Flow chart of buielding abap program

hi
i need a flow chart how is the best way to buield abap program ?
step by step for simple genral program.
Regards

1 .Call Transaction 'SE38' to create a new program.
To proceed in an SAP 4.x system you must be registered as a Developer. It must be entered once when you create your first program.
2.Program attributes:
Type: 1
Application: S
Choose a meaningful title
(Save)
Choose Development Class &TMP or press Button 'Local object'
3.Editthe source code.
Position the cursor in a line number cell. Press F1 for the help of editor line commands.
report zhello.
write: / 'hello world'.
(Save, Generate, Execute)
<b>Reward points if usefull</b>

Similar Messages

Flow chart for Checking Abap Programming standards

hey im developing a tool for checking some standards to be maintained in abap coding. for that how to develop a flow chart initialy.
thanks in advance,
suresh babu aluri.

hi praveen,
how can i go to Microsoft-Visio flowchart. give me full details or even the navigation part for accessing it.
thanks in advance,
suresh babu aluri.

Issue regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

How to generate Flow Chart from Program Source Code easily and automatically.

It is very crucial to have a clear mind when faced with abstract codes for software engineers and program developers. As always, the programmers have had an overall structure in your mind and then process the design with source code. The structure can somehow be so complex that it becomes hard to cope with gradually. More often than not, you will get stuck when you process to some extent. However, codes can’t speak and present themselves in a straightforward way. You are eager to find out a straightforward layout to transfer those abstract codes to visible flowchart, aren’t you? Do you know there's code to flowchart software tools online? This tool can help you make a flowchart from source code automatically, here I will introduce you a great code to flowchart converter software.
Code Flowchart Creator is professional source code to flowchart software tool. This software is designed for programmers or document writers, and its main function is to generate flow chart from source code such as C, C++, VC++ (Visual C++ .NET) and Delphi (Object Pascal) programming files. It helps users to understand complex program structures by visual diagrams. When users are editing the source code, it can make a flowchart or NS chart according to that code, the source code will be analyzed to build a visible flowchart that can help users get familiar with the process of the program. The created flowchart can be exported as Visio/Word/BMP files. And it works well on all Windows OS, especially on Windows 7.
Below is simple guide on how to use the Flowchart Converter. Step 1: Free download the setup file on official website: http://www.flowchart-creator.com Step 2: Install it on PC and startup the Flowchart Creator Step 3: Open a source code file and it will automatically generate the Flow Chart on right Window. Actually, the Flowchart Creator is very easy to use even without any experience. If you want to get more details and advanced setting, please visit the website to get tech info and support. Moreover, it also provides users with browsing and navigation functions. Those functions will facilitate the process of programmer and come to great help to both senior and junior programmers. The generated flowchart can be used to review source code. It will help examine the whole process of a program and check where errors exist when users are verifying source codes. You will never be worried about the complex program structure with the powerful code to flowchart creator tool.

Dear Chuck,
I have used Google and other search engines intensively since years. What I need (and this is why I've opened this thread actually) is a suggestion for a product from someone that has already used it. That could also save me time instead of searching, installing, trying, and eventually deinstalling at random. After all, the forum should allow to exchange knowledge and experience with people having similar interests.

HOW TO creat BAR CHART using ABAP Programming

DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJ

On earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
           DATANAME(15),
           QUANTITY1 TYPE I,
           QUANTITY2 TYPE I,
           QUANTITY3 TYPE I,
      END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
           OPTION(20),
      END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
     EXPORTING
          COL1        = 'Jan'
          COL2        = 'Feb'
          COL3        = 'Mar'
          TITL        = 'Lumber Usage in $'
     TABLES
          DATA        = ITAB_DATA
          OPTS        = ITAB_OPTIONS
     EXCEPTIONS
          OTHERS      = 1.
[/code]
Regards,
Rich Heilman

ABAP program flow.

Hi,
whenever i write abap program, i usually maintain following program flow. is it right from performance tuning point of view?
1) include statements
2) DATABASE TABLES
3) VARIABLE DECLARATIONS
4) SELECTION-SCREEN
5) FIELD SYMBOLS
6) INITIALIZATION
7) AT SELECTION SCREEN
8) TOP OF PAGE
9) END OF PAGE
10) START OF SELECTION
11) END OF SELECTION
Please advise
Regards,
Santosh

Hello,
Just to add to Kathick's explanation. ABAP is an event-driven programming language. The general flow of an ABAP program is controlled by events.
It is a good -practice to code event processing blocks in the order in which they will be triggered during execution. However, they do not have to be coded in a sequential order.
This is the first thing i learnt in ABAP basics class )
BR,
Suhas

Flow Chart Programming

Hi
Is flow chart programming is possible through java?
Means through programming we need to generate a flow chart.
Searched net but all are separate installers, we need to install and then we can drag and drop all these..
Its easy with the installers.. but we cannt include with our application.
But here the requirement is something like we need to include this with applications..
So any jar files or any other way.. through which we can include the files in application and able to generate flow chart..!!
Deepak

Modi wrote:
ya for flow chart programming u need to download +*{color:#ff6600}jfreechart.jar{color}*+ and *+{color:#ff6600}jcommon-1.0.9.jar{color}+* filesAFAIK, JFreeChart does not support flow charts. Flow charts are conceptually quite different from JFreeChart's feature set.

