Flight_search view's UI element are not visible

Hi Experts,
UI Elements in the view Flight_search of component FITP_FLIGHT is not visible. when i click the layout of flight_search view it shows an message Export puffer not sufficient.preview deactivated. -> Note 965337
Any body could tell why this error is occured and how to rectify.
Edited by: Ramanan Panchabakesan on Sep 7, 2008 10:18 AM
Edited by: Ramanan Panchabakesan on Sep 7, 2008 12:04 PM

hi,
i am facing the same problem, when i click on view layout, it is not visible, and same message is coming to me that export puffer not sufficient, preview deactivated, note -> 965337.
Yogesh N

Similar Messages

In Business Rule child elements of Unbounded element are not visible.

Hi All,
Jdev version 11.1.1.7.0
I am facing one issue in Business Rule...
Scenario: I am creating Approval Service (BPEL) with Human Work flow and Bunises Rule.
I am assingning participant in HW by using Rule based(Connecting HW and BR).
Problem here is:
Shema has "unbounded" element.
<element name="ExpenseItem" maxOccurs="unbounded">
 <complexType>
 <sequence>
 <element name="ItemID" type="string"/>
 <element name="ItemName" type="string"/>
 <element name="ItemPrpjectID" type="string"/>
 <element name="ItemStatus" type="string"/>
 </sequence>
 </complexType>
 </element>
Whenever I create Busines rules to configure rules.
While configuring rules child elements of ExpenseItem are not visible. But those are neccesary to configure rules.
If you can help to me resolve would help.
Is it a bedault behaviour of BR? If so how can i acheive this?
Thanks,
Santosh

Solution found:
Click on RuleSet which you have created.
Expand Rule inside it.
Enable Advanced mode and Tree mode and click OK.
Select Root as Task and click on insert pattren and create pattren which is based on unbounded element (here its meant as fact)
Once you create pattren , will be able access elements under unbounded element for Business rule configuration.

BPM worklist app views are not visible in IPM task viewer

Hi,
we upgraded our system from 11.1.1.3.0 to
weblogic 10.3.5.0
SOA 11.1.1.5.0 with BPEL processes
ECM with IPM and UCM 11.1.1.5.0
after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
Thanks a lot in advance for any help
Edited by: 914063 on Jun 20, 2012 12:56 PM
Edited by: 914063 on Jun 20, 2012 12:57 PM

Hi Renuka,
There are basically two ways to create an ADF UI for a BPM Task:
1. Generate it from the task
2. Create a ADF Taskflow based on Human Workflow Task
Since I tell this by heart, I might be slightly wrong in the terms.
You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
Regards,
Martien

Custom work centers are not visible in the production tenant UI after solution is deployed

Hi Experts,
We have deployed the solution into the production tenant. The solution is deployed successfully. But the custom business option(BAC) element which we have created is not part of proejct scoping.
We have created a new change project in production and added the custom business option to the project.
Under this custom business option we have fine tuning activity which is having all the custom configurable code lists.
All these configurable code list are not visible as views. these are already assigned to WCF of one of our custom BO under asssinged objects.
These configurable code lists are displaying like below.
Because of this i am not able to close this fine tuning activity and i am not able merge the change project into Main project.
Once after merging the change project into main project, I came to know the all the custom work centers will be visible. I am correct here?
Can anybody know how to resolve this issue. Please let us know..!
Thanks,
Mani

Hi Mani,
this issue sometimes occurs. Please create an incident as soon as possible. Sometimes the BCSets / BCViews need to be regenerated in the backend. Support can correct this. Mention that you did this using the SAP Cloud Applications Studio.
In general please ask such question here: SAP Cloud Applications Studio
Cheers,
Jens

WBS tabs are not visible

I cannot see the tabs on my WBS. They have all disappeared. How can I make them visible? Only the dates tab is visible. All other tabs are not visible i.e Basic Data any idea why these are not visible for this project profile?
Edited by: Esi Ojior on Sep 1, 2011 3:06 PM

Check your configuration for "Define Layout of WBS Element Detail Screens" .
In this work step you define your own view of the detail screens. In the standard system every detail screen is on its own tab page.
With your own layout you can position several detail screens on one tab page and only show the tab pages, you need. You define each tab page individually and assign it a profile to
Edited by: psconsultant on Sep 1, 2011 9:38 AM

Text boxes are not visible

Hello. A page in my InDesign document appears to be broken. Text boxes are not visible, they can only mark if I choose command + a. Then I can copy the object and paste into another document in which they appear. You can not delete the page when the crash program. What could be wrong?

