Flipping from PSE8 organizer (or batch)

Hi,
I am organizing scans taken of over 1000 slides and some of them were clearly scanned from the wrong side (about 30% of them). Is there a way of flipping the images horizontally from the organiser, or at least of flipping them as a batch job? I have tagged the flipped images, so is it possible to get a list of paths to files with that tag (which could be passed to a batch convertor).
Thanks,
Steve

Peter I would love to find a solution for you.
There has always been a bug with PSE7 requiring edited RAW images from ACR to be manually imported back into PSE Organizer. This may apply to Jpegs and could have rolled-over into PSE8.
As PSE8 is fully supported I suggest you raise a ticket with Adobe Support through the contact link but it does not guarantee a solution to your problem.
This Adobe tech Note gives further details.
http://kb2.adobe.com/cps/408/kb408150.html

Similar Messages

Editing with Photoshop CS4 from PSE8 Organizer

I have made numerious attempts to use Photoshop CS4 to edit an image in the PSE8 organizer rather than Photoshop Elements. There is a shortcut to launch CS4 which is Ctrl-H rather than the usual Ctrl-I. CS4 launched and I complete the edit. I do a save as but Organizer retains the Edit in Progress red bar across the image (edited version) and this does not go away even when CS4 is closed.
If I close PSE8 Organizer the Edited file is no longer there, in Elements or indeed in the folder. The same happens whether I save as a jpg or psd file.
Can anyone point out what is going wrong or give me the correct procedure for making this work.
Peter

Peter I would love to find a solution for you.
There has always been a bug with PSE7 requiring edited RAW images from ACR to be manually imported back into PSE Organizer. This may apply to Jpegs and could have rolled-over into PSE8.
As PSE8 is fully supported I suggest you raise a ticket with Adobe Support through the contact link but it does not guarantee a solution to your problem.
This Adobe tech Note gives further details.
http://kb2.adobe.com/cps/408/kb408150.html

PSE8 Organizer and PSE9 Editor?

I've given up on PSE9 Organizer but I would like to use PSE9 Editor.
Is is possible, without having to manually load each edited file into the PSE8 Organizer?
So far as I can see it just isn't possible to get PSE8 Organizer to acknowledge the PSE9 Editor as an alternative editor, either in its own right or by changing .exe file names to try and fool it.
I can disable PSE8 Editor, get the file from PSE8 Organizer into PSE9 Editor, edit it, save it, (or Save As), but it won't appear into the PSE8 oganizer unless I manually import it.

Yes it can be done. This is how I did it.
Copy the PSE Editor application to another folder such as My Documents.
Rename the file - I called mine PhotoEditing
Then move the renamed file back into the Photoshop Elements 9 folder
It will be an exact duplicate of the original installation (shown with the red arrow)
Open the PSE8 Organizer and click:
Edit >>Preferences >> Editing>
Check the box - Use A Supplementary Editing Application
Then click browse and navigate to your renamed file.
Next time you right click on a thumbnail in organizer your new editor will show up in the dropdown list.

I just upgraded from PSE8 to 11 and can't find my catalog to convert.

I just upgraded from PSE 8 to 11 and can't find my catalog to convert. I watched the Manage My Catalog instruction video, but my old catalog doesn't show in the box. When I browse the DATA1 and DATA11 files in my PSE 8 folder the dialog box does not recognize them as catalogs. I assume the catalog is one of these file, since they contain over 16,000 entries, which is how many photos I had in PSE8.
What am I missing? How do I find and convert my old catalog?

Sometimes catalog conversion fails. It’s often a question of needing full permission settings and the easiest way to make it work is as an administrator directly from the desktop which bypasses the welcome screen background processes.
Make a shortcut for organizer as follows:
On Windows right-click anywhere on the desktop and choose New >> Shortcut
Browse to Computer OS C:
Find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
C: >> Program Files (x86) >> Adobe >> Elements 11 Organizer
Within the Elements 11 Organizer folder find the application PhotoshopElementsOrganizer (not Photoshop Elements 11.0)
Select (highlight) PhotoshopElementsOrganizer and click Next
Then click Finish.
Now right-click on your new desktop icon and choose “Run As Administrator” Then authorize by clicking yes in the User Account Control dialog.
From the Organizer menu click:
File >> Manage Catalogs
Then click the “Convert” button
Select your desired catalog from the list of previous versions of PSE to highlight it then click the “Convert” button down below it
You should receive a message when the conversion has been successfully completed and your earlier catalog will be automatically re-named. Choose the new name from the list and click the “Open“ button and you are good to go.