Abap program standards

hi all,
     i need to design flow chart for checking for a program whether it satifies the abap coding standards or not. who to do it. if possible send me graphical representations [flow charts] or links to find programming standards.
some of my requirements in that folw chart are
1. how to recognize a blank space in a given program,
2. how to recognize a comment,
3. how to check wheteher a keyword is used or not,
4. how to identify the ' :' symbol
thanks & regards,
suresh babu aluri.

plz go through this documementaion,
i think its helpful.
ABAP Programming StandardsContents
1.     Objective     5
2.     Naming Conventions     5
2.1     Codes for naming conventions     5
2.1.1     Module Codes     5
2.1.2     Free text     6
2.2     Naming Convention of Development Objects     6
2.2.1     Package     6
2.2.2     Executable Program     6
2.2.3     BSP Application     7
2.2.4     Logical Database     8
2.2.5     SAP Scripts /Smartforms     9
2.2.6     Idocs     9
2.2.7     Transaction Code     10
2.2.8     Function Groups     10
2.2.9     Dictionary Objects     11
2.2.10     Message Class     11
2.2.11     Enhancement Projects (User Exits)     11
2.2.12     LSMW Objects     12
2.2.13     Classes     12
2.2.14     BOR Object Types     13
2.2.15     Screen / Transaction Variants     13
2.2.16     Area Menu     13
2.3     Naming of Sub-Objects     13
2.3.1     Program Sub-Objects     13
2.3.2     SAP Script /Smartform sub-objects     14
3.     General Programming Guidelines     14
3.1     Modification Logs     14
3.2     Program Organization     15
3.2.1     Executable Programs     15
3.2.2     Dialog Programs     15
3.3     Package     15
3.3.1     Adding Components to existing objects     15
3.3.2     Creation of New Objects     15
3.4     Program Messages     15
3.4.1     Adding Messages to existing landscapes     15
3.4.2     Creation of New Objects     16
3.5     Dictionary Objects     16
4.     Structure of ABAP Programs     16
4.1     Type     16
4.2     Status     18
4.3     Authority Check     18
4.4     Program Structure     19
4.4.1     Declaration data for global data, classes and selection screens     19
4.4.2     Container for Processing Blocks     19
4.4.3     Calling Processing Blocks     20
4.5     Screen Flow Logic (Dialog Programs)     20
4.5.1     Place the AT EXIT COMMAND at the beginning of the flow logic.     20
4.5.2     Use FIELD and CHAIN statements to keep fields in error open for correction.     20
4.6     Main Program     20
4.6.1     Events     20
5.     General Coding Standards     21
5.1     One command per line     21
5.2     Indented Source Code     21
5.3     Extended Syntax Check     21
5.4     Reusability and Modularity     21
5.5     Text Handling     21
5.6     Usage of System Variables     22
5.7     Chaining Statements     22
5.8     Common Routines     22
5.9     Dialog Messages     22
5.10     Function Keys     23
5.11     Enqueuing and Dequeuing Data Objects     23
5.12     Error Handling (SY-SUBRC)     23
5.13     General Conventions and Hints     24
5.14     Parameters in Sub-Routines     24
6.     Performance Standards     25
6.1     General Tips on Performance Tuning     25
6.1.1     Avoid Redundant code     25
6.1.2     Subroutine Usage     25
6.1.3     Case vs. Nested IF     25
6.1.4     Using the MOVE Statement     25
6.1.5     SELECT Queries     25
6.1.6     Using the READ statement     27
6.1.7     Hashed table     27
6.1.8     Transporting     28
6.1.9     Using LDB     28
6.1.10     Append Lines of     28
6.1.11     Use WHILE     28
6.1.12     DELETE <itab> WHERE     28
6.1.13     Using WHERE clause in LOOP.ENDLOOP     28
1.     Objective
The objective of this document is to describe general programming guidelines, methodologies, Naming conventions and performance guidelines for all the programs developed for SAP Project.
2.     Naming Conventions
This chapter describes the naming conventions to be followed for naming the programming objects for SAP project.
2.1      Codes for naming conventions
The variable portion of naming convention is given with Code ID given in angle brackets(<>). Use the following tables for replacing code IDs with codes in the object naming.
2.1.1     Module Codes
Code ID: mm
Code     Description
FI     Finance
CO     Controlling Module
MM     Materials Management
PP      Production Planning
SD     Sales & Distribution
QM      Quality Management
PM     Plant Maintenance
IM     Inventory Management
WM     Warehouse Management
BC     Basis Module
BW     Business Warehouse
WF     Workflows (Master Data Management)
HR     Human Resources
EBP     EBP
PS     Project Systems
PCP     Synpro: Product Costing
PAP     Synpro: COPA
DP     APO : Demand Planning
SP     APO : Supply Network Planning
DS      APO : Production Planning & Detailed Scheduling
AT     APO : Global ATP
TP     APO : Transportation Planning/Vehicle Scheduling
CI     Core Interface
LC     Live Cache
2.1.2     Free text
Code ID: ffff
Developer should replace ffff with meaningful text. The text can be multiple words separated by underscore.
2.2     Naming Convention of Development Objects
2.2.1     Package
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with Module codes given in section 2.1.1 above.
2.     Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3.     The maximum permissible length for development class is 30 characters
Examples:
Dev. Class     Description
ZFI_AR     FI: Account Receivables
ZCO_CCA     CO: Cost Center Accounting
2.2.2     Executable Program
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
3.     The maximum permissible length for program name is 30 characters. However, the name should be restricted to 25 characters to accommodate appropriate Include naming as described in 2.2.2.
Examples:
Program Name     Description
ZFI_VAT_RET     FI: Report for VAT Return
ZMM_AUTO_GR     MM: Automated Goods Receipt
ZSD_XX_STCK_SHORTAGE     SD: Stock shortage report for stock allocation
2.2.2.1     Includes for executable programs
Naming Convention: Z<mm>_<ffff>_<Inn>.
Notes:
