FLV plays on every server except the one I need

I have a flash video, with its swf, html, flv, playback
controls swf, and AC_RunActiveContent.js, all referenced with
relative links so it shouldn't matter where I put it. I tried it on
three different servers and locally. It works just fine on two of
the servers and locally. But on the third server--the one that
matters--it doesn't play. I just get a blank page in the browser,
although 'view source' shows that the correct code is there. Other
flash videos already on this server (created by someone else using
I-don't-know-what method) do work. The file was created in Flash
CS3 and uses the Flash 8 player. The video was encoded using the
On2 VP6 codec.
Is there something that should be set on the server level to
allow newer flash videos to play?

You state that other "Flash Videos" on the same server work.
Do you mean SWF's or FLV's. If other FLV's already work, then it is
something with your encoding, or a pathing issue. If you mean
SWF's, then it is likely that the FLV MIME-TYPE needs set up on the
server. In this case Google FLV MIME-TYPE and you will find the
information necessary.

Similar Messages

  • ATV1 visible to every computer except the one that it syncs with

    Still having troubles with my ATV1 sync'd to a WIndows 7 machine. After numerous resets and deleting of preferences and links, I finally go tthe APpleTV to appear in Devices - re-linked the ATV to iTunes and synchronization started. Several hours later, the ATV was about 3/4 full with video and music, things looking good.
    I started to play a few podcasts on the ATV, and all was good. Changing selections, the ATV froze and went blank. Nothing. On the Windows side, it still showed that it was syncing, but it was stuck on the file that was transferring at the time of the freeze, and never went beyond that. So, I unplugged and restarted the ATV, and likewise shut down iTunes on the WIndows side and rebooted.
    Now, the ATV is visible as a device to any computer on my network except the one to which it is linked. I can share a library from another computer, no problem. But, the ATV just doesn't show up on my Windows machine. If I go to Preferences, under AppleTV I can see that it says the ATV1 is "syncing" but it never shows up in Devices and the ATV1 doesn't acknowledge that it is connected to the master linked library.
    This has been the (intermittent) problem all along... every so often I have to wipe and start over because I can't connect it any longer to the master iTunes library. This has been going on for at least 4-6 months - have had the ATV1 connected to Windows iTunes since it first came out in the stores, but never before with this amount of frustration..
    Any suggestions?
    mh++

    Take a look at this -> Recovering your iTunes library from your iPod or iOS device
    Short version: iTunes will transfer the purchases made from the iTunes Store on your iPhoneh to your computer. It treats all other music and video syncing as a one-way street, to comply with copyright laws (wont sync stuff not purchased through iTunes from your iPhone to your computer).

  • Pages works with all other docs, except the one I need to work on.  From my downloads folder I can preview the entire file, however whenever I try to open it, i get the "opening" pane filled to ~90% and then the SBBOD.  Only file it does this on...help??

    From my downloads folder it recognizes the file as a Pages document, I can preview the entire document, but I try to open the file in multiple ways (from right click, to open from preview, from inside pages) and it refuses to open.  The "opening" prompt comes up, fills ~90% and then I eventually get the SBBOD.  It will fail out if given long enough to think it through or i need to force quit.
    OS- 10.7.5
    Pages: downloaded from App store when i purchased my mac mini last fall. fresh update.

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • I just synced my iphone 3gs after downloading the Safari upgrade, now my iphone won;'t open any apps except the ones loaded on my phone when I got it.

    I just synced my iphone 3gs after downloading the safari update.  Now I can't open any apps except the ones that came with the phone.  I have tried rebooting, turning it off and on. 
    When I select the icon, it goes to the page then returns to my screensaver.
    It was working well before the update and sync with my Acer netbook.  Have never had any problems with itunes store or downloads.

    this happened to me with my iPhone 4. I researched the problem and found this :
    "The reason this happens is because every time a downloaded app is opened it checks for your itunes password for validation that you are authorized to open that app (as it may contain personal info). From time to time the iphone 'forgets' your itunes password. You can fix the missing password by syncing the iphone with itunes or downloading an app from the app store and entering your password that way.”
    And to fix it, all I did was download a new app, or delete a current one, I used Facebook, and re-download it.
    Hope this helps

  • How do you get Itunes to go the free radio station list, I'm not talkiing about the one that lists the price next to the song that's playing, I'm talking about the one that lists about 50 diffrent genes.

    How do you get Itunes to go to the free radio station list, I'm not talking about the one that lists the price next to the song that's playing, I'm talking about the one that gives you 50 diffrent genes to select from?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    But answering quickly, if you mean the streaming stations, click the Internet item:
    If you don't see that item, checkmark "Internet Radio" in the General preferences in iTunes.
    Regards.

  • Use a different SSO Server than the one specified during install.

    Hello,
    I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
    However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
    Could anyone that has done this before, help me out? Thanks in advance...

    Hello jlubbers,
    That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
    I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
    Thanks again.

