Flv files too big?

i have three video files on my website. each is 1 minute long
and each is just under 5 megs big. is this an acceptable size for
the videos or are they still too big and require further
compression? what is considered acceptable? i am finding that when
they play they play fine (streaming from my website) however they
are not reliable in actually starting. sometimes it takes 2 or 3
clicks before they start to stream. i am not sure why this is
happening. i thought it could be related to the file size
thanks !
angus

I don't understand why so much detail on my process is needed. It's just a file conversion to view a movie I downloaded. I do have FCE and work in it, but not in this case. It just seemed that most Streamclip discussions were in this thread area, so I came here. Anyway, thank you. I will try what you suggest, but I do think it's a useful feature for these programs to clearly show, when possible, final converted file sizes based on what parameters have been chosen. For example, the newest Quicktime photo conversion window features a slider that allows you to SELECT the file size for .jpg. I always needed something like this and was delighted to see it appear in the new version. It's the great thing about Apple - user-friendliness.

Similar Messages

Is an 8.7GB file too big to import into iMovie 9?

Is an 8.7GB file too big to import into iMovie 9? I am using iMovie 8.0.6 on a Macbook Pro running OS 10.6.8 on 2.26 GHz Intel Core 2 Duo with 2 GB Memory. I can't get my movie file to import into iMovie...any advice would be much appreciated!

When you import into iMovie, your video is converted into DV format. This uses 13 GB per hour of video. So the first thing you have to do is make sure you have 26 GB free on your hard drive, plus another 10GB free for OSX to perform, plus 10GB free if you plan on burning a DVD.
iMovie has non-destructive editing. If you have used any part of a clip and discard the rest, that entire clip is still saved in your project - unused but eating up disc space. If you use no part of a clip and discard the clip, then the clip can go in the trash and you get back disc space. So...
If you import 2 hours of video (26GB) as one clip, and only use 2 minutes, your 2-minute segment retains its 2-hr source in memory. 2 min = 26 GB.
One thing you can do is set the iMovie preferences to automatically create new clips every 3 minutes. (2 hours of 3-min clips = 40 clips.) This allows you to find the 2-minute segment you want and delete all of the unused clips. Say your 2-minute segment comes from 2 of these 3-min clips, so you keep 6 minutes of source footage and delete the rest. Clips that are entirely unused will be completely deleted and give you back disc space. At .65 GB per clip, your 6-minute project is now only 1.3 GB, and you've just regained 24.7 GB of disc space.

Published site won't load. Are my video files too big?

I'm a video editor and have published a site through iWeb. I have about 8 movie files on the site. The site never fully loads. Are my video files too big? If so, what would you recommend the average MB's should be?

You need to use a movie player that doesn't require the files to load with the webpage...
http://www.iwebformusicians.com/Website-Movie-Video/Poster-Movie.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/QuickTime-Javascript.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
.. or a playlist/jukebox player.
http://www.iwebformusicians.com/Website-Movie-Video/Movie-Jukebox.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Backup file too big using Disk Utility

I need to back up my 160GB Mackintosh HD on my imac OSX 10.6.3 (Snow Leopard) using disk utility. After a short period of the imaging process I get a message saying 'file too big'. What can I do to resolve the problem? My external drive is 1TB with 500GB available.
I've tried using Time Machine but this seems to want to wipe my external disk.

You may or may not be able to use the Disk Utility in the /Applications/Utilities/ folder to shrink the single partition and create a new one in the free space.
(76132)

Exporting a sequence and getting an Error file too big message

I have tried to export a sequence using Quicktime conversion. It is a two minute clip and I keep getting an "Error, File too big" message. Does anyone know what can be happening?

What exactly are you exporting to? Settings, codec, data rate? What drive are you exporting to? How is it formatted?

File Too Big to Open?

I have a ~26 MB CSV file, which I had wanted to open in Numbers 09. But when I did, Numbers displayed the Opening dialog box, and then said that the file can't be opened because it was too big. How can I work around this and open the CSV file?

