FM AM_ASSET_MAIN_NUMBER_F4 not retreiving ANLN2

Hi all,
I'm having a problem with FM AM_ASSET_MAIN_NUMBER_F4.
This FM should normally give BUKRS, ANLN1 and ANLN2 as result but I'm only receiving BUKRS and ANLN1.
I also tried with the GET PARAMETER ID 'AN2'...., this is the ID for the Asset SubNumber, but this also returns nothing.
I also tried to call the standard searchhelp 'AANL' with FM F4IF_FIELD_VALUE_REQUEST but this gives me the same problem as the Get parameter ID 'AN2'.
Can anybody help me to retrieve the value for ANLN2 in this search help?
Best regards,
Olivier

Solved it on my own

Similar Messages

HT204266 Why is it that after upgrading to IOS 6, I could not retreive my full list of my purchased applications & ganes list in the app store now !!!!

Why is it that after upgrading to IOS 6, I could not retreive my full list of my purchased applications & ganes list in the app store now !!!!
Whenever I try to tab my purchased in the update feature of app store; not only does the long list of my previous purchases do not showed up like in IOS 5 do but after a while it just prompt out to the main home page. I tried this for both my 3GS and 4GS too and both have the same problem. APPLE INC please rectify this serious problem as soon as possible.

Did you read your other posted question, that has been answered.

Mail does not retreive messages after upgrading to Mountain Lion

I just upgraded my work iMac (2009) to Mountain Lion last night and now it will not retreive any messages from my work email account (POP). It was working fine yesterday (and for the past 3+ years) while I was still on Lion, but despite searching for answers and trying multiple solutions for several hours, I still cannot get it to work. Among other things, I have deleted and then added the account back (multiple times); restarted the Mac (multiple times); and zapped the PRAM, but nothing has fixed it yet.
When I select "Get Mail" from that mailbox and watch the Activity Monitor, it connects to the server, says "Fetching new mail", then "Preparing to retreive new mail", but it then just disappears after about about a minute and makes the "no mail" beep. There are no error messages, but I can see in the bottom "Mail Activity" window that it says it's downloading 40+ messages but nothing shows up. The mail account still works on my iPhone and I can check the mail on my webmail server, so I don't think it has anything to do with the server especially since it worked fine yesterday.
Any insight would be much appreciated because it's driving me crazy!!

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Could not retreive download information in App Store via Wi-Fi!

I have a very very critical problem about downloading stuffs in App Store! The detail is when I open App Store, after loading stuffs, it said: "Could not retreive download informations, please connect to iTune." I don't care about the message, so I continue anyway. After entering my account informations, the second problem
appeared, there's another message said: "To ensure the secure connection, please check your setting in Date & Time." some like that. It's okay, I configured the setting, but after that, it showed me the same message. So I have no idea about what happening. Because this is not work, so I follow the first recommandation: connect to iTune. But it also not work. Is there have any relations in these 3 problem? Now I feel lose and I need some help!!!

Are you accessing the App Store on iPod Touch or iTunes?? maybe you should try the other.

LOOKUP not retreiving data

Hi,
I have a lookup function not retreiving any information. If a create a report in my application called "Rates" and use the same selection as in my LOOKUP function I can see a number, but for some reason it retreives a zero.
In my REC statement i divide by LOOKUP(PRC). If I exclude the division the number from "A11100" is moved. Is there somehow I can see/check (or...) what the LOOKUP is querying out?
*XDIM_MEMBERSET CATEGORY=BUDGET
*XDIM_MEMBERSET CUSTOMER=P01
*XDIM_MEMBERSET DATASOURCE=UPLOAD
*XDIM_MEMBERSET PRODUCT=P101
*XDIM_MEMBERSET PROFITCENTER=H111
*XDIM_MEMBERSET RPTCURRENCY=LC
*XDIM_MEMBERSET TIME = 2009.JAN
*XDIM_MEMBERSET MEASURES=PERIODIC
*LOOKUP Rates
*DIM PRC:PRate_Acct = "PR10000"
*DIM PRC:PRate_Entity = "GLOBAL"
*DIM PRC:Product = "P101"
*DIM PRC:Time = "2009.JAN"
*DIM PRC:Category = "BUDGET"
*DIM PRC:MEASURES = "PERIODIC"
*ENDLOOKUP
*WHEN ACCOUNT
*IS "A11100"
*REC(EXPRESSION=%VALUE%/LOOKUP(PRC),ACCOUNT="A90100")
*ENDWHEN

Hi,
Problem solved. Writing all dimension ID in capital letters solved the problem:-)
/Lars

Workflow for BO BUS1001006 not retreiving plantu2666

Hi Experts,
I have activated a workflow for material creation using BO BUS1001006 .
It works fine , but the problem is it does not give me the plant details.
My requirement is that i have to send the plant of the material created /changed.
hope you offer quick solutions.
<THREAD LOCKED. Duplicate of [Workflow for BO BUS1001006 not retreiving plant]. Please do not duplicate posts, read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further info>
Edited by: Mike Pokraka on Jan 28, 2009 7:33 AM

Hi Martina,
If you have done that then you are almost on the verge of completion!
Follow this binding procedure between the task container and the method container and get the results.
In the BO method, add an output parameter that would store the plant detail.
Now create a data element in the method code of the same type as plant detail type.
Then use swc_set_element to store the value of the plant detail in the output parameter.
In the workflow task, create an output parameter of the same type as the BO method output parameter.
In the binding between the task container and the method container fetch the value of plant details from method container to task container element.
Now pass this parameter to the workflow container and use in the send mail step in the mail text.
Make sure to save and generate the BO after doing all the changes.
Regards,
Saumya

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

The e-mail on the security question reset is not vaild. So I can not retreive my reset. What shall I do?

