Flux montage video et encodage premiere, media encoder, encore

Bonjour
Je me permets de vous poser quelques questions car j'ai un problème au niveau "optmisation" et travail en flux montage vidéo etc. J'essaye de vous détailler mes méthodes de travail et je cherche à éviter de perdre mon temps à cause des problemes d'encodage.
En effet, je commence par monter les séquences vidéos sous adobe premiere cc. Je précise que je travaille tout au format FULL HD. Ce sont des fichiers vidéos non compressés en HD avec un reflex 5D Mark III. Et je mets donc la résolution maximum.
Une fois la séquence vidéo entièrement montée, j'exporte le projet final sous un seul fichier vidéo unique sans compression, je garde toujours les mêmes formats. Par ex, mon fichier final pèse 15 GO pour une durée d'1H environ.
Ensuite ce fichier unique Full HD, je lui "convertis" au format bluray 264 grâce au logiciel Adobe Media Encoder.
Ca me donnera un fichier unique d'environ 5 GO avec une très bonne qualité d'image. Ce qui veut dire que je pourrais le "graver" sans probème sur un dvd double couche par ex.
Ensuite je finalise par le dvd authoring qui est adobe encore CS6 ( malheureusement, pas de version récente).
Le fait de prendre un fichier réduit, je me suis dit que je n'aurais plus besoin d'encoder et que je pourrais finaliser le projet rapidement.
Mais en fait, non, il y a toujours un transcodage à faire sous adobe ENCORE CS6.
Comment éviter cette fameuse étape d'encodage... Je souhaiterais garder la même taille et exporter plus rapidement. Pourtant, j'ai choisi d'exporter au "même format" mais ca encode toujours...
Ca me fait toujours des "pertes d'encodage" inutile sous adobe encore ...
Je ne sais pas si je me suis fait bien comprendre et j'espère trouver des aides ici ...
Sinon, je n'ai pas compris le fameux adobe bridge. Si je comprends bien, tous les fichiers/dossiers sont au même endroit en utilisant plusieurs logiciels différents..
Un peu comme le principe d'utiliser adobe encore CS6 et ouvrir directement sous photoshop pour "retoucher" ou modifier les menus et ca "modifie" en temps réel pour adobe encore CS6 ?
Je vous remercie de votre attention...

Similar Messages

Only one CPU core is working during video export from Premiere Media Encoder

Windows Resource Monitor showed cores 'parked' at first. I was able to turn that feature off using regedit. They no longer say they are parked'. but still only one core is at 100% while the other seven cores are at close to zero %. Windows 7 Ultimate SP1 64-bit. i7-2600k processor 3.4 GHz running at 3.8 GHz XMP setting. ASUS P8Z77-V motherboard 32 GB RAM.
I had this problem in the past and fixed when I turned off core parking. But, I recently clean installed Windows and problem has returned. I contacted Microsoft and they assured me that the problems lies with Premiere or AME.
it just took over an hour to export a video that should have taken 10 minutes

This has been driving me CRAZY... so going over the message boards from 2 to 5 am this morning I found the best explanation I have seen. The problem is that Adobe Creative Cloud is NOT "Processor Group Aware". Windows parses any more than 36 cores into "Processor Groups" and while the Pro version of Windows 7 & 8 can handle 256 threads they have to spread them across multiple processor groups.
Simple Version: AREA | How many cores does 3ds Max support?
Microsoft's Explanation: Processor Groups (Windows)
Clearly, this is an Adobe Problem... If any engineers are reading this PLEASE review the below and incorporate it into your next build of Creative Cloud!!!
https://msdn.microsoft.com/en-us/library/windows/hardware/dn653313%28v=vs.85%29.aspx
Again, I bought a VERY expensive machine based on your white paper that recommended Dual Xeon Workstations. Please, Please Give us the product you PROMISED!!!
Michael

For some reason, I can't compile a video or image sequence anymore with Premiere, Media Encoder, or After Effects... All CC

I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders. I export from Poser Pro Game Dev to Png Image Sequence. I organise a cam angle in After Effects...I re render out to a png image sequence.. continuing to hold quality. Then when a scene is done; I use Premiere to export a 1080 by 720 wmv format 29.97. But now I can't encode from Premere, Media Encoder, or Affter Effects. Please ...Any help would be much appreciated.

