Flip Vertically - Field Monitor and captures in CS5

Hi,
I am using a Redrock micro M2 lens adapter on my Canon XH A1 (without the expensive flip accessory), and so the picture is inverted.  I noticed that in OnLocation CS3, there is an option to flip the image vertically in the field monitor to correct this.  However, I have OL CS5.5 and this feature doesn't seem to be there, or at least I can't find it.  Anyone know how to flip the image vertically in the OL field monitor?  Further to this, will the actual captured files be made flipped as well, or would it just be in the monitor?  Appreciate any help.
Thanks,
Dan

Hi,
I am using a Redrock micro M2 lens adapter on my Canon XH A1 (without the expensive flip accessory), and so the picture is inverted.  I noticed that in OnLocation CS3, there is an option to flip the image vertically in the field monitor to correct this.  However, I have OL CS5.5 and this feature doesn't seem to be there, or at least I can't find it.  Anyone know how to flip the image vertically in the OL field monitor?  Further to this, will the actual captured files be made flipped as well, or would it just be in the monitor?  Appreciate any help.
Thanks,
Dan

Similar Messages

  • Monitor and capture at the same time?

    Is it possible to view/monitor a video (live from a quickcam) and capture at the same time?
    I looked at the solution here:
    http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html
    And found "Video Capture Utility with Monitoring" sample program. However it only allows capture! There is no live display of video viewing while the capture is happening.

    Actually, the sample program works once I uncheck Audio.
    I do not have any Audio input device, so I guess that is causing the problem.

  • CS6 - Why is my rendered timeline playing back as black/white and flipped vertically?

    This doesn't make any sense. It only happens inside of the preview monitor in Premiere Pro CS6. When my footage isn't rendered yet, it plays back just fine, but when I go to render everything in the time line, it makes everything flipped vertically and black/white. When I export a render to a file, it's completely fine. This only happens in Premiere and not AE or Prelude.
    I'm using a PC, Windows 7 64-bit. My computer has quad-core i7 running at 3.8ghz, 16GB of RAM, and a 1GB GPU. I just upgraded from CS4, where I never had any of these issues in Premiere. Thanks!

    There have been other messages (not exactly like yours) indicating that CS6 is enough different that you will need to update your graphics card driver
    Do NOT let Windows update do this... go directly to the nVidia or ATI site and find the most recent driver for your (un-named) 1Gig GPU

  • Current Time code field and "Capture Now has reached the end of tape......"

    Hi I just got my new iMac and I have lots of space. When I open up the Final Cut Pro and press the capture now it gives me the notice that it had reached the end of tape, but I haven't reached the end. I have vhs in the VCR machine and it is connected through the digital device. Not only that but my current timecode field is always running and I can't stop it. Also I used the uncontrollable device and when the tape has reached the end I tried to escape but it seizes up and I lost my capture. what shall I do?

    Yeah, I was just thinking about that. I'm doing this on an iMac.
    What's going on with Capture Now? I know staying digital would be best. But I'm kinda doing this project to give myself some hands-on time with FCP to get familiar with it. I'd like to capture this stuff through the Log And Capture GUI if I can. Sooner or later, I'll need to do it with something else (possibly an old VHS tape) where I won't have the option of staying digital.
    Anybody?

  • Color management between CS5, monitor and printer?

    I am using CS5 and can not seem to match what I see on my monitor with what prints out. I have a Dell 3007HC 2650x1900 monitor and a Epson 3880 Printer, using windows 7 pro. I am familiar with how to change settings I just can't get the right combo. Any help would be much appreciated.

    Have a look at this article - it goes into this issue in detail;
    http://www.computer-darkroom.com/ps12_colour/ps12_1.htm
    Cheers,
    Alan

  • MIRO issue (urgent!), amount and quantity fields are not captured from PO

    Hi,
    When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
    GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
    We're getting this MIRO issue for "all" PO and Service Entry Sheet.
    We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
    Thanks in advance.

