.flv files Exported from Sorenson Squeeze
Hi There,
I'm trying to convert a QuickTime file to a .flv file using
Sorenson Squeeze (MAC platform) and my audio is popping when I
preview the squeezed file in SorensonFLVPlayer.
The audio does not pop in my QT file.
My settings for the compression are as follows:
Codec: Fraunhofer MP3
Data Rate: 64 Kbps
Sample Size: 16
Sample Rate: 44100
Channels: Mono
I've tried changing them around and I get the same result.
Does anyone have any ideas on how to fix or work around this? I've
tried using no compression for the audio and it just outputs crazy
static.
Is there a way in Flash that I can sync separate video and
audio files? Maybe I could export video only from Sorenson and
export audio from elsewhere and re-sync in Flash.
Any help would be wonderful!
Thanks!
I've had similar problems with Sorenson and I reverted to
using the Flash 8
encoder, which worked fine.
Ryan
"krxstxn" <[email protected]> wrote in
message
news:ed1t74$2hq$[email protected]..
> Hi There,
>
> I'm trying to convert a QuickTime file to a .flv file
using Sorenson
> Squeeze
> (MAC platform) and my audio is popping when I preview
the squeezed file in
> SorensonFLVPlayer.
>
> The audio does not pop in my QT file.
>
> My settings for the compression are as follows:
> Codec: Fraunhofer MP3
> Data Rate: 64 Kbps
> Sample Size: 16
> Sample Rate: 44100
> Channels: Mono
>
> I've tried changing them around and I get the same
result. Does anyone
> have
> any ideas on how to fix or work around this? I've tried
using no
> compression
> for the audio and it just outputs crazy static.
>
> Is there a way in Flash that I can sync separate video
and audio files?
> Maybe
> I could export video only from Sorenson and export audio
from elsewhere
> and
> re-sync in Flash.
>
> Any help would be wonderful!
>
> Thanks!
>
Similar Messages
-
FLV files exported with Alpha have extra frames after end of sequence.
Sequence is 588w x 486h Animation+ codec, talent chroma-key (Conduit) on track 2 with no background on track 1. Flash 8 is installed. When I export using the QuickTime Flash export component using On2 VP6 with Alpha Channel settings, the resulting FLV has additional frames up to around 20 seconds for a 2 minute sequence. These additional frames are a freeze of the last frame in the sequence. I tried several different sequence codecs/Spark codec with same result. Even setting an In and Out on the sequence does not help.
One symptom I have noticed, is that when I click in the timeline beyond the last frame of video, I still see the last frame of video in the Canvas (But not in the BlackMagic video card output). Normally I would see black or checkerboard.
Anybody heard of any conflicts with the Flash Export component dircect from the timeline or via a batch export.
Exporting an Item Settings QuickTime (Animation+) files and then using Flash Encoder does work, but I am trying to avoid the extra steps. (250 sequences to export)
I suspect I have an issue with the export component, but I wanted to see if anybody else has experiences this before I reinstall FCP and Flash software.I have found what I believe the cause of the extra frames issue here, so I thought I would post it for others.
This appears to be caused by a problem between the Adobe FLV Export Component and QuickTime 7.2. Adobe's website says that Flash encoder has issues with non 44.1 kHz audio. Changing the sequence settings to 44.1 and rendering the audio solves the problem and FLV files exported from the timeline or via batch export are the correct length.
Exporting FLV files using either Spark or On2 VP6 with alpha, used to be a breeze with awesome results. I do this all day to support our Flash developers. The audio issue is easy to work around, but I also get random errors in the alpha channel of these movies now. These single frame errors appear as black flashes. There is nothing in the timeline that would appear to cause this. Re-exporting sometimes fixes it, or simply moves the error somewhere else in the timeline. This may also be related to QuickTime 7.2, but I don't know.
If anyone has experience these flashes in the alpha channel of exported FLV files please let me know how you resolved it. This is a major productivity killer.
Thanks.... -
Aspect ratio issues in iDVD with mov files exported from FCE
Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png! -
PAL files exported from FCP don't display
This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.Does the computer your using to view this video have Final Cut Pro installed?
