FLV Video Error!! Help! Presentation Tomorrow

Hey;
I have a presentation in which my second slide contains an FLV video from YouTube. I have set the start and finish times of the video, and it previews perfectly... However when I launch the presentation, when it gets to the video it hides keynote (similar to pressing "H" during the show)... then I have to click on the keynote presentation icon in my dock again, and the show advances to the slide after the video.
When I view the presentation just on my MBP the video loads fine... But The issue occurs when I am connected to a projector?
Little help?
(Trying right now to convert to .Mov using iSquint.... but I wont have a projector to test with until a few minutes before my presentation... any other ideas to help?)

Nope, that would be my best idea. To use iSquint. Make sure you've got 1.5.2, because there's a bug in earlier versions.

Similar Messages

Correct size for swf/FLV video files in Presenter 7?

HI,
I'm trying to use Presenter with some screen capture and
other video an I cant seem to get the video to show up at the
correct size. If the video is scaled for screen capture it looks
really bad. I can build new resources or export to any type or
video/swf or FLV but I don't seem to be able to control how to get
this to work once in comes into presenter. Real video is OK as that
scales well.

Personally, I record in Camtasia at 800x600, then have it
resize to 640x480. When I import that file into PowerPoint, it has
a huge white border around it, and I have to resize the video until
there's no white border left.
It's still quite large on the screen, and the fact that
PowerPoint / Presenter seem to resample/rescale the video seems to
lower the quality some, which is why I often use heavy zoom effects
within Camtasia.
I've tried using Captivate for creating the videos, but
honestly, it's faster and provides a better end result if I'm using
Camtasia. What software are you using?

Cap 6.1 - Error with .flv videos in quiz

I have 5 .flv videos in a quiz and they used to work flawlessly. I had some install/uninstall/subscription issues and inadvertently updated captivate from 6.0 to 6.1 (dont know if this is the issue) and ever since I have had errors.
The error is easily noticable in preview mode as the video overtakes the quiz and doesnt let you see any of the quiz questions. When I publish to Adobe Connect (the quiz is for an elearning webinar) everything works fine except for 2 major errors: 1. You cannot interact with the video skin (ie play/pause/playbar/etc.) 2.There is a "full screen" option in a connect pod that is sharing a file, if you click this the video goes full screen and only goes away with the esc key, once it goes away the "submit" button no longer works so youre stuck and cannot complete the quiz.
I can send the file to anyone who wants to take a look, the error should be pretty evident when you preview. If you preview in captivate, the video shows up and blacks the quiz out, if you preview in web browser it gives you the issues that I have in connect. I believe they are the same errors in different formats.
As a temporary workaround I have:
-removed the skin and just looped the video to remove any interactivity with the video
-instructed the presenter/host to advise the 40 person elearning class to NOT press "full screen" under any circumstances
However I am still looking for a solution.
Any help would be greatly appreciated. I have a class that starts at 7 ET/4 Pacific
Thanks
Corey Hammond

Once I got the project all set again, previewed successfully both in captivate and in web browser, I went to publish in connect. When publishing in connect it gave the same error I had a month or so ago:
"Failed to publish your project to the Adobe Connect Server. Verify your network connection and try again"
(see my other thread: http://forums.adobe.com/message/5510327#5510327)
Now this was frustrating coming across this again when I thought this problem was solved a while back. I went into a chat session with an adobe support person and screen shared and his conclusion was that a couple slides were problematic. I again scrapped the whole file, re-did the project, and published to connect. It worked and I had successful publish. The problem? I went to test it in connect/preview/web browser and it has the same bug as before (as mentioned in the first post of this thread). Needless to say, I almost threw my computer out the window.
I have now gone full circle TWICE experiencing both issues at opposite ends of my laps and it is starting to get frustrating. I am thinking it is a bug, might never have a solution, which is disheartening.
Anyone willing to take a stab at it is welcome, im at my rope's end...