Re text boxes not visible try: View > Screen Mode > Normal.
It's not a good idea to copy and paste, use Place: File > Place.
Re your crashing, maybe you should reset your Preferences.
Derek

The date update from TFS online are not visible on Project pro

Hi everyone,
I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh. The update are not visible on project pro.
I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
Someone to help me??
Thanks for advance.
rexcs

Hi rexcs，
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

My firefox toolbars are not visible when I open firefox

All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
== This happened ==
Every time Firefox opened
== when I logged on one day about 2 weeks ago ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Printers are not visible in Print management

Installed print server feature in Windows server 2012 .We have added few printers in server, but these printers are not visible in printers section of Print management console.Even the default Microsoft XPS writer is not showing up.
Restarted Spooler service and reinstalled print management console.Server DNS record looks good too.
Able to view the printers in "Device and printers" .They are not visible only in print management console.
Thanks

Hi Daemon_Joker,
Please check if some necessary updates need to be installed. Please run
sfc /scannow command to scan all protected system files.
Meanwhile, please use
Get-Printer PowerShell cmdlet retrieves a list of printers installed on the computer. Did all printers display correctly?
In addition, please open Print Management, click Printer Servers, expand
your printer server, then right click Printers and select “Add Printer…”. Please check if you will be able to find printers via this wizard.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

User changes in tab strip ui element are not recorded in context change log

Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.

I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

I have just rented two movies and after download they are not visible anywhere in iTunes for me to watch.

I have just rented two movies and after download they are not visible anywhere for me to view. Usually in the iTunes menu there is an option call 'rentals' where rented movies sit until they expire, this is no longer visible. The movie files are listed in the finder under music/movies.... With the rest of my iTunes data, but they will not play in iTunes from there and I can't add them to my library for watching.
The only thing I am currently doing differently is that I have just subscribed to iTunes Match; would this affect my rentals?

Hi Cmcb,
Under your Library list, you should see "Movies". Click on that, and you will see a screen with several tabs at the top - Rentals, Unwatched, Movies, Genres, Home Videos, etc.
As Hackintosh indicated above, click on the Rentals tab, and your movies will be displayed there. Doulbe click on one to start playing it.
If you do not have your sidebar showing, go up to View at the top, and click on Show Sidebar. Then you will see your Library lists on the sidebar, which will include Movies.
Cheers,
GB

Many "click here" buttons are not visible

Many sites that have the "click here" button or symbol are not visible. I discovered this when moving my mouse to a location the "mouse hand" appeared indicating this was a button to click for a specific purpose. I downloaded the most recent version of Firefox a few days ago, but the problem of hidden buttons remains. This issue of not being able to see click-able buttons started about 6 weeks ago. Have changed themes, views, color schemes, etc. to no avail.
Any known solutions ?
thanx
inspector43

Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong

Image Library select/deselect ticks are not visible

Hi,
We are using Sharepoint 2013 (version
15.0.4569.1000). We have select/deselect ticks at list views but in image library list view, they are not visible. When List view page loaded there is a script error as below:
"Uncaught ReferenceError: InitImglibView is not defined".
I can't find the reason of this error. Can you help please?
Deniz Er

Thanks for the reply. Yes, i mean it. But i change the style as "Basic Table" from "Modify View" options. Screenshot is below
When i change the style from "Default" to "Basic Table", ticks are getting lost.
Deniz Er

Flight_search view's UI element are not visible

Similar Messages

Maybe you are looking for