FM/BAPI for assigning a class and value instead of manualy doing in IE02

hi guys,
i need a FM/BAPI which will allow me to take input as equipment number and assign the class and value for it as done manually in IE02.
Input should be equipment number.
POINTS will be given.

Hi
I hope this thread can help you
Characteristic Value
Re: Equipment Characteristic Value
Change Equipment Using Transaction IE02
Regards
pavan

Similar Messages

FM/BAPI for assigning a class and value for the class instead of manually d

Hi guys,
Instead of manually adding equipment class and assigning value for the class added can i get a FM or BAPI.
this is for transaction IE02.
rewards will be given.

Hi
I hope this thread can help you
Characteristic Value
Re: Equipment Characteristic Value
Change Equipment Using Transaction IE02
Regards
pavan

Function Module or BAPI for Sales price calculation and Pricing worklist

Hi Retail experts,
We frequently change purchase conditions, but not that frequently for cases like perishables, so sales price calculations needs to be done each time. This means pricing worklist generation and release is done often and then sales price recalculation is done each time article wise and for various organization level.
We have 15000 articles for which purcahse conditions changes, it is impossible to generate and release pricing worklist and do sales price calculation for each article
So solution may be to find a FM/BAPI for the following transactions and automate them.
Do you know FM/BAPI for VKP5/VKBP or VKP6, WVN0, WVN1 transactions.
Regards
Bob

HI Madhu,
Thanks for the reply,
I am looking for BAPI or FM which will check all pricing condition types( like MRP of the Material(table A304), discounts(A800,A802,A803,A804) for that customer and Tax) and give me the value(KONP-KBETR).
I can only pass Customer, material, quantity etc.. so that BAPI or FM has do all standred checks/ validation and give the
KONP-KBETR for all condition types like MRP, discounts, Tax. we are developing the custom program for sales order creation so we require the all this before saving the sales order.
Regards,
Nagesh
Edited by: nageshdb4u on Mar 5, 2011 12:05 PM

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

NEED BAPI FOR SALES CONTRACT CREATION AND EXTRACTION FOR Trans- PA41& PA43

Hi All,
I need the BAPI for T-code PA41 and PA43 for sales contract.
i would like to extract all the contract details for Contract data contains Table VEDA. And need to create contract.
Any body please help me out...
Please give me code if any one have how to do mapping ..
Thank you,
Vishnu.

Hi Vichu,
Please search on SCN.
Regards
Abhii

Is there any Bapi for assigning CreditcontrolArea to Salesarea

Hi Experts ,
Is there any Bapi for assigning CreditcontrolArea to Salesarea
Thanks in advance

Hi Mugu,
WELCOME TO SDN.
refer to the BAPI below:
BAPI_MATERIAL_GETBATCHES
Create Batch List for a Material
to display:
BAPI_MATERIAL_DISPLAY Display Material
refer to the link below for other BAPI's:
http://www.sapbapi.com/bapi-list/
With luck,
Pritam.

BAPI for Transaction Codes FMV1 and FMZ1

hi,
is there any bapi for transaction codes FMV1 and FMZ1?!
please advice!
thanks JE

HI,
For FMZ1
use this
FMFR_CREATE_FROM_DATA
FMFR_CHANGE_FROM_DATA
FMFR_CHANGE_COMPLETION_FLAG
Regards
Hiren K.Chitalia

BAPI for assign equipment to a class

Hi SDN,
I need assign an equipment (table EQUI) to a class, using BAPI (as CL24N - Assign Objects/Classes to Class ).
Can you please help?
Thanks in advance,
Best Regards,
Maria João Rocha

Hello,
have a look at the following thread. There're some function modules that should fit to your requirements:
BAPI for CL24N
Best regards
Stephan

BAPI for Assigning multiple ship to party for customer

Hi experts,
I need a bapi to assign different ship to party for a customer.
I have tried SD_CUSTOMER_MAINTAIN_ALL but not working properly.
Kindly suggest the solution.
Regards,
Nitin.

