Flows cross companies
Hi experts
How can I customize a purchase flow (MM) in the company A on the basis of sales flow in the company B (cross company flows) ?
I want to create a purchase order and goods receipt in company B when posting goods issue in the flow of sales of company A.
thanks
Edited by: Yassine NYAB on Dec 21, 2010 12:04 PM
Hi,
I am not really sure about a similar flow possibility in standard between Cross Company with Sales and PO flow.
But there are following two flow you can try:
1) Intercompany STO.
2) Intercompany Sales->
e.g there are 2 legal entities(Company Code) A & B both manufacture product XYZ through plants A & B respectively for each entity.
Sales Order:
From Sales org A, Delivering Plant B for customer ABC.
Delivery:
With PGI from Plant B.
Billing:
Intercompany Billing 'IV' Sales org B will Bill the ordering Sales Org 'A'
Customer Invoice 'F2'.
Thank You,
RB
Similar Messages
-
Need to know xml flow cross references, Its Very Urgent Help me
need to know xml cross references coding and sample files for indesign cs3
As far as I know, cross references are available in CS4/5, not in CS3. It is possible to write a script that creates hundreds, thousands of them very quickly taking the necessary information, let's say from tagged text. You wrote only one line, so it's difficult to me to imagine what XML structure you have and what your requirements are. But here is a script I wrote a while ago -- probably you need something similar, and here's the source code (not final version, of course) to show the approach I used.
Kasyan -
Posting Level 01 documents allow cross company postings - unexpected
hi,
Previously users could not enter a PL01 document that crossed companies.
Now they can.
I had previously thought that this was not possible for PL01 but what is happening is
when they enter cross-company postings (2 lines, one each to a different cons unit)
the system creates 2 documents,
with 2 balancing entry lines (one to each unit) to the clearing item
- just as can happen when a PL20 or PL30 manual posting is to the same company but cross-profit centres.
So my question;
is this normal behaviour in BCS?
was this always possible but the users just hadn't achieved it until now
NB they are adamant that this was not possible previously, until the Support Packs were implemented sometime last year
Finally, is there a way to stop it from happening?Concur with Dan.
Most likely, that you've met the 2nd case: the DocType with configured clearing ConsUnit was attached to manual entry task. It might be not easily seen. Just check it out and remove if find.
Edited by: Eugene Khusainov on Jan 28, 2010 11:13 PM -
BPC NW10 - data collection - manage the flow of intercompanies
Hi,
For the budgeting process, there are 2 budget form
First input Form 1: enter the total amount of balance (ignoring the flow intercompanies)
ENTITY
ACCOUNT
INTERCO
MEASURES
Company1
Acount 1
NO_INTERCO
100
Second input Form 2: enter the flow inter companies
ENTITY
ACCOUNT
INTERCO
MEASURES
Company1
Acount 1
Company2
20
In summary, unfortunately the data records are
ENTITY
ACCOUNT
INTERCO
MEASURES
Company1
Acount 1
NO_INTERCO
100
Company1
Acount 1
Company2
20
Target : when saving data of flux intercompanies Form 2,
the system automatically reduces the values 'no_intercos'
ENTITY
ACCOUNT
INTERCO
MEASURES
Company1
Acount 1
NO_INTERCO
80
Company1
Acount 1
Company2
20
We created the excel formula on the record 'No_interco ' = sum of flow intercompanies - total amount = 100-20 =80
But after save data, the excel formula disappears
We changed the sheet options / refresh : we select the following options
Keep formula on data
Keep formulas static that reference report cells
But after save data, the excel formula always disappears
Do you have the solution for reduction the values 'no_intercos' to 80?
BastienHi Bastien,
Sorry, but absolutely not clear. Can you show simple screenshots of the input forms?
Vadim -
Difference between business area and profit center
hi all
could you please tell me about difference between business area and
profitcenter.
thanks,
regards,
chennuri.HI
Read below
Profit Center - The profit center view shows the various
internal areas of responsibilities. Objects such as cost
centers, materials, etc can be used for profit center
analysis. Profit center can be used to determine the
revenues, costs, and profitability for specfic areas of
responsibility.
Business Area - Business area forms an important part of
external reporting. Analysis of various segments, product
divisions, regions etc is possible using business areas.
Business Area: This is optional
This can be used cross compane codes
This is for Internal Purpose
It is not Legal Entity like Co Code
The transation entered in Business are, Debit total will
not tally with credit total
Since it is used for segment wise or area wise or line wise
this is used for internal report purpose only .
Balance Shhet and P & L stataments can be drawn on segment
wise
Profit Centre: Generally in terms of SAP or Finance the
meaning of Profit centre is to know the profitabilty.
In same manner , The managers wants to know the ROI from
their investments, obviously we nned to use the tool.
This ROI may be geographically or area wise or division
wise. P.C provided us profitablity of the particular area
for internal purpose ( Only for Internal )
Business Area is an optional entry.Whenever company wants
financial statements businessarea wise we can maintain
BAs.And also we can maintain BA as Segment Wise,Product
Wise,Geographical Location wise.
