FM and Bluetooth

I have just purchased a BH-111 bluetooth headset to use with my 3110c phone.  It works fine with the Music Player, but with the Radio it says "connect wired enhancement".
- Does this mean I cannot use the bluetooth headset with the FM radio?
- Is there a headset/headphones I can use wirelessly with the FM radio?
- Is there a phone with FM radio I can use with the bluetooth headset?
Thanks for your help.

On most phones the FM radio requires an antenna to pick up radio signals and uses the headphone cord for this purpose. That being the case it is not possible to listen to FM radio via bluetooth because there is no antenna to pick up the signal. So it is impossible to use the BH-111 for that purpose.
Nokia does sell a bluetooth headset with a built in FM radio to get around this problem, it's called the BH-221. You control the radio with the headsets controls, not the phones so it will work with devices that don't have an FM radio in them at all.

Similar Messages

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Has anyone else downloaded iOS 7 on a 4S and found the WiFi and Bluetooth don't work anymore?

    I'm used to Apple products that "just work", but I'm not seeing it with the installation of iOS 7 on my phone (4S). I installed it earlier today, and the Wi-Fi and Bluetooth worked for about an hour, then just quit working altogether. The WiFi button is grayed out in Settings, and Bluetooth dosen't even display a button (all I get is a throbber that continuously spins). Trying to activate them through the "swipe-up" command center doesn't do the trick, and resetting the network settings also accomplishes nothing. Several reboots later, and I still don't have WiFi and Bluetooth.
    Has anyone else experienced this, and is there a solution? I may just decide to eschew iOS 7 and restore my pph

    After multiple attempts to restore and reboot, I finally decided to take a trip to my local AT & T store. They contacted Apple, and I explained the situation. I ended up moving to the iPhone 5, as my 4S was in the renew period. The 4S is still under warranty, so all I have to do is bring it to an Apple Store, where they will either fix or replace the phone. Looks like one of my kids will be getting a 4S :-)

  • TS1559 still no solution for greyed out wifi and bluetooth - what to do? been messing around with it for weeks and now discover I'm just outside of warranty period? WHAT?

    I am in such a predicament - phone not been quite right since the 6.1 update and I was tolerating the inconvenience of switching off and on etc etc for the past couple of months and now the wifi and bluetooth are totally greyed out all the time - did every restore possible including back to factory settings - still no luck - please don't tell me that trying all the solutions over the past 2 months that temporarily worked for a few days at a time will now mean I have timed myself out of the 1 year warranty? arghhhhh (I can't believe that such an issue will create the response 'oh well, your problem - best just buy another one' ???)
    I can't just drop everything and drive to the apple store and wait for hours every time there's a 'glitch' otherwise I may as well move nextdoor to the mall. They tell you to try and solve it yourself first - which I did - and now it's not responding to anything I try, will I be told - 'too late, out of warranty'???
    I see theres an update for the iphone 5 that fixes wifi bugs - what about us 4s owners? even my 3 year old 3gs is still working on wifi (haven't dared to update it!) so don't start telling me to expect that the iphone will only last 13 months - NOT AT $600 a piece
    This is madness and driving me crazy
    Please has anyone had any luck fixing this problem???

    well, you know how it is - glitches that usually resolve with a hard reset etc
    then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
    never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Re: Windows Vista Ultimate 32-bit FN key and Bluetooth crash

    I have an old problem with FN key. I installed Vista and after a while, it stops working. In Windows, when I press the FN key it freezes about 3 seconds, a blue screen appears that tells me Vista has crashed, a memory dump begins and then the laptop restarts. And now, bluetooth doesn't work anymore and if I try to enable it it dows the same thing.
    P.S. The Windows is new installed (4 days), and has automatic updates to date.
    I reinstalled Toshiba Value Package, Bluetooth Monitor and Bluetooth Stack.

    LE: I uninstalled Value Package and it doesn't give me the blue screen anymore. The FN key works, but it doesn't display that menu on the top of the screen when i press it, but the functions work.

  • Yoga 13 WiFi and bluetooth issue resolved

    Unfortunately, I also met WiFi problems, but also found unexpected and sad solution.
    Wifi worked pretty well at working place, but had problems at home. As an experiment I brought WiFi router from the working place home. It did not work!
    At home I used pretty old keyboard and mouse plugged into passive USB hub. As soon as they were disconnected, problems disappeared. WiFi was also stable after I plugged power supply into the USB hub.
    We are making 24-bit analog-to-digital converter that connects to the PC via USB. I exactly know its current consumption (300 to 330 mA) and know that it correctly handles USB rules about power regulations. Maximum current, specified by USB2.0 standard, is 500mA, so consumption of our ADC is within limits. As soon as I plug this ADC in, WiFi connection immediately disappears at the working place.
    In the case of other devices, such as USB flash drive, power consumption may depend on the activity, increasing as it writes or reads something, and decreasing at the moment of inactivity.
    I'm pretty sure that Lenovo placed their WiFi/bluetooth module on the same USB hub with right-side USB2 connector. Any device, that requires energy, being plugged into USB2.0 port, immediately destroys WiFi (and presumably bluetooth) and it is rather hard to get it back alive without special dancing around.
    So, conclusion: never plug anything into USB2.0 port, if you need WiFi. This decreases number of available USB ports from two to one. Lenovo team should be blamed for that, not driver manufacturers or board manufacturers - Lenovo did non do its construction job well.
    I am not sure, that all WiFi and bluetooth problems of Yoga discussed at this forum have the same reason. But in any case incorrect implementation of USB2.0 power should be considered before any other reason of malfunction.
    Car manufacturers recall their products in the case of a failure. What about computer manufacturers?