Upgrading from PSE8 to CS5, Albums, tags & mini bridge ?

Will my albums and tags from Elements 8 transfer to the mini bridge of CS5? Is there anything I can do to make this happen
or will I have to start over? Thanks!

If you find out the answer to this question, I would love to know. I have gone from PSE8 to CS5 and I am wanting to keep my albums and organizer. I am not sure how to do it in CS5.
Thanks!

Why do I not see my PSE6 slide shows in the PSE8 organizer?

When I open my Organizer in PSE8, the slide shows that I thought I transferred from PSE6 on my old computer show up in Organizer as a blank image with an hourglass in the middle. Nothing happens when I double-click on it. What did I do wrong and how can I best get the slide shows from my old computer? Thanks.

function(){return A.apply(null,[this].concat($A(arguments)))}
PSE8 has recognized and converted one of my two catalogs, but I can't find the other one at all. How can I get it from PSE6, converted to PSE8?
See the first section of this tech note, "Convert your catalogs":
http://kb2.adobe.com/cps/515/cpsid_51536.html
You can also use Windows Explorer to search your entire hard drive for all PSE 6 catalogs (named catalog.psedb); be sure to configure Windows Explorer to view hidden files:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_View_hidden_files
function(){return A.apply(null,[this].concat($A(arguments)))}
I would however like to transfer the slide shows which work fine in the converted PSE8 catalog in my old computer. Some of the files are pdf which I assume I could transfer by simply dragging and dropping. Is there a proper way to transfer just the slide show projects from PSE8 on my old computer to PSE8 on my new computer?
The only way to transfer slide-show projects is to transfer the entire catalog file -- you can't move or transfer individual projects. You can move the individual PDF or move files that the projects created, but of course you can't edit those later.

PSE8 Organizer with PSE9 Editor

I'm trying to use the PSE8 Organizer with the PSE9 Editor (don't like what they did to folder view in PSE9 Organizer).   I've tried to do it two ways: by setting the PSE9 Editor as a supplemental editor and by replacing all the files in the Photoshop Elements 8.0 directory with the files from the Photoshop Elements 9 directory.
The supplemental editor method results in:
a new version of the file being opened is created in      the organizer each time and that file is what is pulled into the editor (it's named _edited_# and added to a version set of the original each time)
can only get into edit from the edit menu (ie,      supplemental editor doesn't appear in right click drop down) - can learn      to live with this if item 1 can be corrected.
Files don't get locked in the Organizer when they get      opened - can learn to live with this, too
Replacing the files in the directory results in
The PSE9 editor opens when selecting "Edit with      Photoshop Elements" from right click drop down (or from Edit menu) but it doesn't bring a       file into the editor.
If I use the open command from the editor, it brings      the file in but doesn't lock it
Same problem with not recognizing the Organizer as      above.
Anyone have any ideas?
Note: I poked around in the registry a little but nothing jumped out at me immediately (adding the key for "CurrentCatalogPath" in the 9.0 section of Elements Organizer under the CURRENT_USER software key stopped the message that the organizer wasn't being used but still did not allow me the options to save changes in the Elements Organizer or add to version set)

I agree with your view point about PSE 8 Organizer. I also like it better for the same reason.. My work around is having 2 monitors. I keep PSE8 organizer on the left and PSE9 Editor on the right. Then I drag across. My catalog paths and settings in Both organizers is the same. Edited items from PSE9 will show up in 8....make sure your "watched folders" settings are set and the same in both organizers. Its a bit clunky...but it works for me...but I'm just a new guy to PSE.

PSE8 Organizer won't display on monitor

I have a really strange problem. I have a new laptop running Windows 7. I have a mouse, keyboard and monitor (among other things) attached to it via a port replicator so I can use the laptop as a desktop (whatever happened to good old docking stations?!?). I have had all kinds of problems since installing PSE8, but this one baffels me.
When I start up the Organizer, either from a direct shortcut to PhotoshopElementsOrganizer.exe OR through the Welcome screen, Organizer starts (and appears in the task bar) but only displays on the laptop screen. It won't display on my monitor. Now it worked a couple of times but then stopped working.
I'm hoping there is a very simple solution!
sue

Edit > Visibility was set to Show All Files. In Preferences, I unchecked all filter selections for Auto Analyze. No effect.
I have one folder with 3 .tiff files that PSE8 Organizer won't display. Trying to import the files and PSE8 says they are there but PSE8 cannot display them. No explanation. Windows Photo Viewer and Picasa have no problem displaying them.
I have deleted and made new catalogs with the same results for that folder. I cannot figure out what is wrong with these files. All other applications have no problem.
Any ideas?
Thanks!