Profit center is used to know the profits of companies.PC
is also used for to know the profits as aProduct
wise,Segment wise,geographical location wise.If anything
wrong inthis answer plz correct me..
Hope this helps
Good Luck
Hari -
ON BEHALF USER PLANT AND SLOC?
HI,
We have on behalf functionality implmented for cross companies.
But while doing shopping, in shopping cart onbehalf user plant and sloc is not populating in plant and sloc.
F4 list is not coming in shopping cart.
Can anyone please help how to get that F4 list.
For example : X user is from US and Y user is from France.
Now X user is doing shop on behalf for Y user. Now in shopping cart France plant and sloc should come in F4 list.
But nothing is coming as of now.
Please let me know how to proceed on this.
Regards
Venkatesh PHello Venkatesh,
If a user A makes a shop on behalf user B, you have to assign to user A (in 'Extended Attributes' tab) plants and storage locations assigned to user B.
Check also correct value for company code attribute 'BUK' is assigned in 'Attributes' tab for user A, according to plants from user B.
Regards.
Laurent. -
Dear Experts,
Currently we are implementing Segment reporting (NewGL) where we have a requirements to picture complete balance sheet at segment level and segment consolidation as well. For, segment consolidation we need partner information in order to eliminate. If we use different controlling areas, is it possible to get the partner information as we have activated the CO-FI real time integration for cross companies and cross segments.
Somebody please suggest me regarding
Thanks in advance
Regards,
RamHi,
PAth:
Financial Accounting (New), choose Financial Accounting Global Settings (New) ® Ledgers ® Fields ® Display Scenarios for General Ledger Accounting.
Active Scenarious (Partner's Busienss Area )
Business area - RBUSA
Trading partner business area - SBUSA
Regards,
Viswa -
How to post Intercompany GL using BAPI
Hello Experts,
We have a requirement for Intercompany GL posting , we are using BAPI_ACC_DOCUMENT_POST for standard posting but looks like it does not work with intercompany posting.
Can anyone let me know how to post Intercompany GL either using BAPI_ACC_DOCUMENT_POST or any other method.
Thanks
ShramanHi Shraman,
For a requirement for Intercompany GL posting, use BAPI_ACC_DOCUMENT_POST for standard posting with some advanced parameters
In Header of the BAPI, pass the hardcoded values like
DOCUMENTHEADER
OBJ_TYPE = FKKSU
OBJ_KEY = $
OBJ_SYS = System name
BUS_ACT = RFBU
Other parameters you can pass in Header is:
USERNAME
HEADER_TXT
COMP_CODE
DOC_DATE
PSTNG_DATE
TRANS_DATE
FISC_YEAR
FIS_PERIOD
DOC_TYPE
REF_DOC_NO
If you are posting a document in cross-companies 1000 & 1001, you need to pass cost-center with the line item. That is the mandatory field.
Thanks,
Guru -
How to post invoice parked using BAPI- BAPI_INCOMINGINVOICE_CREATE
Hi all,
Can anybody help me with the following scenario:
I am parking Invoice document using BAPI: <b>BAPI_INCOMINGINVOICE_PARK</b>. It gives me a document no. which I can see in frontend system also by committing the BAPI.
But when I try to post the same using BAPI: <b>BAPI_INCOMINGINVOICE_CREATE</b> , It gives me a different document no.
Means it is not posting the document which has been parked earlier but it is creating totally a new document. Can anybody tell me using BAPIs how to post the same document that I had parked using BAPI: <b>BAPI_INCOMINGINVOICE_PARK</b>??
Thanks
SaurabhHi Shraman,
For a requirement for Intercompany GL posting, use BAPI_ACC_DOCUMENT_POST for standard posting with some advanced parameters
In Header of the BAPI, pass the hardcoded values like
DOCUMENTHEADER
OBJ_TYPE = FKKSU
OBJ_KEY = $
OBJ_SYS = System name
BUS_ACT = RFBU
Other parameters you can pass in Header is:
USERNAME
HEADER_TXT
COMP_CODE
DOC_DATE
PSTNG_DATE
TRANS_DATE
FISC_YEAR
FIS_PERIOD
DOC_TYPE
REF_DOC_NO
If you are posting a document in cross-companies 1000 & 1001, you need to pass cost-center with the line item. That is the mandatory field.
Thanks,
Guru -
Cross Docking Process Flow - ECC6.0
Hi,
Can some explain what is the process flow for cross docking in ECC 6.0. How to mark a customer as Cross docking customer?
Thi sis the process flow we are trying to map in ECC6.0 for croos docking.Please let me know is this process flow can me mapped in ECC? Thanks
Goods Receipt
X-dock temporary bin allocated
Put-away label printed [X-dock put-away bin]
Delivery created
Picking TO created
Picking TO confirmed
Packing created
Delivery Note printed
Shipping labels printed
Post Goods Issue postedHello,
For Oppertunistic Cross dock..