    I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
    Cheers.

  • Flip Horizontal and Flip Vertical

    Hello Adobe,
    Bridge implements rotate 90 cw, 90 ccw, and 180. Having these functions available as a right-click / cmd-click context menu is extremely convenient.
    However, what about the companion flip horizontal and flip vertical operations ? This is a very common thing to want to do - particularly when working with scanned transparency images. Adobe Lightroom implements this - I belive.
    Bridge team, can you add this small feature please ?
    Sincerely,
    Craig Hansen-Sturm

    You can do multiple photo flips in Develop if you turn AutoSync on.  Just make sure to turn it back off as it can cause all kinds of accidental messes

  • "name" field grayed out in Log and Capture

    I'm using the latest version of FCP and for some reason the "name" field is grayed out in the log and capture tool. Even when i select "prompt" the clip goes untitled into the logging bin. I am capturing on the fly with no deck control. However, if i try to log a clip with deck control, the prompt works but i still can not enter a clip name in the "name" field on it's own.
    any suggestions?
    dual 2ghz G5   Mac OS X (10.4.9)  

    This is the Final Cut Express. You should try your question on the Final Cut pro forum.

  • Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

    New Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.
    Tried restarting, checked the lock, gyroscope.

    Hey Oprion,
    Thanks for the question and congrats on your new iPhone 5c. The orientation of your iPhone will depend on the application you are using. For example, most of the built in applications only support the three main orientations (Horizontal, Vertical, Horizontal), whereas the Voice Memo’s application will operate “upside down” for easier access to the microphone.
    Change the screen orientation - iPhone
    http://help.apple.com/iphone/7/#/iph3badf94ec
    Thanks,
    Matt M.

  • Need to monitor Mac on Network and Capture by video

    Hi,
    I looking for a software program that will allow me to monitor another Mac on my network without being known that I am monitoring and have the ability on my end to capture their activity by way of video. I am also unsure if I may need to different software programs to achieve this. Can anyone suggest anything?
    Thanks for your help.

    Perhaps something like eWatch would work for you. Leopard will also offer some tracking and monitoring abilities as part of the upgraded Parental Controls.

  • Why does my Wallpaper JPG (created CS5) pixels on 1 monitor and not another? Artwork is 600dpi, rgb,jpg, 30" x 16.5" size, 16:9 ratio. Does monitor resolution matter?

    OS 10.6.8, my monitor resolution = 2560 x 1440.

    Don't worry about inches or ppi. Only worry about pixels when designing for a monitor. You will be much happier with the results.
    inches x ppi = pixels
    30 x 600 = 18000 pixels
    16 x 600= 9600 pixels
    Printing as you can see is another matter, it requires a much higher resolution. Usually around 300ppi but I think you can see the difference.
    Find the highest resolution of the two monitors and design for it. Then reduce for the other monitor never the other way around. It is much easier to remove pixels than to add them.

  • OLCS3 Field Monitors display black video in single display

    I am using OL CS3 on WinXPSP2 with Canon HV20 camcorder on FireWire to my Lenovo T60 laptop, and had some success in getting clips recorded yesterday. However, no luck today. The Field Monitors do not show the live video feed, but remain black.
    I rebooted my laptop, plugged in FireWire port (in an Adaptec PCMCIA card), started OL, and turned on HV20 camcorder. In OL, the Canon HV20 is listed in the Devices list, and selecting it causes Field Monitor to display text label "canon hv20 camcorder". The Field Monitor(s) still show black video...while the camcorder display shows the live image.
    My laptop has only the integrated LCD panel display in use (as at boot time), the video adapter is ATI Radeon Mobility X1400 which does support dual displays. I used ATI Catalyst sw to check the video settings, which indicate there is only one display in use, it is not running clone mode or extended desktop, and the video overlay is set to show in Standard Dual Mode (which indicates video would show on both Main display and Secondary displays in original source video aspect if two displays were in use).
    I read the Adobe knowledge base kb402180 "Field monitor does not display video when used on a computer with dual monitors (OnLocation CS3)" but it does not seem to solve my problem.
    I can use Premier Pro CS3 to capture video I recorded to tape on the HV20 using the same hw setup. So it seems the FireWire link is okay, the camera can push a video stream on it, and so I remain suspicious of the video overlay settings. Only other thing is maybe the camera is not pushing live video stream to the FireWire cable? I'll check on that.
    Anyone have any help?
    Thanks,
    Patrick