1.     All includes of executable program will be prefixed by Z, followed by the same program name as described in 2.2.2 above.
2.     Replace <Inn> with include type and sequence number. Use the following table for includes.
Include Type ID     Description
TOP     Top Include.
Fnn     Subroutine pool (Forms)
Inn     PAI Modules
Onn     PBO Modules
Xnn     Other Includes
The maximum permissible length for Include name is 30 characters.
Examples:
Include Name     Main Program Name     Description
ZFI_VAT_RET_TOP     ZFI_VAT_RET     FI: Report for VAT Return Top Include
ZFI_VAT_RET_F01     ZFI_VAT_RET     FI: Report for VAT Return Forms
ZMM_AUTO_GR_TOP     ZMM_FR_AUTO_GR     MM: Automated Goods Receipt Top include
ZMM_AUTO_GR_F01     ZMM_FR_AUTO_GR     MM: Automated Goods Receipt Forms
2.2.3     BSP Application
2.2.3.1     Main Application
Naming Convention: BSP Applications shall follow the same Naming Convention as Executable Programs i.e. Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
2.2.3.2     Pages & Controllers
Naming Convention: <ffff>
Notes:
1.     Replace <ffff> with meaningful text, that adequately describes the function of the page/controller
2.2.3.3     Theme
Naming Convention: Z_<ffff>.
Notes:
1.     Replace <ffff> with meaningful text
2.2.3.4     Mime Objects:
Naming Convention: <ffff>
1.     A MIME Object can be logo for the company.
2.     Replace <ffff> with meaningful text, that adequately describes the function of the MIME objects
2.2.3.5     Controller and Handler Classes:
See section Classes (Section 2.2.133)
2.2.3.6     BSP Extension
Naming Convention: Z_<ffff>
Notes:
1.     Replace <ffff> with meaningful text
2.2.3.7     BSP Layout elements id
Label:     lb_fffff
Input field:     if_fffff
Button:     b_fffff
Text Edit:     te_fffff
Text View:     tv_fffff
Radio button Group:     rbg_fffff
Radio button:     rb_fffff
Check Box Group:     cbg_fffff
Check Box     cb_fffff
Tray     tr_fffff
Tabstrip     ts_fffff
Tableview      tab_fffff
1. Replace <fffff> with meaningful text
2.2.4     Logical Database
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text
3.     The maximum permissible length for LDB name is 20 characters. However, the name should be restricted to 15 characters to accommodate appropriate Include naming
4.     LDB Program and LDB Program Includes shall follow the naming convention Auto-Generated by SAP
2.2.5     SAP Scripts /Smartforms
Naming Convention: ZF<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
Examples:
Form Name     Description
ZFFI_EMP_CONF     Employee Confirmation Letter
ZFFI_ANN_TO     Annual Turnover Letter To Customers and Vendors
2.2.6     Idocs
2.2.6.1     Idoc Types
Basic Type :
Naming Convention : ZB<FFFF>NN
Notes:
1.Replace <NN> with sequence number.
3.     Replace <ffff> with meaningful text.
Extension Type : ZX<Basic type name>_NN
Notes:
1.     Replace <NN> with sequence number .
2.2.6.2     Message Types
Naming Convention : ZM<mm><ffff>.
Notes :
1.   Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text .
2.2.6.3      Process Code
Naming Convention : Z<ffff>.
Notes :
1.     Replace <ffff> with meaningful text ..
2.2.6.4     IDOC Segments
Naming Convention : Z1<ffff>.
Notes :
1.Replace <ffff> with meaningful text as illustrated in examples below.
2.2.7     Transaction Code
Notes:
1.     The tcode name is provided by SAP TIN The Developer must write a mail to SAP Tin asking for the T-Code name with a filled form.
The form can be found at :
2.2.8     Function Groups
Naming Convention: Z<mm><ffff>
Notes:
1.     Replace <mm> with relevant module code as given above
2.     Replace <ffff> with meaningful text.
2.2.8.1     Function Group Include Programs
Naming Convention: LZ<Function Group><Inn>.
Notes:
1.     All includes of Function Group program will be prefixed by LZ, followed by the Function Group name
2.     Replace <Inn> with include type and sequence number. Use the values from the table given in 2.2.2.1
Examples:
Include Name     Function Group Name     Description
SAPLZMMPURCHASING     ZMMPURCHASING     F.Group-Purchasing: Main Program
LZMMPURCHASINGO01     ZMMPURCHASING     F.Group-Purchasing: PBO
LZMMPURCHASINGI01     ZMMPURCHASING     F.Group-Purchasing: PAI
LZMMPURCHASINGF01     ZMMPURCHASING     F.Group-Purchasing: Forms
LZMMPURCHASINGTOP     ZMMPURCHASING     F.Group-Purchasing: Data Declarations
2.2.8.2     Function Modules
2.2.8.2.1     Normal Function Modules
Convention: Z_<mm>_<ffff>.
Notes:
1.     Replace <mm> with relevant module code as given above.
2.     Replace <ffff> with meaningful text.
2.2.8.2.2     IDOC Function Modules
Convention: Z_IDOC_<mode>_<msg type>.
Notes:
1.     Replace <mode> with INPUT or OUTPUT depending on whether the function processes incoming or outgoing IDOC.
2.     Replace <msg type> with the IDOC message type.
2.2.9     Dictionary Objects
Tables:      Z<mm><ffff>
Structures:      ZS<mm><ffff>
Views:      ZV<mm><ffff>
Data Element:      ZDE<mm><ffff>
Domain:      ZDO<mm><ffff>
Table Type:      ZTT<mm><ffff>
Type Group:      Z<ffff>
Search Help:      ZSH<mm><ffff>
Lock Object:      EZ<mm><ffff>
Notes:
1.     Replace <mm> with module code given above.
2.     Replace <ffff> with meaningful text.
2.2.10     Message Class
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with Module codes given in section 2.1.1 above.
2.     Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3.     The maximum permissible length for development class is 30 characters
Examples:
Msg. Class     Description
ZFI_AR     FI: Account Receivables
ZCO_CCA     CO: Cost Center Accounting
2.2.11     Enhancement Projects (User Exits)
Convention: Z<XX><nn>.
Notes:
1.     XX is the application area code e.g. for sales it is SD etc.
2.     'nn' is one up number for one application area. It starts with 001.
3.     Maximum length of the Project name is 8.
Example: The name of the SD enhancement project can be ZSD001.
2.2.12     LSMW Objects
2.2.12.1     Project
Naming Convention: ZM_<ffff>.
Notes:
1.     1.     Replace <ffff> with meaningful text
2.     The maximum permissible length for Project name is 16 characters. But please limit it to 12.
Example : ZM_VENDOR
2.2.12.2     SubProject
