FM/BAPI to get and update serial number of a material

hi all,
Can anybody tell me is there any FM/BAPI to get the serial number of a material (Tcode :IQ03) . FM/BAPI for updating the same.
Your help is very much appreciated.
Thanks in advance.

hi
Use this FM
SERIAL_NUMBER_GET_MATERIALS
REWARD IF IT IS HELPFUL.
Thanks
Siva kumar

Similar Messages

  • I have licensed Lightroom 5.6 and my serial number.  I want to install it on a new computer.  I can get nowhere using Adobe site as it is all Creative Cloud related.  I never had to use CC before.  All I want is to install my already purchased Lightroom o

    I have licensed Lightroom 5.6 and my serial number.  I want to install it on a new computer.  I can get nowhere using Adobe site as it is all Creative Cloud related.  I never had to use CC before.  All I want is to install my already purchased Lightroom on new computer (without deactivating on old computer)

    you may as well install the later lr 5.7.1 rather than 5.6 and then updating.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can i get a new serial number for Adobe CS6 Design Standard for Students and Teachers?

    I have had to re-install my Adobe CS6 Design Standard for students and teachers after having problems with my computer (MacBook Pro)
    I am wondering if there is a way to access my old serial number from when I originally installed CS6, or do I have to start over again and get a new serial number?
    Help is greatly appreciated!!

    You normally use the same serial number that you are first issued.  If you registered your product when you first installed it then you should be able to find your setial number available thru your Adobe account online.

  • I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

    I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

    Hi James ,
    Make sure you are entering the correct serial number.Try it once again and check.
    If it fails please get in touch with Adobe Support.Here is the link for the same.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • I can't get the entire serial number off my 5s.I do not have the original box or paperwork.All I find at ABOUT is the first nine letters and numbers followed by three ...-please help.

    5s,64 GB, with IOS 8.1.3, seems to have battery draining problem I just became aware of after just acquiring this phone. I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---Need  to get this info to check with Apple and see if this phone indeed has this draining  battery issue and get it repaired. Tried using info from the Apple site to get the entire serial number and couldn't get it to work. Thanks for all help.

    rjcurtis wrote:
    ---Need  to get this info to check with Apple and see if this phone indeed has this draining  battery issue and get it repaired.
    What “draining issue”?
    The iPhone 5 has a battery replacement program but it does not include the 5S.
    I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---
    See this -> Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support
    "On most iOS devices, you can tap Settings > General > About to see your device's serial number, IMEI/MEID, and ICCID. If you're using iOS 6 or later, you can tap and hold on the number to use the copy option, then paste this information into Apple registration or support forms."

  • I am trying to activate our adobe in-design and we are getting a message "serial number you provided is valid but a qualifying product could not be found on this computer"

    I am trying to activate our adobe in-design and we are getting a message "serial number you provided is valid but a qualifying product could not be found on this computer"

    Hi there!
    Are you certain that the serial number is for InDesign? And the correct version?
    Please feel free to PM me if you wish to verify the serial number.
    Thanks,
    Amy

  • How to get MAC address list and HDD serial number from Windows and MAC machine?

    Hi,
    I'm developing a AIR application. I'm implementing the product key mechanishm. I need to identify the users' machines uniquely. I chose MAC address would be a better way. But a computer has list of MAC addresses including LAN card and Wi-Fi card addresses. So, I need to get the list of available MAC addresses from the computer and the Hard Disk Drive's serial number. HDD serial number would be helpful to cross verify the identity.
    I'm able to get the MAC address using NetworkInfo class. But I need to get a list of available MAC addresses and HDD serial number.
    Is there any classess to accomplish this task?
    Thanks in advance.

    See if this link can be of a little use to you.
    http://www.adobe.com/devnet/air/flex/articles/retrieving_network_interfaces.html#ionComHea ding

  • HT3053 i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some o

    i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some one who formatted the hard desk and i tried to talk to any one from apple but it seems no one care i spent 4 years to be able to buy this mac and i dont know what to do > i will never buy mac again please some one tell me what to do dvd is not working i press on options and nothing happen what showld i do ? through it ? some body tell me what to do or where to go

    Just to make certain, you inserted the original installation disk and started the MBP holding down the C key?  Did the Optical drive reject the disk or did it just spin?  If the former, the lens in the drive may be dirty and needs to be cleaned.  If the latter, you will have to take it to an Apple repair facility.
    Ciao.

