Flipping a chart so the low numbers are at the top...

How do I create a chart that shows the low numbers on top? I'm trying to show the rank of items over time, with lower numbers being higher in rank...

There was a post on a similar subject a while back. I'm searching for it now. The gist of it was you will need a second column that is the negative of your numbers. It had to do with the X axis but you could apply it to the Y axis as well.
Ahh, here it is:
http://discussions.apple.com/thread.jspa?messageID=9714737&#9714737
Message was edited by: Badunit

Similar Messages

  • How do I create a chart where the lower numbers are at the top?

    I'm charting data that shows a ranking, where the rank can be a number anywhere from 1 to 1000. 1 is the highest. When I create a chart, 1 is at the bottom. How do I flip the chart so 1 is at the top and 1000 at the bottom?

    Philip,
    I think Bad Units suggestion is similar and better.  Rather than simply inverting the sign to that with an offset:
    I suggested
    0  - n
    Bad Unit suggested:
    100 - n
    (assuming there are 100 ranks)  if there are A ranks then I suggest (like Bad Unit):
    A - n
    This can be accomplished by moving the current data to another column, then performing the calculation in the column where the chart takes its' data.
    move the data over to an adjacent column
    Now enter the formula to adjust the rankings:
    B2=100-C2
    select B2 and fill down as needed.  To do this for a large data set select, and copy, B2.  Then select B2 and scroll to the end of the colunm using the scroll bar then shift-click the last cel in the column, then paste.

  • I want to know what the phone numbers are for the 2 iphones associated to itones

    need to find the phone numbers for the 2 iphones associated with my itune account.

    I think they are any device associated with your Apple ID that you have downloaded items from the apple or iTunes Store to. I'm sorry that I don't understand all this. My account shows that I have my iPad and 2 iPhones in use but I have had a lot of phones and I don't know which ones I used. One of them may also belong to my ex husband. Yuck
    Thanks for your patience,
    Rhonda
    Sent from my iPad
    Rhonda White

  • How to fix an iPod touch that does not charge but gets hot in the lower back area?

    I have a 3rd generation iPod touch 32gb and it will not turn off, nor will it charge. Plugging in to my computer, iTunes does not even detected. Even if I leave it to charge, it does not detect it. The odd thing is that it get really hot in the lower back area of the iPod. It is hot to the touch, as though it were 80 degrees+. Anyway for me to fix this?
    The iPod is way out of warrenty, so I wonder if a Genius bar appointment will even help me. But I will give them a try.

    Replace the battery.  If that does not work, then system board is toasted...

  • I have just purchased photoshop elements and premiere package. I tried to download them but it tells me the serial numbers are inapplicable. I notice the platform says windows and I am using a mac book pro.  It didn't give me an option when purchasing. wh

    I purchased Photoshop Elements and Premiere package today.  I have been trying to download them but it tells me the serial numbers are inapplicable.  I am using a mac book pro and I have just noticed that the platform in my receipt says 'win" .  I don't remember being given an option for mac or windows  when purchasing.  what can i do now?

    Return, cancel, or exchange an Adobe order

  • I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

    The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

    You must go in the labview option menu, you can select 'use the local
    separator' in the front side submenu (LV6i).
    If you use the "From Exponential/Fract/Eng" vi, you are able to select this
    opton (with a boolean) without changing the labview parameters.
    (sorry for my english)
    Lange Jerome
    FRANCE
    "Nina" a ecrit dans le message news:
    [email protected]..
    > I would like to read a text file in which the decimal numbers are
    > using dots instead of commas. Is there a way of converting this in
    > labVIEW, or how can I get the program to enterpret the figures in the
    > correct way?
    >
    > The program doest enterpret my figures from the text file in the
    > correct way since the numbers contain dots instea
    d of commas. Is there
    > a way to fix this in labVIEW, or do I have to change the files before
    > reading them in the program? Thanks beforehend!

  • All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. Permissions are set to 'Custom' in the get info window and I can't change them.

    All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. I have 3 user accounts set up and I cannot access any of them.   Permissions are set to 'Custom' in the get info window and I can't change them. Originally I had Snow Leopard installed on one hard drive and 10.5.8 installed on another.   I started to have some problems accessing data between them and so I tried changing the permissions on ONE hard drive partition.   The next thing I know, all my drives are locked (except the ones with the systems on them), the small lock appeared in the lower left corner of the drive icons and I don't have permissions to access any of them.   In the get info window, permissions are set to 'Custom' and I can't change them.

    There is suddenly a lock icon on my external backup drive!
    Custom Permissions

  • When I convert a Word doc to PDF, some of the page numbers are missing.

    I'm using Word 2003 and Acrobat Pro 7.0. When I print out the Word doc all the page numbers are there, but when I concert to PDF most of them are missing. Any suggestions?

