FLV file won't play vid and audio for more than 3 secs

I tried to convert this FLV file to MOV using ffmpeg, and here the error i get
/usr/bin/ffmpeg -i internetmarketing.co.at/be87.flv internetmarketing.co.at/be87.mov
FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --prefix=/usr --libdir=${prefix}/lib --shlibdir=${prefix}/lib --incdir=${prefix}/include/ffmpeg --enable-shared --enable-libmp3lame --enable-gpl --enable-libfaad --mandir=${prefix}/share/man --enable-libvorbis --enable-pthreads --enable-libfaac --enable-xvid --enable-libdts --enable-amr_nb --enable-amr_wb --enable-pp --enable-libogg --enable-libgsm --enable-x264 --enable-liba52 --enable-libtheora --extra-cflags=-Wall -g -fPIC -DPIC --cc=ccache cc --enable-swscaler
libavutil version: 49.4.0
libavcodec version: 51.40.2
libavformat version: 51.11.0
built on Feb 4 2008 14:49:27, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
[flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
[flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
Seems stream 0 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 55.92 (671/12)
Input #0, flv, from 'internetmarketing.co.at/be87.flv':
Duration: 01:45:56.4, start: 0.000000, bitrate: N/A
Stream #0.0: Video: flashsv, bgr24, 640x480, 55.92 fps(r)
Stream #0.1: Audio: 0x0006, 22050 Hz, mono
File 'internetmarketing.co.at/be87.mov' already exists. Overwrite ? [y/N] y
Output #0, mov, to 'internetmarketing.co.at/be87.mov':
Stream #0.0: Video: mpeg4, yuv420p, 640x480, q=2-31, 200 kb/s, 55.92 fps(c)
Stream #0.1: Audio: aac, 22050 Hz, mono, 64 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
Unsupported codec (id=0) for input stream #0.1
[ps23240]$
that's the error i get, and supposedly ffmpeg should be able to handle this conversion
http://ubuntuforums.org/archive/index.php/t-431941.html
...so i have QT Pro, and it plays the vid and audio for 3 secs and then only plays video. I'd like to be able to use the vid and import it into iMovie. That's what I'm going for...
...suggestions

It seems that I can't login to the developer forums. I'm in the university program and when I try to login to apples developer forums I'll always be redirected to the login screen.

Similar Messages

Premiere Pro and Soundbooth won't play video/audio for more than a second.

Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

Here is the fix.
1. Open Finder and navigate to /YOUR_HD/Library/Preferences
2. Rename or move to the Trash the file: com.apple.audio.AggregateDevices.plist
3. Relaunch The Program

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an e

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an error message about verifying my subscription when I click and get my subscription verified it ays "OK" and I clock to to application and then it jumps back to verification needed - and so it goes on and on and on and..

Here are two other examples of this happening..
I expected more from Apple.
https://discussions.apple.com/thread/6919109
https://discussions.apple.com/thread/6683814

FLV files won't play on testing server

I've created a site with several videos on multiple pages. They play on my local computer but will not work when uploaded to my server. I get an error in opening the page and a "plug-in cancelled" message in the Activity window in Safari. Other FLV files play from other servers (even those I created and placed in other site files using the same method). I feel certain that something in my upload is causing the problem, but I cannot find any missing files or misplaced files on the server. NO FLV files are playing on the entire site.
A page in question is: http://www.hensondesigns.com/kpc/COMEDIANS/Guy_Branum-bio.html
(disregard the second and third videos on the page which are embedded from YouTube; it's the first video that won't play)
I've got the Scripts folder uploaded and the skin file within the COMEDIANS folder on my server.
Does anyone have any ideas what's wrong? I'm sure it's something simple but I have no idea.
Thank you in advance for your time and help.

Hans-G,
Thanks for checking the page to try to help. I apologize--I figured out the issue and didn't have a chance to remove my question from the forum. The issue was being caused by the files being on my server--somehow they weren't being found. I made an adjustment in Dreamweaver and they now work. Thanks again!
Is there a way to remove this entire post? I realize it will be of no help to anyone else, and I don't understand the problem and solution well enough to add details to make it helpful.