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

24p to 29.97i in Premiere, Media Encoder or After Effects?

Sorry to bring up a much discussed topic, but as I looked on the web and in the Adobe forums I got sort of lost in the tangle of discussion about how to best take a 24p sequence in Premiere and convert it to 29.97i for broadcast. I feel like this is something that Premiere might be able to do? Or maybe Adobe Media Encoder? I generally see from other forums and posts that this is done in After Effects, an app I have never even opened. So if the answer is that I need to use AE, then I'm hoping for some detailed guidance or perhaps a tutorial video? Though as I say that I know that certainly sounds rather demanding
Any comments or assistance would be greatly appreciated!
Thanks much,
Bradley

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

Premiere & Media Encoder show Quicktime presents but fail on encode

My Premiere & Media Encoder CS6 both show Quicktime presents but fail each time I try to encode directly to Quicktime with .mp4 codec.
Quicktime is installed on my machine, which runs Windows. I'm using Adobe Creative Cloud CS6.
Goal: to use the Quicktime format and sucessfully encode video sequences as .mp4 files at various settings.

BUMP! To this thread as I am still having an issue encoding QuickTime files. Below is a quick recap with some new information.
All testing is done on a system running Windows 7 Professional 64-bit SP1 with Adobe Media Encoder CS6, CC, and CC 2014 (same results across all versions).
The failure occurs after a few seconds of attempted rendering, with only the following message from AME:
"Encoding Failed
Export Error
Error compiling movie. Unknown error."
Important note: This problem DOES NOT exist on a similar system running Windows 7 Ultimate SP1. So it would appear the problem may be OS specific to Windows 7 Professional (although there are a few forum threads with people experiencing the problem on Macs as well).
That said, here's what happens on the Win7 Pro system:
QuickTime movie encoding fails at 1920x1080 both from a dynamically linked Premiere timeline and from a rendered file.
TESTS:
1) H264 video with AAC audio FAILED
2) H264 video with uncompressed audio FAILED
3) Uncompressed video with AAC audio FAILED
4) Sorenson video with uncompressed audio FAILED
5) Uncompressed 10bit YUV .mov with uncompressed audio WORKED!!!!!
Of course, a :30 second television commercial rendered this way is near 5GB and is not the way most broadcast stations want a file delivered.
To sum up: all of the HD presets and custom settings for QuckTime with any sort of compression, fail to render on systems running Windows 7 Professional.
Here is a link to a similar issue, but the solution listed did not work in my case.
Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2
Here is a link to the ongoing discussion about this on Creative Cow
PC H.264 Quicktime crash : Adobe Premiere Pro
Any insight is welcome.

No video tab in adobe media encoder cs4

Hi,
I'd like to change the bit-rate when I export, but I have no video tab in adobe media encoder cs4 v4.2
http://adwords.google.com/support/aw/bin/answer.py?hl=en&answer=105647 explains how to change bit-rates but it unfortunately doesn't help me.
Any ideas would be apprciated.
Michael

I found the video and audio tabs etc.
First open in, "device central".
And then if you have "basic settings" displayed you still can't see the "bitrate" and "advanced settings".
You either have to scroll down, or close "basic settings".
And then all is revealed.
Michael

Premiere/Media Encoder can't render/export after 10.9.3 update. Any Answers?

My computer ran the OSX 10.9.3 update a couple nights ago, and suddenly Premiere/Media Encoder can not export. It just freezes up the computer until I cold crash it. Same if I try to render a timeline in Premiere. This issue just started yesterday. It still persists after wiping my hard drive and doing a clean install of everything, which of course just put 10.9.3 back on there. This issue does not exist on my laptop that has not been updated yet. However, I have enough work and not enough time to be trying to edit everything on my laptop while this get worked out. Has anyone else got this issue in the past day or two?