PSE8 Organizer & Editing To CS5

I recently purchased CS5 and I have a very large catalog collection in PSE8 and would like to be able to open CS5 from my Organizer. When I right click on a picture I should have the option of editing in PSE8 Editor or CS5. When the window opens my only visible choice is PSE8. I can press CRTL + H and at that point CS5 editor does open but after editing and saving, my file is not being saved back into my catalog like it would if I was using PSE editor. I was told that CS5 should be listed as one of my choices but that is not happening.
Tim

I don't think this is available in right click menu options.
Alternatevely, you can set CS5 as your external editor in preferences and then the edited image should be saved as version set in Organizer.

Problems converting catalog from PSE8 to PSE 12

I've upgraded from PSE8 to PSE12. I've just tried converting one of my 10 or so catalogs - all are stored in custom locations on an external drive, since the total file size for all my images is larger than my C: drive's capacity - with awful results:
a.     there is now a copy of my folder structure and all files from the catalog in a folder C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs. Not at all what I want, and if I convert the rest of my catalogs it will fail when C: drive becomes full.
b.     my converted catalog has no ratings on any images.
c.     my tags and tag heirarchy have disappeared.
Each of these issues is completely unacceptable. There are literally thousand of hours of work in all my catalogs, which I cannot repeat. How can I convert my previous catalogs to PSE12 versions, retaining all ratings, tags and tag structure, and without duplicating every image file?
Rob

I had already tried optimizing the catalog, repariing the catalog, re-indexing visual simularity data and making sure there were no missing files. Basically everything I found at: http://helpx.adobe.com/photoshop-elements/kb/common-catalog-issues-upgrade-elements.html
I also used the Mac OS X Disk Utility to make sure there were no disk errors.
I have Parallels Desktop running on my Mac so I installed the Windows version of PSE12 and used it to convert the catalog of 63,000 pictures in under an hour. That put the catalog in a new location so I just moved the catalog from the Windows location to the Mac location. Now PSE12 on the Mac can access the new catalog and is working as expected.

Export from PSE9 Organizer

i use PSE9 on a mac.
i used PSE8 on a windows computer. there i could expoort several pics directly from the organizer to different formats and sizes.
now i can not find such option on my new software. is there a way to export from PSE9?
thank you

yes this is exactly the way i did it on my windows pc. it seems that this option is missing on macs...
thank you anyway for the answer..

A How To: Create a Widescreen High Definition Slide Show from the Organizer

[EDIT] I just tried another one and, weirdly, that produced an output with black bars around all four sides! So maybe this 'how to' is not 100%. I have considered deleting the post altogether but, as it does still produce a superior slideshow quality file than the standard ones provided with Elements, I've decided to leave it with this edit added at the top for additional info.[END_EDIT]
In answering a question in another forum I found a nice quick way to create proper widescreen high definition slide shows from just the Elements Organizer. Apologies if this is 'old news' to readers, but I've not seen this described elsewhere so I thought I'd share it.
The Organizer Slide Show creator, if not wanting to edit in PRE, provides a small set of Windows Media Player profiles to create .wmv files. But the best of these goes only to 1024x768 (a 4:3 monitor resolution setting). I've noticed, but never paid much attention to, that at the bottom of the Slide Size box there is a 'Browse for more' option that lets you search for additional Windows Media Encoder profiles. Investigation showed me that I can download the Windows Media Encoder software from Microsoft and create my own profiles. But even further investigation showed me that someone had already done this! I've tested their full HD profile and it works just fine (1920x1080).
So if you are just after a straightforward slide show (i.e. not needing PRE features) but want it displayed on your Full HD TV set here is what you do:
Download the HD Profiles from http://forums.nexusmods.com/index.php?/topic/236895-hd-profiles-for-windows-movie-maker/. There's also a couple of useful SD sizes there as well. Save them somewhere you can easily find them.
Create your slide show in the Organizer. Obviously use appropriately sized images for HD. There's little point outputting an HD wmv file using low resolution and/or 4:3 aspect ratio images.
Save and Output your slide show.
In the output dialog ('Save As a File') scroll down to the bottom of Slide Size and select 'Browse for more ...'.
Browse to the file you downloaded in step 1 and click Open.
Click OK and your Widescreen HD .wmv file is prepared.
Here's a Gspot analysis of my test output file. As you can see it is an HD file with a 16:9, square pixel, aspect ratio.
Ta Da!
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

