.flv will not show in edit mode
I have imported a flash file according to the directions on
Captivate Help. All I get is a grey box on the screen and cannot
make it play with the playbar. I originally set it to auto play, so
I should not need to press any button for it to play on the slide.
It is set as a progressive download. When I tru to preview the
slide, it does nothing. Any thoughts on why this is happenning? I'm
new to using Captivate and may be missing something....
If someone can help, I will be greatly in your debt!
Thanks.
Welcome to our community, Kelly
Sorry. No answers quite yet without first asking you more
questions.
* You mention .FLV in the thread title, but later just say
"Flash". Is it truly a .FLV file?
* You may wish to review fellow Adobe Certified Instructor
and Adobe Community Expert John Daigle's "ShowMe The Demo" site. I
think he has some information there that could help.
Click here to visit the
site
Cheers... Rick
Similar Messages
-
I upgraded to Firefox 12.0. Now, when I attempt to reach my Gmail calendar, it only comes up in read-only mode. I temporarily went to Explorer. the calendar comes up in edit mode without issue. What should be my next steps to resolve this?
Glad it worked, Thanks for posting back. It is a simple solution but often overlooked. I have often myself wasted time on looking for more complex solutions.
-
I updated from ios 5.0.1 to 5.1. Midway through the update itunes crashed. I got it all working again and ever since I have been stuck in a recovery loop. DFU mode works fine, but when I go into recovery mode (yes I am doing it right, yes I have tried pwning, tinyumbrella, etc.) it still just gives me a white screen (I am not getting the plug arrow and itunes icon screen that shows up when you are in recovery mode). I am a huge fan of hacking, mods, and jbs, BUT have never done any on the iPad, (found it pointless).. nevertheless, I am stuck thanks to apple in a white screen and a nonworking iPad. If anyone has any ideas that does not include jbs, updating, restoring, restoring with internet off, restoring in DFU, I would gladly appreciate it. I would take it to the apple store but it was a friends and I didn't purchase it. My friend had the issue formerly and they had no idea what to do at apple (they usually try DFU, restore, and then have nothing else to tell you.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
My premiere elements 12 will not open in edit mode. it says incompatible display driver
what are the compatible drivers for premiere elements 12 on windows 7 os
1st, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
2nd, Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2 -
When I mirror a presentation on my iPad air 2 to a TV the content will not show in presentation mode. It will show in edit mode.
Same problem here - 80 gb classic and same thing happened to me this week - plays fine alone - when hooked to computer says it needs to be reformatted and then when i try to reformat i get error 1415 can't reformat - this is bs and im not shelling out for another ipod - why would it work fine but when connecting it to windows suddenly not work> I think Itunes 10 has got some issues
-
Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.
Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information. -
Find out if the content will be rendered in "edit" mode programmatically
I need to use redirect to send user to different page for certain reason. I use HttpPortletRendererUtil.sendRedirect() to accomplish the task. It works fine. The problem is I do not want it redirect in page modes other than "show" mode. Is there a way to know if the content will be rendered in "edit" mode? Or is there other way to accomplish the task?
I tried and in both "show" and "edit" view getMode() return 1. I notice that the urls to access "edit" view is different from the one to access "show" view by an additional parameter _mode=16. It is not available to portlet. Probably portlet is not suppose to know the display mode.
-
I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
== This happened ==
Every time Firefox opened
== I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.
-
Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
so this morning i connect my ipod and it will only show up as a generic hard drive icon labeled "NO NAME." there are no songs stored in the ipod itself and it will not show up in itunes. it was working two days ago and was almost completely full. can anyone help?
Message was edited by: Jason GriswoldIf yu tried everthing here:
iOS: Device not recognized in iTunes for Windows
Then try another cable
Then another computer to help determine if youhave a computer or iPod problem.