CSV is a text file, so if it's a spreadsheet, it likely exceeds the 64K row limit for a Numbers table.
You might be able to open the file in TextEdit, then split it into smaller pieces which you will be able to open.
Or it may be possible to open the file using either NeoOffice or OpenOffice.org, both of which can be downloaded from their respective websites (linked to the names in this line).
Make a copy of the file to try these with.
Regards,
Barry

Archived file too big for DVD

Hello
I have created an archive file that looks to be 7.4 GB - obviously too big to fit on one DVD. Is there a way to put this file onto TWO DVD's, or do I have to try and make two files that are smaller in order to put them on DVD?
It doesn't look like the archive file is much smaller than the originals put together - there was an M4V (iPod movie - 163 MB), a disk image of the same (iDVD - 1.77 GB) and the original file from iMovie (6.6GB). I'm afraid that even if I split them up into two files, I won't be able to get the iMovie file onto one disk just by itself!
I really want them on a disk rather than an external hard drive - at the rate my son is making these movies, I'll have no space left really soon! Please help! Thanks.

"SuperDrive" is just Apple's term for their internal DVD writers. In the last couple of years, SuperDrives have been updated with DL-burning capability.
A "regular" single-layer DVD has around 4.7GB of capacity, which roughly translates to 90 minutes of video.
Commercial movie DVDs have long used the DL format, meaning that they can fit twice the length of video onto the disk. You will specifically need "DVD +R DL" disks to record this amount of data. Apple sells them, but you should also find them at good office stockists.
DVD players/readers can read both formats.
Matt

Keynote - files too big to email/share, looking for PDF resolution solution

Has anyone worked out how to change a keynote presentation PDF resolution when preparing for sharing? The file I get is too big to email (6 photos gave me 55mb) as it appears to retain the input resolution of the embedded photos?

If using Acrobat 9 Go To Document>Reduce File size.
If Using Acrobat X or XI to tot he tools sidebar and use Optimize for Web Distribution.
If you do not want to fool witht he pdf in any way then download Adobe Send Now app and use their free service or subscribe for a year for a whopping $29.95.
The free version allows you to upload files upt to 500MB there may be limitis to how many files you can upload it sends an e-mail to the parties you want to download the files and they simply follow the link and it downloads.
The paid version allows you to upload files as large as 2 GB and gives you 20GB of storage. I immediately myself purchased the paid version.
If you hppen to upgrade to the cloud then you get the paid version free.

TS3276 server says file too big to send-file says 33MB server says 44MB

I cannot send a short video which is 33.1 MB in the description but the server won't process as it claims the file is too big(44MB) and it can handle only 41MB.
I've tried to compress it but still reads as "too big to send"

You seem focused on the difference between 33 megabytes binary and a 44 megabytes transfer — the messages have to be encoded as SMTP mail was never intended as a binary transfer mechanism — mail servers transfer printable text messages — and the text-encoded attached binary files are inherently going to be larger than the original files.
You're going to have to raise the mail server limits (which requires administrative access to the mail server), or find an alternate means of transferring the file — mail servers aren't very efficient at large transfers, large files tend to blow out mail server storage quotas, and blow out mail files. Or chunk up the file into smaller files, send the chunks independently, and then concatenate the file remotely. (There are tools around to do this — at the command line, have a look at the zipsplit tool — but I'd generally discourage this approach as it adds effort and complexity to the process.)
The usual approach is a file transfer service. Dropbox or SpiderOak or some other file hosting or file transfer service are the most common approaches here, and are also more efficient than the overhead involved with large attachments sent via a mail server. Many of these file-hosting services offer more than enough storage here, and often as part of a free service tier.
Some folks can and do run their own file-hosting services, but that generally involves configuring and managing a server system and the associated network connections.

Export file too big! I need help.

I am trying to export a text book from pdf to word. How do I export a file if it is too big? Is there a way to export half? Or export certain pages? I am not computer savvy so this may have an easy solution.