Naming Convention: ZM_<ffff>_<n>.
Notes:
     Suffix Project name with a running sequence no.
Example : ZM_VENDOR_1
2.2.12.3     Object
Naming Convention: ZM_<ffff>_<n><n>.
Notes:
     Suffix Subproject name with a running sequence no.
Example : ZM_VENDOR_11
2.2.13     Classes
Naming Convention: ZCL_[IM/DF/BSPCO/BSPHN/BADI]_<ffff>.
1.     IM: Implementation Class;
DF: Definition Class
BSPCO: BSP Controller class
BSPHN: BSP Handler class
BADI : BADI implementation
2.     Replace <ffff> with meaningful text: In case of Implementation classes, it should preferably be the same as that of the Definition Class
3.     Example:
IMPLEMENTATION Class: ZCL_IM_REBATE_SETTL
DEFINITION: ZCL_DF_REBATE_SETTL
2.2.14     BOR Object Types
Object     Convention     Example
Supertype     Z<ffff>     ZLVAPPL
SubType     Z<SuperType><nn>     ZZLVAPPL01
Program     <Subtype>     ZZLVAPPL01
1.     Replace <nn> with a running 2 digit serial Number
2.     Replace <ffff> with meaningful text
2.2.15     Screen / Transaction Variants
Naming Convention: <tcode>_<ffff>
Where:
1.     Replace <tcode> with the t-code that will be assigned to this Variant
2.     Replace ffff with a meaningful text
E.g.:
For an SE16 variant for table KONA that will be used by T-Code Z_CH_SD_001:
Z_CH_SD_001_KONA
2.2.16     Area Menu
Naming Convention: Z<mm>_<Main Menu>_<Sub Menu><ffff>
Where:
1.     Replace <mm> with the Module code
2.     Followed by the hierarchical position of the immediate parent of this Area Menu
3.     Followed by a Meaningful text for this Menu
E.g.:
ZSD
ZSD_TAB
ZSD_TAB_VIEW
ZSD_TAB_UPDT
Notes:
1.     Clusters of Transactions should be introduced as Sub-Menus rather than as Folders
2.     As a gradual process, the current Clusters that exist as Folders should also be replaced with Sub-Menus
2.3     Naming of Sub-Objects
2.3.1     Program Sub-Objects
Naming of all the internal components of a program will be consistent across the project.
Naming Convention: <Prefix>ffff.
Notes:
1.     Replace <Prefix> with the component prefix values given in the table below.
Program Component     Prefixed by
Program Constants     C_
Global Variables     W_
Types Definition     T_
Global Structures     WA_
Global Internal Tables     I_
Select-Options     SO_
Parameters     PO_
Table Type     TT_
Field Symbols     FS_
Ranges     R_
Local Constants     LC_
Local Variables     L_
Local Static Variables     LS_
Local Internal Tables     LI_
Local Work Area     LWA_
Local Range     LR_
Field Groups     FG_
Container      CO_
Macro     MA_
Important: The Same sequence as above must be followed in the Data declaration part of all the ABAP/4 programs.
2.3.2     SAP Script /Smartform sub-objects
Naming of all the internal components of a SAPScript/SmartForm shall follow the same convention as for Programs (2.2.2), with the addition of the Field Label on the FRS. E.g. if the FRS has labeled a field for Sales Order Number as Field 27 on the Layout, the variable name should be W_27_VBELN.
3.     General Programming Guidelines
3.1     Modification Logs
At the top of every ABAP Object Modified by a Developer, there should be a Modification Log Every Line Created/Changed by the developer should be Identifiable by the TR Number.
ABAP Patterns: Following Patterns should be used for Uniform ModLogs:
Nature of Change     Pattern to Use
New Development     ZZNEWPROG
In-Line Logs     ZZLINE
Modification Logs at the Top of Object     ZZMODLOG
3.2     Program Organization
All the programs will be organized as described below.
3.2.1     Executable Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
3.2.2     Dialog Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
PBO Include: Include for PBO Modules
PAI Include: Include for PAI Modules
3.3     Package
All the related objects within a sub-module of SAP will be developed under a single Package.
3.3.1     Adding Components to existing objects
When adding new workbench components to existing Objects, the same Package will be used as has been used for the existing Components
3.3.2     Creation of New Objects
When creating new Objects or new Sub-lanscapes, Packages used should have the Naming convention as in Section 2 Above
3.4     Program Messages
All the messages within a sub-module of SAP will be grouped under a single Message Class.
3.4.1     Adding Messages to existing landscapes
When adding new messages for existing Objects, the same Message Class will be used as has been used for the existing Objects
3.4.2     Creation of New Objects
When creating new Objects or new Sub-landscapes, Message classes used should have the Naming convention as in Section 2 Above
3.5     Dictionary Objects
Whenever you create a Z table in system always include MANDT field as the first field, except when the table contains client independent data. Also create the table with attribute Data Class as USER.
4.     Structure of ABAP Programs
4.1     Type
     When an ABAP program is run, its processing blocks are called. ABAP programs are controlled from outside the program itself by the processors in the current work process. For the purposes of program flow, we can summarize the screen processor and ABAP processor into the ABAP runtime environment. The runtime environment controls screens and ABAP processing blocks. It contains a range of special control patterns that call screens and processing blocks in certain orders. These sections are also called processors. When a ABAP program is run, the control passes between various processors.
     In the R/3 System, there are various types of ABAP program. The program type determines the basic technical attributes of the program, and must be set when created. The main difference between the different program types is the way in which the runtime environment calls its processing blocks.
     When an application program is run, it must at least call the first processing block from outside the program, that is, from the runtime environment. This processing block can then either call further processing blocks or return control to the runtime environment. When an ABAP program is started, the runtime environment starts a processor (dependent on the program type), which calls the first ABAP processing block.