-
Can't visualise text on PDF files exported from PS
PDF files exported from PS (levels included as we need them to be selectable) have corrupted text. When opening the saved pdf file, a part of text doesn't appear. It is usually starting from the second chapter of text. Any idea of how to solve this problem?
Hi Marco,
For now we have only fixed this in CC, but we are aware this problem also affects CS6 users and is a significant problem for many people. At this time, I don't know of any workaround in CS6 for this bug other than to break text up into smaller blocks or use another more text-oriented application like InDesign. While I can't comment on future releases, your feedback on this issue is important to us, and I can say, "there's always hope"...
If you'd like to discuss this further, or send us a file that exhibits the problem, please contact me directly. My email address is my last name @ adobe.com.
Paul -
How to import a *.dmp file (exported from 10g) to 8i database?
Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas. -
HOW-TO Distinguish between file exported from Datapump and normal export
How to distinguish between the dmp file export from the data pump utility and the export utility in Oracle 10g and 11g .
Thanks,
SSLike Werner suggested, it's never hurt to try anyway.
use imp with SHOW=Y, if it works then Original otherwise Data pump.
Once you determined one file, there's good chance that the rest are same. I don't think previous DBA will go through the trouble by mixing data pump and traditional exp/imp. -
Illustrator error opening eps file exported from sketchup pro 8
When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened". If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Any thoughts on why I'm having this issue? Is there an eps version compatibility issue I should be aware of?
Hi Mike. Here is the screenshot you requested.
-
How do i send an html file exported from muse as email blast with images and live links?
My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
NicoleUnfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.
-
Lightroom and DxO: fix lens flaws in a TIF file exported from LR
Hi,
I'm in love with LR, I don't mind if people tell me that other Raw converter do a better job in demosaicing. Anyway some time ago a friend told me about DxO Optics Pro, I tried and loved the lens corrections. I thought I could prform those correction at the end of my workflow on a Tiff file exported from LR to DxO. No way! It seems that DxO doesn't recognize the lens used to shoot the image. It seems that LR and Camera Raw delete all the infos related to optics used. Any help would be appreciated.
Bye!I used the following command to swap exif data:
exiftool -all= -tagsfromfile DSC_0002.NEF -exif:all DSC_0009-2.tif
The TIF file contais less exif tags than the NEF (or DNG) file, and there is no tag about the lens used.
Here's what I get copying exif data from one file to another:
ExifTool Version Number : 7.70
File Name : DSC_0002.NEF
Directory : .
File Size : 5.7 MB
File Modification Date/Time : 2009:02:25 13:44:44+01:00
File Type : NEF
MIME Type : image/x-raw
Exif Byte Order : Big-endian (Motorola, MM)
Make : NIKON CORPORATION
Camera Model Name : NIKON D70s
Software : Ver.1.00
Modify Date : 2009:02:25 13:44:42
Jpg From Raw Start : 131072
Jpg From Raw Length : 725092
Y Cb Cr Positioning : Co-sited
Subfile Type : Full-resolution Image
Image Width : 3040
Image Height : 2014
Bits Per Sample : 12
Compression : Nikon NEF Compressed
Photometric Interpretation : Color Filter Array
Strip Offsets : 856404
Orientation : Rotate 270 CW
Samples Per Pixel : 1
Rows Per Strip : 2014
Strip Byte Counts : 5095416
X Resolution : 300
Y Resolution : 300
Planar Configuration : Chunky
Resolution Unit : inches
CFA Repeat Pattern Dim : 2 2
CFA Pattern 2 : 2 1 1 0
