FLTS column in top vs. mjf, minf in mpstat, and mf in vmstat
I am looking for information on how the FLTS column in top relates to what is displayed by vmstat, and mpstat if applicable.
The version of top installed on the system I am using displays fewer faults in top than what is displayed by vmstat so are they the same thing? Also, are the major and minor faults displayed by mpstat virtual memory page faults or something else?
I am trying to track this down because we have a process running on a database server that copies a lot of data from one filesystem to another filesystem (Both filesystems are on a NetApp as is the database itself). While this copy is running performance is not ideal and top displays high numbers in the FLTS column so the DBA is convinced it is a bad thing (The scan rate, page outs, DFL, TFL, etc. are all 0 so it isn't a paging issue and service time, wait, etc. are OK for the NFS mounts). Unfortunately I cannot find any GOOD information on how the FLTS column is calculated so I can send this to the DBA.
Thank you,
sorenm
I am looking for information on how the FLTS column in top relates to what is displayed by vmstat, and mpstat if applicable.
The version of top installed on the system I am using displays fewer faults in top than what is displayed by vmstat so are they the same thing? Also, are the major and minor faults displayed by mpstat virtual memory page faults or something else?
I am trying to track this down because we have a process running on a database server that copies a lot of data from one filesystem to another filesystem (Both filesystems are on a NetApp as is the database itself). While this copy is running performance is not ideal and top displays high numbers in the FLTS column so the DBA is convinced it is a bad thing (The scan rate, page outs, DFL, TFL, etc. are all 0 so it isn't a paging issue and service time, wait, etc. are OK for the NFS mounts). Unfortunately I cannot find any GOOD information on how the FLTS column is calculated so I can send this to the DBA.
Thank you,
sorenm
Similar Messages
-
Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.
A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date. -
I am using CS6 InDesign on a PC using a Windows 7 operating system.
Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
However, in Windows 7, this is not the case. Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain. I cannot see the graphic depictions of options on the left side of the screen. They are all too small. How can I make your program increase the size?NO way.
Mylenium -
I can no longer get "Tools" or "Options" at the top of my screen. Google and Yahoo toolbars dominate the entire top of the screen. I want to get rid of them and go back to an original screen shot. How?
<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
<u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
<u>''Windows'' Method 2.</u> Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
<u>''Windows'' Method 3.</u> Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]''' -
hi, I am trying to find out a bit more about creative cloud... I currently use PS5 extended... I have it on my desk top at home but travel often and use a pc. which does not have PS5 because it is licensed to mac... So i am now thinking of using the cloud... will i be able to use it on both computers? and will it work if there is slow or no internet?.
Here are some links to general information. IF you have specific questions feel free to ask...
Creative Cloud Learn & Support
http://helpx.adobe.com/creative-cloud.html
Creative Cloud / Common Questions
http://helpx.adobe.com/creative-cloud/faq.html
Creative Cloud Plans
https://creative.adobe.com/plans -
AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?
Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
[http://www.google.com/support/toolbar/?hl=en] <br />
Or visit the Google Toolbar forum. <br />
[http://www.google.com/support/forum/p/Toolbar?hl=en]
As far as your UserAgent showing Firefox 3.0.11, see this: <br />
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware. -
Column Modification impact to Data foundation, Business layer and Data source in DS 1.2
Issue
An existing Business Layer that is consumed by a Data Source definition in Design Studio 1.2 Version: 12.0.2.201311041742 seems to invalidate the entire Data Source object after modification to the base tables DDL (data definition). Information Design Tool used is Information Design Tool 4.1, Build:14.1.1.1036, Version: 4.1 Support Pack 1.
Background
A modification was needed a base tables DDL (data definition). Specifically a column that stores the Date value as a varchar needed to update to a Date data type. After the modification was completed the Data Foundation and Business Layer in the Information Design Tool (IDT) needed
modification as well to reflect the updated column data type. Refreshing the Data Foundation and/or the Business Layer did not update the column Data Type. The step of dropping and re-inserting the updated table in the Data Foundation and subsequently the Business Layer updated
the expected columns Data Type as expected. All the existing Data Source definitions that were in use throughout the application (Design Studio) were invalidated causing the following error after the DDL update.
After rebuilding the Data Source definition in Design Studio, the issue was no longer there however, the existing Data Sources were still non-functional and were subsequently deleted.
In Sum
Is there another way to make changes to the base table(s) without negatively impacting the Data Foundation (IDT)àBusiness Layer (IDT)àData Source Definition (Design Studio) to the point where Data Sources on the Design Studio have to be redone preceded with similar effort at the IDT level? Is there a step(s) that I missed?
Any insight would be appriciated.