     The following program types are relevant to application programming:
Type 1
     Type 1 programs have the important characteristic that they do not have to be controlled using user-defined screens. Instead, they are controlled by the runtime environment, which calls a series of processing blocks (and selection screens and lists where necessary) in a fixed sequence. User actions on screens can then trigger further processing blocks.
Type M
     The most important technical attribute of a type M program is that it can only be controlled using screen flow logic and run via a transaction code which is linked to the program and one of its screens (initial screen).
     ABAP programs with type M contain the dialog modules belonging to the various screens. They are therefore known as module pools.
Type F
     Type F programs are containers for function modules, and cannot be started using a transaction code or by entering their name directly.
     Type F programs are known as function groups. Function modules may only be programmed in function groups. The Function Builder is a tool in the ABAP Workbench that is used to create function groups and function modules. Apart from function modules, function groups can contain global data declarations and subroutines. These are visible to all function modules in the group. They can also contain event blocks for screens in function modules.
Type K
     Type K programs are containers for global classes in ABAP Objects. Type K programs are known as class definitions. The Class Builder is a tool in the ABAP Workbench that can be used to create class definitions.
Type J
     Type J programs are containers for global interface in ABAP Objects. Type J programs are known as interface definitions and are created in the Class Builder.
Type I
     Type I programs - called includes - are a means of dividing up program code into smaller, more manageable units. The coding of an include program can be inserted at any point in another ABAP program using the INCLUDE statement. There is no technical relationship between include programs and processing blocks. Includes are more suitable for logical programming units, such as data declarations, or sets of similar processing blocks. The ABAP Workbench has a mechanism for automatically dividing up module pools and function groups into include programs.
4.2     Status
P = SAP standard production program
K = Customer production program
S = System program
T = Test program
Application
     Categorize the program according to the purpose it fulfills.
4.3     Authority Check
Authority checks will be carried out as given in the respective FRSs.
4.4     Program Structure
ABAP programs are responsible for data processing within the individual dialog steps (ie. events) of an application program. This means that the program cannot be constructed as a single sequential unit, but must be divided into sections that can be assigned to the individual dialog steps. To meet this requirement, ABAP programs should have a modular structure. Each module is called a processing block. A processing block consists of a set of ABAP statements. When a program is run, effectively a series of processing blocks is called. Therefore, they should not be nested but modularized.
     Each ABAP program consists of the following two parts:
4.4.1     Declaration data for global data, classes and selection screens
     The first part of an ABAP program is the declaration part for global data, classes, and selection screens. This consists of:
     All declaration statements for global data. Global data is visible in all internal processing   blocks and should be defined using declarative statements that appear before the first processing block, in dialog modules, or in event blocks. Local data should not be declared in dialog modules or event blocks.
     All selection screen definitions.
     All local class definitions (CLASS DEFINITION statement). Local classes are part of ABAP Objects, the object-oriented extension of ABAP.
     Declaration statements which occur in procedures (methods, subroutines, function modules) form the declaration part for local data in those processing blocks. This data is only visible within the procedure in which it is declared.
4.4.2     Container for Processing Blocks
     The second part of an ABAP program contains all of the processing blocks for the program. The following types of processing blocks are allowed:
1.     Dialog modules (no local data area)
2.     Event blocks (no local data area)
3.     Procedures (methods, subroutines and function modules with their own local data area).
     Whereas dialog modules and procedures are enclosed in the ABAP keywords which define them, event blocks are introduced with event keywords and concluded implicitly by the beginning of the next processing block.
     All ABAP statements (except declarative statements in the declaration part of the program) are part of a processing block. Non-declarative ABAP statements, which occur between the declaration of global data and a processing block are automatically assigned to the START-OF-SELECTION processing block.
4.4.3     Calling Processing Blocks
     Processing blocks can be called from either the ABAP program or using ABAP commands which are themselves part of a processing block. Dialog modules and event blocks are called from outside the ABAP program. Procedures are called using ABAP statements in ABAP programs.
     Calling event blocks is different from calling other processing blocks for the following reasons:
     An event block call is triggered by an event. User actions on selection screens and lists, and the runtime environment trigger events that can be processed in ABAP programs. Define event blocks for the events that the program needs to react to (whereas a subroutine call, for example, must have a corresponding subroutine). This ensures that while an ABAP program may react to a particular event, it is not forced to do so.
4.5     Screen Flow Logic (Dialog Programs)