  • I bought the product and got serial number but when  install i get a 7 day trial

    i bought the product and got serial number but when  install i get a 7 day trial

    Sign in or activation errors
    For anything else contact serial and activation support directly.
    Mylenium

  • How to get Physical Address and Volume Serial number of system

    Hi Experts,
    Is there any method or FM by which I can get System's Physical Address and Volume Serial Number ?
    I want to validate a report specific to a system.
    Regards,
    Nitin Karamchandani.
    Edited by: Nitin Karamchandani on Dec 30, 2009 2:36 PM

    Hi,
    By using the below statemnt you can achive all the details of SM04.
    DATA :   USR_TABL       TYPE USRINFO    OCCURS 1 WITH HEADER LINE.
    CONSTANTS: OPCODE_LIST                     LIKE TH_OPCODE VALUE 2.
    DATA : TH_OPCODE(1)         TYPE X.
    * SM04 session details of users logged accessing SAP APO
      CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_LIST
        ID 'TABUSR' FIELD USR_TABL-*SYS* .
    READ TABLE USR_TABL WITH KEY BNAME = <USer-name>.
    by double clicking this you can get the all the detsils of the User.
    regards,
    Prabhudas

  • Updated serial number and it needs the previous serial number. I don't have that because this is the first light room I have.

    Hi I just bought an Adobe photoshop lightroom 5 from amazon. It just came in the mail, and I am trying to install it. What I am having problem is the serial number. As I put the serial number in it says that this is an updated serial number and it needs the previous serial number. I don't have that because this is the first light room I have.

    You purchased the wrong license. You should have purchased Lightroom at the full price. I don't know what the Amazon price is, but Adobe sells it for $149. You will have to contact Amazon and see if there is any way you can exchange for the right license.

  • I cannot get a working serial number for Elements 9. Adobe and Dell keep sending me back and forth

    Elements 9 worked fine. It had been preloaded by Dell. I had a hard drive go bad and put in a new one. When I re-installed it Elements said the serial was invalid. Dell says it is an Adobe license and I must deal with them. Adobe sent me to the point of purchase (Dell). Dell says the yellow sticker on the disc sleeve was attached by Adobe and the serial number on it was assigned by them. If that is the case Adobe should rectify this. I paid for a product and nobody has been willing to help me out. I've spent 2 hours going back and forth with Adobe and an hour with Dell. This crap is giving me an upset stomach.

    and it's not likely anyone in a forum can solve this for you.
    you might let someone else try entering that license number (should be 6 groups of 4 digits).  sometimes the fingers and brain do and see something repeatedly and miss the obvious.
    Error "The serial number is not valid for this product" | Creative Suite

  • I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

    I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107  I am using a windows based system

    If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative  application installed including Creative Cloud desktop application.  Then install CS6 and use your CS6  serial number during the install to activate CS6 standard or extended which ever the serial number is for.   CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates.  Windows should update to version 13.0.1.3 Mac to version 13.0.6.  Not Subscription CS6 version 13.1.2...
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Lightroom not reading correct data for Lens and Camera Serial Number