FLV files won't play in other programs

Has anyone experienced this...
I encode FLV's using PP CS3 with no hickups during the encoding. They play fine in Windows Media Player (latest version). But not all players play them. I put them on our streaming server and they won't play in our web pages using the Dreamweaver player. They play fine if i use the jeroenwijering media player but not Adobe's own media player which comes with Dreamweaver.
My biggest problem is that I have several FLV files that I need to convert to some other video format (AVI, MPG, etc.) But none of the programs I've tried will even recognize the FLV files created with PP CS3.
I used Movavi FLV converter and Riva FLV Encoder and a couple others and nothing works.
Has anyone else experienced this and have they found a solution?

I cannot help you with the playability issues of your FLV's, but:
My biggest problem is that I have several FLV files that I need to convert to some other video format (AVI, MPG, etc.) But none of the programs I've tried will even recognize the FLV files created with PP CS3.
I use Moyea's FLV Plug-in for PrPro. IIRC, it works fine in CS3, though is not supported under CS4.
To date, I have yet to be handed an FLV that it would not Import and edit properly. Thing that I like about it, is that it's a true plug-in and there is no conversion necessary.
I've used FLV-to-AVI, and it's slow. Also, the conversion is an extra step.
Good luck,
Hunt

ITunes treats video's as audio files, won't play video only audio

Hi,
I have the latest iTunes version & the latest OS X lion updates. Late 2009 27" iMac, intel core duo 2, 3.06 ghz. Forgive me if this comes across as rude, I'm used to being able to find my own solution to problems, and this has been frustrating me on and off for years. For as long as iTunes has had music video's and air play available I have the problem of my music videos, movies or video files of any type (all purchased for iTunes store) will only play the audio, no video. The old work around was to disable 'look for remote speakers' and then the video's would play fine (i googled it again to make sure there wasn't a newer work around). However that is not an option now, as iTunes automatically looks for airtunes speakers. The only work around I have found is to disable my network connection in system preferences, then go to iTunes, tell it to try and connect to the remote speakers. Once it fails to find the speakers, all video files work perfectly. Once the network is re-enabled its a 50-50 shot that the fix will work for a while before the problem returns. I have had this problem in pretty much every version of iTunes sense they released music videos. It's not a constant problem either, sometimes videos play fine, most of the time they don't without the workaround. (the problem was present in Snow leopard, leopard and I want to say Tiger, but its hard to remember about Tiger.) I have submitted this problem in the 'submit feedback for iTunes' several times and nothing. I am hoping one of you smart people out there might have an idea for a permanent fix. I wanted to send an email to apple support, but they say I must purchase support because my hardware is 'out of warranty' even though its a software problem, so they are no help. Any help or suggestions you may have are extremely appreciated.
Thank you,
AcidBurn003

Anyone have any suggestions?

Mixing and exporting for more than 8 channels and non-standard multichannel setups

I am trying to do something kind of unconventional, although I have seen people on the forums trying to do similar things. Unfortunately, it's unclear if they succeeded or not, and if they did, how.
I'm trying to figure out how to mix sound for an environment that has many (somewhere between 8 and 16) independent speakers, all connected to an audio interface. I know that WAV, AAC, and other audio file formats can carry that many channels and I can map them to the individual speakers. My question is how to edit/mix. Specifically,
Is this possible in Audition? It seems like it might be in CC, but not previous? (I have CS6.)
How do you set up the project file. When I create a new multitrack project, I can choose mono, stereo, or 5.1. The 5.1 option allows me to assign sounds to the five speakers in a standard 5.1 setup and the LFE. Is it possible mix for an environment with more than that? Or with a different configuration of speakers? In Audio MIDI Setup (for Windows people, that's where in OSX you set the more advanced audio preferences) I can configure up to 7.1 as well as geometric arrangements like quadrophonic, hexagonal, and octagonal. Is it possible in Audition to mix for anything like these?
There have been some threads where people talk about using 16 discrete outputs in Audition. How is this possible? Is each track able to be routed to a different output? If so, is it possible to write a file that has all of these tracks assigned to their discrete output channels?
Is it possible to nest audio sessions like you can nest Premiere sequences? For example, can I create a multitrack project with mono output and have that session be embedded into another multitrack session or do I have to finish editing the first one and write a file from it to use it in another project? Can buses be used to do this? What I'm wondering is if what I describe in #3 above IS possible, then how to have more than just a single pre-made audio file going to each of the outputs, to allow me to mix each channel with various sounds.
Sorry that's a few questions, but they all revolve around how to work with multi-channel sound that isn't stereo or 5.1.
Thanks!