    Citation from Wikipedia:
    The USB 1.x and 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. The specification provides for no more than 5.25 V and no less than 4.75 V (5 V ± 5%) between the positive and negative bus power lines. For USB 3.0, the voltage supplied by low-powered hub ports is 4.45–5.25 V.[61]
    A unit load is defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port in USB 2.0; 6 (900 mA) in USB 3.0. There are two types of devices: low-power and high-power. A low-power device draws at most 1 unit load, with minimum operating voltage of 4.4 V in USB 2.0, and 4 V in USB 3.0. A high-power device draws, at most, the maximum number of unit loads the standard permits. Every device functions initially as low-power — but may request high-power, and get it if available on the providing bus.[62]
    Obviously, WiFi adapter is a high-power device. If it does not have sufficient power, it will start power saving program by reducing speed. Even lower power may interrupt ins basic functions. When I connect another high-power device (HDD or ADC) to the same hub, it should get its 500mA from the hub. Seems that starting at this moment  WiFi receives much less current than it requires and stops working. 
    If something is plugged into USB3 port, and this something does not utilize all energy it requested, WiFi starts working again.
    I would greatly appreciate if somebody repeats my tests using Yoga or Yoga 2 Pro.
    Test:
    Reboot your system, all USB devices disconnected
    Open http://www.speedtest.net site and measure Download connection speed (Speed1)
    Connect external HDD to USB2 (NOT USB3!) port
    Wait until HDD is connected
    Test Download speed once again (Speed2)
    Report results to this blog as Speed1/Speed2 couple of numbers
    Thank you in advance

  • Late 2005 - Airport and Bluetooth - won't work together

    Hi everybody!
    I have a problem with my Powermac G5 (late2005).
    I have the Airport Extreme with Bluetooth 2.0+EDR card installed.
    WLAN and Bluetooth work both if operated separately.
    But when Airport is activated and running and I turn on Bluetooth (and connect for example my Magic Mouse) Airport breaks down. - I loose my connection and can't see any other wireless networks.
    Switching to another Airport channel din't help.
    Does anybody have an idea what to do?
    Thanks a lot!
    Chris

    I just started trying BT.
    I allready had a look at the cabling and read about it, that it doesnt matter how the calbes are connected to the airport card.
    I don't think I can put anything between the antennas.
    The late2005 has the build-in antenna (for Airport and BT)...
    But I will have a look if I can place anything between an I will change the cabling...
    Thanks so far!
    Chris

  • Internal Mic and Bluetooth not working together at the same time

    Okay.. so I've been noticing this happen alot lately. Whenever I have my usb wacom tablet plugged in (which is almost always), there would be no internal mic input and bluetooth would become "not unavailable". Also, even when I try an external mic, there was no input. Could this be a coincidence or some related usb-bluetooth problem? Could it be my audio input or tablet driver problem?
    I've used my mic to skype before I had installed the tablet. Also before I used garage band to record my sister's guitar with an external mic, there was no problem at all, and of course I didn't have my tablet plugged in at the time. Recorded a whole hours worth of music, and didn't have any problems.
    Today.. I checked to see if my internal mic was working before I launched skype, and it was working perfectly, and I also noticed my bluetooth was available (didn't test it though). Then I went on skype talked to friend for about 20min, and suddenly the audio stop working. I had my tablet plugged in from earlier today. I restarted my macbook (with no tablet plugged in) and still mic input isn't working. I tried and external mic, but still nothing. I tried uninstalling skype, still nothing.
    This is not the first time this happened, I noticed it would somehow fix itself after a few days every time, and mic and bluetooth would start working again out of nowhere. Which makes it even more weird.
    Need help pleaseee!
    PS. I tried getting someone to fix it before(a few months ago- I don't really use my mic or bluetooth much), but when I brought it in and started up my mac, at that time it was working again. But now it isn't working =(

    UPDATE: I just noticed my bluetooth was no longer "unavailable", so I quickly went into system preferences, and noticed that my internal mic input had some input! Very weak though, only 1-2 bars. So what does this mean?

  • How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    Hello, lustige luka. 
    Thank you for visiting Apple Support Communities. 
    The Personal Hotspot feature using USB  should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled.  Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue. 
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/ht4517
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    Jason H. 