4.5.1     Place the AT EXIT COMMAND at the beginning of the flow logic.
Example:
PROCESS AFTER INPUT
   MODULE EXIT_1170 AT EXIT-COMMAND.
   MODULE PAINT_1170.
4.5.2     Use FIELD and CHAIN statements to keep fields in error open for correction.
Example:
   PROCESS AFTER INPUT.
   MODULE EXIT_1170 AT EXIT-COMMAND.
   CHAIN.
      FIELD BTCH1170-JOBNAME.
      FIELD BTCH1170-USERNAME.
      FIELD BTCH1170-FROM_DATE.
      FIELD BTCH1170-FROM_TIME.
      MODULE PAINT_1170.
   ENDCHAIN.
4.6     Main Program
4.6.1     Events
The Program MUST NOT be coded without the use of Proper Coding blocks
     Initializations
     Top-of-page during line-selection
     At Selection-Screen
     At Line-Selection
     At User-Command
     At Pfn
     Start-Of-Selection
     Top-Of-Page
     Get
     End-Of-Page
     End-Of-Selection
NOTE: The coding for each event should be logically split into forms (subroutines). That is to say, each event will comprise mostly of PERFORM statements.
5.     General Coding Standards
5.1     One command per line
Each ABAP/4 command consists of a sentence ending with a period. Multiple commands can be on one line; however, as a standard start each new command on a new line. This will allow for easier deleting, commenting, and debugging.
5.2     Indented Source Code
The ABAP/4 editor has a "Pretty Printer" command to indent by 2 positions specific lines of code and add subroutine comments. Event keywords are typically not indented.
5.3     Extended Syntax Check
Extended Program Check (EPC) to be done on each object to make sure the code is Syntactically correct. There should be no Error/warning messages in the code.
5.4     Reusability and Modularity
If a block of code is executed more than once, it should be placed in a subroutine at the bottom of the code. This makes the code more readable, requires less indentation, and is easier to debug since the debugger can jump through an entire subroutine via a PF key. Also, when possible parameters should be passed to and from subroutines to make the purpose easier to understand and reduce the need for global variables. Always document the purpose of each parameter.
5.5     Text Handling
Text elements must be used to display any text messages.
5.6     Usage of System Variables
The system variables should be used wherever possible. The SY-SUBRC is to be checked after any function call, selection operation, etc.
5.7     Chaining Statements
     Consecutive sentences with an identical beginning shall be combined into a chained statement.
Example:
Instead of the statements
MOVE SY-MANDT TO D00001-MANDT.
MOVE SY-LANGU TO D00001-SPRAS.
A chained statement shall be used
MOVE:
             SY-MANDT TO D00001-MANDT,
             SY-LANGU TO D00001-SPRAS,
             SY-UNAME TO D00001-BNAME.
5.8     Common Routines
     Standard sub-routines should be implemented as FUNCTION's rather than a FORM (ie. SUBROUTINE). A FUNCTION is easier to maintain and can be easily tested without a calling program. Standard SAP function modules are also available and the function library should be used to check if function modules already exist for a function that needs to be performed i.e.POPUP_TO_CONFIRM_LOSS_OF_DATA etc.
     Includes can also be created for re-usable or common code e.g. common data declaration statements.
5.9     Dialog Messages
Dialogue messages are stored in table T100. Programmers shall check to see if an appropriate message exists before adding a new message. Programs shall use the message-id which corresponds to the SAP module that the program most relates to.
5.10     Function Keys
PF-keys should be programmed to execute functions where required. SAP Standard function keys should be used where appropriate. The most commonly used buttons should be displayed as pushbuttons in the application toolbar.
5.11     Enqueuing and Dequeuing Data Objects
     All database objects being processed by a program, for purposes other than for display, shall be enqueued before such processing is executed. If the enqueue is unsuccessful, then a message shall be returned stating why the enqueue was unsuccessful.
     Enqueue and Dequeue objects should be created via the data dictionary.
5.12     Error Handling (SY-SUBRC)
     Return codes shall always be checked immediately after an event which returns a code.
Eg. Function calls, Select statements, Updates etc.
     The value of SY-SUBRC is 0 when successful and generally produces a value of 4 when unsuccessful (there are a few exceptions).
Therefore, rather check SY-SUBRC with:
           IF SY-SUBRC <> 0
than with
         IF SY-SUBRC = 4 (which is redundant and makes the system do a double check)
     Error messages displayed to the user must be clear and descriptive.
     Remember to group related / dependant steps together and to Rollback all changes for steps in that group should any one of them fail, thus maintaining the integrity of the system.
     Check whether an Error Log, (file), must be produced by your program and if so check on the format of the file.
     If any Error Logging is done to a custom table in the database then make sure this table is maintained and monitored correctly. (Dev. Note)
     Transaction SE91 provides the facility to create and utilize messages in their appropriate message class. Elaborate on the message if necessary, using the long text documentation for that message number.
5.13     General Conventions and Hints
     There should be NO hard coding of values in programs easy maintainability
     For amounts, use the CURRENCY command in write statements to automatically convert fields into their correct decimal format. The currency specified in the write statement is treated as a key for the table TCURX. If no entry exists for the currency specified, the system assumes two decimal places.
     For quantities, use the UNIT command in write statements to automatically convert fields into their correct decimal format. The contents of the unit specified are used on table T006. If no entry exists for the unit specified, the formatting has no effect.