Hey Todd,
I had two active projects that suddenly could not render/export. One is quite massive and has RG Colorista quite a bit throughout it, however I could not export a timeline without any plugins on it. The other project is also clean of plugins. Then I started a new project and it went out just fine until I put the RG plugin on it. But here is my newest glitch. I just made a change to an old show and all of my titles done in Title Tool were resized and positioned. Blown up and shifted to the right. If I take the same file and put it on my laptop which still has not got 10.9.3, they are just fine. Scaled properly and centered between title safe. But now on 10.9.3 they are blown up and going off the screen.

Encore.Prelude.After Effects.Premiere.Media Encoder CS6 立ち上がらない

Encore、Prelude、After Effects、Premiere、Media Encoder　CS6 が立ち上がりません。
PCのOSはこの通りです。
Dreamweaver、Flash、Illustrator、Photoshop、Fireworks、Auditionは立ち上がります。
普通に使えます。
立ち上がらないソフトは、起動しようとアイコンをクリックして、モニタ中央に起動している最中のグラフィックスが
現れると、そのままの状態になってしまいます。
（応答なし）になるので、毎回強制終了しています。
今まで１年以上普通に使ってきて突然こうなりました。
原因が分かりません。
こちらで行った解決策は以下の通りです
①
アンインストーラーを使用して、アンインストールし、そのごすべてのアプリを戻しましたが
アンインストール以前と同じ状態です。
②
macOS再インストール
ローカルのデータをすべて削除して再びインストールしました
しかし、同じくたちあがるソフトとそうではないソフトがあります
どこに問題があるのか、わからない状態で困っています。
なにとぞご回答よろしくおねがいいたします。

再度の再インストールが必要になりますが、Cleaner Toolを使ってみては如何でしょうか。
CC Cleaner Tool を使用してインストールに関する問題を解決 | CC、CS3-CS6

Premiere/Media Encoder crashing EVERY time I try to export project.

Many of you have encountered similar issues, and I've scoured the forums with no resolve to my specific issue. Crashing every time I go to export in Premiere or ME. Using latest versions of both through CC--8.2
On Windows 7, I've looked into the AppData/Roaming/Adobe/Media Encoder/<version #> solution--that folder is empty. Don't know why. Hidden files are turned on.
Specs: Intel Core i5-4570 CPU @ 3.2 GHz
Ram: 8 GB
64 bit Windows 7
Trying to export to H.264 --> .mp4
This error message pops up roughly 75% through the process (Note: It's roughly around the same time there's a video transition effect in the project, if that counts for anything. Not sure it would, as I completed a project with at least 12 transitions last week, albeit much shorter than this one. 3 mins vs. 1 hr).
Yes I'm using OpenCL.
Someone help.
Thanks.

No, just that something went wonky with that one. Try the Film Dissolve instead. If that also has a problem, then it might be the clips and not the transition which is the cause.

Premiere / Media Encoder CS5 and deinterlacing

Maybe it's just me, but I'm not at all happy with the deinterlacing results from Premiere CS5 and Media Encoder. I've been using Premiere since CS3 and hoped for improvement in CS4, but no. And now with CS5, it's still just not good...
This is what I do in an nutshell: I edit 1080i HDV video in Premiere (using 1080i timelines) and export it to several formats, including 720p for Youtube. Now, whatever I do, I alway get some staircasing / aliasing on deinterlaced output. Not really bad and hardly noticable on video, but very noticable on logo's (which - ironically - are progressive to start with). Preview in Premiere looks fine, but as soon as I put the content through media encoder: staircasing. Even with the new "Use maximum render quality" option enabled.
When I output my 1080i timeline as 1080i MPEG2 video everything looks pristine (motion adaptive deinterlacing is then done upon playback by my nVidia graphics card). When I leave all rendering options the same and export 1080p or 720p - leaving deinterlacing to media encoder - staircasting is easily visible on logo's and detail is lost in the video compared to real-time deinterlaced output by my graphics card.
I guess my main question is: Why can't Adobe get this right? nVidia and ATI can do it very well and in realtime on their graphics cards (and have been able to do so for several years now) and freeware filters such as the ones used by ffdshow do a far better job too.
Why can't a high-end and expensive video editing solution like CS5 get this right? Hugely disappointing

