Flowed and Positioned --- Difference

Hi All,
What is the difference between Flowe and Positioned in the object pallet.
Thanks in Advance,
Praveen

hi,
Subforms that position content Objects in the subform are positioned according to their individual X and Y coordinates. When the form is rendered, the subforms are laid down in an order determined by their positions in the Hierarchy palette.
Subforms that flow content Objects in the subform are positioned during the data-merging process so that no objects are rendered on top of each other. Subforms that flow content are laid down in ascending order.
Regards
Trilochan

Similar Messages

OWB Process Flow and Mapping Differences

IHAC where we have a mapping which produces two different operations depending on how the mapping is called from the Deployment Manager.
When you call the mapping as an individual job an INSERT is performed.
However, when the SAME MAPPING is called as part of a process flow a MERGE is performed instead.
The test data for each case is exactly the same and the result set at the end of the mapping, using either, method is the same.
Has anyone come across this sort of behaviour before ?
I would be grateful to know why this is happening and should I be concerned about it given the fact that the outcome is the same in both cases.
Thanks in advance
Chris

Hi Christopher,
This is funky. I have not seen this before... The only thing I can think of is that in the process flow someone changed the runtime parameters for the mapping, doing a set based execution while the map itself is doing this row based...
Should not happen otherwise...
Jean-Pierre

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

Difference between Flow and FlowN

Hi,
can you please tell me difference between flow and flowN
Thanks
Nirmal

see : http://docs.oracle.com/cd/B31017_01/integrate.1013/b28981/parallel.htm
flow will make use of a predefined (by you) amount of branches, with flowN you can make the amount of branches dynamic
so lets say we have
getUserDetails
getAddressDetails
now you can use flow, create 2 branches and do the call to both methods in each branch.
let's say you receive a list of customers in your service interface. Now you can loop over with for-each of every customer and sequential do logic like getCustomerDetails in the loop, or ...you create a flowN and N will be the count of the customers in the list.
After this you will get N parallel branches which will do getCustomerDetails (instead of the other sequential looping)
so flowN is the dynamic variant which will create N branches based on the counter-field you base your expression on

Cover flow and album sort issues

I just got a 80GB iPod classic for Christmas and I have noticed some annoying differences between iTunes cover flow and iPod cover flow:
1. In iTunes cover flow, when you have songs with "Unknown Album", they clutter up the cover flow for each artist. In iPod cover flow, they are sent to the back of the cover flow in a nice little "Various Artists" cover. I like how this works on the iPod better.
2. iTunes cover flow sorts by album artist, so you don't see a separate album for each non-album artist song.
For example: If I set my album artist for the Saturday Night Fever soundtrack to "Saturday Night Fever" (don't ask why, this is how i like it sorted) then I will only see one "Saturday Night Fever" rather than one for Bee Gees, one for Kool & the Gang, etc.
iPod cover flow sorts by artist, so you see a separate album for each non-album artist song. I like the way this works in iTunes better.
3. When sorting by "Album by Year" in iTunes, syncing the iPod doesn't seem to follow the same sorting. Albums are still sorted on the iPod alphabetically. I want them to sort by year on my iPod.
So I would appreciate it if someone could help me with all 3 of these issues. As you can see, sometimes iTunes is better for me, sometimes iPod is better for me.

3. Playlists should be sorted in the same way as they are in iTunes. The Cover Flow order is fixed.
This is not the case, at least not with iTunes 7.5.0.20 and my 80GB Classic running 1.0.3 on it (current version as of this writing). In iTunes, under LIBRARY, I select Music, and I have my music sorted via *Album by Year*. This works perfectly in iTunes. I'll use my Soundgarden library as an example, as it shows the problem nicely.
*_iTunes order_:*
Ultramega OK
Louder Than Love
Screaming Life/Fopp
Badmotorfinger
Superunknown
Songs From The Superunknown
Down on the Upside
A-Sides
That's ordered by date and is perfect. +Ultramega OK+ was released way back in 1988, while A-Sides was released nearly 10 years later in 1997. In Cover Flow View it works great. However, in the iPod it's sorted alphabetically, which is completely wrong:
*_iPod Classic_:*
A-Sides
Badmotorfinger
Down on the Upside
Louder Than Love
Screaming Life/Fopp
Songs From The Superunknown
Superunknown
Ultramega OK
This is totally wrong. And I haven't yet found a way to force it.
Apple, please, this shouldn't be that difficult.