Hi,
For the maintenance of customers, there is NO BAPI and NO direct function module.
There are some functions modules like the one above where the name is looking nice. But these should not be used.
Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See [note 384462|https://service.sap.com/sap/support/notes/384462]
Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
Hope this helps
BR
Alain

RFC- Bapi - For Role Maintenance (Single and Composite)

We are in the process of developing an ASP.NET web application which will be used to raise requests for user and role creations in SAP.
We will be making use of Sonic ESB to update SAP through IWAY SAP adapter.
IWAY SAP adapter supports RFCs, Bapis & IDocs.
We are aware of RFCs that could be used for user creation, updating and deletion.
We have NOT come across any RFCs or Bapis for role maintenance
1) We would need RFCs for the following requirements:
1) To create a new role (single or composite role ).Creating a new role would include adding transactions to a role, deriving from an existing role or assigning more than one role to another role.
2) To update a role
3) To delete a role.
4) To get the details of an existing role
If there are no RFCs for the above requirement, will we need to create a custom RFC?
If we need to create a custom RFC, are there any transactions already available for the above requirements so that we could write a RFC wrapper?
2) Are there any RFCs that would give us the complete list of roles (single or composite) in an SAP system?
3) Are there any RFCs that would give us the complete list of transactions in an SAP system?
Presently for 2) & 3) , we are making use of RFC_READ_TABLE to read SAP tables to get the list of roles and transactions.
Thanks for your answers

Hi,
check these FM , i dont know it will work for u or not.
BAPI_USER_ACTGROUPS_ASSIGN     User: Change entire activity group assignment
BAPI_USER_ACTGROUPS_DELETE     User: Delete entire activity group assignment
BAPI_USER_CHANGE               Change User
BAPI_USER_CLONE                Create User with Template in Another System
BAPI_USER_CREATE
BAPI_USER_CREATE1              Create a User
BAPI_USER_DELETE               BAPI to Delete a User
BAPI_USER_DISPLAY              Display Users
BAPI_USER_EXISTENCE_CHECK      Check a user exists
BAPI_USER_GETLIST              Search for Users
BAPI_USER_GET_DETAIL           Read User Details
BAPI_USER_INTERNET_CREATE      Create a user in the Internet
BAPI_USER_LOCACTGROUPS_ASSIGN Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_LOCACTGROUPS_DELETE Delete Activity Group Assignments in the Dependent Systems
BAPI_USER_LOCACTGROUPS_READ    Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_LOCK                 Lock User
BAPI_USER_LOCPROFILES_ASSIGN   Change Profile Assignment for Dependent Systems from Central System
BAPI_USER_LOCPROFILES_DELETE   Delete Profile Assignments for Dependent Systems
BAPI_USER_LOCPROFILES_READ     Change Activity Group Assignment for Dependent Systems from Central Sy
BAPI_USER_PROFILES_ASSIGN      User: Assign profiles
BAPI_USER_PROFILES_DELETE      User: Delete All Profile Assignments
BAPI_USER_UNLOCK               Unlock user
Reward points if useful..
Regards
Nilesh