If iPod problem than an appointment at the Genius Bar of an Apple store is in order. -
Elements 5 - Organizer will not show thumbnails
Recently moved Elements 5 to my new laptop - On the laptop the organizer will not show photos in any view other than single picture. Anything smaller shows the hour glass [also shows on the collections icons]. I deleated the first catalog transfer and have been only using new photos transfered from my D-50. It will run full screen shows just nothing smaller that a single picture view. I also uninstalled and reinstalled the Elements software.
I have unchecked the filer checker.
Systems is a Vista home premium 64 bit, 4 gig of ram, Lenovo ideapad laptop 5800T processor. Version 5.0.2
Any ideas?
AlanI can't be sure this is the problem, but ...
Is this the first time you have opened PSE5 on this computer? If so, it truly is generating the thumbnails. Your statement about how in single image mode the thumbnail appears is a symptom of this phase of the operation. Just let it run. It will finish, and the problem will be gone. -
When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
IPhone 1.1.4 will not wake from sleep mode
Hi all,
I have an iPhone with 1.1.4 firmware. The problem that I have is that the phone will not wake from sleep mode by pressing the "home" button. I have to press both the "home" and "sleep/power" buttons and hold them for 6 seconds for the phone to restart. I did restore the phone twice - did not solve the problem. Then, one day, I left it charging for about 3 days and when I came back it started working fine. Not for long though( After about a week of normal usage the wake up problem came back. I don't know what to do. I don't think it's the software problem, since I did complete restoration 2 times.
If the phone is connected to a charger or computer - it wakes up fine.
Thanks, Gene K
Message was edited by: riminirimini,
When you've restored the iPhone, have you tried setting it up as a new phone? This would truly eliminate software as a possibility.
If setting it up as a new phone doesn't correct the issue, it's probably time for service: apple.com/support/iphone/service/faq/
Hope this helps,
Raleigh -
Punctuation will not show up even after render
I'm trying to add punctuation (like "." and "?") to my projects but it will not show up in the project and even after I render the movie. Can anyone help me fix this???
There's no good reason that a properly made typeface should not work.
What typeface are you using? There are a few, mostly obscure typefaces that don't have all characters present. In that case, missing characters will be replaced by a box. Is that what you are seeing?
You can confirm the exact contents by looking at the typeface in FontBook, with the View mode set to "Repetoire".
What version of LiveType? If you are using LiveType for a Final Cut project, there's no need to render a movie if your LiveType is version 1.5 or newer. Justy import the project file -it can be treated exactly as if it were a video clip -
Rezound keyboard will not show up
I am having trouble figuring out why my keyboard will not show up in any window that requires me to type. I have looked in my settings and tried to restart the device with no luck. Please help, sending smileys is getting old. Thank You
I can understand why you are having trouble figuring that out, kdnbry84.
Have you tried to put the device in Safe Mode http://bit.ly/100XEDP to try it out?
Please keep me posted.
TamaraH_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
How to generate the output of a BSP application in PDF format?
Hi, I need to modify one BSP application, which generates its output in the form of PDF. I have checked all the methods in the bsp pages and its corresponding controller class's. I couldn't find any relevant method, which deals with generating the ou
-
Error message while trying to run combo update
I get the following error message when trying to run the combo update. "You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update." I tried with both 10.5.7 and 10.5.8 and I get the same me
-
FCP crashes, and opening and saving projects take too much time
Since my upgrade to FCP 5.0.4 I’m having trouble on several aspects of FCP. I am using an Xserve raid storage, connected via fiberchannel to an Xserve with 10.4.4. The editing computers are connected via fiberchannel and Xsan to the central storage.
-
How to specify OAS instance in deployment descriptor
Hi I've got OAS 10.1.3.1.0, where exist home, home1, home2... instances. In JDev I've developed web app. and deployment descriptor for it. How to specify correct instance in depl. descriptor? Thank you
-
So I bought this brand new Macbook Pro only two months ago, and already I'm experiencing issues with the video and Internet Connection. When I try to watch video, it plays for a few minutes, then completely stops, though it is buffered and loaded com