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

Please help me load an .flv video that has been embeded onto a web page

Hello there,
I was hoping someone on this forum could please help me with one specific problem that I am having. I would like to embed the a flash player into an html page, and load the video from a service that has the streaming video provided.
This is the context of the situation...
We have created a site that was to be used on a showroom floor (no internet connection) and loaded the .flv videos at the local root level for the site.
Now however, we would like it to be an online site. I have been able to use the flash "jw player"to load videos to play using the shadowbox javascript, but when I try to embed it onto a page and have it play, it isn't working and I am not sure why.
Below is the code that is currently working to load the videos on the local root level.
Might someone have any ideas on what I need to replace to have it load the videos from the streaming service?
I would greatly appreciate any assistance that could be provided. I can also provide a URL if it would help.
I would GREATLY appreciate any assistance provided.
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("player1","9.0.98","expressInstall.swf");
</script>
<object id="player1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<object type="application/x-shockwave-flash" data="player.swf" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<p><a href="http://get.adobe.com/flashplayer">Get Flash</a> to see this player.</p>
</object>
</object>

Hello,
Thanks a lot for the reply. However, I am pretty confident that the jw player supports the streaming video option, but as I mentioned that I was able to use it as a popup using the shadowbox javascript before. After doing a bit of investigating on how the videos are hosted, I am using "progressive download" method for these videos.
I think the problem is that the player.swf is hosted on my website server - and the videos are then hosted on the media hosting service. I think that the player needs to be located on the media hosting service, and then embedded onto the page along with where to point to the .flv video. Does that sound right?
If so, the paramater I am using to embed the player as I mentioned in my original post is simply:
<param name="movie" value="player.swf" />
does the "value" then have to change to the http:// address for the video player.swf that would then be hosted on my video hosting service?
Little help?
Please let me know if there is anything I can provide to clarify the issue.
Thanks
M

Why with Firefox 4 fast download of a flv video gives error whilst with IE it is possible but very long

If I download a flv video I get a message saying fast downloading is not possible and asking to eliminate the file from the list of downloadable files. If I do so: message of error!With IE the announced size of the same size of video (1 hr)the size announced is 2 Gygab..the time taken is 4 or 5 hours and the final size of the file is about 200 Megab. 3 months ago announced and final size 200 Mb and time 20 min.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Please help my flv video file works perfectly localy...but its not visible in remote ftp why??

hi All,
Please help me. my flv video file works perfectly localy in
my computer...but its not visible when i uploaded the flv html and
flash files to ftp?
thanks in advance

This suggestion worked to see the hidden folder(s). Thanks very much, but I feel like I am miles away from moving my ipod music to my new computer and getting it all to work. Here is why...
1. First when I plug the ipod in, in disk mode, to the USB slot it shows up as a K drive for a minute or so and then disappears. itunes keeps opening, asking me to sync (which will erase all my music on the ipod!) and the K drive (ipod) vanishes.
2. I pod help says to drag the itunes file out to the desktop and then drag the itunes file on the ipod into the "my music" file within documents and settings. However, there is an "ipod control" file (was hidden) and within this there is the following: artwork, itunes (with 13 subfolders of its own), device, and music. So do I just drag the itunes file inside ipod control into My music? Or do I drag the whole ipod control file? or other?
3. Additionally there are K drive (ipod) files for calendar, photos, contacts, notes, and ipod control (was hidden). I don't care about any content in the first four, but are they needed to operate? Do I drag these over also to the My music file?
Whew, very frustrating. Thanks, Ric

HT1473 Is drag to drop songs or videos still present in itunes. When i updated itunes i couldn't drag and drop any song or videos pls help.

Is drag to drop songs or videos still present in itunes. When i updated itunes i couldn't drag and drop any song or videos pls help.

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resultings numbers and we can verify what the next steps to take.
B-rock

