Flip text vertically in top row

I need to have the top row (banner) text run vertically because the data below is only 2 o3 digits wide. I can't seem to find the area where I can either flip or change the text direction of that row.
Please advise.

AFAIK, this feature is unsupported. However, a workaround is to label narrow columns with text boxes instead of in a header row. Text boxes can be rotated as needed.

Similar Messages

Why isnt the top row of my keyboard working

my ipod touch (4th gen) was working perfectly this morning
later today i was playing vooleyball with my brother and i had set my ipod down in the grass
then when i went inside i was answering somw of my texts but the top row of my keyboard wasnt working the backspace buttoin isnt working, its hard to press the send button, and the thing where you slide down to look at messages/notifications and the weather isnt pulling down
PLEASE HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

HT5624 I was prompted to update to ios7 so I did as usual. But this update has made my ipad a piece of junk. I am unable to access Siri, I can't read the faint print particularly those tiny letters on the top row which show the visited websites, etc.

I updated to iOS 7 last might after being prompted by Apple. This caused me to lose many useful features of my iPad2. First I find that Siri has disappeared. When I contacted Apple support, the guy who took my serial # and model # verified things on his end and said emphatically that I should have Siri, but could't help me find it. Another rep simply disconnected me after seeing that she was unable to help me with the problems. After wasting hours with these people and waiting several minutes for their promised supervisor to come online, I was again disconnected by them. My second major problem I wanted solved was the hard to read fine and faint print. I don't have good eyes and with iOS 7 on my iPad2 I am now unable to read the top row which has the list of websites in avery faint and fine print. I could read everything on my iPad until yesterday evening when I made the mistake of updating to iOS7. Till yesterday evening I loved my iPad but after that update to iOS 7 last night it is a piece of junk for me. Hope there is help somewhere out there to restore Siri and other useful features of iOS 6 or get iOS6 back on my ipad So I can use it again. The chat with apple support has not helped at all as they themselves did not know that Problems like the ones I mentioned to them even existed with this iOS 7. I want my iOS 6 back!!!! CAN ANY ONE HELP !!!!! Also how can I reach anyone in Apple who is knowledgable and also has some authority to do something about it.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

How to align text at the top and bottom of a cell?

I'm making a periodic table and need help with aligning text at the top and bottom of a cell. I'll have a picture in the middle of the cell with text above and below the pic. Thank you in advance for any kind of suggestions you can give me.

It sounds as though you want to have 3 separate items inside of a single cell; text at the top of the cell, text at the bottom of the cell, and then a picture in the middle of the cell. I am no expert, but to my knowledge that is not possible (someone please correct me if I am wrong.) I also cannot figure out how to put a picture inside of a cell itself.
I do have a way to accomplish the end result so long as what you need is the final look and not a useable table in numbers.
Create 2-3 cells for each element. (The middle cell, unless you can put pictures in a cell and I don't know, would just be there for peace of mind, but would hold the picture if you can, I would just do two if the pictures are to be in front of the cell anyway.) The top cell align text to top on the Text tab of the inspector. The bottom cell, align text to bottom on the same tab. Then place the picture in the middle. Now, you have what you want except there is one or two lines dividing the cells. To get rid of this, either click the middle cell if you have one, or the top or bottom cell. Click on the Cell tab of the inspector. Select the bottom border and/or top border button and select "No Border" under border styles. To make this fast, select a full row at a time, or use command click to select all of the same type of rows (middle, top, or bottom) and change all cells at once.
I hope this helps. Best of luck!
~Bret

How to align text vertically?

This seems like it should be really easy: On a simple text slide, how do I align multiple lines of text vertically? Do I have to eyeball it, or is there a way to fix it exactly in the center, top to bottom?

Hi -
There is no automatic way, but there is a way to make it slightly easier.
After you enter your text, grab the clip of type and move it to a portion of the timeline where there are no other clips.
In the Canvas click on the button on the top right and select Checkerboard:
!http:/www.spotsbeforeyoureyes.com/CanvasCheckerboardBG.jpg!
This will make the background a checkerboard so you can count the squares to verify the top and bottom line are equidistant from the TV Safe Guidelines:
!http://www.spotsbeforeyoureyes.com/CanvasCheckerBoardExample.jpg!
When you are done positioning the type, grab the clip and place it above the clip you originally wanted it to appear over.
You can either leave the Canvas set to display a checkerboard when there is no video present, or switch it back to Black.
Hope this helps.

