FLVs have no audio

Since questions are rarely answered (or perhaps even read) in
the
Flash Media Encoder forum, I'll try again here...
None of my FLVs, created with my Flash Media Encoder, produce
any audio at all. However, other FLVs given to me play in my SWF
just fine with audio. So, I know the problem lies within my
encoding process.
Anyone suspect what I'm missing? The app's documentation has
no troubleshooting advice regarding audio issues.
(PowerBook G4 • OS 10.4.9)

If you remove the first 8 flv files, do the last two now play
with
audio? If so, the previous flv files were likely causing some
problem.
If not...
Just something to try. I don't know why things would stop
working after
x number of flvs are shown...
Erik
Wedgiey wrote:
> Is there a limitation to captivate and flv files? I have
10 flv files in a
> captivate document. 5 of which are linked from one
starting place through
> branching ( which may be causing the problem? ). Anyway,
my audio goes out
> when viewing the published version after viewing 8 flvs.
The remaining 2 flvs
> will display, but have no audio. Anybody have any idea
what's going on here?
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Similar Messages

  • FLV embedded with Audio

    I'm creating flv files from videos which include audio which
    must remain. I'm creating the flv files using Sorensen codec as
    suggested before in Studio 8 for Flash 7 (company requirement). The
    flv files must be embedded since streaming is not an option. There
    will be no other audio in the flash file (fla/swf) file other than
    that which is already in the video.
    When embedding, the warning comes up that if the video is
    embedded and there is sound that there MAY be problems with the
    audio. The problem is that the audio plays for a short period and
    then stops even though the video continues. How do I work around
    this since the audio in the video must remain and there is no other
    audio being using in the swf file?
    Thanks,
    Bob

    so what is the best solution to have video & audio in
    sync with flash animation? What's interesting is that I found that
    Flash MX actually worked better for embedding video - audio and
    video were almost in sync. Even with video up to 2minutes they
    stayed close. When I upgraded to Flash 8, they were no were near
    each other.
    I've tried the streaming server option (Not Flash Media
    Server) but this is not the best solution as it is next to
    impossible to sync up animation with the streaming video. Anyone
    have any good answers or ideas?

  • Converting mp4 to flv with AME - audio is out of sync

    I am trying to convert an .mp4 file to an .flv (cropping it at the same time) using AME. The file crops and converts without error but when I play my .flv file the audio is not in sync.
    The audio is playing slower than the original mp4, but the video speed still matches the source file.
    Does anyone have any suggestions on what might be causing this?
    Here are my settings and operating system:
    Source Settings:
    1920x1080, 15 fps, Progressive, 00;02;20;12
    22050 Hz, Mono
    Output Settings:
    1644x1004, Same as source fps, Progressive
    MPEG Layer III (MP3), 256 kpps, Mono
    CBR, 1 Pass, Target 6977.80 kpps
    Windows 7 Enterprise
    Thanks!

    If you provide video file details, someone may be able to help
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Are you 100% sure that your editing sequence matches your video file... such as by using the New Item process?

  • Why do the MP4 files that I import to Premiere Pro CC have unsynced audio? (Resolved)

    I have identified and resolved.the issue. There is a bug with how Premeire Pro handles importing videos with variable frame rate.
    Community Memeber Walter.Johnson found a work-around at the bottum of this post, which also has the identification and submission of the bug itself:
    http://forums.adobe.com/thread/1110005?start=40&tstart=0
    I had to convert the video with "constant framerate" selected in handbrake. I'm believe the ffmpeg CLI equivilant switch is "-cfr" but I have not tested to be sure.
    I can now import videos with synced audio!
    I have recorded several hours of footage using a program called XSplit (a screen recording tool).
    The files are recorded in a FLV format and I then convert them to MP4 as premiere pro cant read then in FLV.
    In a MP4 format I can import the files into Premiere Pro CC and the video looks perfect, but the audio is unsynced. It is also unsynced in non-linear way so it is not something that I can simply unlink and adjust to compensate as it would have to be done manually every minute.
    If I import these same MP4s into other video editing programs they import perfectly fine and have no audio sync issues what-so-ever. I only experience this issue in Premeire Pro CC. I can even tested these videos in 6 different media players and they play perfecly fine.
    If I convert the files to AVI using ffmpeg or ffmpeg assisted tools it will not import into Premiere Pro CC and gives a "unsupported format or damaged file" error. Once again, this avi can be played and edited in several other programs no problem.
    Here are the details about one of these files:
    VIdeo Codec: H.264/MPEG-4 AVC
    Video: 1280x720
    Audio Codec: mp4a: MPEG-4 ACC LC
    Audio: 44100hz 63 kb/s tot , stereo (2/0)
    Anyone have any ideas on why the audio is becomming de-synced in Premiere Pro CC only?