Does the contoured move uses the PID parameters and position feedback?

Hello
I want to use the contourd move to generate a continuous movement,but i do not know if this kind of move just acst like a open-loop move .What i means is does it sends the target position directly to the DAC without the PID loop and position feedback?

The PID controller is still enabled when running the motor in
contouring mode. Otherwise you couldn't do any position control at all.
On a board level the only major difference between contouring mode and
any other mode is the source of the dynamic setpoints passed to the PID
loop through the spline engine. While in contouring mode the setpoint
information comes from the buffer in the onboard RAM, in other modes it
is dynamically calculated by the trajectory generator on the board.
Best regards,
Jochen Klier
National Instruments Germany

Scale and position effect

I have adjusted the scale and position in my edit but the result is not smooth.
I am using a still image and I want to zoom out and pan on the image. I have set a key frame at the beginign and one at the end of the desired time. for some reason it starts zooming out very slowly and it picks up in speed towards the end. Does anyone know why that is?

Thanks for the message, I tried it but it deosn't seem to make any difference.

Switch Sign For Flow and Switch Type for Flow

Hi Can any one Please make me clear at least with 3 examples how to understand Switch Sign for Flow and Switch Type for Flow
and also the good example with Balance Recurring Account Types

Hi Chennai,
Consider an account "Fixed-Assets" supported by movement analysis in Custom1, as follows:
ClosingBalance
OpeningBalance
Additions
Disposals
If you mark the Custom1 member Disposals as SwitchSignForFlow, you will enter positive values in Disposals but HFM will subtract from the other two members to calculate the Closing Balance. You may use this functionality if your client prefers to see all values as positive on the reports.
Using the same example, you might recognize that while Closing and Opening balances are of balance type (they provide a snapshot of the account at a specific instant meaning that you see the same number whether you view the YTD or Periodic values of the account), Additions and Disposals are movements, which means that they accumulate during the same year starting from a zero balance on 1/1/201X and therefore you will see different numbers depending on viewing the YTD or Periodic values of the account. In order to provide with this behavior you have to mark both Additions and Disposals with SwitchTypeForFlow. If you don't they will behave as the underlying account (the Fixed-Assets account) and like the other two Custom1 members, Opening and Closing balance members.
As for the BalanceReccuring, an account of this type behaves like a normal Balance account, but once you input a number in an intermediate period (say June), the same number will be copied to all following periods (July-December) until you override the numbers by explicitly inputting new values. With a normal balance account, all following periods will be empty.
--Kostas

Report - quantity and value difference between delivery and invoice?

Hello experts,
My client use u201EProof of deliveryu201D t-code: VLPOD. There is always quantity and value difference between delivery and invoice.
Do you know any report which will show this differences between delivery and invoice?
Best regards,
Maciej

Hi,
Note 867678 - Proof of delivery (POD), delivery and billing document will help you to understand POD flow.
You have the tcode VLPODF/VLPODL/VLPODA, but perhaps they will not help you. So, as the before note suggests you, you can use the tables VBFA, LIKP, LIPS, VBRK, VBRP, TVPOD and TVPODG to do your own report.
I hope this helps you
Regard,
Eduardo

Object Size and Position values not being retained

Hi,
I'm trying to set the size and position of a picture object in a report. This logo, should appear on the top right corner of the report.
The margins of the report are Left - .79 in, Right - 0.79 in, Top - 0.79 in and Bottom - 0.39 in.
The size of the picture object should be 1.574 x 0.79 inches.
I have ensured that File -> Page Setup -> dimensions are in INCHES.
I right click the logo and select 'Size and Position'.
I set 'Y' (distance between top of object and top margin) = 0. This is to perfectly align the object with the top margin.
Now, i set the height of the object = 0.79 inches. Ok the dialog and close.
The strange thing happening is, when i re-open the size and position dialog, i see that the values i set are not being retained.
0.79 becomes 0.810
and
0 become -0.010.
What am i doing wrong here? How can i make sure the values i specify in the size and position dialog are retained.
Thanks.