    Hi you all.
    Recently got Lightroom, and I'm so impressed - I never imagined image organizing and adjustment could be this easy and at the same time very advanced.
    I have a problem, however. Lightroom (and Adobe Bridge, too) does not correctly read the EXIF data of Lens type and Camera Serial Number.
    The first ~50 images I took and imported turned out correctly and displayed my serial number and lens (18-55 mm Canon) inside Lightroom.
    But now, whenever I import photos into Lightroom or view them with Bridge, they all display "Unknown Lens" and "Unknown Camera Serial Number".
    At first I thought that maybe the camera didn't correctly record this data on to the photos anymore for some reason, but a comparison using EXIFToolGUI shows that the metadata is EXACTLY the same as in the photos that display this info in Lightroom correctly.
    I have not done any changes to either my camera (Canon EOS-350D / Digitial Rebel XT) or lens (the kit lens, 18-55 mm Canon).
    It seems that for some reason, Lightroom has stopped reading these two fields of metadata - all the other fields, such as aperture and shutter speed, all display correctly.
    I also tried to reimport the photos into Lightroom, but it didn't help. Neither did "Synchronize Folder" -> "Scan for metadata updates".
    What should I do? I'd like my lens information do display correctly, as I'll buy a new lens soon.
    I have attached one of the photos that Lightroom doesn't read the data correctly from. Try importing it into your Lightroom, and see if how the info displays.
    Thanks in advance.

    Are these jpgs or RAW?  I have only edited metadata on jpgs.
    It looks like Vista's import stripped out all the makernotes.  I didn't look at your file but that seems to be what happened.  Be warned, Photoshop CS2 also strips out makernotes!
    Now how to fix the problem.  If you want to edit the metadata on files already loaded into LR, you need to write out your metadata to the files first, then edit the metadata, then read the new metadata into LR.  This is scarey for me, so I always make sure my backup is up to date on the images first.
    What to do...  You probably can't put back all of the makernotes, so what to do to get the lens information in.  I don't know if putting back in the makernote LensType would trigger LR to reconsider its lens information.  I don't know.  If it had a real lens name, my guess would be no because it would have an XMP::Lens field which would override.  But maybe unknown lens doesn't have this field and it would re-read the makernotes.
    The other solution is to forget about makernotes for these images and put the exact text you want into XMP::Lens.  I think that's the "easy" way.
    In either case, you will have to become familiar with exiftoolGUI or exiftool itself.  I use the command line exiftool but it looks like you can edit multiple files with exiftoolGUI.  Select your files, click the edit thingy (^) under XMP, choose various, and there is lens.  Put in the text you want.
    I would do this with one file first.  If the lens shows up after you read the new metadata into LR, you know you have it right.
    Note, exiftool can write backup files for each file.  This makes too much of a mess for me.  I prefer to copy the directory first (I have copies anyway, I just have to make sure the backups are up to date).
    Good luck!  I'm struggling with a similar situation where the same lens used by two different cameras is coming out with a different name.  I need to go back and "fix" the names in the images already imported, and then develop my procedure for setting a single unique name before I load new images into LR.  Not too much of a problem because I'm loading in GPS information anyway...  What's another call to exiftool...
    Judy

  • Updating serial number single edition app?

    Hello,
    SO I designed an app for a client. They wanted to use single edition. I built the app out and put in the serial number from adobe. After building out the app and testing it we realized we needed to make some changes. SO the changes have been made. Everything is finalized and approved. I went to rebuild the app. I can't, it needs an updated serial number. Ok, not a problem...I asked this question on this forum earlier and was told to contact tech support and they would handle this.  They haven't helped at all. They said that the single edition doesn't support updating an app. They said that we need to use the professional edition. Look, I understand why they don't let people constantly update the single edition app. But we haven't even published this app to the Apple store yet. We built a test app and upon realizing we needed to fix a few things, want to just simply update it so we can actually publish it. Everybody we talked to today has nothing to offer in terms of help.
    We called the sales phone number. They have no idea what is going on. They don't even know the cost of the professional Edition. We ask them for a page where we can look at pricing. Oh guess what, that page doesn't exist yet. I guess they haven't gotten around to having a page where people can compare pricing options.
    The client is getting frustrated and so am I. Can anyone help me contact someone who knows what they are talking about as far as reissuing a serial number for a product that hasn't even been used to publish an app in the app store yet?
    And yes, I know that the CC subscribtion makes more sense. I didnt make that call. The client did. He made it based on the non-help of the sales team at Adobe when he decided to make this app. Just looking for a little help from anybody so we can wrap this project up.
    I have already suggested the next time that he join the CC. That doesnt help us right now.
    Thanks.

    Hi 5rockets I've PM you with more details

Maybe you are looking for