    I'm happy to announce to you all that my "mp4 importing" issues has been sorted out. Now I import mp4 shot with the same Windows Phone 8 Device into Adobe Premiere Pro CS4. Only that for the moment, it doesn't play as fast as with ordinary player.
    But how did I get it to work, you may wonder;
    I simply installed Itunes on the system, I also installed an app called media monkey. I can't say which of the apps did the magic but the next time I tried to import mp4 files into Premiere Pro after these installations, it imported seamlessly.
    Obviously there's a link between the required codecs and the itunes itself.
    You may want to try it and hope it works for you.
    Kindly inform us if it works.
    Thank you all.
    Cheers.

  • How do I have two audio clips overlapping each other?

    I have a project where we have to make a music video, and I wanted to start working on the audio. I have an audio clip of the instrumental without me singing the song. I made a separate audio clip of me just singing the song because I wanted to be able to use autotune without changing how the music sounded. Now I want to play both clips at the same time but every time I try to do it the clips just change positions. Also I have another audio clip in the beginning of the video that I don't want changed or moved. I've tried googling and searching on youtube but nothing seems to help.

    Don't think it's on the Exchange yet (why would I ask for something I have configured already?). Maybe I'll add it later on, but don't understand me wrong, I fully respect the preference is different depending on the user.
    Just my common sense as analyst-programmer that tells me not to close something automatically by default (so only on first install). Your product, your call ;)
    Regards,
    K.

  • On my MacBook Pro, while using the windows side, I have no audio. Any suggestions

    On my MacBook Pro while using the Windows hard drive, I have no audio. The icon shows that I should (no mute insignia).  Any thoughts what I might do to correct?
    Thnaks.
    Tom

    Whoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right.  I do  wonder how to find that box before posting my dumb question.  The answer turned out to be checking the youtube volume control.  I turned that up and it solved the problem for Comast as well.

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    iTunes will only import music from your phone that was purchased from the iTunes store.  To transfer music from other sources you have to use 3rd party software, such as PhoneView.

  • 8.1 Pro install now have no audio and video play

    I have an older G60-443cl and changed out the HDD for a SDD.  Installed a new version of Windows 8.1 Pro.  Everything works but my audio and video.  The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume.  I went to my adminastrative tools and checked and the following is what i guess i should have:
    Open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Startup Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    I have all of the item but the top one Audio Service????     Help!!!!! Please!

    Hi @L1215 ,
    Welcome to the HP Forums!
    It is a grand place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio.  Drivers are showing as installed and working properly but you have not audio.
    When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System.  With this being said HP does not provide the drivers as it is an untested OS on your system.  OEM's may and sometimes do alter drivers to perform correctly with your system.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
    The best of luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

  • Is there a way to play video through HDMI and have the audio via the headphone socket?

    I would like to be able to play movies through the HDMI adapter to a projector, but to have the audio via the headphone socket to a separate audio system.  What I find is that as soon as I connect the projector via HDMI, the audio via the headphone sockeet is cut off.  Any ideas?

    Yes, there is a very simple way to get audio out through the iPad headphone jack even while connected to HDMI to play movies on a projector or TV.  In fact, I just did it last night for a presentation.
    With the HDMI adapter connected to the projector and your audio jack plugged into your iPad headphone jack, go ahead and start the movie. Then simply unplug the headphone jack and plug it back in.  The audio is now routed through the headphone jack again.
    I found I only had to do this once per session.  That is, Iwas able to stop the movie, go to the beginning of my presentation, wait the 20 minutes for the meeting to begin, and when I got to the video clip the audio still played out through the headphone jack to the PA system.
    I had built a presentation in a Web oriented training tool and it was running on Safari iOS7 with the latest update.  I have not tried it with Keynote yet.
    iPad mini (original version)

  • CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

    Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card."  See attachment.
    Signing out of and back into CUPC resolves the issue temporarily.
    I have version 8.6.2 installed and I'm using a USB headset.
    Does anyone know what might be causing this?

    Hi Steve,
    I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
    Thanks
    Erik

  • TS5180 I have no audio from my iPhone 5 except for the ringtone.  Wondering why.  Hellllllllllp!

    I have no audio from my iPhone 5 except for the ringtone.  Wondering why.  Hellllllllllp!

    AIrplay is not supported on 1st gen, I assume you have a 2nd gen (black box). Not all apps are enabled for AirPlay, this would be up to the developers to do

  • I have no audio v. 4.0.1

    For the Nth time... I HAVE NO AUDIO ON v 4.0.1 RUNNING ON WINDOWS 7 ULTIMATE.
    If I don't get any help, I am going back to IE

    Create a new profile as a test to check if your current profile is causing the problems.
    See:
    * [https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile Basic Troubleshooting: Make a new profile]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

  • Does the iMac have an AUDIO IN besides from the built-in mic?

    Does the iMac have an AUDIO IN aside from the built-in mic? 
    Also, are any special cables needed?
    Thanks,
    John

    Hi
    You should be able to check by going to about this mac from the Apple menu. Then click the more info button and then the system report button. Next, click on audio tab to the left. If you don't have an entry for built in input then you probably don't have line-in in your mac. As already mentioned though you should be able to defiantly find out with the model and year.
    Hope this helps

Maybe you are looking for