Flush headphone jack?

Does anybody know if the new 3G has a flush headphone jack?

It means that you can use any "mini" headphone jack, you don't need the "special" iPhone headphones. You can use any mini jack headphones.

Similar Messages

Is the headphone jack flush on the new iphone 3gs?

i was just curious if they left the headphone jack flush like the iphone 3g?

Yes .. big improvement over my 2G in that respect (and many others).
But choosing a case which does not interfere with some headphone plugs can still be an issue.
Phil

Headphone jack is broken! [T500]

I'm always using headphones while on my computer. Earlier today, my headphone jack no longer works. Even when the headphones are plugged in, audio only comes out of the speakers. At first I thought it was an audio driver problem so I uninstalled and reinstalled the driver. It still wasn't working on my Windows 7 drive. So I then swapped in my XP drive and the audio still wasn't working. It won't work on my Ubuntu drive either. I blew some compressed air into the jack but it didn't fix the problem. Obviously it's an internal hardware problem. I'm out of my warranty (bought in June 2009, only got a 1-year warranty). I'm a college student and this is my only computer. How much will it cost for my laptop to get fixed? Is it possible for me to make the repair by myself? Please help. I'm very distraught.

if it is indeed the headphone jack that is the issue, then it is very difficult to repair it. I suggest you get a usb sound card or a expresscard sound card (the latter is better since it sits flush in the system).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Headphone jack not working on new Macbook Pro what is causing this?

My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!

Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
I love this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not!

Flush headphones?

What does that mean?

This means that there will no longer be an indented headphone jack. This was so one must purchase iPhone headphones (or an adapter) because most headphones did not fit inside the collar. Flush means the headphones just plug down flush with the top of the phone.

Headphone Jack def

Got a Zen Micro with a headphone jack problem? I fixed mine very easily. This could also help with other models too. Here?s how:
Note: disassembling your unit will void any remaining warrantee.
Problem: The headphone jack solder joints get cracked from the prying force of the headphone plug. This force could be especially severe if you carry your player in your pocket and you?re not careful. It is an engineering problem but unfortuanately hard to prevent on any pocket device due to the design of the industry standard mini-phono headphone plug exerting prying force on the jack.
You?ll need a tiny Phillips screwdriver, a small pocket knife or small flat screwdriver, a fine soldering iron and some rosin-core solder, and a hot-melt glue gun.
Begin by sliding the on/off/lock switch to the locked position. Pry up the plastic jack face plate cover. It?s just stuck on with glue. You can replace it again when finished. This exposes two tiny Phillips-head screws. Remove them.
Slide the battery cover door off. Remove the battery. You?ll notice a metal plate under the battery that serves among other things, to secure the white plastic back cover to the main chassis of the player, and that the metal plate has two tabs that are inserted into slots at the top by the three gold battery contacts. Using your fingernail, slide the metal plate downward away from the battery contacts end. This will disengage the chassis from the back cover.
Use a small screwdriver to gently pry the bottom of the case out away from the chassis. This disengages a catch holding the chassis to the body. With the bottom of the case pried out, press on the metal plate down a the bottom at the small white circular Creative Labs warrantee seal to swing the chassis out from the white plastic back cover. Gently remove it all the way and set the player chassis aside in a safe place.
You?ll notice a small circuit board with the jacks and switch in the top of the back cover. It is held to the cover by two tiny Phillips-head screws. Remove them. Remove the circuit board from the back cover. The screws also hold a small metal cover over the jacks. Remove it.
Carefull remove the existing hot-melt glue from the factory. Take special care not to knick anything with your knife and don?t simply rip the hot melt off, but carefully cut and/or peel it off gently so as not to damage anything.
Notice 4 leads from the headphone jack are soldered onto the circuit board. If you look closely you?ll probably see that one or more are loose. It's usually the top right one between the headphone and USB jacks. * Solder them again, using more solder than was previously used, but don?t put too much on the top left one as it could come into contact with the little metal jack cover when it is replaced. Solder the 4 USB jack leads (outer cover ones) and the 4 on/off/lock switch leads while you?re at it. Replace the small metal cover to make sure the solder joints for the headphone jack don't come into contact with it.
Now you?ll want to secure the jacks so that the newly repaired solder joints are not stressed and broken again... If you have any doubts about your re-soldering job you might want to take a few minutes and reassemble and test the repair before using the hot melt. When ready, apply a generous amount of hot-melt adhesi've to the sides, backs and tops of the jacks and IMMEDIATELY replace the small metal cover pressing it quickly down until the mounting holes align. Very carfully remove any excess, taking extreme care not to knick anything.
Replace the circuit board into the back cover and replace the screws. Pay special attention to the fit. Make sure any extra hot-melt you may have missed removing isn?t interfering with the fit.
Carefully reassemble the chassis into the back cover, paying special attention to properly align and connect the two socket connectors on either side of the boards, and pressing firmly to ensure proper connectivity. Check the fit. Make sure the top of the display face is exactly aligned flush with the cover when reassembled. Check all the edges of the front face to ensure they are all aligned flush with their corresponding sides of the back cover.
Replace the small screws on the top by the jacks that attach the back cover to the chassis. 
Replace the stick-on plastic top-end face plate. Slide the metal plate in the battery compartment back up into the locked position. Make sure the 4 tabs on the sides of the plate lock over the corresponding tabs in the sides of the back cover (you can see through 4 holes in the sides)
Replace the battery and battery cover. Turn the power on. If successful, have a listen. You should hear both sides of the audio while wiggling the headphone plug.
It?s too bad you have to go through this but your Zen Micro is definitely worth the effort to fix, which you will agree having done it, is easier than it seemed like it would be. You shouldn?t have to do it again, but with the hot-melt for adhesi've, you can, using a little heat.
* Alternately you can use epoxy cement instead of hotmelt. I personally perefer this method but you have to be competent at electronics rework technicques, in particular, de-soldering of the jack. If you're not comfortable with this then just use the hot-melt. You'll need to de-solder the four jack leads from the circuit board pads and remove the jack. Make sure the leads are straight. Dry-fit the jack to make sure the leads aren't bent from the removal process and dry-test on the pcb to make sure the leads line up with the pads. Mix a pea-sized blob of epoxy cement and apply some on the bottom of the jack, but not enough that it will squish out and interfere with the cover, and position it back on the pcb. Place the jack on the board and line up the leads again on the pads. Re-solder the leads, replace the metal cover, and screw down the cover right away. (don't over-tighten) Reassemble and enjoy.
Message Edited by watcher on 04-27-2006 0:46 PM