     Use the LIKE statement as often as possible to declare DATA variables instead of an explicit TYPE declarations.
     Try to use the INCLUDE statement with standard SAP structures and tables for your structures and internal tables where possible. If you use the include statement to include other program components in your code then document what those components are, what they do and how to use them.
     Try to make use of standard SAP Function Modules wherever possible rather than building your own. Use the pull down functionality in transaction SE37 to find suitable standard function modules.
     Make use of the SAP PATTERN tool to automatically insert the standard code for:
     CALL FUNCTION
     MESSAGE ID
     SELECT*FROM
     PERFORM
     AUTHORITY-CHECK
     WRITE
     CASE
     CALL DIALOG
     The standard date format to use is DD/MM/YYYY. (Dev. Note)
The standard time format to use is HH:MM:SS.
5.14     Parameters in Sub-Routines
Naming convention for Parameters in subroutine is P_
6.     Performance Standards
6.1     General Tips on Performance Tuning
6.1.1     Avoid Redundant code
Avoid leaving "dead" code in the program. Comment out variables that are not referenced and code that is not executed. To analyze the program, use the Program Analysis function in SE38 -> Utilities -> Program Analysis.
6.1.2     Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called.
Example:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
6.1.3     Case vs. Nested IF
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
6.1.4     Using the MOVE Statement
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
6.1.5     SELECT Queries
The performance of any ABAP program mainly depends on the ABAP Queries used in it. More optimum the queries , better the performance. Take care of the points mentioned nin the following sections while writing any ABAP queries.
6.1.5.1     Using all the keys in SELECT statement
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. The SELECT * command is to be avoided everywhere.
6.1.5.2     Fetching Single Record
If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If all the keys are not available, we should use SELECT UPTO 1 ROWS if we are interested only in the first record.
6.1.5.3     Avoid SELECT-ENDSELECT
Selecting data into an internal table using an array fetch versus a SELECT-ENDELECT loop will give at least a 2x performance improvement. After the data has been put into the internal data, then row-level processing can be done.
Example:
select ... from table <..>
           into <itab>
           where ...
loop at <itab>
<do the row-level processing here>
endloop.
6.1.5.4     Using Indexs
Use indexes wherever possible. Tune the Query so that optimum Indexing will happen.
6.1.5.5     Provide all the keys
Give as many keys as possible in the WHERE clause to optimize the database fetching. Use the Index fields in the first position to optimize performance.
6.1.5.6     Avoid INTO CORRESPONDING
Avoid using INTO CORESPONDING FIELDS of Table. Instead, explicitly mention the fields. Else, The Table Fields should be in the same sequence as the selection
6.1.5.7     SELECT statement inside LOOP
Do not write SELECT statements inside the loop. Instead, use the FOR ALL ENTRIES Command
Before using FOR ALL ENTRIES command, check that the
1.     Corresponding Internal table is not empty. If the Internal table is empty, the statement will select ALL the entries in the Database
2.     The Internal table is sorted by the Filed used in the Where Clause: This makes selection faster
6.1.5.8     Nested SELECT statement
Avoid Using nested SELECT statements. Instead, make use of different internal tables to fetch the data, and Use Nested LOOPS to read them.
6.1.5.9     Select Distinct
Whenever its possible avoid SELECT DISTINCT, instead select data into internal table, sort and use DELETE ADJACENT DUPLICATES
6.1.5.10     Use of OR in Where Clause
Do not use OR when selecting data from DB table using an index because The optimizer generally stops if the WHERE condition contains an OR expression.
e.g.
Instead of
     SELECT * FROM spfli WHERE carrid = LH
                               AND (cityfrom = FRANKFURT OR
             city from = NEWYORK)
Use
     SELECT * FROM spfli WHERE (carrid = LH AND cityfrom = FRANKFURT)
                                  OR (carrid = LH AND cityfrom = NEWYORK).
6.1.5.11     Order By
ORDER BY will Bypass buffer. So, performance will decrease. If you want to sort data, it is efficient to SORT them in INTERNAL TABLE rather than using ORDER BY. Only use an ORDER BY in your SELECT if the order matches the index, which should be used.
6.1.6     Using the READ statement
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. The table needs to be sorted by the Key fields and the command READ TABLE WITH KEY BINARY SEARCH is to be used.
6.1.7     Hashed table
If the number of entries in the Internal Table is high then use Hashed Table with Keys to access the table.
6.1.8     Transporting
With READ or MODIFY Statements use TRANSPORTING
6.1.9     Using LDB
In order to improve performance in case of an LDB, individual tables can be excluded from selection. Under the section Table Selection in the Documentation of LDB the fields with proper description has been given those fields can be set in the application report at the time of INITIALIZATION or at the START OF SELECTION. This can enhance the performance.
6.1.10     Append Lines of
Whenever it is possible use APPEND LINES OF to append the internal Tables instead of using loop and then APPEND Statement.
6.1.11     Use WHILE
Use WHILE instead of a DO+EXIT-construction, as WHILE is easier to understand and faster to execute
6.1.12     DELETE <itab> WHERE
Use DELETE <itab> WHEREfor deleting records from an internal table.
e.g.
Instead of
LOOP AT <itab> WHERE <field> = 0001
     DELETE <itab>.
ENDLOOP.
Use
DELETE <itab> WHERE <field> = 0001.
6.1.13     Using WHERE clause in LOOP.ENDLOOP
Use:
Sort ITAB by NAME.
Loop at itab where name EQ SY-UNAME
Endloop.
Instead Of:
Read itab with key name = SY-UNAME.
L_tabix = sy-tabix.
Loop at itab from l_tabix.
If name eq bijoy
Endif.
Endloop.