Adf bc jar for base entity classes and extending them existing project

Hi,
I am using jdev 11.1.1.0 and have created a base workspace/project and adf jar for my base entity classes.
1. I can consume this base adf bc jar in a separate new consuming workspace and create VO based on base bc classes or create new EOs that extend base bc entity classes.
2. Furthermore, for an existing consuming project that earlier included src/ of base entity (BC components), i can remove the dependency on bc source and bring in this new adf jar and everything including the view controller and the service/datacontrol works fine.
The issue i am running into is as follows.
- In the existing project (#2) above i try to create a couple of entities based on entities in my base jar; associations are automatically brought in. Note i am not overriding any attributes. My intent here is to generate .java and implement some code.
- I then try to make my existing VOs based on the newly extended entity (VO overview->Entity Objects-> Shuttle NewEntity from Available to Selected)
- I then try to remove the old EO from selected under VO overview->Entity Objects->Shuttle OldEntity from Selected back
- I get a warning dialog box that says something to the effect that some viewlinks are dependent on these old EOs in this consuming project.
- I tried to laboriously analyzed dependencies and it this dialog box does not make any sense as I have already extended EOs and the tooling should be able to let me use these
My questions
- Why I am not able to remove old entities from VO dependencies
- Is it ok to leave the old EOs in "Selected" along with the newly extended EO ? What are the implications for this?
- I also thought about extending base associations, but did not go anywhere.
In general, I am ok with consuming an ADF BC jar that has entities etc. but not clear about removing dependencies of base EOs on VOs when entities are extended and consumed in a pre-existing project that used base entities.
I can send a project if any PM is willing to take a look at it.
Thanks,
ps:
I have already gone over the following info
http://technology.amis.nl/blog/215/organization-of-bc4j-domain-eo-and-business-vo-package
.. wants to create an enterprise data model in BC4J, reflecting the Enterprise Data Model set up in the RDBMS. All (or at least most) business rules will be implemented in the Middle Tier – to take the load of the database and also allow developers not comfortable with PL/SQL to define and maintain the business rules. It is clear that this means that all applications that need to access – and manipulate – the database, need to go through the BC4J foundation layer. Martijn wants to define the Entity Objects – and their business rules – only once and share that definition between different projects. Each projects can create its own ViewObjects on top of these shared Enterprise Entity Objects.
http://radio-weblogs.com/0118231/2005/09/29.html
I am currently working on a project for a partner where we will be using ADF BC as our model layer for a large application. In order to keep the footprint of each application module down to a reasonable size, we are intending to create a number of separate 'root' application modules for each functional area of the application. Within, these 'root' application modules we will then use nested application modules to further partition the application. All of the application modules will be accessing the same datasource and will need access to the same database objects.
In order to separate our code between the development team and into function areas, our initial thoughts were that we would create an ADF BC model project containing Entity Objects for all of the database tables e.t.c. as these are common amongst all functional areas. We have configured all of the EOs for validation rules, defaulting values and extending doDML() as appropriate. Happy at this stage we then created a simple .jar file to deploy all of the definitions. Upon creating a new ADF BC project for each functional area we added the jar file as a library import into the new project. However when we the tried to create some new View Objects via the JDev Wizard we were unable to see the imported Entity Objects.
Is the only way to share Entity Object definitions between different ADF BC projects to manually copy the source definition files into the new projects src directory? Since this would mean multiple copies of the same components, it could prove to be a maintenance nightmare.Is there a way of doing it without creating multiple copies of the same object definitions?
The developer is spot on in their ideas of layering and reuse, and even has created a library for their reusable entities. This last step is not something everyone thinks to do. The missing step is known as "importing" components, so with that one extra bit of knowledge under his belt, he should be able to do exactly what he envisions. My little article called Difference Between Adding and Importing Business Components tries to explain the difference and gives the menu options to choose to perform the importing.
Difference between adding and importing BC4J
http://radio-weblogs.com/0118231/stories/2005/08/11/differenceBetweenAddingAndImportingBusinessComponents.html
Working with Libraries of Reusable Business Components
http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/bcadvgen.htm#CHEFECGD

Hi,
since you followed the OC4J developer guide I think this question might be better handled there as well
OC4J
So in case you don't get an answer here on the forum, try it on the OC4J forum
Frank

List display for ALV using class and methods

Hi friends
I want the list display for the ALV using Class and methods
which class and methods i can use.
Here we can't use the REUSE_ALV_LIST_DISPLAY and also GRID
I was done GRID display using class and methods but i want only list display for using class.
plz Give me sample code of list display not for grid.
Thanks
Nani.

