FLV Video Goes Black

Hello,
I have a FLV video playing through the Media Display
componet, however, when the video is finished playing, the image
goes black. I've tried reseting the video, adding an extra frame at
the end of the FLV video, moving the componet off the stage when
finished...nothing seems to work. How can I get rid of this black
box?
Thanks,
-Dan

Nickels55,
Thank you so much for weighing in on this. I really
appreciate it.
I've put the.swf on the web along with a quicktime version to
show how the players handle the video differently. I'm hoping to
emulate the quicktime way of doing things. Basically, the quicktime
player stops the video at the end and leaves the playhead there -
which is nice if you want the final frame to integrate seemlesly
with the site. The flash player is moving the playhead back to the
beginning of the video. That's what I hope to stop. I'd like to see
the playhead stay on the last frame.
You can see the two videos
HERE. But I warn
you, it's obnoxious having two of the same video on one page, so
turn the speakers down. Yuck.
Thanks so much for your willingness to look into this!!!!!!!!
Jake

Similar Messages

HT1551 I'm able to watch netflix's for about 15 minutes then the video goes black but I still have audio.

I just set up my Apple TV. I'm able to watch netflix's for about 15 minutes then the video goes black but I still have audio.

Is it always at the 15 minute mark?
To make sure it's not a connectivity issue
What is your connection via speedtest.net?
Check istumbler or netstumbler for interference
Make sure DNS is set correctly (settings - general - network - configure DNS - automatic)

MP4 videos going black when skipping foward.

Essentially when I play the video it works fine, but if I click forward on the video it turns black. The audio still plays but there's no video. Also, if I click back to the start the video it's still black. The only way to fix it is to start another video then going back to the video with the problem. This only happens on 2 videos, I'm wondering if the files are corrupt, or if there is a way to fix it.

What do you mean by saying the screen is going black?
Do you mean the whole monitor or just the Viewer in FCP X?
Try these general troubleshooting strategies even if you've already done them.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.

Video goes black.

After I record a video, and I edit it and add some effects, when I watch it, the video just goes black. Is there any way to fix this?

I too have this problem. I strung together several video clips and all was well. Then I added a photo to the end and modified the Ken Burns effect. Once I did that, I could no longer view the video, just the photo. I deleted the photo, and now the view screen is black. When I skim a clip in the project window, the clip animates in the window, but the view window is still black.
Now, most of the clips in my event window are gray. When the cursor hits a clip in the events window that is not gray, but not in my project, it goes gray, but the image returns when the cursor is off the clip.
Anybody have any idea what is going on here?

Cap 7: project with an .flv video goes to Media Encoder

I have a Cap 7 project that includes a slide with an .flv video embedded. When I try to publish as both .swf and HTML5, the Adobe Media Encoder appears. I have no idea what to do with the encoder, if anything, and the publish process just stalls. Is the .flv video the issue? There is a note in the Cap 7 "publish project as HTML5" help that states that .flv files that are created using On2VP6 codec only are supported in the HTML5 output. Am I missing something?

FIXED!
Thanks to some points in this thread, I have solved my problem.
It was the KNOLL LIGHT FACTORY plug-in. I removed it, and the Adobe Media Encoder now works on my system. I assume that DYNAMIC LINKING between the CS4 apps also now works, but have yet to test that.
This also explains why my CS4 suite works on my MacBook Pro; I never installed KLF on my laptop.
Now I need to tell RED GIANT SOFTWARE about this problem, and either get a solution from them, or a refund.
Thanks. You can add this solution to your collective repertoires in case a future OSX user encounters this exact problem.

CBS Video goes black, repeats video

We watch CBS news stories using the CBS app on Apple TV. Normally the app will automatically begin playback of the next story when one story is finished. For the last month this has worked for the first two stories only. When the third story/segment should play, instead the second story will repeat but this time with no video. And the Apple remote no longer responds. The only fix has been to restart Apple TV by unplugging the power cable.
Equipment is MC572LL/C, iOS 6.2.1 Vdeio

Greetings SCV Must Win,
If you are having an issue with your Apple TV's software not functioning as expected, and you have restarted the Apple TV and the issue returns, the next step would be to reset all settings on the Apple TV. This manual explains how to do so (see page 31) -
https://manuals.info.apple.com/MANUALS/1000/MA1607/en_US/apple_tv_3rd_gen_setup. pdf
If this step does not produce the desired result, you may need to restore the Apple TV. The process is on page 32 of the same manual.
Thanks for using Apple Support Communities.
Be well,
Brett L