Center text vertically in 6i

I was wondering if there was a way to center text vertically in a text field in forms 6i.
I have a banner at the top of my form as a text item, and I need the value(s) to be centered horizontally(which I have already done) and vertically which I am wondering how to do. Could someone please tell me how?
TIA
C

It does not. It's specific to table cells, or things with the
table-cell
display style.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kiusau" <[email protected]> wrote in
message
news:gnesja$osr$[email protected]..
>
quote:
I need to center the text vertically in the div at the bottom
of this
> page.
> How do I accomplish this?
>
> Create a single cell table inside the <div> tag
and apply vertical
> alignment
> to the <tr> tag. I do not know, if vertical
alignment works with the <p>
> tag.
>
> Roddy
>

Are we able to Flip Text in Fireworks?

Dear friends,
Need a little help.
Are we able to Flip Text in fireworks, or shall we use
different platform?
Like for example
Have a Small Image in Background.
Then have put Text on top of it .. like
"WELCOME" and then after 1-2 seconds changes to
"Enjoy your visit" And then again after 1-2 seconds changes
to
"please e-mail" and then atter 1-2 seconds changes back to
"WELCOME" and repeats
How can we do this
Thanks
Owais

Choose Help > Using Fireworks > Creating Animation.
Here's a tutorial you might find useful.
http://www.informit.com/guides/content.asp?g=flash&seqNum=370&rl=1
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Getting text to the top of a table cell

I'm sorry, I have asked this before but I still have nothing that works.
In a table I want the text to start at the top of the cell. I can force it with a clear gif and the end, but surely that is not right. It often works OK in Safari and Opera, but not in Firefox or IE.
I have copied some code below. It seems to me that the text should be aligning top, but it remain vertically centred in live view and all browsers (MAC).
What am I not seeing?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<link href="properllers.css" rel="stylesheet" type="text/css" />
</head>
<body>
<table width="880" border="0" align="center" cellpadding="0" cellspacing="0" class="top">
<tr>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
<tr>
    <td height="500"> </td>
    <td> </td>
    <td><h1 class="top">Text test header</h1>
      <p class="top">Berci accuptatet facerum, simus, quatiae pori tem arum id et exces aute erum inciumquo temquos essi nem utam, int aut harionsequo entintius solum est in consequo odi dolenimpe laborum se vel iliquo voluptas ex entorerum rest venimaxima sit am aut arumquam, tet que necererchil et mo vid ut mo ilic totaquam apitatem. Et illaboratum hilleni hillab iusaperunt landunt inctat.<br />
        Mus, ut eum ut ut omni qui aliquas peribus.<br />
    Us repudit, volupti ssequid modionseque pero consernatur? Qui que volorei umquae dem aut hilis am, cus, sequam quid ullam, idera della vent errovitis nobis minia simus et quos eum de cuptaec turiorio. Nequaspercia alis andae moluptae. Vid quunt enihit la nempores volupta alibus, occaborum ist odi volorepres que eum quo id underio tem res dolute omnienis in porro imoluptas doluptat im faccus re porem rero comnihicim e</p></td>
    <td> </td>
    <td> </td>
</tr>
<tr>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
<tr>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
</table>
</body>
</html>

The default alignment in a table cell is LEFT MIDDLE, i.e., left horizontal and middle vertical. If you have no specification in your code for anything other than that, then that's what you get. I see no such specifications in your code, so your symptoms are not surprising. To make things align to the top of a table cell (in HTML4.01) you would use <td valign="top"> or in XHTML you would use CSS to bring the content to the top of the cell, e.g., <td style="vertical-align:top"> (inline CSS shown for clarity).
Be aware that text contained within a paragraph or an <h#> tag WILL HAVE A TOP MARGIN, so if you want that text to be flush with the top of the cell, you will have to control that top margin on the container tag, too.
In your case, I'm assuming that this is one of your attempts to get to the top of the cell -
<td><h1 class="top">Text test header</h1>
But we have no idea what rule is specified by the class="top". At any rate, you will have only affected the alignment of the text within the <h1> tag and not within the table cell by that. Perhaps <td class="top"> would be better? But best would be (if you wanted ALL content in the table to be at the top of the cells) to use a descendent selector like -
table#whatever td { vertical-align:top; }
and then give that table the id="whatever".