hi
please check with this code...
declare grid and container.
DATA : o_alvgrid TYPE REF TO cl_gui_alv_grid,
o_dockingcontainer TYPE REF TO cl_gui_docking_container,
i_fieldcat TYPE lvc_t_fcat,"fieldcatalogue
w_layout TYPE lvc_s_layo."layout
If any events like double click,etc., are needed we have to add additional functionality.
call the screen in program.
Then , create the container as follows
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_dockingcontainer
EXPORTING
ratio = '95'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
ENDIF.
CREATE OBJECT o_alvgrid
EXPORTING
i_parent = o_dockingcontainer.
Build the fieldcatalog
create a output structure in SEll for the ALV output
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = <alv output>
CHANGING
ct_fieldcat = i_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i030."Error in building the field catalogue
LEAVE LIST-PROCESSING.
ENDIF.
*If you need to modify the field catalog,modify it using field sysmbols
*setting the layout
w_layout-grid_title = title.
w_layout-zebra = 'X'.
then displaying the output
CALL METHOD o_alvgrid->set_table_for_first_display
EXPORTING
i_save = 'A'
is_layout = w_layout
CHANGING
it_outtab = i_output[]
it_fieldcatalog = i_fieldcat[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i032 ."Error in Displaying
LEAVE LIST-PROCESSING.
ENDIF.
*After that in PAI of the screen, you need to free the *object while going back from the screen(according to *your requirement)
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
PERFORM f9600_free_objects:
USING o_alvgrid 'ALV' text-e02,
USING o_dockingcontainer 'DOCKING'
text-e01.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*in the program, write the follwoing code
FORM f9600_free_objects USING pobject
value(ptype)
value(ptext).
DATA: l_objectalv TYPE REF TO cl_gui_alv_grid.
CASE ptype.
WHEN 'ALV'.
l_objectalv = pobject.
IF NOT ( l_objectalv IS INITIAL ).
CALL METHOD l_objectalv->free
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
CLEAR: pobject, l_objectalv.
PERFORM f9700_error_handle USING ptext.
ENDIF.
WHEN 'DOCKING'.
DATA: lobjectdock TYPE REF TO cl_gui_docking_container.
lobjectdock = pobject.
IF NOT ( lobjectdock IS INITIAL ).
CALL METHOD lobjectdock->free
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
CLEAR: pobject, lobjectdock.
PERFORM f9700_error_handle USING ptext.
ENDIF.
WHEN 'CONTAINER'.
DATA: lobjectcontainer TYPE REF TO cl_gui_container.
lobjectcontainer = pobject.
IF NOT ( lobjectcontainer IS INITIAL ).
CALL METHOD lobjectcontainer->free
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
CLEAR: pobject, lobjectcontainer.
PERFORM f9700_error_handle USING ptext.
ENDIF.
WHEN OTHERS.
sy-subrc = 1.
PERFORM f9700_error_handle USING
text-e04.
ENDCASE.
ENDFORM. " f9600_free_objects
FORM f9700_error_handle USING value(ptext).
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = text-e03
txt2 = sy-subrc
txt1 = ptext.
ENDIF.
endform.
also check with this
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
dinesh

BAPIs for populating Industry Sector and Material Type dropdowns

Hi all,
I have a requirement to create WebDynpro appliation,
which is the replica of MM01 Transaction page.
In the first page i want to populate Industry sector
values and Material Type values in 2 dropdowns.
Can anyone please tell me what are the BAPIs i need to
call and how to find the required BAPIs?
Thanks

You can use the function module RFC_READ_TABLE. The tables that you need to read are T137 for industry sector and T134 for material type.
Regards,
Rich Heilman

BAPI for assigning models to the Product

Hi
We are trying to create some product locations which are not there in SAP R/3.
Is there any BAPI which can be used to assign models to the created products ?
Thanks and Best Regards
Mitesh

Hi Mitesh,
You can use '/SAPAPO/DM_MODEL_ADD_PROD' for assigning the models.
( /SAPAPO/MOD_VERS_BEGIN_ACCESS and /SAPAPO/MOD_VERS_END_ACCESS function modules can be used for locking and unlocking the models).
Regards,
Siva.

FM/BAPI for assigning a class and value instead of manualy doing in IE02

Similar Messages

Maybe you are looking for