Flow chart+toplink

hi all,
i have an application in jdeveloper, i use toplink for the mapping
i need to draw (applet,java,jsp) a flow chart representing the human ressources departments.
for example:
Direction-->level 0
Divison-->level1 Division2-->level1 ....
Service1-->level2 ...
data concerning this departments are stored in database
need help

hi
good
there is nothing like any flow chat which ll varify abap program for abap standards,each and every client having different kind of standards,when you assign to a particular client you ll get there material which they maintain for SAP Standard code.
thanks
mrutyun^

Flow charts for work flow in dynpro / webdynpro

hey
is it possible to add flow charts ( not by pictures ) to a program in dynpro or webdynpro ?
i need some how to visualize all the station flow in my work flow ( the regular wf log is not good enough ) .
any ideas ?
regards
ASA.

My experience: very poor in powerpoint, I've just made one program to generate boxes with texts and relationships, but much more experience with OLE2/VBA.
But could you tell us exactly what you'd like to change in the WF log? (i.e. what information it doesn't have)
As I can understand your requirement, I think it's not worth developing such a program, you'll spend too much time, and it seems to not be a customer requirement...

How to make a form from a flow chart.

I want to make a flow chart into a form for a website. For example, I have a flow chart that leads to various solutions based on yes/no answers. I want the user to be able to enter in yes or no, and be directed to further questions or answers based on the answers they provide. Is there an easy way to approach this? Perhaps a form is not the best method?

Ajax (Javascript) would have an edge over PHP in regards to responsiveness. The best solution might combine all three methods (PHP, Javascript, HTML).
Are the responses going to be stored in a database? If so then you can also use the database to store the questions, complete with form fields.
One big difference between javascript and PHP is that PHP does nothing until you either open a new page or hit submit, and then it runs in a linear fashion until it reaches the end of the script. Javascript, on the other hand, can respond to other "events" that take place, such as when the user clicks away from a form field. With the advent of html5, HTML now has a little of the responsiveness of javascript.
PHP is the tool you use for processing form data and interacting with the database, if each form response is followed by a complete PHP processing cycle, the form will seem sluggish to the user. There are two solutions to this:
Have the user respond to a group of questions, then hit submit. The occasional lag for page reload won't bother the user.
Use AJAX to interact with the PHP form processing behind the scenes.
So yes, you can have one page that responds and changes depending on user input. PHP, javascript and HTML5/CSS3 can all be part of this. The specific way you build your solution will depend on your specific form progress and what technologies you are most comfortable with. For instance, my strong case is PHP, so I let it do as much of the work as possible, but I know coders who do much of what I would do in PHP with javascript, because that's what they are most comfortable using.
Any resources on how I might be able to do this via PHP?
PHP Solutions second edition by David Powers
Programming PHP by Lerdorf, Tatrow and MacIntypre

Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

Access table using ABAP program in other database

Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and Regards

Hi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar

FI- process flow charts

hello,
.I need FI- process flow charts. like exp: ar,ap,bank.assetaccounting. like pls help anyone.
rajesh

i think u r in blueprint preparation,...
this list may usefull to u ....
if you need any details please communicate me...
1     General Ledger Accounting
1.1     Vendor/Customer/GL rectification entries, Provisions or Finalization & other JVu2019s
1.2     Cash Transactions
     Cash Payments
     Cash Receipts
     Entering Contra Entries
     Inter Company Transactions
1.3     Travelling Expenses
1.4     Posting Salaries and Wages
1.5     Process Employee Expenses
1.6     Posting a Recurring entry
1.7     Financial Statements u2013 Reports
2     Accounts Payable Accounting:
2.1     Automatic Payment Program
2.2     Partial & Residual Payment Clearing
2.3     Credit memo u2013 with Reference
2.4     Manual Invoices & Credit Memou2019s u2013 without Reference
2.5     Accounts Payable u2013 month end processes
2.6     Reporting and Transaction details u2013 Over view
3     Accounts Receivable Accounting:
3.1     Incoming Payment Processing u2013 bill of exchange
3.2     Incoming Payment Processing u2013 Returned Payments
3.3     Dunning process (Reminder Notice)
3.4     Dunning u2013 BOE
3.5     Credit notes issued to customers
3.6     Debit note issued to customers
3.7     Customer open item clearance
3.8     Customer reconciliation and Balance confirmation
4     Asset Accounting
4.1     Asset Accounting u2013 Over view
4.2     Fixed Asset Acquisition
i.     Non-integrated Asset Acquisition Posting u2013 Before Invoice Receipt
ii.     Non-integrated Asset Acquisition Posting u2013 After Invoice Receipt, with Clearing
iii.     Subsequent Asset Acquisition
iv.     Post Capitalization u2013 Write-up to APC
v.     Acquisition of Fixed asset resulting from extraordinary Revenue
4.3     Asset under Construction (AUC)
4.4     Retirement of Assets
i.     Retirement with Revenue
ii.     Posting Gain or Loss on sale of asset
iii.     Retirement without Revenue (due to Scrapping)
iv.     Intracompany asset Transfer
4.5     Periodic Postings
i.     Recalculating Values
ii.     Information system - Reporting
5     Bank Accounting
5.1     Bank Receipts u2013 Cheque Deposits
5.2     Bank Payments u2013 Out going Payments u2013 Over view
5.3     The Cheque Return Process
5.4     Cheque Reversal & Realization Process at Head Office
5.5     BRS u2013 Over view
5.6     BRS u2013 Incoming Payment Reconciliation
5.7     BRS u2013 Out going Payment Reconciliation u2013 BRS
5.8     Impress Accounting System u2013 Process
5.9     LC management
5.10     BG Management
5.11     Cash Flow management u2013 Over view
6     A Look on Period u2013 End Closing Operations
6.1     Day u2013 End Closing Operations
6.2     Month u2013 End Closing Operations (General)
6.3     Month u2013 End Closing Operations
6.4     Year u2013 End closing Operations
Assign ponts if u feel so...

Flow chart of buielding abap program

Similar Messages

Maybe you are looking for