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

  • Trouble with Vista and Bluetooth

    I'm having an issue with Vista SP2 and Bluetooth. I have Vista Home Premium SP2 running under Boot Camp on a MacBook Pro, and I have an Apple Wireless Mighty Mouse and Apple Wireless Keyboard I need to pair with Windows. I followed the instructions listed in the Boot Camp manual, but Vista won't let me create my own passkey, it just "pairs" the devices for me. When I close the window, the devices do not show up, nor do they function. I called AppleCare support, and have talked with all of who could help me, and they have determined this is an issue with Windows and that I need help from Microsoft. They said I have to enter my own passkey to get it to work, and they do not know why I can't. They're thinking it has something to do with a Windows Update.
    Just wondering what can I do to get these paired up and working. I really need these to work since my MacBook Pro is on a notebook riser and it's awkward to raise up and type and click in such an uncomfortable position.
    Thanks!
    Nathan

    I cannot get the apple wireless keyboard to work with my Mac Pro (Feb-2008 model) under bootcamp and Vista Home Premium 64. I had to upgrade from 10.5.1 in order to use Final Cut Studio 3, so I downloaded and installed OSX 10.5.8 update. Then I ran bootcamp and installed Vista 64. Afterwards, in Vista I inserted the original OSX 10.5.1 DVD and installed the drivers so Vista would recognize the apple hardware.
    I went to pair the wireless mighty mouse and apple keyboard and the instructions say to enter 0000 for the mouse, and enter an 8 digit or larger number for the keyboard. Since the keyboard doesn't work, I couldn't enter anything so I let the system choose a number for the keyboard and let the mouse go without a number. Both show they are connected but only the mouse works. I also tried letting the system generate a number for both but only the mouse works. I tried turning off the mouse but then the system doesn't detect the keyboard at all. For that matter, I don't even like the mighty mouse anyway and prefer to use the mouse with my Wacom tablet so I could do without the mighty mouse if that would somehow help.
    Is there a known issue with 10.5.8 and bluetooth under windows vista 64? What should I do? I must have Vista 64 in order to utilize 3ds Max 2010 and I must have a keyboard to use 3ds Max. Is there a driver I can download to make it work or do I need to buy a generic USB keyboard?
    Thanks in advace for any help with this. I am looking forward to finally getting this Mac all set up.

  • IPad wifi and Bluetooth greyed out after iOS5 update

    After updating to iOS5 on my iPad my WiFi and Bluetooth were greyed out like the update has caused a hardware failure on the radio side.  My SIM and 3G still work (not that I use it) but I can not even choose wifi or bluetooth in settings app as they are greyed out.
    In Wifi it says "No Wi-Fi" and Bluetooth it says "Unavailable"
    I wasn't using it a lot so just forgot about it for a while as it sat gathering dust being an expensive paperweight thinking that the next software (5.0.1) update would sort it all out.  It doesn't.  I have a 64GB iPad 3G with no wifi and as I am living abroad the 3G is useless to me (though only use the ipad at home on my wirless network anyway, or not as the case is now!!)
    I have restored, factory restored, cleaned installed new software, everything I can think of but still there is no wifi and no bluetooth.
    Has anyone else had this issue?  My (very expensive) iPad is now next to useless!!
    ANY help is VERY much appreciated.

    thank you for fast response and sharing the link but i've tried everything including downgrade but it seems that theres a serious problem with MC497LL model and trying to reach to the support for any updates about it at least trying to inform them

  • Why have the ports on the left of my macbook pro and the wifi and bluetooth stopped working?

    Hey All,
    About a week ago the two usb ports on the left of my 17" macbook pro, soundcard, wifi, and bluetooth stopped working. The power port, ethernet, remaining usb on the right are still functional. I've tried repairing the permissions and other software based solutions but to no avail. I'm worried that this might be a motherboard issue but am apprehensive about taking the ol' girl into a genius because it will probably cost more to repair than the remaining value of the system. Anyone have any ideas, can confirm my suspicion?
    Thanks!

    Well I'm using Google Chrome browser on Lion and when I type in that URL nothing happens. Except for the "This webpage is not available" banner.
    So it looks like your website is down and what you are getting on your devices are cache.
    Oh just deleted the www and now I see the page. Yup all the info looks intact. home about us products Q&A and so on.

  • HT4623 I updated my iphone with IOS 7 and my wifi and bluetooth is not working. How can I go back to IOS 6?

    I have updated my iphone 4s with the last version IOS 7.0.2.
    At the beginning my screen freezing each time I enter numbers or letters (in iphone security code as well as texting in any app)
    Now, my wifi and bluetooth are broken. I have tried to activate them 3 days and nothing.  I am lost. I have no internet in my telephone plan, so, all my apps are not working anymore.
    How can I go back to IOS 6?
    My iphone will be working correctly again???
    Thanks!
    I very appreciatte any urgent answer .
    Paula

    Downgrading the iOS is not supported at all.

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

Maybe you are looking for