The e-mail on the security question reset is not vaild. So I can not retreive my reset. What shall I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(116211)

Views Not Retreiving Data Immediately

I am inserting 2,000 rows in a table and doing a commit! When retreiving the information through a view, it takes approx. 15 seconds before the committed rows are displayed.
Any ideas why this is happenning. I did not know that Views could cache information.

Hi Mario,
check the execution plan of the query that compese the view.
May be that the plan choosen to retrieve the records is not the best.
Bye Max
null

Note retreival from dead phone with broken power button

Hi all - my iphone 4s is dead for good, and my lock/power button on the top is broken. when i try to retreive my notes from the icloud, i get a message saying, "to use icloud notes, create a new email address by turning on notes in your icloud settings using iOs or or OS X" is it possible to retreive my notes although i can't access the actual iphone itself? any help is much appreciated!

If you had ever gone to Settings>iCloud and tried to turn notes syncing on you would have been prompted to turn on Mail to create an iCloud email account first. If you never synced them with iCloud they cannot be recovered unless you backed up your phone to your computer using iTunes. If you did back up to your computer using iTunes, restoring the backup to another iPhone would recover them; or, you could purchase and use 3rd party software to extract them from the backup (like iPhone Backup Extractor).

Saved my itunes on external hard drive added windows 7 then could not retreive after downloading itunes on new OS

This has got to be a common problem for people upgrading to windows 7

There is no common issue for iTunes on Windows 7.
Granted, based on what has been posted, it could be argued that the only issue is user error or a complete lack of details of the actual issue.
What does "could not retrieve" actually mean? Are there any error messages?
Is the drive actually connected to and accessible from the computer?

UWL custom attributes are not retreived

Hi all,
We are trying to add some custom attributes to our UWL. We are able to see the new columns but they remain null. It seems that the values are not retrieved from the backend.
We have tried defining custom attributes from workflow container, from BOR object and even UM but without success.
We have followed this thread http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379 and also other ones.
Here is my code for my custom attributes (under "TEST" comment):
<ItemType name="uwl.task.webflow.srm.TS00700018" connector="WebFlowConnector" defaultView="TS40008005_view" defaultAction="com.sap.pct.srm.core.action.launchWD.inv.detail" executionMode="default">
       <ItemTypeCriteria externalType="TS00700018" connector="WebFlowConnector"/>
                        <CustomAttributes>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="BOTYPE" displayName="Type of Business Object"/>
               <Attribute name="BOID" displayName="Business Object ID"/>
               <Attribute name="BOMODE" displayName="Business Object Mode"/>
          </CustomAttributeSource>
          
          <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalId" objectType="DECISION" cacheValidity="default">
                       <Attribute name="V_BE_REFOBJ" displayName="Description"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="UM" objectIdHolder="creatorId" objectType="user" cacheValidity="final">
                    <Attribute name="department" type="string" displayName="Department"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="W_HEADER_INV" displayName="Header"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="W_HEADER_INV" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="GUID" displayName="MiGuid"/>
          </CustomAttributeSource>
          
     </CustomAttributes>
     <Actions>
          <Action reference="com.sap.pct.srm.core.action.inv_approve"/>
          <Action reference="com.sap.pct.srm.core.action.inv_reject"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.inv.detail"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.print"/>
     </Actions>
</ItemType>
I've read in this thread [UWL: Time Delay of SAP and Custom Attributes: refresh necessary|UWL: Time Delay of SAP and Custom Attributes: refresh necessary] that UWL cache and the delta pull mechanism must be configured for the new attributes but I don't know how to check it.
Please, can anyone help me?
Thanks in advance,
Regards

Hi all,
I'm going to close this thread as it is duplicated.
Regards

LOV not retreiving data

Hi,
i have a LOV which needs to show the data based on data in another field. When i open the page all the fields are defaulted, but my lov doesnt work, it works when i change the data in the other field, But after that whenever i come back to the screen it works fine. Somewhere the session variable is not setting properly. this error happens only when i login first time.
please help

Hi,
That happens because the fields don't have a session value.
When you change a value you're probably sending a submit request and all the fields are set with the default values.
Maybe you can add a default value to you lov. A workaround would be creating a plsql page process to initialize session values.
Hope that helps. Regards,
Paulo Vale
http://apex-notes.blogspot.com

Workflow for BO BUS1001006 not retreiving plant

Hi Experts,
I have activated a workflow for material creation using BO BUS1001006 .
It works fine , but the problem is it does not give me the plant details.
My requirement is that i have to send the plant of the material created /changed.
from which field of bus1001006 can i get it ?
hope you offer quick solutions.

Hi Martina,
If you have done that then you are almost on the verge of completion!
Follow this binding procedure between the task container and the method container and get the results.
In the BO method, add an output parameter that would store the plant detail.
Now create a data element in the method code of the same type as plant detail type.
Then use swc_set_element to store the value of the plant detail in the output parameter.
In the workflow task, create an output parameter of the same type as the BO method output parameter.
In the binding between the task container and the method container fetch the value of plant details from method container to task container element.
Now pass this parameter to the workflow container and use in the send mail step in the mail text.
Make sure to save and generate the BO after doing all the changes.
Regards,
Saumya

FM AM_ASSET_MAIN_NUMBER_F4 not retreiving ANLN2

Similar Messages

Maybe you are looking for