 1.0
Part Number : 73-11834-08
Top Assy. Part Number : 800-30795-06
Board Revision : A0
Deviation Number : 123694
Fab Version : 03
Product (FRU) Number : CISCO2901/K9
Version Identifier : V06
CLEI Code : CMMJA00ARA
Processor type : C1
Chassis Serial Number : FGL162722DK
Chassis MAC Address : d48c.b51a.b668
MAC Address block size : 72
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 32 34 36 39 37 44 40
0x10: 06 17 41 01 00 82 49 2E 3A 08 C0 46 03 20 00 78
0x20: 4B 06 42 41 30 88 00 01 E3 2E 02 03 CB 8C 43 49
0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 36 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 41 30 30 41 52
0x50: 41 09 C1 C2 8B 46 47 4C 31 36 32 37 32 32 44 4B
0x60: C3 06 D4 8C B5 1A B6 68 43 00 48 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00
0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93
0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0
0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42
0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20
0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21
0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
PVDM Slot 0:
128-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
Hardware Revision : 1.0
Part Number : 73-11810-03
Board Revision : C0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC1602145Q
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM3-128
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 DC 41 01 00 82 49 2E 22 03 42 43 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 30 32
0x20: 31 34 35 51 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8F 50 56 44 4D 33 2D 31 32 38 20 20 20 20 20 20
0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 1.0
Top Assy. Part Number : 800-34658-01
Part Number : 73-13420-01
Board Revision : B0
Deviation Number : 124402
Fab Version : 05
PCB Serial Number : FOC16100L9C
Version Identifier : V01
Product (FRU) Number : VWIC3-2MFT-T1/E1
CLEI Code : COUIA7NCAA
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 EF 41 01 00 C0 46 03 20 00 87 62 01
0x10: 82 49 34 6C 01 42 42 30 88 00 01 E5 F2 02 05 C1
0x20: 8B 46 4F 43 31 36 31 30 30 4C 39 43 89 56 30 31
0x30: 20 CB 90 56 57 49 43 33 2D 32 4D 46 54 2D 54 31
0x40: 2F 45 31 C6 8A 43 4F 55 49 41 37 4E 43 41 41 03
0x50: 00 81 00 00 00 00 04 00 D9 03 40 C1 CB FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hewitt_Noida#Hi Akshay,
As per
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5855/data_sheet_c36-609138.html
VWIC3-1MFT-T1/E1 is supported since 15.1(1)T1 and later.
Make sure you have this minimum IOS.
HTH
Manish
Maybe you are looking for
-
How to pass HTML radio group value to an SQL query
I need to display a radio group in Printer Friendly Mode so that when the value in the radio group changes the page is submitted and the report is updated to the new value. I can't use a standard APEX radio group item as it renders in disabled mode w
-
hi i am beginner to oo abap. can anyone send me material regarding this subject. thanks in advance.
-
Hello, I hope someone can help me to solve this. I have three computers on a wireless network at home since July, without changes to the configuration. I'm using the WRT54G with WEP 64-bit encryption, and since earlier none of the computers can acces
-
Hi! I have problem with transaction iView in ITS, When I click the execute botton, I get "End of Session - Thank you for working with Internet Transaction Server" text. What's wrong? Why is not displayed the transaction? Other transactions incl. Leav
-
when i click on the airport icon on the menu bar a window drops down with a list eg bell101,bell924,and a bunch of others most have locks beside them, mine has a check mark before it but no lock after it,how do i lock mine down,i put in a 26 letter p