Regards,
KrisHi Kris - it looks like you have not downloaded the latest SP's for Design Studio 1.2
http://service.sap.com/sap/support/notes/1954748
I recall in late May SAP issues SP2, and earlier in the year they issued SP1 - could you apply both SP's, client-side and platform-side? -
I have taken all the steps to verify my iCloud account but in Settings the "verifying" icon at the top of the page keeps spinning and never actually verifying the account
Did you respond to the verification email from Apple by clicking the Verify Now link? If not, check the email address you used to set up your iCloud account. Check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
I have been a PC user since 1987 and find the iWorks programs far less intuitive than the MS Office products. I have been using a Word doc template, which I customized back in 1990, and all of my client records use this template. So, as I am converting to Apple, I need to find a way to adapt the iWorks Pages to accomodate my doc needs, if that is possible. As indicated in the question, I need to set the top margin on page 1 to .5" and, using either a section break or a page break, enable the top margin to be 1.0" on all of the following pages. I read somewhere on the net that this might be accomplished by using a layout break but, when I tried that, the margins on all pages seemed to still be connected to each other. Is there a way to accomplish my objective?
Okay, narrow is narrow. Just need to make sure we're clear on the point that we're discussing the top and bottom margins.
I just found another post that led me to "Defining Layout Margins" in the Pages help files. Between that post and the information in this help message (specifically item #4), I was able to deduce that Pages does enable me to do exactly what I need.
1 - set the page margins on page one;
2 - create a layout break at the bottom of page 1, which will effect the next page;
3 - with the cursor on page 2, open the inspector;
4 - go to the layout inspector;
5 - change the "before" margin.
In the layout inspector dialog box, "before" = "top" and "after" = "bottom", not as in paragraph or line formatting. I don't know why it couldn't just say top and bottom. That would eliminate a lot of confusion.
This has enabled me to have one top margin on the first page and a different top margin on all other pages. However, as nothing is perfect, this process must be repeated on each page. A little more work but definitely worth the effort, if you need this type of formatting. Better than not at all in other words.
Thanks for your time and help.
Ross -
How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
I have simple mxml code
<mx:DataGrid id="DGG"
editable="true">
<mx:dataProvider>
<mx:Object scheduledDate="4/1/2006"/>
</mx:dataProvider>
</mx:DataGrid>
<mx:Button id="SetBut"
label="Set Array as Data Provider"
click="SetDP(); AddBut.visible = true;"
x="100.5"
y="164"
width="211"/>
<mx:Button id="AddBut"
label="Add a column!"
click="AddCol();"
x="100.5"
y="194"
width="211"
visible="false"/>
<mx:Script>
<![CDATA[
import mx.controls.dataGridClasses.DataGridColumn;
import mx.collections.ArrayCollection;
[Bindable]
public var MyAC:ArrayCollection=new ArrayCollection([{scheduledDate: "4/1/2006", homeTeam: "Chester Bucks"}]);
public function SetDP():void
DGG.dataProvider=MyAC
public function AddCol():void
MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
DGG.columns.push(new DataGridColumn("Umpire"));
]]>
</mx:Script>
I want to add rows to my table datagrid how to do such thing?
How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
(You can put this code in Flash or AIR app - it will compile with no errors, but will not add any columns=( )Change this:
public function SetDP():void
DGG.dataProvider=MyAC
MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
public function AddCol():void
var dgc:DataGridColumn = new DataGridColumn("Umpire");
var ca:Array = DGG.columns;
ca.push(dgc);
DGG.columns = ca;
Dany -
I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls? -
Just got a 5C, is it normal that when you transition from Siri to calling someone that the symbols along the top or screen go all feint and blurry?
I have one it works fine. yeah, the Mac instructions aren't great. Try this.
(1) make sure you have your VCR audio and video outputs connected to the side with the two selection switches.
(2) be sure you know the difference between the audio and video outputs no matter which colors you use.
(3) make sure the indicator light is green on cable that connects to your computers firewire port.
(4) when you operate the vcr through Imovie. you will only be able to play your vhs tape. so to fast forward or reverse. you must use your vcr remote or your hand.
(5) to import your footage just click on import in imovie.
That should solve your problem. Also, in the future put these questions in the imovie forum.
P.s. if this is helps you give me a vote or two. LOL
anymore questions email me -
How display top 3 revenues in one block and remaining in another block
How display top 3 revenues in one block and remaining in another block.
create a variable as
v_Rank =Rank([Revenue])
then create a block level filter on the 2nd block as v_Rank Greater than 3.
you may need to modify the variable formula as per requirement to get the rank of the row. -
If the power button on the top of the phone stops working and it sounds loose is that covered and can be fixed/replaced?
Fix an appointment at the Genius bar for evaluation and possible replacement.
-
When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install
https://forums.adobe.com/thread/1195540
Maybe you are looking for
-
how can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows
-
Hi, We have migrated from 10G to 11G recenlty. There is a module called xreadlines which is used in a Jython procedure and the procedure was working fine in 10G. But in 11G its throwing an error: Import xreadlines not found. Note: This issue specific
-
Hi What is the Significance / use of JEXC in PO Pricing Procedure Thanks Prasad
-
Fucntion to Calculate business days (exclude weekends & holidays) between two days
Hello, I need to be able to calculate business days between two dates excluding weekends and holidays. I do have a date dimension and also flags which denote weekday, holiday. Would really appreciate help in building a udf for the business days calcu
-
Re: Disappearing changes in Repository
Geoffrey, We have run into this problem as well. It seemed to happen when we checked out some components edited them, saved the workspace multiple times, and then later in the same Forte session received a "Hose 15 Error" which makes the workspace re