FLV intro - smooth transition to timeline

Hey eveyrone,
I have an FLV intro that plays on my first frame. After the video is complete, it goes to the second frame in the timeline. The final frame of the video mathces frame 2 in my timeline, BUT there is a small hiccup at the end of the video when trantsitionning to the timeline! How can I have this 2 blend? So that the end of the video and the 2 frame (where my navigation resides) are seamless?
Thank you!
Rafa.

Make sure your flv exactly matches with the content size there is not even fraction of a pixel difference as that can cause it to jump.
Also you can use some transition on FLVPlayback control like fadding out.
And fade-Inin the actual content at the same time this will be a work around.

Similar Messages

Need smoother transitions between .swf's

I have a website I am doing that has a flash intro with
music. I then have the site itself which is also designed in flash.
These 2 swf files sit on 2 different .html pages with an action
that tells one frame to go to the next "page".
My client whats it to be a smoother transition, almost like
its going within the same .swf fles. I tried to save the flash .fla
and just importat and try to figure it out how to import the
intro.swf file into my main flash site and to just add it at the
beginning. Bu this didn't work either...

Try using a fade-in or a fade-out
located in transitions
between the pics
play with the timing of the fade
this helps between all pics
but adds alot of time to the movie.

Handling Smooth Transitions in SAP Lumira Chart Extensions

I assume render is the function that does all the drawing logic for a specific Chart Type in VIZ Packer Utility. How do we handle any updates to the Data and do a smooth transition from the initialized State of the Chart to a final State as defined by Data.
Currently I see render function as to Initialize SVG and implement some code that would display the Chart with initial Data.
-- When the Data gets updated - I don't want to call render function which initializes my SVG again
Is there a different function that makes use of the SVG that was initialized in render function and then apply updates to it that would create a smooth transition from Initial to Final State.

Hi,
I believe your question has been answered in your duplicate post here: http://scn.sap.com/community/lumira/blog/2014/06/28/cool-chart-extensions-demonstrated-at-lumira-codejam-vancouver#comment-502992
In summary, You need to use VizPacker to package the extensions, then deploy those extensions to C:\Program Files\SAP Lumira\Desktop\extensions\ . this process is covered in detail in the supporting documentation SAP Lumira SDK (Chart extensions). See here: http://help.sap.com/lumira#section4
regards,
H

Smooth transitions betwen audio

im ptreety new to the FCP world and am having trouble getting a smooth transition between two bits of audio (first bit is in sync with person on camera - second bit is voice over with other video) they are supposed to sound as though they were recorded at the same time (ie the guy you see talking at first is just continuing to talk over the other picture) but they weren't... the second section of audio was recorded at a different time so the level is a little different and the background hiss is different - and that's the biggest problem... when you hear that sound of nothing change its really easy to spot the cut in the audio... how can i smooth out this cut without having 'atmos' recorded at the locations when they were shooting?
can i dissolve the two bits of audio or something?
help! this is driving me crazy!

Get a third track of room tone sound put it under both clips to start. Yes, you can do audio dissolves. Slect the edit point on the clips and hit Command OptionT to add a dissolve. Also, you probably want to look into the audio filters for some EQ, etc. This is the basic way to get started. You might not be able to "cure" the problem, but you should be able to get it to sound a lot better.

Preset imports and "smooth" transitions

Good Morning!
I have 2 things that i needed help on:
1) I always struggle with each update of Premier. I always lose my presets (effects) that are both in "My presets" and My favorites. I don't know why these don't transport with the update, but they are gone again. I did take the time to export my old presets in 8.0, but now in 9.0 I don't see where it gives me the option tyo import anymore? Can someone help?
2) Once I either get my back my presets or create new ones, I struggle wit that perfect transition. Anotherwords, I always seem to drag a prest to my picture and then when it plays, the frame is frozen for a split second, then effect executes, then effect stops. I always have to go in and edit the effect and drag the "button" for rotation or scale to either end of the frame to get my smoothness? So ..
- Is there a way to create a preset and have it know I want the scale or rotation to start at the very beginning and end at the very end?
- And is ther a "best way" to create the movie. Like do I add transitions first and then drag presets, or drag presets and then add transition. It seems if I do either or, my prest gets truncated in the image.
Thanks for any help!!

