FM 10 Server supports which Epub versions?

According to the FM 10 Server datasheet, Epub is supported. No Epub version numbers are mentioned, though. Is there documentation on the specifics of producing Epub from FM 10 Server?
Thanks!

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

Similar Messages

Is Output Server supported on iSeries version 6.1?

Can anyone tell me if Adobe Output Server versions 5.4 is supported on V6.1 of AIX. Also if you know whether version 5.3 is supported on V6.1 of I5/OS it would be helpful.

Norman Sigrist wrote:
My iPod Touch is version 6.1.3 and will not update to IOS v7. Is there a reason for this?
If it is a 4th Gen... that would be the reason.
See the very end of this link for Compatible Devices and Features for iOS 7
http://www.apple.com/ios/ios7/features/

Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)

Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
Thanks

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Destination 'ColdFusionGateway' requires FlexClient support which was introduced in version 2.5....

Hi,
Hopefully someone might recognise this error...
Sadly it brings up only one result on google and that's a bit
vague as to how that person got out of thier hole... :(
I'm trying some very simple Flex Messaging with Flex Builder
2.0.1 and CF8 Standard (with LiveCycle 2.5.? built in)
But I get this error:
"Destination 'ColdFusionGateway' requires FlexClient support
which was introduced in version 2.5. Please recompile the client
application with an updated client framework."
I guess the '2.5' is referring to LiveCycle?
And I guess it's saying that the Flex compiler needs some
updated elements to compile with so it can work with LiveCycle ?
I think stepping into Flex for the first time just as FDS
became LiveCycle was not a good idea.
Strangely I (may have) narrowed it down to the gatewayid tag
in messaging-config.xml
eg:
<gatewayid>*</gatewayid>
OR <gatewayid>Flex2CF2</gatewayid>
Which has been there well before LiveCycle. BUT If I remove
this tag completely the error doesn't occur... then of course
messaging doesn't work without it. Ho hum
I can't see any DataServicesMessaging In/Outs using
cf-polling-amf... I'm having more luck with cf-rtmp - I can see the
'In' and 'Out' counters ticking away when i view my ColdFusion
Event Gateway Instance in the CF admin.
So polling-amf won't connect, whereas rtmp will. Neither
channel will 'subscribe' though.
I've got ColdFusion Extensions 0.5.155475 installed (don't
ask me how - it was a nightmare!) and working in Flex Builder 2.
I tried bringing the flex/libs over to flex builder from CF
as they were newer - no good
I updated Flex Builder with:
Flex 2.0.1 SDK with HotFix 3 from
http://labs.adobe.com/technologies/flex/sdk/flex2sdk.html
But nothing helps.
here's the mxml:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute"
creationComplete="initApp()"
viewSourceURL="srcview/index.html">
<mx:Script>
<![CDATA[
import com.mikenimer.components.*;
import mx.messaging.*;
import mx.messaging.messages.*;
import mx.messaging.events.*;
public var pro:mx.messaging.Producer;
public var con:mx.messaging.Consumer;
public function initApp():void {
pro = new mx.messaging.Producer();
pro.destination = "ColdFusionGateway";
consumer.subscribe();
public function sendMessage():void {
var msg:AsyncMessage = new AsyncMessage();
msg.headers.gatewayid = "Flex2CF2";
msg.body = new Object();
msg.body.emailto = emailto.text;
pro.send(msg);
messagestatus.text = "Message sent to ColdFusion.";
Debug.show(consumer);
Debug.show(pro);
private function messageHandler(event:MessageEvent):void {
messagestatus.text = "Message received from ColdFusion.";
private function faultHandler(event:MessageFaultEvent):void
messagestatus.text = "FAULT";
Debug.show(event);
]]>
</mx:Script>
<mx:Consumer id="consumer"
destination="ColdFusionGateway"
message="messageHandler(event)"
fault="faultHandler(event)" />
<mx:TextInput x="103" y="13" width="291" id="emailto"
editable="true"/>
<mx:Button x="402" y="13" label="Send" id="emailsend"
click="sendMessage();"/>
<mx:Label id="messagestatus" x="103" y="350" width="291"
text="Message
not sent yet."/>
</mx:Application>
relevant bits from services-config.xml
<channel-definition id="cf-polling-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint uri="
http://{server.name}:{server.port}{context.root}/flex2gateway/cfamfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>true</polling-enabled>
<polling-interval-seconds>1</polling-interval-seconds>
<serialization>
<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>
<channel-definition id="cf-rtmp"
class="mx.messaging.channels.RTMPChannel">
<endpoint uri="rtmp://{server.name}:2048"
class="flex.messaging.endpoints.RTMPEndpoint"/>
<properties>
<idle-timeout-minutes>20</idle-timeout-minutes>
<serialization>
<instantiate-types>false</instantiate-types>
</serialization>
</properties>
</channel-definition>
the messaging-config.xml
<destination id="ColdFusionGateway">
<adapter ref="cfgateway" />
<properties>
<gatewayid>*</gatewayid>
</properties>
<channels>
<channel ref="cf-rtmp"/>
<channel ref="cf-polling-amf"/>
</channels>
</destination>
I tried some of this to no avail:
<server>
<max-cache-size>1000</max-cache-size>
<message-time-to-live>0</message-time-to-live>
<durable>false</durable>
</server>
<network>
<subscriber-timeout>0</subscriber-timeout>
</network>
<network>
<session-timeout>0</session-timeout>
</network>
why is it some lucky folk find it sooo easy? :
http://www.onflexwithcf.org/index.cfm/2007/8/2/Coldfusion-8-Simple-messaging-example-using -Messaging-Event-Gateway
it should be THAT easy dontcha think?
help me please, please.
Thanx
VV

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH)

Hi,
I just want to know,
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
if support already,
how can i setting.
plz. help me!!!