Motion Menu Goes Black When Button Is Added

Sorry for the double-post - I accidentally posted in the PP column first go round.
I'm creating a Blu-ray in Encore CS5.5. I built a short (1:30) video to loop as a motion background for the main menu. I import the video and audio as assets, and attach them to the menu (they're encoded as Blu-ray H.264s, but I've also tried a Pro-Res 422 master file).. When I preview the menu at this point, both the video and audio play fine. The minute I add a button however, the video goes black (audio still plays fine, and button is visible). Ultimately, I'm trying to create an original button (not a generic one included), but it happens with either button.
Note - the menu video fades out to black, and in from black, so the first frame/loop point is black. When I reset the loop point to somewhere in the middle, whatever frame it lands on becomes a STILL IMAGE in the background while the menu plays. The music still plays fine and the button is still visible. Also an FYI: The highlight layer is not a full-frame graphic - just a line to "underline" the word "Play" when the button is selected.
I've searched all over the internet and while it appears to be a common problem - I haven't found a solution that's worked yet. Here's what I've tried so far:
Thrown up a generic button (included with Enc).
Dynamically linked menu to PS.
Deleted generic button "group" and created new button group.
Deleted *locked* background layer & created new, unlocked background layer.
Opened After Effects and minimized it in bg.
Emptied cache in Encore.
Reset loop point to :10:00, then reset it back to 00:00.
Cold-booted entire computer.
Used a Encore library menu & attached the assets to that background.
Anybody have ANY ideas???
Thanks!
Tim Walton

Hi All -
Ran through all the steps again, and this time it worked!
Tim

Preview monitor goes BLACK when I pause.

I'm using a 15" Macbook Retina with the Nvidia 650M GPU, and up until the 2014 version of CC was released I could use the CUDA acceleration. Now, I cannot use it without the video going black the second I pause. Help is appreciated.

Tyler,
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Trash preferences
Ensure Adobe preference files are set to read/write
Delete media cache
Remove plug-ins
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Create a new user account with Admin privileges and launch Premiere Pro from there.
Disconnect any third party hardware
Reboot
Report back if anything here worked for you.
Thanks,
Kevin

FLV and exe files going black

I can get the FLV files to play as long as I don't tell the
projector files to play full screen. If I do, as soon as it hits
the first FLV file the projector file goes black and when I hit
escape the file has quit running. The script that I have tried for
full screen is as follows...
flash.system.fscommand("fullscreen", "true")
and
fscommand("fullscreen", "true")
The script I have for my two instances of FLV files (i
resized them) is as follows:
import fl.video.*;
// Video component instance name
var flvControl = display;
var flvSource = "rel-wdb019sr-022_x.flv";
var flvControl2 = display2;
var flvSource2 = "Wedding2.flv";
// Loop the video when it completes
function completeHandler(event:VideoEvent):void
flvControl.seek(0);
flvControl.play()
flvControl2.seek(0);
flvControl2.play()
flvControl.addEventListener(VideoEvent.COMPLETE,
completeHandler);
flvControl2.addEventListener(VideoEvent.COMPLETE,
completeHandler);
// Set video
flvControl.source = flvSource;
flvControl2.source = flvSource2;
Does anybody have any advice?

You can with Jugglor, see the FLV player here.
http://www.flashjester.com/?section=faq&cPath=14_53#385
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

Screen goes black when hooking up to TV via mini-DVI to video adapter...

Hello,
Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
Anyone have this issue? Know of a fix?
Thanks,
Kristin.

If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

When ever i go to watch videos on youtube or any other apps, the screen goes black. you can hear the video but you cant see anything. how do i fix this?

i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.

When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF

When I click on video it is stuck on one tv show, when I click 'done' the screen goes black so I can't access any other video that I downloaded from iTunes onto my iPad 2. How do I troubleshoot?

The video on my iPad 2 is frozen on a tv show, although it will play the tv show until the end. At the end, when I click 'done' the screen goes black so I can't see the other movies that I've downloaded. I've shut down a few times but it reverts to the same thing. How can I re-set the video feature or do what is necessary to get it working again?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Satellite L405D-11V - Freezes and screen goes black when watching video

Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
Thanks

Hi buddy,
Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
What operating system you are using on your Satellite L405D?
To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
In my opinion you should try updating the display driver. Maybe its causing the issue
If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
Explain your problem very detailed. I think everything can be clarified then. :)

MacBook Pro retina display goes black while outputting video through HDMI to external monitor??

I frequently connect my MacBook Pro to my 42inch Panasonic TV to watch movies/videos. I use VLC media player for all my playback. The problem I'm running into is that when I put VLC media player into fullscreen mode on my external display, my retina display goes black (I can still see the finder bar at the top and when I mouse down the dock appears but the rest of the display shows all black. If I click on Safari it will open but I can't see it on my MacBook display unless I take the external display out of fullscreen mode.
I would still like to be able to do things on my MacBook while video is playing. I've played around with the display settings but they're pretty limited and I can't figure out how to get it to work the way I'd like. I've seen people having up to 3 or 4 displays hooked up, I'm just trying to hookup one. I would consider this a severe limitation of OS X if I'm not able to separately manage the displays. Hopefully there is a setting or something I'm just not seeing. Thanks.

Yeah, fullscreen mode still doesn't play nice with multiple monitors. The common workaround is to stretch the window out to the edges of the screen instead of using actual fullscreen mode.

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

FLV Video Goes Black

Similar Messages

Maybe you are looking for