You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
for more information about the complete config you need to see the sap link below. sure it will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
thanks.
tkreddy -
Cross docking and flow throughs
Hi Gurus,
Can anyboday send me configuration steps in cross docking and flow through scenarios in is retail.
thanks in advance.
Regards,
PSHi,
Explore following URL
Collective Purchase Order
Bye,
Muralidhara -
Hi ,
Our client uses 2 SAP different Systems for EU and US region.
For intercomany movements between these Systems, we use STOs for these cross system goods flow.
We use inbound deliveries for receiving goods.
It works for STOs with no account assignment but for STOs with some account assignment , we could not post goods receipt for Inbounds . System throws error message as please enter valid plant instead of XXXX where is XXXX is a plant number in different SAP system.
Is some extra config required for intercomany movemnts with account assignment.Hi,
Could you please elaborate more your error :
As which Acc. assignment cat you using in PO, and what type of intercompany STO's you creating in system ?
What Doc type used for creating STO intercompany ?
Regards,
Ninad Kshirsagar -
IS-R: Picking in Flow Through and Cross Docking
In Merchandise Distribution (conceptually),
- for recipient-driven flow through, picking is done before GI.
- for cross-docking, no picking.
Which configuration controls the picking has to be done in flow-through and not to be done in cross-docking?>
Vitthavat A. wrote:
> In Merchandise Distribution (conceptually),
> - for recipient-driven flow through, picking is done before GI.
> - for cross-docking, no picking.
>
> Which configuration controls the picking has to be done in flow-through and not to be done in cross-docking?
Hi,
Path - IMG - Logistics General - Merchandise Distribution -- Plant Profiles for Merchandise Distribution
If you indicate not relevant for picking
or
Delivery Item category - OVLP
Same indicator is available at delivery item category
Regards
Vijai Jain -
Hi
has anyone experience of implementing "Cross system flow of goods" WITHOUT APO ? The SAP Help for 'without APO' has 'page not found' since 4.7 which implies this is no longer offered. There are plenty of OSS fixes for the solution with APO which again implies this option is not possible without APO.
regards
IreneHi,
and thanks for looking into this.
No, I do not have an APO (company is using JDA/manugisitcs) and I want to set up cross system STO between two ECC 6.0 systems directly.
I do have a number of idocs running between the systems already and also know the place where to configure a plant for cross system goods flow.
What I would like to know is if this scenario is supported at all and if yes, what is the sequence of idocs and and what are their triggers (in other words - the technical side of the business process) .
Best regards
Norbert -
I have a situation where we have 2 companies merging together. We have users in forest 1 and users in forest 2. Is it possible to have a user in Forest 1 who can send emails with an email domain from Forest 2?
For sending an email i would create a send connector to route emails over to Forest2 email servers and have them send to the outside world. But receiving emails is where i'm stuck. The MX record would point the email into Forest2 but we would
need the email to be routed to the users mailbox in forest1.
Is this possible?If any email system is authoritative for an SMTP namespace, it is responsible for sending non-delivery reports (NDRs) for any message sent to an address in that SMTP namespace that it doesn't have in its directory. And you can't share an SMTP
namespace between two email systems without having at least one of them as authoritative for the namespace - one of them needs to own the namespace so that if a message has an invalid recipient, the email will get an NDR.
In the steps I outlined above, you have one Exchange system (Forest1) that has a namespace it is not authoritative for (the Forest2 namespace) already. You can't also set Forest2 as non-authoritative for the namespace, or you risk mail loops. So for
each mailbox in Forest1 that you need to set a Forest2 SMTP address on, you need to have a way for Forest2 to send email to that mailbox. This is why you need contacts. Delete the contacts, and you can no longer send from Forest2 to the mailboxes
with Forest2 addresses that reside in Forest1 - Forest2 has no recipients with that SMTP address, so it will bound the message (note - this includes inbound messages from the Internet, since all messages bound for the Forest2 email address are first delivered
to the Forest2 email system).
In the example you mention, you are sharing the namespace with a third-party email system. In that example, that third-party email system is authoritative for the namespace and is responsible for the NDR.
Maybe you are looking for
-
Not able to do anything after i sign in
anytime i sign in so i can join it sends me to a page that says this section is currently unavailable. when i check the status all areas have green check marks. i need help please. thanks,
-
Problem in Dierct print of Adobe form
Hi all, My requirement is to print the Adobe form directly.when user execute the particular Z transaction. Then the form should be print. I have given all print parameters to the FM FP_JOB_OPEN.I am using ADS. But i am getting the print when I excute
-
"Preparing to import" message won't end.
I'm trying to import pictures from an external hard drive to my new iMac, but it just keeps cranking nonstop with the message "preparing to import." There are over 5000 pictures on the hard drive, but how long should this take?
-
Can someone help me out: in Safari there is a programm installed for addware (mac keeper) I can not remove this. Does anyone know how to remove these adds from safari (there is no programme in the finder to find)
-
Regarding table maintenance generator
hi i have one scenario . supppose there are 4 fields in a table. user enters data into it using table maintenance generator. he enters data only for 2 fields remaining 2 fields should get populated automatically. is it possible?