The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
by Windows) for facilitating encryption. Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
encryption method is used to encrypt connections between SQL Server and clients.
http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
So the question then becomes which versions of Windows Server support TLS 1.2. The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate. By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
for connections between SQL Server and your clients:
http://support.microsoft.com/kb/316898
I hope that helps.

Which axi version is the supported and compatible version for JDK1.4?

Hi,
Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance.
Regards,
Lokesh Kumar Pattajoshi

Hi Jürgen
Please be advised that the customer is correct.
Please see the following note:
539188 TREX installations for E-Selling
For all E-Commerce and ICSS scenarios using
SAP Web Application Server Java 6.40 TREX 6.1. is recommended.
Hope this will be of assistance.
Kind regards Peter
Edited by: Peter Murphy on Jan 23, 2009 3:01 PM

Which client versions will leopard Xserve support

Which client versions of OSX will leopard Xserve and intel server hardware support?
hal

If the Xserve shipped with Mac OS X 10.4 or earlier, the retail version of Mac OS X 10.5 client will work on it. If the Xserve shipped with Mac OS X 10.5, the system would need to be installed onto an external drive or through FireWire Target Disk mode if possible, and then updated so that the OS version on the drive is newer than the Xserve. If no compatible Mac OS X updater is available, the client version of Mac OS X cannot be used on it.
(26966)

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Error message, "Movie needs Quicktime, which is not supported by this version of iTunes

Since itunes 12 has been downloaded, I can't play any movies or trailers due to an error message or "the movie requires Quicktime which is not supported by this version of iTunes. I have Quicktime, but it still can not play both downloaded content and movies I want to preview. Can you help?

iTunes for Mac: Older media files may require iTunes to reopen in 32-bit mode - Apple Support

This movie requires QuickTime, which is not supported by this version of iTunes.

I know many people are also having this problem and some solved the issue by running the app in 32 bit mode. Unfortunately, when I do that, iTunes warns me that I have to open the application in 64 bits.
For those of you who don't know about the problem, here is the issue. When I try to play a lecture video in iTunes U, application prompts this error message and does not play the video no matter what.
This movie requires QuickTime, which is not supported by this version of iTunes.

Delete the content and download it again. If you've moved the iTunes library to a secondary volume, move it back to your home folder.

I am trying to watch a movie but a box pops up saying "This movie requires QuickTime, which is not supported by this version of iTunes." how do i fix this

i am trying to watch a movie but a box pops up saying "This movie requires QuickTime, which is not supported by this version of iTunes." how do i fix this

Try installing the most recent version of the QuickTime Player for Windows:
http://www.apple.com/quicktime/download/

Which application server supports EJB 3 and Java EE 5?

Hi all,
I want to develop an application using EJB 3.
I was planning on using JBOSS 4.0.4 as application server, but I am not sure whether EJB 3 is fully supported.
Which application server supports EJB 3 and Java EE 5?
Thanks

Just install it using the EJB3 profile in the installer. Don't use the "All" profile
and think EJB3 is included in it :)

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

Skype for Business: Admin would prefer you to use Lync or it's the only version server supports.

We're running Lync Server 2013, in house, and some of our more fearless users decided it would be a good idea to install the newly released Skype for Business client.
These users were greeted with the following prompt;
You have the newer version of Lync called Skype for Business. However, your admin would like you to use Lync or it's the only version your server supports. Please restart now to use Lync.
I suspect, that our server is causing this. Can anyone point me in the direction of server prerequisites/patches/updates/KBs that might help eradicate this message?
Many thanks in advance,
James Vincent

Hi,
It is controlled by the server (Client policy), when having Feb-2015 Lync CU installed on your Lync frontends, you can control the UI of the client by using Client Policy on the Lync side "Set-csClientPolicy -EnableSkypeUI $False or $True"
nevertheless you need to know that if you block the Skype UI users will get the mentioned Warning Message and the client will reboot into the old Lync UI but still they will have some confusion with some points (refer to this article for more details
http://masteringlync.com/2015/04/04/change-is-coming-what-enableskypeui-doesnt-do/ )
If you want to block the whole update, you can do that by blocking the new updates and patches released two days ago using "SCCM or WSUS" although I think if you haven't done that already it is little late for that.
If you find this helpful
please click "Vote as Helpful" if it answered your question please click "Mark as Answer"
Mostafa Eltohamy
Blog: http://Lyncdude.com Twitter:
LinkedIn:
XING:

FM 10 Server supports which Epub versions?

Similar Messages

Maybe you are looking for