If the PDF file you're starting with is larger than 100MB, ExportPDF won't be able to convert it.
To convert a file of that size, you'll need Adobe Acrobat. You'd need Acrobat to divide the file into smaller chunks for ExportPDF anyhow, so Acrobat is probably the best solution for you. You can learn more about Acrobat here: http://www.adobe.com/products/acrobat.html
-David

Cropping creates HUGE file--too big to save

Hi--
I'm running PS CS3, and have developed a problem with cropping using the crop tool.
When I crop an image like this:
4368x2912 pixels (pixel dimension 72.8M)
12.133 x 8.089 inches, 360 pi
file size 250,960 KB
I get a file like this:
5760 x4320 pixels (142.4M pixel dimension)
16x12 inches, 360 pi
file size 2,145,800 KB
This file is then too big for PS to save.
What is going on? I haven't changed anything with PS, except adjusted RAM based on advice from Tim Grey. I found a posting that said to reset preferences, so I tried that, but it didn't do anything.
Thanks!

Perfect!
This worked. I went back and double checked my units--they were correct, but maybe there was an errant space or something. Anyway, thanks very much for your help!
n

.mov file too big for posting on my website

i am using i-photo to create a slideshow. i've used photos that were 72 dpi on one slideshow and photos that were 300 dpi on another. i have about 55 photos on each slideshow. the 72 dpi slideshow is actually larger than the 300. what gives? i can't post either on my website for display. they are both too big (over 42mb). can anyone help me out on this and maybe give me some insight?
thanks-
i-Mac Mac OS X (10.4.7)

Hi GinaP,
Yes, the 55 images equaling 42mb sounds right. What is the limitation that you have?
There might be 2 ways to reduce the total file size.
1: You may need to reduce the resolution (dimensions and file size) of each image. You can do this in iPhoto, select image, use the Share > Export, make sure you choose the 'Scale images no larger than: insert a smaller dimension that original. This will reduce resolution which in turn will reduce the file size. I would create a new folder on your desktop, name it appropriately and export into this folder. Afterwards, just take the folder and drop into iPhoto, will import and make your slideshow... BTW - you can batch export and resize
2: If you want to keep same image dimensions but need to reduce the file size, you will need to use export function again, but then you can open your images in PREVIEW, use the SAVE AS option, you will notice a 'Quality' slide, move this to the left to 'shrink' images... and again import and make your slide show.
It's alot of work, but I know of nothing else you can do to reduce file size w/o downloading another App...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Cannot transfer via bluetooth - transfer failed - file too big

I have been trying all evening to transfer songs from my laptop to my blackberry and it keeps telling me the transfer has failed because the file is too big. I have only tried to transfer one song I would understand it being to big if I was trying to send loads. I am new to the blackberry so please try not to be too technical.
Many thanks in advance.

wasimbutt wrote:
Thanks for the reply, do u have any idea of this feature becoming available through and update or may be an app ???
I don't work for HPalm, and the company has historically not revealed future plans/updates.
What is it you're wanting to send? You can always email attachments from one phone to another, but not programs.
I've been using a program called "Wifi Media Sync" to send files from my laptop to my Pre2 and TouchPad wirelessly. Still not phone to phone, but pretty cool anyway!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

MP4 video file-too big to email

I have a MP4 file that is 72.4 MB. It is too big to send it via email. How do I do it?
Thxs

How do you use ichat?
Add the recipient to your contact list and then drop the file onto their name in it. The Skype method is the same.
(51174)

Lightroom reports file too big

Problem with panos stitched with PTGui. Three D2X NEFs converted in Lightroom then opened in CS2, saved as TIF files and stitched to one 75MB image in PTGui are then reported by Lightroom to be too big to import. The resulting TIF file opens happily in Photoshop and other applications (ACDSee, Neat Image etc). It makes no difference if I then save it as JPEG (takes it down to 15MB), Lightroom still refuses to import. I have a feeling that this is not related to file size (15MB JPEG?)
Anyone with a hint?
Peter

Your are welcome Peter, I believe that it is only in recent times that PS moved to 30k pixels so we might have to wait until the other bugs/features are sorted out !!
Enjoy LR !!

Flv files too big?

Similar Messages

Maybe you are looking for