Very nice.. I didn't need to bother with all those words. Thanks!
I noticed when I looked at the site above mentioned by SSR that I missed the step about releasing the catch at the bottom of the unit that holds the chassis with the back cover. Hopefully I didn't cause anyone to bust off the tab by leaving this step out.
Still I think it's a good idea to use the glue or it will likely happen again. The solder pads are pretty small so they might not hold on their own... Still it's easy to take it apart and do it again... but the fewer times you have to do that the better, and also, the pads have been known to delaminate.. then you're stuck with having to use wires AND then you'll HAVE to use glue to hold the jack in place..
Message Edited by watcher on 2-22-2005 07:00 PM

ITunes no longer keeps speakers running on headphone jack

iTunes no longer keeps my external speakers running when connected by audio cable to the headphones jack. After 1:45 min:sec, my Logitech Pure-Fi Anywhere 2 speakers power down when connected to my computer playing iTunes.
The speakers do not power down for audio generated from other sources on my computer. When I play a video or audio file through Safari or another browser, the speakers work fine. When I listen to an audio file by selecting it in the Finder using Apple-Y ("quick-view"), the speakers run continuously until the end of the track without powering down. When I use the speakers configured the same way with other software (such as Skype), they work fine.
The speakers do not power down for audio generated from other DEVICES. When I plug the speaker cable into the headphone jack of either my iPhone 3Gs or my partner's mp3 player and play audio, the speakers work continuously.
I've looked at trouble-shooting for iTunes and found nothing on the Apple site or the web or in the iTunes preferences to keeping wire external speakers live during iTunes playback. I've tried having the speakers connected to a power source or running on batteries but the problem is the same. I've reset the speaker device with no change. I've reinstalled iTunes, no change. The Apple Store genius bar cleared all caches and restarted, no change. They reinstalled the computer system, but found no change.

Hi Dexterdawg
Can you direct me to the thread as I can not sort out the same problem on my iMac
Thanks

Headphone Jack No Longer Works

Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
http://tinyurl.com/272myv

IPhone 4 headphone jack not working right.

So the headphone jack in my iPhone 4 i don't think is working properly. The right headphone does not put as much sound out as the left. I'm not sure why it was working perfectly just yesterday. I haven't dropped it or got water in it or anything. I tried plugging it in and unplugging it a few times, i reset my phone, turned it off then on and nothing seems to be working. Its not on silent and the volume thing is centered. Idk what could e happening. Help!!!

I would test the headset in another device such as a computer
and test another 3.5mm minijack headset in the phone to tell if it's the phone or headset

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Is there a way to disable the headphone jack?

A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

Well you have to take a break, sleep, etc sometime! The repair may take just a few minutes.
Your other option would be search on the Fixit website and YouTube's "how to tutorials."

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Video out from the headphone jack died... 30gb 5g

Hi all.
So, I have a 30gb 5g ipod. I have played video out of the headphone jack to a tv for years now. I have the apple version of the video out cable. So, recently, the video stopped playing. The audio plays. YES, it is set to tv out = on, NTSC. This worked fine. Now no video. Video DOES play on the ipod itself. And, I bought an expensive dock cable that has composite out and that does work for video. So, I am just wondering what happened to my video from the headphone jack. I guess I could try to get it fixed, but is it worth it? Any ideas would be appriciated! Thanks!!

OK, I was DETERMINED to figure this one out...simply because it USED to work...
Somehow (last 'update' I assume)...my 'TV out' was turned off.
On my 80GB model, it was under menu > videos > video settings > TV Out
I just turned it 'on' and I was back in business...of course it doesn't make up for last weekend, when I was out of town trying to get the darn thing to work...but at least it works now.
Hope this helps.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

Flush headphone jack?

Similar Messages

Maybe you are looking for