For the "smooth Transitions," one must set the In & Out Points of the Clips, so that there are adequate Handles, to allow for the Transitions. If one does not have adequate Handles, one of two things will happen, depending on the structure of the Clip:
If there are no more Frames, then the last one will be repeated, as a Freeze Frame.
If there are Frames, but they are in the next "scene," then material that was believed to be removed, will appear in the Transitions.
This ARTICLE will explain Handles in detail. The secret is to move the In and/or Out Point, to allow for adequate Handles.
Good luck,
Hunt

BEGINNER: Best Framerate for smooth transitions

My animation is jagged in movement.
What would be the best framerate for a smoother transition?
Right now I'm using the default 12FPS
Should I make it higher or lower and if so, by how much?
This is the animation:
http://www.tarilynquinn.com/site/SE_INDEX.html
Help would be much appreciated.

Higher framerates do make for smoother animations -- up to a point. Depending upon how many things you have going on and the computer in use a really high frame rate can cause some machines to choke and then it will look worse than a lower frame rate.
I recommend getting a rate that you work at and that you tailor all your designs to meet work at that rate. That way if you need to combine assets later they will be compatible. And you will have a feeling for the rate.
At work we are now doing everything at 24 and at home I use a 30. I think both of those are pretty reasonable and that most machines these days will be able to handle those rates.
Of course there are always times when for a very specific reason I might use a different rate, but I only do that knowingly and not just because, "eh, seems like a good idea."

How do I do smooth transitions between clips?

After trimming clips, what type of effects do I need to use for smoother transitions? I tried several types of video transitions, for example Crossover Dissolve between the clips. But I want to show as if I never did any cuts or clippings even though I have done it. Did I make this clear?

You may want to ask yourself, "Why do I want to use a transition?"
As you think about this question watch any network TV program and look for the transitions. You will generally find very few transitions in a professional video. Those you do find will generally be dips to black rather than cross-dissolves. You will generally find cross-disolves being used only where the editor wanted to give a sense of time changing.
This s a situation in which less is more. I believe that a 1 sec cross-dissolve draws more attention to itself than would a 0 second cut.

Smooth transition from (warp) Stabilized clip to the other clips on the timeline

When I link my (warped) clip to the other clips (that are running fine, and are not stabilized), right in the transition (both at the beginning and at the end), the clip "jumps", which I guess is sort of logic.
How do I connect the warped clip to the other clips on the timeline smoothly? I tried to nest both clips so they start out "fresh", but it still doesn't look right. Tried all alternatives in the Warp section.
Thanks

But you said "transition" - first word, second line?
If you stabilise and export a clip with handles, you can then apply transitions without problem, to the new clip.
Applying the stabiliser to the entire 2 minute clip, if that is what you mean, would not work. There would be too much motion overall for the stabiliser to achieve an acceptable result.
The best results are always achieved with short sections of clip, so the total motion over the timescale of the clip is limited.

Help with Flash smooth transitions

Can someone please tell me how I can make a Flash movie like
this one
here
where it transitions smoothly from one image to another.
I have been using Flash for a while at a basic level, but my
attempts at such movies always seem to be jerky. When I create them
I use a simple motion tween using fade in and out with Alpha
between the images as that's what I have read in tutorials to
create these. I have also tried increasing the frame rate as I read
that could help, but it still doesn't look right. I have put a copy
of my latest attempt
here and you can see
it's juddery between transactions, and I don't even really want the
fade effect, I just want it to transition smoothly between images
as in the Broadmoor example above.
Do I have to use Actionscript to make a more professional
movie like the one linked to? If so, I have never used Actionscript
before so would appreciate if someone can point me to a tutorial
etc.
Thanks a lot in advance for any help or suggestions.

Are you fading the second image in as the first image is
fading out? If so try layering all of the images in the order you
want and fade just the top image out so the one underneath appears.
If you want to have it loop just have the very first image appear
again as the last image and then use actiomscript to jump back to a
frame where the same image is fully loaded at the beginning... I
hope this makes sense. If not please let me know and I can try to
explain a little better.

Can't drag transitions into timeline

Hi, I am trying to drag dissolves into the timeline but they won't take. Can anyone help?

markyj2000 wrote:
Though i think it's a shame, because I film quite tightly so often only have the amount of clip that I need.
You don't really loose much if anything. You only need to move the in on one and the out on the next 15 frames for a one second transition. Plus the 30 frames are not gone, they are part of the transition and can be seen, depending on the type of transition.

