Flip camera inputs fine, exports freeze

Flip Camera files input fine to iMovie HD 6, and they play fine. Trouble is, the exports freeze a few minutes into the movie.

I hope this info will help you ,
a weak ago i needed to cut with multicam 2 camera footage format AVCHD , each footage was 1 HOUR Long (1080@50i).
when both footage was on my raid 0, multicam didnt run smooth.
i plug to my computer addtional external hard disk (eSATA) and paste one of the camera to it.
the multicam was running much more smoother , meanning (i just think so ) when each camera is on seperated phiysical HD ,multicam can run faster.
notice that avchd format is quiet complex for any NLE compare to XDCAM or HDV .

Similar Messages

HT201401 iPhone 4S rear camera black screen but front facing camera perfectly fine and freezing updated to iOS 7.0.4

iPhone 4S brought couple of years ago, no apple warranty or AppleCare and since updating to iOS 7.0.4 there has been trouble with the rear facing camera, i dont want to go to apple store because i know that they will be like "You have to pay £200" and for me that is alot of money, now i didnt know if anyone else has the same issue as i know alot of other people are, and apple however isnt listening and needs to fix this immediately or they will lose customers.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Purchased used 4th g it has a lot of glitches sound is not working at all, shutting it off it automaticlly turns back on in 1 min, camera works but camcorder doesn't, all game apps work fine, did freeze when on app store but reset and it seemed to work.

my ipod touch 4th g is running ios 6.0.1 but is very glitchy. there is no sound and if I plug in earphones it freezes up. camera does work but freezes when i try to use Camcorder. App store was acting up but after reseting it multiple times it is working again. When I turn it off with the slidder it reboots after one minute. It is also hard to put into dfu mode and take back out holding consecutive buttons doesn't work....Was stuck in recovery mode for quite awhile till I used a program to kick it out. I did find youtube vidio that showed how to restore audio by deleating a file but of course this takes a little work and don't know if it would work with this ios. Was just wondering what I can try now. Would realy like sound. not so worried about camcorder. Did check settings and no apps are blocked.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Flip Camera files in FCP. Which format should I use?

hi Everyone!
I own a flip camera which gives me mp4 files 1280x720.
I does not seem to work fine with FCP.
I would like to convert them. What is the best format to use in FCP if I want to keep the 1280x720 format without to much quality loss?
Thank you very much.

Yes. I have the file on my hardrive.
Again the format is as follows.
Mpeg 4, 1280*720, 30 mbps.
I have the free software Mpeg streamclip to convert them in any format I want.
As I am a newbie I do not know which one to choose.
I just want to stick to 1280*720 and work as smoothly as possible in FCP without to much quality loss.

How do I get the built in microphone to work on my IMac? Camera works fine, but I can't record voice.

How do I get the built-in microphone to work on my IMac? Camera works fine, but I can't record sound.

I always assummed that the mic was part of iSight (intertwined?). The mic is situated right next to iSight. It would seem to me the solutions would be the same some what.
Regarding the OP, I also suspect his/her problem is hardware. It's rather unusual for the internal mic to not work yet the iSight does.

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

Batch-input for exporting cost calculation to a local file (ecc 6.0)

Hi,
we had a batch-input to export some data in a local file (excel format) in SAP 4.5B.
We recorded transaction CK11 for a material number, we got Itemization screen and then we recorded menu' option "List . Export . Local file / Spreadsheet). If the batch-input ran in foreground it would produce required outputs (some excel files).
Now we are migrating from 4.5B version to Ecc6.0; we recorded same transaction (both ck11 and ck11n, to be more ), but at execution time the window for local file saving never is displayed and B.I. stops with error.
One difference is that now data are collected into a container, instead that in a write list ...

Hi again,
the data i look for is a result of calculation of different tables so for every single product, it is calculated. In standart CO reports, there is no such report that give me that detail.
Finally i managed to call print OK code, but it was in the foreground processing mode, i cannot run it on backround processing..
I know i misuse the LSMW, but i think LSMW may have such flexibility to use such reports, thanks to SAP.. it was an adhoc report i tried to combine, so writing a program may be much more time consuming.

Error Message when trying to view/edit clips from Flip Cam

I am trying to edit some video from a flip cam on Final Cut Express 3.5.1 and it won't play. I've imported it both from an external HD and also the laptop itself and both times I get 2 error messages. First "General Error" then "Error: Out Of Memory"
I've already tried deleting my preferences but that didn't work.
Please help

Having owned several flip cams, I can tell you that the raw video clip coming out of the camera itself is a .avi file. If by chance someone had changed the extension of the raw video clip to mp4, or whatever that FCE (final cut express) likes, that will not change the fact that the clip is unusable without washing it through a conversion process. Im all in agreement on free.

I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

Download and open this program, lets you look around your I phone as if it was a disc drive, might find em in the iphones drive.
http://www.macroplant.com/iexplorer/

Simulate camera input with Java Media Framework

I'd like to ask, if there is a way to simulate camera input with JMF?
I'd like to write a program that registers (somehow) in Windows a new camera device, and I can create a video stream in Java that supplies data of what is "visible" through that "software camera".
Is it even possible with pure Java (with JMF)?

Bump!
The question is sill open and Dukes are waiting.

Just bought the new iPhone4S yesterday, and my back camera isn't working/loading up. But my front camera works fine. What's wrong? Can anyone help?

Just bought the new iPhone4S yesterday, and my back camera isn't working/loading up. But my front camera works fine. What's wrong? Can anyone help?

I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
Good luck!

I have an iphone 4 and i'm having lot of problems: my back camera is blurred although my front camera is fine and working normal. my biggest problem is that the screen is showing colored horizontal lines

I have an iphone 4 and i'm having lot of problems:
_ my back camera is blurred although my front camera is fine and working normally
_ my biggest problem is that the screen is showing colored horizontal lines(as perhaps electrical problems). The phone did fell and I already changed its back and front but everything was normal until these problems appeared suddenly
Please can somebody help me to solve it and tell me what are the reasons?
Thx

you can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement

I had to reinstall ox and snow leopard on my imac g5. I used the migration assistant on my macbookpro to copy everything onto the imac. The apps came in fine, but all folders say "no access." None of my user names seem to work. What now?

My iMac G5 was running too slow. I tried everything I could think of or find in the literature, but finally had to start over by reinstalling OX and then Snow Leopard. I lost all my folders and applications, so I used the Migration Assistant on my MacBookPro to copy everything onto the iMac G5. The applications all came through fine, but all of my folders have the "no access" icon on them. I followed the instructions I found on line, but none of my user names worked. What do I do now? Am I just out of luck? The only other alternative I can see is to transfer all my folders onto a thumb drive and put them into the iMac, but that will be slow and cumbersome.

Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed.

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

Entire video isn't showing up after download into imovie from flip cam

Hi there....
I'm a new user to imovie, so am having a little trouble here....
After I load a video from my flip cam, the program says it has downloaded the entire video (say 22') then when I go to put a project together only a short part (like 9 mins) is actually shown and available to edit. Where did the rest go? Are there settings I need to change in order to get access to the rest of the original video.
Any help would be greatly appreciated!!
-lynn

Mac OS X
Version 10.6.8
iMovie '09
Flip Video
mino HD

Flip camera inputs fine, exports freeze

Similar Messages

Maybe you are looking for