FM 5.0 not showing Port Channel correctly

1 x PC is showing as thick link and also all ISLs shown beside it. There are other PC created and all ISL links have been replaced by one PC link in the topology diagram. All links are up and working if viewed from CLI. Port channel created between 1 x MDS9509 and 2 x MDS9148.
Did anyone else experience this behaviour before?

Thanks Phan.
ISLs are not shown under the PC link but it is showing with it. I have logged a TAC call and one of the Tech support guys is currently looking at it. It looks like issue with FM drawing up the topology. From CLI PC is fine and all links are operational. We tried deleting and recreating the PC and also tried what you suggested.
Anyway will update once tech support finished with it.
Sent from Cisco Technical Support iPhone App

Similar Messages

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

In iOS 7.0.2 All and Missed tabs are not showing call history correctly

In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Scroll bar not showing relative size correctly

I'm not sure of the correct terminology so please bear with me. In CS4 when I zoomed in on an image, the bar at the bottom would show the size of the image now on screen relative to the full size. i.e. if I go from 50% to 100% the bar would be half the size indicating that I am only seeing half the image. At least I think that was the case in CS4.
Here's and example from CS6.
Open an image, choose "Command-0" to make it fill the window, and the percentage is 48.16%. The bar at the bottom is not there, but if it was I assume it would fill the width of the window.
I select "Command-+" to zoom in, and the percentage goes to 50%. The bar now fills about 30% of the window width indicating that I have zoomed in a whole lot, but I haven't. There is only a little bit of image on either side not visible, the rest is a huge grey area extending left right, and up and down.
How do I make the bar indicate the true amount of zoom, and how do I get rid of that grey area?

Yes, it's working as designed.
There's a feature called "overscrolling" which allows you to scroll past the edge of the document, and it's only available when the document is larger than the displayable area. You'll see it work if you zoom an image to be *just* larger than your space and use the (what seems like too-short) scroll bar.
This inconsistency, between when the document will all fit in the displayable area, and when it exceeds the space, is the real root of the problem.
People have complained about this for a long time, and Adobe doesn't listen. Thing is, some folks would like to be able to scoll or pan to offset an image that DOES all fit so as to be able to comfortably sketch on the edge - or for whatever reason. That would make it more consistent.
Here's a reproduction of the problem, and scroll of the image that's slightly bigger than the window to illustrate:
Here the image all fits - no scroll bars:
Here the image has been zoomed in a little more - the scroll bars have appeared and are about 1/3 the size of the image:
Here the image has been scrolled almost to the limit of the horizontal scroll bar:
It's working as designed. That doesn't mean the design is right,
-Noel

Cisco LMS Prime: Device Center does not show Port statistics for Routers

Hello,
i am wondering why the Port Statistics for Routers are not showing in the Device Center Port Status Section. Is this normal behaviour?
thanks
Alex

Hi Afroj,
Data Collection as well as Usertracking ran successfully.
regards
Alex

Messages from others are not showing in the correct order.

I can send a message from my iPhone ... and it will show up at the bottom of the conversation in Messages on my Mac as the most recent message. But when I receive a reply, it does not show up as the most recent message. Instead, it appears further up the conversation in the past.
Anyone else having that problem? Is there a fix? Thanks!

Hi,
Unfortunately this seems to happen.
It is more noticeable when the Mac has been Off line (Shut Down or Sleep) and a conversation or two has been happening on an iOS device.
When the Mac gets turned On Messages tries to catch up.
These iMessages play out like a speeded up chat but are not Instant.
Consequently any further parts of the conversation then get placed in between and out of sync.
Jabber and AIM IMs are times stamped and it would appear that the iMessages ones are as well
What does not seem to happen with the iMessages ones is the App using those Time Stamps to put them in order again.
Currently there is no fix (other than keeping the computer On and Awake)
9:55 PM Thursday; November 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Fotos not showing in the correct order

Hi
Since i updated Apple TV's Firmware to version 5.1 (the latest version), fotos from iPhoto are not displayed in
the correct order anymore. Usually the date when the picture was taken is the order in which fotos are displayed.
Any idea? I couldn't find any settings.
On iPhoto on my Mac, no problem.
Thanks for helping me
Thomas

Problem solved, it was definetely iPhoto. The latest update a few days ago solved it. Pictures in events are now shown in the same order as in iPhoto again. In my case, the date when the picture was taken.