Reference Black White : 0 255 0 255 0 255
Exposure Time : 1/50
F Number : 4.0
Exposure Program : Manual
Create Date : 2009:02:25 13:44:42
Exposure Compensation : 0
Max Aperture Value : 3.5
Metering Mode : Center-weighted average
Flash : No Flash
Focal Length : 18.0 mm
Maker Note Version : 2.10
ISO : 800
Quality : Raw
White Balance : Auto
Focus Mode : AF-S
Flash Setting : Normal
Flash Type :
White Balance Fine Tune : 0
Program Shift : 0
Exposure Difference : +1.8
Preview Image Start : 8112
Preview Image Length : 24932
Flash Exposure Compensation : 0
ISO Setting : 800
Flash Exposure Bracket Value : 0.0
Exposure Bracket Value : 0
Tone Comp : Normal
Lens Type : G
Lens : 18-70mm f/3.5-4.5
Flash Mode : Did Not Fire
AF Area Mode : Single Area
AF Point : Center
AF Points In Focus : Center
Shooting Mode : Single-Frame
Contrast Curve : (Binary data 4160 bytes, use -b option to extract)
Color Hue : Mode1a
Light Source : Natural
Hue Adjustment : 0
NEF Compression : Lossy (type 1)
Noise Reduction : Off
Linearization Table : (Binary data 1412 bytes, use -b option to extract)
WB RGBG Levels : 555 256 388 256
Lens Data Version : 0101
Exit Pupil Position : 102.4 mm
AF Aperture : 3.6
Focus Position : 0x01
Focus Distance : 3.98 m
Lens ID Number : 127
Lens F Stops : 5.33
Min Focal Length : 18.3 mm
Max Focal Length : 71.3 mm
Max Aperture At Min Focal : 3.6
Max Aperture At Max Focal : 4.5
MCU Version : 132
Effective Max Aperture : 3.6
Raw Image Center : 1520 1008
Sensor Pixel Size : 7.8 x 7.8 um
Serial Number : No= 3005d534
Shutter Count : 31244
Flash Info Version : 0100
Flash Model : (none)
External Flash Flags : (none)
Flash Commander Mode : Off
Flash Control Mode : Off
Flash Group A Control Mode : Off
Flash Group B Control Mode : Off
Flash Group A Exposure Comp : 0
Flash Group B Exposure Comp : 0
Image Optimization : Custom
Vari Program :
User Comment :
Sub Sec Time : 20
Sub Sec Time Original : 20
Sub Sec Time Digitized : 20
Sensing Method : One-chip color area
File Source : Digital Camera
Scene Type : Directly photographed
Custom Rendered : Normal
Exposure Mode : Manual
Digital Zoom Ratio : 1
Focal Length In 35mm Format : 27 mm
Scene Capture Type : Standard
Gain Control : Low gain up
Contrast : Normal
Saturation : Normal
Sharpness : Normal
Subject Distance Range : Unknown
Date/Time Original : 2009:02:25 13:44:42
TIFF-EP Standard ID : 1 0 0 0
Aperture : 4.0
Blue Balance : 1.515625
CFA Pattern : [Blue,Green][Green,Red]
Image Size : 3040x2014
Jpg From Raw : (Binary data 725092 bytes, use -b option to extract)
Lens ID : AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED
Lens : 18-70mm f/3.5-4.5 G
Preview Image : (Binary data 24932 bytes, use -b option to extract)
Red Balance : 2.167969
Scale Factor To 35 mm Equivalent: 1.5
Shutter Speed : 1/50
Create Date : 2009:02:25 13:44:42.20
Date/Time Original : 2009:02:25 13:44:42.20
Modify Date : 2009:02:25 13:44:42.20
Circle Of Confusion : 0.020 mm
Depth Of Field : 197.49 m (2.01 - 199.50)
Field Of View : 67.1 deg (5.28 m)
Focal Length : 18.0 mm (35 mm equivalent: 27.0 mm)
Hyperfocal Distance : 4.04 m
Light Value : 6.6 -
Why won't .MOV files export from Lightroom?
Why won't .MOV files export from Lightroom?
The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob. -
Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty
1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library. -
Color shift when converting .mov file exported from Macromedia Flash
I'm trying to convert quicktime file exported from Flash into any other format using Quicktime Pro 7.0.4 and I get substantial color shift. Here's the picture:
http://img525.imageshack.us/img525/1518/screen3ov.jpg
On the the left is the initial file, and on the right is what I get. I've tried all codecs setting (targa, jpeg2000, animation) but no luck. Please help!I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.