Ensure File | Options | Layout tab has the following UNMARKED!!!!
Design View
Guidelines
Grid
Preview
Guidelines
Grid
Ensure that "Snap to Grid" is turned off.
Make your grid size larger (.5 inches for example)
What is occurring (I suspect) is that your objects are snapping to the grid - thus changing the position and possibly size due to the Snap to Grid being turned on.

Can you change the units used for size and position in layout editor?

Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!

Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie

Flow and Static checks

Hi there,
I created a datamodel and have applied a condition to it. When I execute the interface the invalid records are captured in the E$ table but all the other valid records do not appear on the target table. I couldn't able to find the reason for this. I have applied flow and static check to the condition and the same for the table column. Im not sure why the validate records are rejected.
Any help is appreciated.
Cheers

HI!
Let me understand, do you want the invalid records at target table?
If you use the flow control it will keep the records at E$ and WILL NOT load it.
If you use static control, it will LOAD the data and, after that, verify what are the records with problems.
Don't use both controls at same time, it doesn't make logical sense unless when needs to validate distinct constraints at each moment.
Does it help you?

Is there a way to remove the size and position readout when moving Lines in Keynote?

When moving the endpoints of lines while creating a presentation, a size and position readout appears on the screen. This obscures details below it, often making it difficult to precisely position a line. Is there a way of disabling this? The option in Preferences for disabling this readout for objects does not work for lines. Is this a bug, or am I missing something?

sberman wrote:
I'm not completely sure I understand, but ...
Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
I will tell him about that, but I don't think that would be it if that is related to animation.
We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

Error while assigning the user to orgunit and position

Hi,
We are having the below issue :
1.       Obtain the HR master record (P Ids) created by interface - ECC
2.       Assign a valid user to this HR master record -ECC
3.       Do the position/Org assignment against this P Id or personnel master record - ECC
4.       Transfer the Org Id, then the position ID and then the personnel master ID (P Id) to SRM u2013 ECC
5.       Check if the user is in SYNC in SRM - Ideally he should inherit the mandatory parameters from the above Orgs in the structure without which he shall not be able to shop in SRM u2013 step executed in SRM
Please let us know if this process is as per the expectation.
If so, we are ending up with error in the third step where the assignment is not allowed since the personnel master record is created with prior date than the position and the Org units.
Actually we are getting the idoc with user alone from other system, org and position ids are blank. So we are assigning the user in the system and we are getting above error.
Is this the correct process to bring the users alone into the system and doing the position/organization assignment in ECC now?
Or the Idoc comes with this data as well?
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Mar 5, 2012 5:33 AM

Thank you vikas for your reply.
So we should bring all the data in the idoc(O,S,P). Even though O, S are present in the receiving sytem?
Regards
Venkatesh P