nealeh
You did not mention a specific Premiere Elements Elements Organizer combo for this, so for now I will address this from the version 11, not Windows Movie Maker, perspective if I need to get version specific.
.prx
The Browse for More is a well known route and does offer at least one Adobe profile for 1280 x 720 16:9. I am not sure where you came up with the lesser resolution,1024 x 768 that you mentioned. The Windows Media profiles have existed for several versions of Elements Organizer. Those Adobe ones that you do not see under Output Save As A File Movie (.wmv), can be found in the Windows 7 or 8 64 bit path
Local Disc C
Profile Files (x86)
Adobe
Elements 11 Organizer
Assets
Locale
en_US
tv_profiles
in the tv_profiles Folder are included the .prx files
.....10. 640 x 480 Enhanced Definitions
.....12. 852 x 480 Widescreen Enhanced Definition
.....14 1280 x 720 Widescreen High Definition
A homemade 1920 x 1080 16:9 30 frames per second .prx has long been sought but not that easily produced by many using with the Windows Media Encoder Editor. Apparently you have found one online, and it does get accepted into the Premiere Elements 11 Browse for More choices. And, if you do a gspot readout for the wmv output from Elements Organizer 11, it will display all the "right" properties that you hoped for and that are shown in your screenshot.
The bottom line, why bother with the wmv slideshow? If you take your original photos and size them for 1920 x 1080 16:9, use them in the Elements Organizer 11 Slideshow Editor (Crops used in preferences), use the Edit with Premiere Elements Editor command, what you get in Premiere Elements 11 is full and good in all regard. Have you tried it?
I can see your interest if this is HD going to HD (AVCHD on DVD or Blu-ray disc format on Blu-ray disc, but I do not see this for an Elements Organizer Slideshow that is going to DVD-VIDEO widescreen.
More later.
ATR

Get all roles from an organization

Hello,
i want to get all roles 'AMRoles) from an organizations. I have Portal Server 2005Q4 on a machine and Access Manager and Directory on another and i want to extract all display profiles from all roles in different files (more than 100).
I found the dpadmin command line to extract a Display Profile from a dn but, how can i get the list of roles with the amadmin command line tool ?
thanks for help.
Philippe

Hello,
I take a look, found differents xml files but : no help, no "howto", no thing very interesting.
I try this command :
/opt/SUNWam/bin/amadmin -u "cn=Directory Manager" -w ******* -e "dc=isere-savoie,dc=fr" -o /export/home/jes/test.xmland with other values in the -e parameter but always the same message :
Erreur 9 : �chec de l'op�ration : Failed to export entityDescriptor to a file.Any idea ?
any link to some help on this command other than Access Manager amadmin Command Line ?
a complement : in the debug files, I have this errors :
==> /var/opt/SUNWam/debug/amFederation <==
01/30/2008 04:40:59:324 PM CET: Thread[main,5,main]
ERROR: FSAllianceManager::getEntity entityID: dc=isere-savoie,dc=fris invalid
==> /var/opt/SUNWam/debug/amMeta <==
01/30/2008 04:40:59:510 PM CET: Thread[main,5,main]
ERROR: Failed to export entityDescriptor to a file
--------------------------------------Got Federation Exception
Message: Invalid Provider ID.
        at com.sun.identity.federation.alliance.FSAllianceManager.getEntity(FSAllianceManager.java:1815)
        at com.sun.identity.liberty.ws.meta.LibertyMetaHandler.SMToMeta(LibertyMetaHandler.java:109)
        at com.iplanet.am.admin.cli.Main.outputLibertyData(Main.java:889)
        at com.iplanet.am.admin.cli.Main.runCommand(Main.java:730)
        at com.iplanet.am.admin.cli.Main.main(Main.java:1124)thanks
Philippe
Edited by: beutin on Jan 30, 2008 4:43 PM

How to run a BI-Publisher report from the Appworx enterprise batch sheduler

We have a BI-Publisher report that needs to be executed staight after a batch job. Does anyone know how to execute a report from the Appworx enterprise batch scheduler?
Thanks.

I'm not familiar with AppWorx, but we use Autosys. We created a PL/SQL wrapper that calls FND_REQUEST.ADD_LAYOUT and FND_REQUEST.SUBMIT_REQUEST to submit XDOREPPB. For any report that needs to be scheduled via Autosys, the wrapper program is executed with the appropriate parameters.
Hope this helps.

Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33

"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz

Flipping from PSE8 organizer (or batch)

Similar Messages

Maybe you are looking for