-
Export 'flv' file straight from FCP
Hi,
I need to find a program to enable me to export straight from Final Cut time line to 'flv' file,as I need to save time rather than exporting from Final Cut and then to flv. Is there any program that does this?Hello there,
for Flash 8 video (VP6-E/S codecs) you would need something like:
*On2 Flix Exporter* - QT export component ($199)
http://www.on2.com/index.php?399
*Flip4Mac Episode* - Batch Encoder app with free Apple Compressor integration plugin ($395)
http://www.flip4mac.com/episode1.htm
http://www.flip4mac.com/pdfs/EpisodeCompressorQuickstart.pdf
For Flash 9 video (Flash Player 9 Update 3) you would only need Compressor (or Episode) as Flash 9 video no longer uses the proprietary On2 VP6 codec but standards-based MPEG4/AVC (H.264).
http://www.kaourantin.net/2007/08/what-just-happened-to-video-on-web_20.html
Hope this helps, Oliver -
720 progressive output from Sorenson Squeeze and Sony Z1 HDV
Hi
I have a one off project where I need to film some shots in portrait 16:9 for output on (lots of) 720p digital screens on their sides. I plan on filming this with a Sony Z1 camera in 1080i HD mode on its side and then down-sizing in FCP and converting to progressive WMV files with Sorenson Squeeze.
I know the Z1 doesn't really do progressive filming. Would it be wise to hire a camera that does support it natively for best results? Or would Sorenson Squeeze do a good job of de-interlacing to 720p for HD LCD panels? Plus, does anyone know of a bracket-type attachment to mount cameras at 90 degrees on a tripod?
Any suggestions or tips for best results would be much appreciated, and thanks in advance for any help!
Message was edited by: doug m
Message was edited by: doug mTom,
I don't think that your issue is with the Z1. I think that it is with HDV footage in general (nasty format and all) but you don't want to hear that so let's work on getting you going.
1) You do need some sort of external monitor. YOu have several options, Cheapest is to buy a Matrox MXO and an Apple or Dell 24" monitor. Other options include cards from AJA or Blackmagic. If you are doing everything in HDV I would recommend something from AJA or BM that way you can capture to a more easily editable format like DVCProHD. Do a search for Kona, Blackmagic or capture cards aadn you will find a wealth of info.
2) for this footage you need to look at the original tapes on an HD tv and see if you are seeing the same thing. This will determine if it is a compressor issue.
3) How low did you set your bit rate? Max should be below 7 or some DVD players will have issues.
4) in DVDSP you should be able to bring in your QT ref file and it will encode it for you. If it won't import it makes me wonder if it is being exported properly. Are you going out of FCP by FILE>EXPORT>QUICKTIME>with current settings, and check Make Movie Self-contained?
One more thing, in this process you are not working with film, others here may be more harsh about this but you are using video so let's call it what it is.
K
Maybe you are looking for
-
How do I make a logo designed in Illustrator hi-res for print use?
e
-
Iphone 6 plus screen scratch without dropping the phone
Purchased my iPhone in November and a good case for it minus the screen guard. After 2 months of use, there is a thin line which cannot be felt from the top till middle of screen. Taken it to an authorized service center but received a denial stating
-
Hi All, Is there any field named as parent profit center? I know "parter profit center" related to profit center accounting. But never heard and seen about parent profit center. Please let me know exactly. Thanks and regards,
-
Hello I'm installing kernel netbook I used yaourt but it won't install i get this error. Could some one help me thank u. linux-3.2/usr/initramfs_data.S: Write failed linux-3.2/virt/kvm/Kconfig: Write failed linux-3.2/virt/kvm/assigned-dev.c: Write fa
-
Hi All, Im trying tu use kron funcionality, but I got problem. My config (just testing one): kron policy-list test cli configure terminal cli interface Loopback 50 cli exit kron occurrence test in 1 oneshot policy-list test and I get this result from