    How are you converting? What are the job settings for the PDF conversion? What if you print to the Adobe PDF printer?

  • I am having problems because two phone numbers are on the Apple ID, how do I choose one for imessage?

    I am having problems because two phone numbers are on the Apple ID, how do I choose one for imessage?

    Hello,
    In my opinion, this is the best procedure to use to update your BB OS:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    However, the official download site:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    shows your installed OS to be the current version from your carrier. Therefore, how your friends got a newer OS is a question to ask them and/or your carrier.
    You are, of course, free to use (via the above procedure) any carriers OS package...if another has the newer OS you want, you can use it. If you choose to do so, then simply insert, between steps 1 and 2 in the above procedure, the deletion, on your PC, of a file named VENDOR.XML
    Good luck.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems,

    Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions.  When I click to accept the terms and conditions, nothing happens and the editor fails to open.  Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open.  Any advice?

      Premiere Elements 10 is now 64 bit, but not PSE10.
    Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
    Click image to enlarge
    Turn off face recognition and the auto-analyzer to improve performance.
    When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

  • Standard FM to get the Serial Numbers associated with the PO

    Hi,
    I'm using the Standard FM "BAPI_PO_GETDETAIL1" to get the details of the PO which I have created. The FM is returning the details such as PO HISTORY, POITEM, POHEADER etc. I want the serial numbers associated with the PO.
    Please help me to get the serial numbers which are issued to the PO since the material assigned to the PO is serialised material. Another Standard FM "BAPI_PO_GETDETAIL" also I have tried but there is no serial number collection in that FM.
    Thanks in Advance,
    Mohan.

    These function modules will not return you the serial number. May be you can use following logic.
    You can use table ser03 where in you wll input material document number and find out obknr. Pass this obknr to objk table and find out seril number.
    And to find the material document number for the relevant purchase order number you can use table EKBE.
    So for EKBe-BEWTYP= E and EBELN= purchase order find EKBE-MBLNR(belnr).
    The material document number and year  found above pass it to SER03-MBLNR and SEr03-mjahr and find SEr03-obknr.
    The obknr number found above pass it to OBJK and find serila numbers..
    Regards
    Sangeeta

  • "The even-numbered length of the DEC field I_DFZ_EX can lead to problems"

    Hi All,
    I am getting the following warning message while activating the PP datasources,
    2LIS_04_P_MATNR
    2LIS_04_P_ARBPL
    Warning Message: "The even-numbered length of the DEC field I_DFZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field I_DLZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field S_DFZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field S_DLZ_EX can lead to problems"
    Checked in SDN, but no answer.
    Need your expert solution, to resolve.
    With Regards,
    Sekhar

    Thank you Des, for immediate response.
    But i have already gone through the Note.
    As we are using ghe standard datasources, can you suggest which option should i use to resolve.
    Solution
    If the field is not manipulated in the customer exit or elsewhere, no
    processing is required.
    If you change the field, the following possible solutions are available:
    1. You can make sure that the number of the characters does not
    increase after the manipulation.
    2. If you can change the extract structure of the DataSource without
    affecting other scenarios (for example, if it was generated in
    transaction RSO2), you can increase the length of the DEC field (or
    CURR, QUAN) there to the next odd character (in the example above:
    from DEC 4 on DEC 5).
    3. If neither of these solutions are possible, you can use a customer
    append that contains a relevant DEC field (or CURR, QUAN) with the
    next highest odd length. This can be used for the result of the
    calculations. This means that you do not have to manipulate the
    previous field.
    With Regards,
    Sekhar

  • Why is there a circle on the lower left side of the images in the Event library?, Why is there a circle on the lower left side of the images in the Event library?

    There is a circle on the lower left corner of the images in Event Library, what is the cause please?

    I wouldn't spend too much time worrying, but also don't assume that it will continue functioning normally.  I dropped a MacBook Pro and dented it in around the same place, and it worked fine for a month, then died out of the blue.  Any physical trauma can produce damage that can worsen over time, as cracked or weakened connections expand and contract due to heating and cooling.  In my case, repairs would have been more than $1,000.  (I chose to just buy a new one instead.)
    So, hope for the best, but plan for the worst.  Make sure you are maintaining a good set of backups, and be prepared for the possibility of a large repair bill in the future.

  • Why do i get a window in the lower right corner of the screen that says "high memory usage"

    why do I get a window in the lower right corner of the screen that says "high memory usage" on my compaq presario using windows xp home edition?

    Hi,
    No just turn the monitor off, not the product off. Which version of NIS are you using ? Please see the following screen:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I amusing elements 12.

    How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I am using elements 12.

    oesrowstreasurer
    Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
    Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
    https://forums.adobe.com/community/photoshop_elements
    The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
    We will be watching for a confirmation on what program you are using.
    ATR

Maybe you are looking for