Hi Todd, Steve,
I'm running CS5 a Cuda enabled system (Intel Core i7 965, 12 GB DDR3, MSI GeForce GTX 285 with 2GB memory and a secondary GeForce 9400GT 1GB, running Windows 7 Ultimate 64 bit).
Cuda support is enabled in premiere CS5, as my timelines are yellow even when I enable cuda accelerated effects such as color correction. So no problems there.
I work with 1080i50 HDV and AVCHD files, which I normally use in a HDCAM EX 50i timeline (I use HDCAM EX because that enables me to render all effects and graphics in 1920x1080, instead of a HDV timeline which renders everyting in 1440x1080). I have tried using native HDV timelines too, but that reduces horizontal sharpness on our logo and on sceen graphics, while the deinterlacing problems I encounter are exactly the same.
The problem is that when I export an HDCAM EX timeline to 720p, I get noticable degradation in image sharpness and visible jaggies on our on-screen logo. The same applies when I export to 1080p. When I export to 1080i (so no deinterlacing is done by Premiere or Media Encoder), the file looks great on playback (deinterlacing done in real time by my nVidia card).
For the last few weeks I've been working a round the problem in a way which is not ideal for me, but which does seem to provide better results:
I now work with HDCAM EX 25p timelines instead of 50i, and I set the 'field options' flag for all my clips to 'always deinterlace'. This results in a loss of temporal resolution on my timelines (which I don't really want, since I also export to PAL 50i) but it results in noticably better sharpness and less aliasing on 720p output.
I'd love to share my on-screen logo title if you wish to have a look at it. Our logo contains a circle which shows easily visible jaggies when deinterlaced incorrectly. Please let me know how to get the files to you.
Thanks,
Eric

Help! Exporting problem in Adobe Premiere & Media Encoder

Hi guys,
I have a problem for which I did not find any solution on the web. I am not a very experienced Premiere Pro user. Maybe you can help me!
I made a project using Adobe Premiere Pro.
It has only one Sequence, but I have multiple clips which I want to export in that sequence as separate videos (see video 1, video 2, video 3 in the image)
The problem is that when I open Adobe Media Encoder, I open the sequence and I export all the different clips, exported videos do not keep all the Effects that I've applied to the video (contrast and brightness adjustments, other different image adjustments / effects etc).
So, I can automatically export all the videos with Media Encoder, but with no color corrections or other adjustments. When I play the Sequence in premiere it all looks good. When I export all the videos using Media Encoder, they do not have any effects applied.
If I export the sequence directly in premiere as a long video, it keeps the effects, but I get only one single video, and I need all of them exported separately.
The only way it works is making different sequence manually and exporting each one at a time. But I have 200 of them. So it will take a lifetime
I assume there is a smarter way to do it.
Did it happen to you? Is it something that I don't do right?
What should I do to keep all the Effects that I apply when exporting from Media Encoder?
Is there another method which I could use to correctly export all the 200 videos in that sequence besides doing it manually?
Thank you!

Did you happen to select clips from the Project panel in Premiere Pro and queue to AME? Can you export a timeline correctly (select a timeline > File menu > Export > Media > Click "Queue")? Effects are applied only on clips in timeline and not on media clips under the Project panel.

Questions About CS5 Premiere, Media Encoder, and Encore

I've just started using Adobe CS5 and have noticed several issues that preplex
me:
1. I edit a video clip in Premiere and put it into the que for Adobe Media Encoder to convert. The input file in Premiere is an HD MPG2 file. I've set the file output to be Blu-ray AVCHD with AC-3. After Adobe Media Encoder finishes converting the file, the time lengts of the video (M4V) and audio (AC3) do not match. They usually differ by 2 to 6 seconds. This causes video/audio sync problems when brought into Encore.
2. Some files that I que into Media Encoder from Premiere state that "Rendering media." I proceed with the conversion and every thing seems OK except it's not. When these files are brought into Encore, the first part of the files produce the same message. It seems that this part of the file is never rendered.
3. I had 250 gb available on my system drive before I started using Adobe CS5 but that free space quickly disappeared. I did learn how to clean up the cache mannually. It would seem that Adobe could do this automatically.
Any suggestions?