Obtaining smooth transitions in iPhoto'09

I am preparing a slideshow in iPhoto'09 and have put the images in sequence at the top of the 'play' window.
I then adjusted the settings to give a slow dissolve on all slides. However whilst the majority of dissolves work smoothly several, four, jump quickly to the next slide. I have clicked 'Fit the slideshow to the music'.
Any thoughts on why some slides don't dissolve slowly? This didn't happen with my previous show in iPhoto'08.
Message was edited by: rrphot

The 'jumpy' ones are the same format and size as the others. There are four 'jumps' out of a total of 20 image changes. The sequence starts and ends with smooth dissolves. I have 32 Gb available on the hard drive. I wonder if the four 'jumps' could be on images that I imported after the first batch had their settings applied? In that case how do I apply settings to the total images? In the settings menu I have clicked 'Fit slideshow to music' and ticked Transition 'Dissolve' on the 'All Slides' menu.

Plymouth and SDDM smooth transition

Hello guys
I switched my desktop environment and desktop manager to Plasma 5 and SDDM recently. It looks totaly beautiful. While changing my DE and DM I've decied to use Plymouth to complete my new awesome looking desktop . It works very well with paw-arch and my custom written theme. However, I could not find a way to make transition from Plymouth to SDDM smoother.
When Plymouth quits SDDM starts but in the time gap between two processes I'm facing with TTY1 and kernel outputs.
Do you have an idea about wheter there is a way to make this transition smoother?
Thanks for any help
PS: I'm adding my config & service files to help:
mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES="setfont"
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
# Diabled usbinput
HOOKS="base udev plymouth autodetect modconf block filesystems fsck keymap consolefont keyboard efistub_copy"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
SDDM.service file
[Unit]
Description=Simple Desktop Display Manager
Documentation=man:sddm(1) man:sddm.conf(5)
[email protected]
After=systemd-user-sessions.service [email protected] plymouth-quit.service
[Service]
ExecStart=/usr/bin/sddm
Restart=always
[Install]
Alias=display-manager.service

up because I would like to do the same.. using GNOME atm without GDM (but I often switch to a openbox or compiz-standalone setups)

Can't apply transitions to timeline

This is new because it worked before. Now I drag the transition (like a dissolve) over to the clips and it bounces back; nothing happens. I try through Edit, the same thing. It simply will not allow me to put a transition in (and, yes, there's more than enough media on both sides).

You going to have to show us some screenshots of the Timeline so we know what you're working with and what you're doing. Zoom into the timeline at the edit point and make sure there is no gap clip there.

Does dragging transitions to timeline work in Premiere Elements 11?

Hello,
If you drag a transition in the timeline between two clips, before you release the mouse button, you can place it at the left, centered or at the right of the clips (the cursor looks like a kind of flag and changes depending on the position between clips).
Theorically this should be the same than changing Alignment in Transitions Adjustments dialog box but it doesn't work to me, wherever I release the mouse button it selects Between Clips Alignment.
I'm reading Adobe Premiere Elements 11 Classroom in a book and in chapter 7 Creating Transitions it says "In the test software used while writting this lesson, where you dropped the transition did not affect the alignment shown in the Transition Adjustments dialog........".
It seems that this functionality hasn't been improved since Premiere Elements 11 was being tested.
Does anybody can tell me if this option works correctly, please?
Thanks

marcos
I should be ready soon to post my links to very detailed information on Premiere Elements video and audio transitions.
But of immediate report..
If I have two trimmed video clips on the Premiere Elements 11 Timeline and I drag the Curtain video transition to either Left Clip, Between Clips, or Right Clip, the Transition Adjustments Pop Up will appear. I find no case yet where I can stop it from appearing with the placement of the transition. And, under the circumstances described (2 trimmed clips), the auto "snap to" will be to Between Clips, and that alignment will not be changed when I click Done on the Transition Adjustments Pop Up.
All of that is in accord with the Adobe Guidelines that it has published for what to expect for transition alignment for trimmed and untrimmed clips.
If I wanted Left Clip or Right video Clip alignment, I would have had to have selected that option before I clicked Done to the Pop Up.
Do you see anything significantly different from that when you are doing the same with trimmed video clips and video transitions in Premiere Elements 11?
Thanks for the follow up.
ATR

Can I download or use an Imovie intro video transition to use in premiere?

The people I work with really like this one intro transition they use and want me to recreate it but i don't have a Mac. Are there even things like it on Premiere? i haven't found any yet

iMovie is Apple... Premiere is Adobe... the two companies are competitors... so to answer the question in your title... I do not know of any way to use an iMovie transition in Premiere
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests... be sure to be specific about what it is you want

FLV intro - smooth transition to timeline

Similar Messages

Maybe you are looking for