Any idea while updating job and position --I am getting the following error

Hi, I am trying to update job and position to the existing employee but getting the following error
Error report:
ORA-20001: The primary key specified is invalid
Cause: The primary key values specified are invalid and do not exist in the schema.
Action: Check the primary key values before attempting to carry out the operation again.
ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 16616
ORA-06512: at line 35
Code which I am using is as below
declare
l_assignment_id number;
l_object_version_number number;
l_special_ceiling_step_id number;
LC_EFFECTIVE_END_DATE DATE;
LC_EFFECTIVE_START_DATE DATE;
LC_DATETRACK_UPDATE_MODE VARCHAR2(100);
LC_GROUP_NAME VARCHAR2(1000);
LC_CONCATENATED_SEGMENTS VARCHAR2(1000);
L_ENTRIES_CHANGED_WARNING VARCHAR2(1000);
LC_GSP_POST_PROCESS_WARNING VARCHAR2(1000):=NULL;
LC_PEOPLE_GROUP_ID NUMBER:=NULL;
LC_OBJECT_VERSION_NUMBER NUMBER:=NULL;
LC_SOFT_CODING_KEYFLEX_ID NUMBER:=NULL;
LC_SPECIAL_CEILING_STEP_ID NUMBER:=NULL;
LC_GRADE_ID NUMBER:=NULL;
LC_OTHER_MANAGER_WARNING BOOLEAN:=NULL;
LC_SPP_DELETE_WARNING BOOLEAN:=NULL;
LC_ORG_NOW_NO_MANAGER_WARNING BOOLEAN:=NULL;
LCTAX_DISTRICT_CHANGED_WARNING BOOLEAN:=NULL;
L_EMP_START_DATE DATE:=NULL;
J_LOCATION_ID NUMBER;
J_PAY_BASIS_ID NUMBER;
J_SEGMENT5 number;
J_SEGMENT3 number;
J_SEGMENT2 number;
J_GRADE_ID number;
J_PAYROLL_ID number;
begin
l_assignment_id := 214;
hr_assignment_api.update_emp_asg_criteria
P_VALIDATE => FALSE
,P_EFFECTIVE_DATE => TRUNC(sysdate)
,P_DATETRACK_UPDATE_MODE => LC_DATETRACK_UPDATE_MODE
,P_ASSIGNMENT_ID => l_assignment_id
,P_GRADE_ID => J_GRADE_ID
,P_POSITION_ID => 5062
,P_JOB_ID => 3063
,P_PAYROLL_ID => J_PAYROLL_ID
,P_LOCATION_ID => 142--J_LOCATION_ID
,P_ORGANIZATION_ID => 81
,P_PAY_BASIS_ID => J_PAY_BASIS_ID
,p_segment5 => J_SEGMENT5
,p_segment2 => J_SEGMENT2
,p_segment3 => J_SEGMENT3
,P_OBJECT_VERSION_NUMBER => LC_OBJECT_VERSION_NUMBER
,P_SPECIAL_CEILING_STEP_ID => LC_SPECIAL_CEILING_STEP_ID
,P_PEOPLE_GROUP_ID => LC_PEOPLE_GROUP_ID
,P_SOFT_CODING_KEYFLEX_ID => LC_SOFT_CODING_KEYFLEX_ID
,P_GROUP_NAME => LC_GROUP_NAME
,P_EFFECTIVE_START_DATE => LC_EFFECTIVE_START_DATE
,P_EFFECTIVE_END_DATE => LC_EFFECTIVE_END_DATE
,P_ORG_NOW_NO_MANAGER_WARNING => LC_ORG_NOW_NO_MANAGER_WARNING
,P_OTHER_MANAGER_WARNING => LC_OTHER_MANAGER_WARNING
,P_SPP_DELETE_WARNING => LC_SPP_DELETE_WARNING
,P_ENTRIES_CHANGED_WARNING => L_ENTRIES_CHANGED_WARNING
,P_TAX_DISTRICT_CHANGED_WARNING => LCTAX_DISTRICT_CHANGED_WARNING
,P_CONCATENATED_SEGMENTS => LC_CONCATENATED_SEGMENTS
,P_GSP_POST_PROCESS_WARNING => LC_GSP_POST_PROCESS_WARNING);
end;
Thanks in advance
Rajini

Please post the details of the application release, database version and OS.
What HRMS patchset you are on?
Please see if these docs help.
Getting "ORA-20001: The primary key specified is invalid" Error Using HR_ASSIGNMENT_API.UPDATE_EMP_ASG_CRITERIA API [ID 737145.1]
Hr_assignment_api.Update_emp_asg_criteria Gives Ora-20001, Ora-06512 [ID 334491.1]
Thanks,
Hussein

Flowed and Positioned --- Difference

Similar Messages

Maybe you are looking for