FLV video issue , please help

hi everybody, im an actionscript 3 programmer, with some
experience but im quite desperate with an issue that i can´t
solve, please help help, if you know the solution to my issue my
email is [email protected], thanks so much, i explain now
* im building an application in which i have to show many flv
videos dynamically, i have tried with both systems, with the
FLVPlayback component being created dynamically and with the
simpler netconnection and netstream etc way, the thing itself works
no probs , the videos get created no probs at all, now the problem
is that videos stop playing just after they start, or they play a
few times and then they freeze or sometimes they dont even load at
all, this happens both locally and remotelly
* i read about the MIME video/x-flv issue, i have apache in
my computer so i set the MIME right there and i still have the
problem, so it doesnt seem that the MIME issue is the problem, even
more:
* first, to provide context, i have a PC with Windows Vista,
and Flash CS3 Professional, and Flash CS3 Video Converter and Riva
FLV Encoder, locally i have Apache and PHP installed, remotely a
fasthosts server
* i have found that if i encode the videos without audio!
they almost always work, but here comes the desperating thing, if i
encode them without audio, they always load, but they still freeze
sometimes.... so if videos have audio, often they dont even load,
if they dont have audio, often they work perfect and play, but
still after playing 2 times maybe they freeze and they dont play
more
* i have executed my application in the flash environment, in
a browser locally, locally in localhost through apache, and online
in a fasthosts server;
* i thought i had found something when i realized that if i
encoded the videos with no audio they seemed to play well no probs,
but i have found that even then they will freeze and stop moving
after a while often
* to encode i have tried many things! the Flash CS3 video
encoder with different settings, and also the RIVA FLV Encoder
* i have also , thinking that the kind of video source could
be important, i have encoded a couple of different sources with
same results, i encoded uncompressed AVIs and also wmvs
please anybody can help, as im quite desperate with this,
thanks very much, my email is [email protected]
all best and thank you
Jav

hi again, i have noticed also that sometimes videos play well
in Firefox, and not in explorer, why could this be? ive heard of
other people with similar problems but didnt find a solution
anywhere, some tests work perfect in firefox online and not at all
in Explorer, any idea?
its all coded in actionscript 3
thank u very much
Jav

Help w/behaivior button error _ presentation doc

Hi I'm learning action script but new to trouble-shooting.
set up a button on main presentation page of my flash 8 pro
presentation file.
used the behaivior:
>screen
>go to slide
then chose slide numbers. (works fine in a plain, new doc)
but on all of my ten buttons I get the following errors:
**Error** Screen=presentation, layer=buttons, frame=1:Line 4:
')' expected
if((this.01 != undefined) && (this.01 != null))
So trying to decifer this....went back and "named" each
botton thinking it was instance related. but still won't nav from
the ten individual buttons I've made to the ten different "slide"
pages.
any help you may be able to translat this to give me a place
to start to solve this....my file complete...looks good..and will
nav thru the two arrow buttons I've made "go to previous" and "go
to next" ....but the buttons that are supposted to allow a use to
go to any of the ten pages does nothing.
Thanks for your help

Hi Neo,
Having taken a 3-day, all-day actionscript class, I realize
how indepth this prgm is, and I know this is a simple thing, and
totally operator error.
heres the whole error window:
**Error** Screen=presentation, layer=buttons, frame=1:Line 4:
')' expected
if((this.01 != undefined) && (this.01 != null))
**Error** Screen=presentation, layer=buttons, frame=1:Line 4:
')' expected
if((this.03 != undefined) && (this.03 != null))
**Error** Screen=presentation, layer=buttons, frame=1:Line 4:
')' expected
if((this.02 != undefined) && (this.02 != null))
Total ActionScript Errors: 3 Reported Errors: 3
I've only assigned behaiviors to the first three buttons. The
individual "slides" in the flash 8 pro presentation are named
simply: 01, (for first slide) 02 (for second) 03, etc...I can see
them in the code. The instance names when I click on each "slide"
are also 01 (for first slide) 02 (for second) etc... The wierd
thing is the arrow keys. They are duplicates of the same buttons
that the numbers are, and they work with the "next" and "previous"
behaiviiors. but....also weird, I made a new (simple, clean, no
rollover) button on the "master" presentation page, and used the
>screen >go to slide feature....and it still did not work. I
thought it the buttons...but...now not sure...
any thoughts?

Download helper no longer works - icon is there but it does not recognise flv video on any site - not a PC guru so easy help needed !!!!

I have only just started to use Firefox as I got very tired of IE. I watch a lot of flash/flv videos on many different sites and sometimes like to download some of these (which I could do on IE but couldn't here). I downloaded the add on "download helper" which was great and worked really well and easily but all of a sudden it now no longer works (the icon is still there but it won't recognise any type of video form any site at all - and I have no idea at all how to repair/fix it.
I am not a PC expert or guru so any kind of easy step by step help will be greatly appreciated (I don't want to have to go back to the horrible IE please!!!!!)

Does it work in the latest Release version - Firefox 31?
''Firefox 32 is currently a Beta version; not all add-ons are compatible with pre-release Beta versions of Firefox.''