  • Question: I think I made mistakes using several different id apple. How can I cancel all of them except the one I would like to maintain ?

    Question: I think I made mistakes using several different id apple. How can I cancel all of them except the one I would like to maintain ?

    From Here   http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • I just got my MIDI to USB cable, fired up Garageband.  I clicked the basic lessons, tried Play.  But the lesson guy is playing.  I'm the one who needs the practice.

    I just got my MIDI to USB cable, fired up Garageband.  I clicked the basic lessons, tried Play.  But the lesson guy is playing.  I'm the one who needs the practice, not him.  Please help.  I don't know what I'm doing.

    G35Guy:
    Well, if that's the case, you must have a different finish on yours than I have on mine. Either that or you are extrordinarily careful when using it. Mine literally scratches when using a microfibre cloth. I would really like to know whether yours is somehow different. It would really piss me of if some people got a good quality exterior that doesn't scratch and some of us got the opposite. Did you try holding your player under a light to see if there is anything. You may just be looking at it in bad lighting. I find it hard to believe, unless your unit has a different type of plastic cover, that it hasn't received any type of scratches. Can you take a picture of it's It probably seems as though I don't believe you. That's not the case. Its just that I was so careful not to scratch it last night and it got scratched anyway. I have read of similar experiences by others who have the Vision:M as well.
    I wish I could return mine and get a different color, it really upsets me that a $300 item that is meant to be hand held and used heavily scratches this easily!! If anyone from creative is reading this, I would like to know what you plan to do about it! I didn't pay all of that money to have this player look like Sh*t when I am only using it the way it was intended and am being very careful at that!
    John

  • TS3988 When i update my iphone to ios 6.1.3 I can not restore my data neither from icloud nor from my device.How can I restore again. I do not have any backups except the one on icloud.

    When i update my iphone to ios 6.1.3 I can not restore my data neither from icloud nor from my device.How can I restore again. I do not have any backups except the one on icloud.

    What happens when you try to restore from icloud?
    instructions here, under line "restore from icloud."
    iOS: How to back up and restore your content - Support - Apple

  • Deselect radio buttons except the one that execute change

    Hey!
    Im curious how to improve this code;
    if(this.rawValue == true){
         radiobtn1.rawValue = 0;
         radiobtn2.rawValue = 0;
         radiobtn3.rawValue = 0;
    into a function that unchecks all radio buttons except the one that you checked as true.
    Thank you!

    I put radio buttons on the stage drag-and-drop style, rather
    than have them generated at runtime, and no I don't have any code
    to remove previous instances. I'll try adding code to add and
    remove those as the script runs and see what I come up with. I'm
    still an incredible newbie, so even though I know what I want to
    happen it takes me a while to figure out how to code it.

  • Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

    Hi,
    I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
    Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
    Any ideas? Thanks in advance!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • How can I uninstall the cc programs I don't use without uninstalling the ones I need and the cs6 versions?

    How can I uninstall the cc programs I don't use without uninstalling the ones I need and the cs6 versions?

    Creative Cloud Help | Install, update, or uninstall apps is the official Adobe link... I do NOT know if you may select individual programs

  • I just updated iMovie to 10.0.2. while attempting to import clips from my camera every clip shows up in the window EXCEPT the one I want to download. Its on may camera but won't show up why?

    i had just updated imovie to 10.0.2. While attempting to import clips from my camera the computer froze so I tried to eject the usb cord hooked to my camera. Even though it said it was OK to do so, when I pulled it out I got a message it was done prematurely. When I restarted the computer and tried to import again, evey clip shows up in the window EXCEPT the very one I want to import. I have no idea why and Ive tried everyting( restart, turn off, etc) nothing works. The wanted clip shows up fine on my camera but not in the imovie import window. please help

    How much free space do you have on your hard drive?
    LN

  • Server Exception : The data exceeds the length

    Hi All,
    I am updating a MDM record through API . modifyrecord . I am changing almost 50 fields in record and then modifying . I get an error , the data exceeds the length . How can i know which particular Field is giving error . It just says the data excced the length but which fields is not shown in error .How to get the field name .

    Hi Govind,
    I assume u r using ABAP.
    Check if the data type u have assigned for all the fields is correct.
    Specially check for integer fields also.
    MDM_GDT_INTEGERVALUE only takes data upto 4 bytes  but if it exceeds this limit u need to use MDM_GDT_DOUBLE.
    Server exception mostly happens when some parameter is not entered correctly.
    Regards,
    Neethu Joy

  • How to insert company logo and page number on every page except the first page?

    Hi, I am creating a newspaper and I've inserted the page number and company name on every page using the master page (you know the basic method).
    Problem is I don't want the page number or the logo to appear on the first page, how can I do this?
    Or will I have to copy and paste it on each page instead...? I'd rather not.
    I'd appreciate any help I can get.
    P.S. I'm using CS5 and obviously I'm talking about InDesign.

    Make another master and apply it to the first page.
    Take care, Mike

Maybe you are looking for