Receiver determination is not showing communication channel

HI, I am working on file adpater scenario. I have created communication channel and later deleted it. Then created new communication channel and completed other steps like - creating- receiver determination and interface determination. But when I am trying to create Receiver agreement , I am not getting the new communication channel in selection list. Its showing old communication channel that i created and deleted. There are no entries to activate in Change list and cache refresh also working fine.
Please let me know why its showing old comunication channel, instead of new one.

Dear rajaram,
I found two chances to have the above mentioned situation.
[1]. You have deleted the channel from the scenarios and Change lists, But you may find the same in the Objects Tab[between the Change LIst tab and Scenarios Tab].
[2]. The second chance is that you may created the channel with the conflict on the 'Sender' or 'Receiver'. Check the second one. I believe the second one made this probelm
regards
Neo
<i>reward me, if found useful</i>

Date is not show up in correct format from excel with tab-delimited was generated from query

Hi,
My code below worked file and save file into txt file. However, the date is the problem. I have to open excel file and manulay change the format of the date to make it shows the correct date, other way, it alutomatic shows 00:00:00 when i first open the file. How can i make the date automatic shows from the file i generated in excel?
<cfset tab = chr(9)>
<cfset Str = "">
<cfloop query="q_report">
<cfset Str = Str & q_report.purchasedNo & tab & q_report.desc & tab & q_report.Del_date & chr(13) & chr(10)>
</cfloop>
<cffile action="write" output="#Str#" file="#variables.file#">
thanks

Have you tried using DateFormat() on the date?
^_^

Files not showing up in correct category on iPod

5th Gen iPod Windows XP Pro When I'm in iTunes then downloaded Audiobooks show up both in my Library and on my device as being in the Audiobooks category. However, when I disconnect my iPod then Audiobooks show up in Music instead...is there any way to move them since they show up in the correct place when connected to my computer? Thanks...

Chances are the extension to your audiobooks is m4p and only audiobooks ending in m4b go into the audiobooks folder on the IPod. Just change the original file extensions on your PC and reload them to your Ipod, being sure to remove the misfiled copies on your Ipod first....

Photos not showing in the correct time order in the timeline

On a recent holiday I was using both my iPhone and my dSLR to take photos. When I returned from holiday I noticed that the time on my dSLR was wrong. After I had imported the photos into the photo mac app I changed the timestamps to the correct one.
Unfortunately not all of the photos reordered themselves correctly in the timeline. They are no-longer in time order, near time order, but not perfect.
For example the first photo in the timeline currently starts at 12:30, about 5 photos later the timestamp is 11:20.
How do I get my photos to display in the correct time order in the timeline?

I think I've figured it out,
When I put in the time for my SLR I set the time zone to the holiday destination.
Despite having a local sim card and the iPhone correctly geotagging me in the location, not all the timezones on the iPhone photos are correct, some are home time zone, others are holiday timezone.
To fix it I used the adjust time tool to change the time zone, but leave the time the same and the photos magically reorganised into the correct place.
It seems the timezone is as important as time. I hope that helps other people

Ios not showing web pages correctly

Anyone know why some database driven web pages show up fine on Macs, Windows, android, linux, etc but not in ios?
This page works fine apart from when viewed on iphone/ipads. The schedule page is blank on iphones/ipads. All browsers
http://www.metrosoccerny.com/schedule.php?seasonid=394

Not sure if this will help or not, but I read a previous post and it mentions DNS settings being configured incorrectly. Take a look at the article that they posted http://macs.about.com/od/faq1/f/browserdns.htm

Latha font not showing some characters correctly

பூ is not displaying as intended in any fonts I use.
In the layer Name it read correctly, but in the view window it renders incorrectly.
I'm using a PC.
Has anyone encountered this issue before? or know how to fix it?

AE does not support full Unicode glyph substitution. Such stuff usually has to be imported as a graphic, if you can't find a way to enforce a correct glyph e.g. with an expression or manual typing in the character code.
Mylenium

Textnode: does not show special charaters correctly

To use special characters in Shake 4.1 u have to use hex-codes. This works with the font Utopia.
If I need a "ä" (auml) I need type in the following: \xE4 which gives me the correct sign - in Utopia! If I change the font to Verdana, 0/00 (permille ?).
I could not find a working hex-code table. Any idea?
Volkmar
MBP 17/2.13/2GB Mac OS X (10.4.8)

Hi,
can you please provide information which SW version you are using, and also the product code of the phones you are using (product code can be found from phones type label sticker under that battery, it's "Code: xxxxxxx"). With these information R&D is able to test the problem efficiently.
I'm working at Nokia, but all my posts represent my own views and these should not be mixed up with Official NOKIA statements.

FM 5.0 not showing Port Channel correctly

Similar Messages

Maybe you are looking for