Floating logo and pages off centre?

Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

hi,
try giving left and right margin : auto ;
to ur main div tag. not like 30*px and any value,,and u will see ur page wil be in center in all browser. and
have u used external css,,? if not, we have to reset all tags first b4 proceeding further work , in html
hope i was rite
best
whitsunday lad wrote:
Hi,
I am a novice Dreamweaver MX user developing an asp application using the bones of an old site I had built years ago. I have designed a new logo and changed out all the pages in the old site with the new logo. I have also built some new pages and connected with new links. My box runs windows XP professional and I am using a medium size LCD TV as my monitor. (51 eyes not good) Settings are 800x600. In the page property settings in Dreamweaver MX I found it necessary to set some of the pages to Left margin: 30 Margin width: 30 so that they would display in the centre of my browser.
On my computer set up the entire logo and pages look good in the browser and all are centered, all seemed well. I then went to the local library to see how they looked. I now have logo not centered in line with the rest of the document and some of my new page/pages are right on the left margin of the browser not centered as in my set up view.
I then changed my settings to a higher resolution and found the same result as the library.
How do I get my pages all centered with the logo all in the same place? If you would like to see this problem first hand http://www.debtorstocash.com
Cheers

Similar Messages

My iphone cant turn on , it just go on apple logo and turn off again and go to logo again and turn off again

help me , my iphone 4 cant turn on .. it just go to apple logo and turn off again .. it is done repeatedly

you must get your phone to DFU and restore by using the iTunes

HT201559 I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to insert company logo and page number on every page except the first page?

Hi, I am creating a newspaper and I've inserted the page number and company name on every page using the master page (you know the basic method).
Problem is I don't want the page number or the logo to appear on the first page, how can I do this?
Or will I have to copy and paste it on each page instead...? I'd rather not.
I'd appreciate any help I can get.
P.S. I'm using CS5 and obviously I'm talking about InDesign.

Make another master and apply it to the first page.
Take care, Mike

Footnoting - Logos Bible Software and Pages

Hey all. I am currently using Pages '09 and the new Logos Bible Software for mac.
In Windows I used to be able to just copy paste to a pages document and it would create the footnote for me! I can't figure out how to set this up in Pages.
Are any of you using Logos and Pages?
Do you know how to get the footnoting to interact better?

I've been having the same problem as well. I contacted Logos about this because this was the main reason I went with them. Below is a summary of the email I received...
I'm afraid that Pages does not support our footnoting capabilities. There is a open source text editor called OpenOffice that you can download for free and it does support our footnotes....
...the problem with this footnotes is with Pages. Libronix includes the data for the footnotes but Pages is not designed to use the extra data to create footnotes. Unless Pages comes out with an update that includes allowing footnote data I doubt we will be able to make this feature work for Pages.
I was pretty bummed to hear this but that's the way it is I guess.

HT201412 Hello I made a update on my ipod to the ios 6 and its just been showing the apple logo then goig off and repeating that any ideas or help please?

I made a update to the ios 6 and now its just showing the apple logo and going off to black and repeating tat any help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Printing with Border off centre

When i try to print a 4x6 print with a border the print module is putting the following minimum margins: L 0.35 R 0.32 T 0.28 B 0.53 so the rpint is off centre. I can't make these any smaller and making them all 0.53 looks to big. Any ideas it doesn't put the image centrally?
I tried resizing the image in PSE5 editor to exacly 4x6 but made no difference.

I tried borderless and it does set the margins to zero. However when I put in 0.2 cm and print it doesn't come out quite right. Looks fine on the LR preview. Cell dimension in LR are correct at 14.84x9.76 but actual print is 14.6 x 9.8 and sightly off centre (L 0.15 R 0.25).
This is much better than I was getting as had a look in the Canon print properties and under Page Layout in the Borderless section there is a slider "Amount of Extension". I set this to the left so the minimum and got a big improvement.
That's close enough to be usable at least tks Jao

Page up and page down = pages go off centre

A very basic question: when flipping through the pages of a book I've laid out, it would be nice if using the page up or down keys moved to the next page and centred them. Instead, however, the pages are moved knocked out of centre each time. How to get around this?
This happens at all sizings except for 100%. The page size is closest at 127% to the actual physical printed page. There should be a way to set this as the defaul page size. At 127% the up and down keys result in the page dancing bout the screen going off centre both horizontally and vertically. At 100% the centreing is fine verticallz as you flip through the pages, but depending on whether its an odd or even page, the pages will still jump around horizontally. I'm working in spreads.
Thank you.

... and Shift-PageUp/PageDown is the default for moving through the document in discreet pages.
But if your like me and prefer PageUp and PageDown to move a full page, you can edit the shortcuts to work that way.

I was using my pad to work on keynote, and pages, I took off for a few days and all my files are un accessible. How do I fix this?

I was using my I pad for work and school using keynote and pages I took off for a holiday and now my doc are not available on my pad. How did this happen and how do I fix this?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

My pages load off centre when using Firefox

for the past 2 months every page I open is off centre and I have to correct it before i can use it, including the start page, I click on the lower right hand corner and move it back and forth and the page centres, Its just annoying. Hope you can help
Thank
Guy

This issue can be caused by the Babylon Toolbar extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Print problem - prints fine in photoshop and windows but direct from illustrator is off centre when printed.

when printing a full page image from illustrator the print is off centre and does not print the image in line with the paper. the same image prints just fine in photoshop and as a jpeg from windows own program. the positioning is zeroed in the dialouge box and the preview image shows how it should print, but it does not print as shown. please help.

clarke,
What happens if you Save a Copy as PDF, then print from Acrobat or Reader?
If that helps, you may consider trying to (find and) use a PostScript (emulatin) printer driver to your printer, if possible.

My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

Here are Apple Steps: http://support.apple.com/kb/HT1808

I have a mac book pro still running mountain lion.I haven't powered it on in a few months. now when i try to turn it on all i get is the apple logo and the progress bar after a few mins. of trying to load my laptop just turns off.can anyone help me

I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks

I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

Floating logo and pages off centre?

Similar Messages

Maybe you are looking for