SpdCncpt wrote:
I'm trying to figure out how to mix sound for an environment that has many (somewhere between 8 and 16) independent speakers, all connected to an audio interface. I know that WAV, AAC, and other audio file formats can carry that many channels and I can map them to the individual speakers. My question is how to edit/mix. Specifically,
Is this possible in Audition? It seems like it might be in CC, but not previous? (I have CS6.)
As you have probably gathered, this is effectively a work in progress...
How do you set up the project file. When I create a new multitrack project, I can choose mono, stereo, or 5.1. The 5.1 option allows me to assign sounds to the five speakers in a standard 5.1 setup and the LFE. Is it possible mix for an environment with more than that? Or with a different configuration of speakers? In Audio MIDI Setup (for Windows people, that's where in OSX you set the more advanced audio preferences) I can configure up to 7.1 as well as geometric arrangements like quadrophonic, hexagonal, and octagonal. Is it possible in Audition to mix for anything like these?
At present, this is restricted to what you can see, but there's sort-of a workaround - albeit not an ideal one...
There have been some threads where people talk about using 16 discrete outputs in Audition. How is this possible? Is each track able to be routed to a different output? If so, is it possible to write a file that has all of these tracks assigned to their discrete output channels?
If you have a multichannel sound device, and all the outputs are visible to Audition, then yes, each track can be assigned directly to a different output. And if you set one up, you can do this with buses as well...
Is it possible to nest audio sessions like you can nest Premiere sequences? For example, can I create a multitrack project with mono output and have that session be embedded into another multitrack session or do I have to finish editing the first one and write a file from it to use it in another project? Can buses be used to do this? What I'm wondering is if what I describe in #3 above IS possible, then how to have more than just a single pre-made audio file going to each of the outputs, to allow me to mix each channel with various sounds.
It's not possible to nest sessions at present in any version, and this has been asked about before. There are some significant issues with this, mainly to do with things like sample rates, output formats, etc. Doesn't mean that it won't happen, but don't hold your breath... As I said, there's a workaround, and yes, it's buses. Since you can effectively submix to a bus, and the bus output can go directly to hardware, then you can do what you want. The compromise is that in order to save the overall result, you'll end up with all of your source files, and a session file. And you'll have to play the whole thing back in Audition, rather than export it to a single file and be able to play it on a multichannel player. But yes, it should work.

My 3gs won't hold a full charge for long, and also won't stay in any ap for more than 2 minutes and shuts down. I have replaced the battery, same symptoms. Any ideas out there?

My iPhone baffles me. It started doing this and I was told it was the battery, so I replaced the battery. Nope, same issues. Here they are. After a full charge which takes only about an hour, it rapidly loses power after another hour or so. While in my apps, I can keep them open for maybe 2 minutes and they shut down. When I do the double tap to see whats running, the apps I opened are, however they are't. Wierd stuff here folks I hope someone has had this before and can help me out. I don't have a job and cant' afford a new phone.
thanks for help in advance.

Double-tapping the home button does not show apps that are running. This is not a task manager, it is merely a list of recently used/accessed apps.
Basic troubleshooting of the device is reset, restart, restore. Has a reset or restore been tried?
Check to see if updates exists for the apps, this could be a simple issue of a badly coded or buggy app that needs to be updated.

Why won't my iPod let me listen to music and videos for more than a few seconds?

When I press the music icon, my iPod goes to my playlists for about 2 seconds, appears to flash, and then returns to the home screen. What should I do??