Firefox updated, Video download helper no longer works, no error msg. I have uninstalled both Firefox and VDH, reinstalled, VDH still does not work, Why

Video Download Helper does not work after most recent update. I have cleared cache and cookies, uninstalled both Firefox and the helper,that has not corrected.When Firefox does an update are the "vendors notified so they can see if their product needs changes in order to be compatible? This may sound like a stupid ?, but it makes sense tome. Telling me to download something else, in my eyes is not REALLY solving the problem.

Don't uninstall 36. Just download and install 35 over top and you don't lose any data. I already did and everything works just fine. But I did remove VDH first.

MSI P7N SLI - PC Wont Boot - Video error code but changing graphics card no help

((Apologies, I think this should be in the forum for Intel Core 2 Duo/Quad boards))
Hi. Brief description of the issue.
Last Saturday there was fan noise. I ignored that, left the machine on, went out. By Sunday morning the machine had turned itself off. I opened it up, identified the problem as the graphics card fan, failed to fix but put the PC back on figuring I'd have to see about a new card soonish.
Later on it had turned itself off again. Got to bios with a system32 config error. I figured that was why it'd been shutting off and went through the long process of manual recovery from that. Turned the computer on, all good, played games.
Until I thought to check the GFX temp... 133 degrees Celcius. Turned it off right away, ordered replacement card - which has now arrived.
But the machine won't boot at all. I get one long tone then two short. This is the same with both the old and the new cards. Blue light comes on, all the fans come on, then the beeps.
But the 'long' isn't long like if it was a RAM issue. I'm googling AMI bios post codes and seeing 1 long + 2 short is a video error, but also that '3 beeps' is a memory problem.
I've swapped my RAM sticks around and tried each stick individually and get the same beep code.
I've reset the CMOS by holding in the button on the back for 5 seconds, with the power cable unplugged and after discharging the capacitors.
The only other suggestions I've found is that it could be a failure of the PSU to power the card. But it should be giving ample power.
Now I am stuck for ideas.
MSI P7N SLI, MS-7380
Intel Q6600
Antec Neopower Blue Modular PSU
Zotac 8800GT [OR Asus GTX 260 212]
OCZ Platinum 2GB (2*1) DDR2 800
Western Digital HDD
LiteOn DVD Rom
Windows XP

With a 94000GT (no power connector from PSU) the machine is now running.
But there's still a problem somewhere (and that's a pretty poor graphics card I don't want to be stuck with) so I'm still keen to find out what to do, or what's wrong.
My 650W Antec with 2 12 volt rails should have no issues powering the other cards.

Why flv videos don't show in version 5.3?

I have bought Keynote 09 5,3 few days ago
when I want to show an old presentation (Keynote old version) with flv videos, don't show the images. Only works audio!!! ??

If these are "modern" .flv files that use H.264 video then you'll need a helper app like Perian to play them using QuickTime.

Flv video not playing in AIR application

Hi everybody,
i'm building a tutorial with flash catalyst and since the 20 states limit i've split it up in different swf files that I import and show in different states.
One of these swf (which i built with Catalyst as well) is supposed to play a flv video, and it actually plays it if i run it alone.
The problem comes when i build the overall tutorial: it works perfectly with the "run project" command in Catalyst and with the run-local version but the video won't play if i try the AIR application.
Does anyone have any suggestion?
NB: the "asset" directory created with the AIR application installer does contain the flv file (i didn't have to put it there manually)
Thanks in advance for your help,
Giuseppe

Hi Giuseppe,
what I do is:
1. create a file using Captivate
2. i place a .flv video in this file
3. save the file as .swf
4. then i go to dreamweaver and put the swf on a html page.
Now:
when viewed in a browser, everything runs fine.
when i pack this page into an air application (in dreamweaver) the video does not appear,
instead I get this "Connection Error"
I do not know a console or log file.
However, I learned that there is a .xml file located in the same AIR folder that you publish in.
In this .xml file there is a setting :transparency. in order to playt a .flv file this must not be be "transparent"!
(i read this somewhere in the net)
hope that helps
I will talk to a professional programmer, if I have any news, i will let you know
Claus

FLV Video Error!! Help! Presentation Tomorrow

Similar Messages

Maybe you are looking for