Please repost in the Premiere forum. This forum is for general suite-wide issues, generally relating to installation.

Where is Premiere, Media Encoder, Etc?

I just need to convert a video and went further and further into the Rabbit Hole. These apps are not available on my desktop CC app.
Ok, Why I ask myself. I know that previously PP wasn't available for Windows, but now it seems to be. But I can't tell for sure from the Adobe website. I went to the website, tried to download PP from there, and it just launched the desktop app which did nothing. So..
Is PP still not available for Windows?
What about Media Encoder?
Is Media Encoder supposed to come with PP?
Is this a limitation of the Academic version of CC?
Why does the Adobe website suck so bad? Why can't they simply list the programs that come with each version of Creative Cloud? These are tools for professionals. We know what the tools are for, stop the selling and tell us what the tools are and what it takes to get them.
If I could, I would go entirely open source. The commercial developer market is a monopoly here. Far worse than anything Microsoft ever did.
Thanks. I just singed the new terms of use, I guess I just broke a few of them.
Lon

Ah! Yes, I have a 32-bit machine. One mystery solved - I suppose it's the same with After Effects. This I would have known had I found the system requirements anywhere.
Do you know about the Media Encoder, whether it requires 64 bit or only comes with the other programs? I do have Premiere and AE CS4 which are fine. But I was hoping to be able to use an updated version of Media Encoder - it seems that the presets in CS4 are a bit outdated.
Thanks Arjun!

Premiere, Media Encoder and Flash Cue Points - bug?

I've been encoding a number of FLV On2 VP6 videos recently and using the new Media Encoder. For this project we need flash cue points (nav and event). I've discovered some weird things in Media Encoder - it's been duplicating cue points (or maybe the export from Premiere is buggy with cue points?).
I've seen the first couple of cue points getting duplicated with the first letter of the name capitalised and moved a frame on in time - very weird.
Anyone else seen this behaviour?
Paul.

OK, I think I've found out why - not a bug - user misunderstanding!!! (although tricky to find!)
Some of my source footage was created in After Effects. It turns out that there were a couple of cue points in the AE comp that had similar names to the cue points in Premiere - the AE comp was saved out to an AVI (with metadata enabled I think).
Premiere wasn't seeing this metadata and the cue points, but Media Encoder was (and it couldn't be deleted in ME - just kept coming back).
So - moral of the story - be careful with metadata!!!
I guess that Premiere should really show this embedded data though?
Paul.

HOW TO CREATE VIDEO DVD WITH ADOBE MEDIA ENCODER

I AM NEW TO ADOBE PREMIERE. AFTER SOME HOURS OF LEARNING FINALLY I FINISHED EDITING 30 MIN OF VIDEO. NOW I DONT KNOW HOW TO OUTPUT TO DVD ( VIDEO DVD ) TO PLAY IN DVD PLAYERS. PLS HELP.

Which version of Premiere? CC does not include Encore, but you can download the Encore CS6 from your account. As it is part of Premiere CS6, I believe you would need to download and install Premiere/Encore CS6, and then you can uninstall Premiere CS6, leaving Encore CS6 installed.
If you have Premiere CS6, then you already have Encore CS6. In either case, from Premiere, use File > Export > Media to open Media Encoder. For FORMAT, choose "MPEG-2 DVD", then choose an appropriate preset from the list. For instance, if editing with 1080i, then you might choose NTSC Widescreen High Quality. For 1080p, then use the Progressive version, etc.
What is your source video format? If starting with HD, then check the box at the bottom of AME for Max Render Quality, it helps with the scaling.
Hit EXPORT at bottom and it exports two files, an .m2v for video and .wav for audio. Open Encore, start a New DVD project, and then File > Import > As Timeline and grab both those files for import. From there, I recommend finding an Encore tutorial, too involved for me to type it all out here.
Hope this gets you going at least, but search online for tutorials, there is plenty of good, free stuff out there
Thanks
Jeff Pulera
Safe Harbor Computers

Flux montage video et encodage premiere, media encoder, encore

Similar Messages

Maybe you are looking for