Try the basics from the manual:
Restart.
Reset.
Restore.

Bookmarks is still stalling and freezing for more than 20 seconds!

This is my second query. Mozilla sent me a 'fix' problem email and I tried all the suggestions, but still... the freeze, stall problem with bookmarks persists.
Now after doing all that's been suggested Firefox Bookmarks is stalling... MORE often:
I got to 'Show all Bookmarks' and once it gives me that page, I click on an item...
STALL FOR 5-10 seconds
I click and select a bookmarked address
STALL AGAIN for 5-8 seconds
I delete a book mark
STALL AGAIN... 5 seconds
On and On and On...
Does this problem have to do with Synching Firefox with 2-3 other computers? Should I just disable synching?

You should be cautious with deleting the bookmarkbackups folder as well as that will remove all JSON backups and you lose all the bookmarks and you won't be able to rebuild the places.sqlite database.
You normally only need to remove the places.sqlite to recover from issues with this file.
You should disconnect from Sync temporarily before deleting the places.sqlite file.
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
See also:
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

When I have Firefox on and leave my computer on and untouched for more than about 20 mins my computer shuts down.

I get a blue message saying that the system encountered a problem and had to shut down. It then have to reboot. This problem coincided with an attack on my Yahoo my account when I was using FireFox. This has also caused an upload of a program called 'WhiteSmoke Translator' to my computer. My Internet Explorer works fine though. What can I do?

There is a similar known issue (see [https://bugzilla.mozilla.org/show_bug.cgi?id=614958 bug 614958]) that is fixed in Firefox 4.0b8 (release in a few days).
But I am not sure your issue is related. It can also be caused by a spyware or a virus. Scan your computer with anti-virus and anti-spyware softwares.

My computer no longer has audio and it won't play DVDs or audio CDs.

As stated in the suubject line, my computer no longer has audi and it won't play DVDs or audio CDs. It's an hp Pavilion dv6-6c 15nr Entertainment PC. I haven't had it a year yet.
This question was solved.
View Solution.

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

IMovie Audio Files Won't Play when the File is Moved

I imported a lot of audio files into iMovie from my desktop and I set them out how I wanted them in my project. But as my desktop was getting too cluttered, I had to move the audio files into a different folder in my documents, but now the audio files won't play and a warning icon is on each audio clip. Is there a simple way to relocate the files, without moving the files back to my desktop and without having to set out my all my audio files all over again?

Besides the two files you mentioned in your post, you also need to upload YOUR .swf as well. Then you need to upload your music file/folder.
Also double check that the path to your mp3 is correct RELATIVE to the location of the Web page that you placed the .swf on, NOT the physical location of the .swf.
var req:URLRequest = new URLRequest("../Sound/dreamsSound1.mp3");
This needs to be the path from the WEB PAGE to the mp3, NOT the path from the physical location of the .swf.
Once you have the pathing correct, it should NOT work when testing in Flash CS4, because the path to the mp3 needs to be RELATIVE to the Web page.
Best wishes and Good Luck!
Adninjastrator

HD movie and tv show files won't play in iTunes 10.6.3.

Just did a fresh install of Mountain Lion and for some reason now HD movie and tv show files won't play. I get a black screen.
Standard Def tv shows and movies are still playing fine though.
Oh and yes I already tried switching it to 32-bit mode via the "Get Info" screen. Same problem results.
Any suggestions?

I think I have the same problem. Every time I play some HD movies in iTunes the movie seems to be stuck and the screen black. If I scrub the movie forward I can see the picture, even captions, but I can't play them. I said some because there are certain movies that DO play. I mean HD ones, SD video plays fine. But I couldn't find any clue. It's not a matter of file size, neither a matter of resolution, compressio... I'll wait for an update (system and/or iTunes) and if nothing happens I think I'll dig a little more. This is no big issue for me since they ALL seem to play perfectly when I select AirPlay to my Apple TV.
I'll try checking tags

FLV File does not play when published to my web server

Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-II

Hi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

FLV file won't play vid and audio for more than 3 secs

Similar Messages

Maybe you are looking for