    Brooce,
    Thanks for the tip on the bug form...that is great.
    As it turns out, I ran a parallel request into the Adobe support forum, and Erik H got me the answer to this problem yesterday....I found that deleting the appProps.xml file in C:\Documents and Settings\(your user folder)\Local Settings\Application
    Data\Adobe\OnLocation CS3 solved my problem.
    MY GUESS
    I use my laptop with dual external displays most of the time, but while trying to record with On Location I only use the integrated LCD panel while in the studio. I am guessing that OL gets confused if I happen to run it in both of these hardware configurations....the appProps.xml could get written with dual displays in my office and then OL might expect them even though the current hw config is a single panel while in the studio.
    -Patrick

  • SX50 HS with Field Monitor

    Hi,
    Is it possible to connect the SX50 HS during shooting to an external Monitor via the HDMI output and do the composing / focusing on the much bigger screen?
    Unfortunately I have no Mini-HDMI cable to test, so before I invest in cable and monitor I prefer to ask.
    Thanks
    Robert

    CHDK does have Remote options for using several controls, but none for viewing live streams which I'm assuming what is meant by the OP - yes? I've been all over the CHDK PDF and there isn't a mention of streaming being made available to see better the Focussing and so on. Is there a loupe "shroud" that one of the Hoodman options:
    http://www.hoodmanusa.com/prodinfo.asp?number=h-lpp3
    http://www.hoodmanusa.com/cvp.asp
    OK, I just tried with a mini to standard HDMI to my pro field monitor, which I do use with my Canon XF300, but to test I lashed it up to my SX50  - and no. I can't get a live stream from the SX50 output to see, only on Viewing previously captured work through Review. Nothing live.
    Grazie

  • No Audio during Log and Capture

    Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
    My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
    Thanks.
    John

    ... as Bogie says.
    However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
    Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
    Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
    Not me... I'm to old to change my ways.
    Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
    CaptM

  • Preview disabled in log and capture

    I am using Final Cut Pro 7 on the latest iMac i7.
    I have a DVCam deck connected to the iMac via a firwire 800 cable.
    There is a DV tape with DV footage in the deck.
    I am able to control the deck from log and capture but the display is the colour bar window with PREVIEW DISABLED on it.
    I have checked and double checked that my settings are correct, that video and audio are selected in capture settings etc etc.
    Everything is selected correctly on the deck.
    All mu suer preferences and presets are also correct.
    I have trashed FCP preferences as well.
    The content on the tape is viewable fine on the camera and on an external monitor.
    So, in summary:
    I am unable to log and capture DV material from the tape even though the deck is controllable from log and capture window.

    It's a Sony DVCam DSR 11 deck which will play mini DV or DvCam tapes recorded in PAL or NTSC.
    I haven't changed anything on the deck at all since last usung it a few weeks ago with the G5 and Tiger OS. I simply unplugged the firewire and plugged it straight into the new iMac.
    The old G5 was running FCP6, but because the G5 and Tiger (it's was a pre Intel machine) won't run FCP7 I decided to use this as the reason to upgrade and chage to the iMac i7 Lion OS.
    The material in question is PAL DV on mini tapes.
    The camera is a Panasonic DVX100A and only capapble of recording in SD DV.
    All the selection switches are correct on the deck. I'm puzzled why I can get the image and capture from the camera, with the same cable, and yet not from the deck.
    Thanks Michael

Maybe you are looking for