My iPhone 5 only display the apple screen with text on the top (like a command prompt). Has anyone else seen this???

I was checking my mail and suddenly i get the apple screen with text on the top (like a command prompt). It won't receive phone calls and it doesn't respond to anything. I tried to force shutdown, reset, etc and nothing happened... Now the screen changed to vertical gray lines. I'm attaching a picture of both screen displays. Someone please help!!!!!

Try a reboot by holding both the power and ome buttons until the apple logo appears. If that does not bring it back, take it to an Apple store genius bar and have the technicians test it.

Can I change the reort total: text in the summary row in a report region?

Hi all,
This might has been asked before, I tried searching the forum but couldn't find an answer. In the report attribute, if I tick the sum checkbox then run the page, the last row would give me the summary numbers which is what I want. However is there a way I can change the "report total" text in the last row of the first column?
Thanks very much for your time.
Pete

Hello user9546327,
I had the same problem, until I realised that the text seems to be printed under the first column of the report. If that one is a hidden column, the text won't be printed in the report.
Solution:
In the 'Report Attributes' tab, move the first visible column (= attribute 'Show' is ticked) to the top of the report columns.
Best regards,
Sabine

Vertically align top on textField

I have dynamic textField and need to align my text vertically top on textField. How can I set my text vertically top ?

I don't understand your question... do you want the text on just one line or do you want the text to go like:
a
b
c
d
Please explain a little more.

Aligning text vertically

I know how to center text horizontally within the text box in CS5 Extended (just click the same "center" icon you would click if you were using Microsoft Word or any other program), but how can I center it vertically (have it placed equidistant from the top and bottom of the text box)? I know there must be a way.
Thanks!

I think the question has to do with text arranged vertically, rather than text that is centered on a vertical line dividing the cell.
The example in column A is available in cells in Pages Tables. But of a kludge, though, as its achieved by inserting a return (option-return if you're typing it in the cell) after each character in the string.
The example in column B is made by entering the text into a text box, then rotating the box using the Metrics Inspector, aand placing it in front of the cell where it is to appear.
The example in column C has been horizontally centered in the cell using the alignment button on the format bar. There is also an alignment button in that bar to center the text vertically in the cell, but I hadn't used it before capturing the screen shot. This text also has an option return inserted after each of the first two words.
Regards,
Barry

Split view of table so top rows & bottom rows can be viewed simultaneously

I sometimes work with large tables (thousands of rows) and need to be able to see what's in the top few rows and bottom rows at the same time. This is easy in Excel; there's a gizmo at the top of the vertical scroll bar that can be used to give a split view. I'm a newcomer to Numbers and have not yet found a way to do this. Any ideas, or is it simply not possible?

I know this isn't a great solution but if you really really need to see part of the top and part of the bottom of the spreadsheet at the same time, you can hide the rows in between and unhide them when you're done
Another, maybe better but still not so great way would be to use the filters in the reorganize panel:
Add a new column. In that column, put a character (a dash, letter, etc) in the rows you want to be visible. In the reorganize panel, make a filter to show only rows that are non-blank in that column. You can quickly switch the filter on and off from here.
Neither solution is very dynamic (you can't scroll through the bottom half of the spreadsheet while still looking at the top) but it may help if you are messing with only a few rows at a time.
Lastly, if the top rows you need to see are header rows, you can freeze them. That's similar to the split view in Excel but can only be done for headers (of which 5 is the max).
Message was edited by: Badunit

Design top row of user entered information to repeat at top of each page

I am trying to design a form that will allow the top row (or top few
text fields) to repeat at the top of any additional pages that are generated as a result of flowed content.

Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!!

Flip text vertically in top row

Similar Messages

Maybe you are looking for