FM/BAPI to update the rate category for the device/installation
Hi,
I need to update a new rate category for a device.
Please let me know if there is BAPI/FM which will update the rate category for a device.
Regards
Shiva
Hi Shiva,
First of all, can you clarify if you want to update the rate category - Is it at the Installation Level or at the Device Level.
For updating the rate category at the installation level, go to Business object INSTLN,and then make the necessary changes in Change Installation without dioalog.Pass the input parameters as required for the Method.
If you find this answer helpful, please reward points.
Amitav
Similar Messages
-
Need name of a function module or BAPI to update the Tax Classification val
Hi Guru's
Need name of a function module or BAPI to update the Tax Classification value for Material master.
Thanks in advance.Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max -
FM'S or BAPI to update the condition records in VB22 transaction
Hi,
I need your help in getting the FM'S or BAPI to update the condition records in sales deal.
The transaction is VB22.
If you can send me a smaple code it will be really helpful.
Regards,
SasiCheck this:
http://www.sapnet.ru/viewtopic.php?p=1644
Bapi for VK11 & VK12
Reddy -
FM or BAPI to update the database table /TDAG/CPT_DEC_IN
Hi All,
I need to update a few entries in the database table /TDAG/CPT_DEC_IN (CP: Declarable Substances, Independent attributes). This table contains data for the EHS ( Environment, Health and Safety) Module in SAP.
Instead of doing a direct database update, I needed a FM or a BAPI to update the same.
Any pointers towards this will be really useful.
Thanks and Regards,
Arti DohareHi Raymond,
Thanks for the reply. it seems I was using the wrong BAPI then.
I actually created the network using the BAPI "BAPI_BUS2002_CREATE".
This BAPI does not have the field call "Resp. cost cntr" in its input parameters and so I could not pass it there. Now I am trying to find if there is any standard FM or BAPI to maintain this field in the networks.
I request you to please suggest some FM or BAPI if you know.
Thanks and Regards.
Piyush R Sakharkar. -
BAPI to Update the OA/PO with the new partners from vendor masters
Hello All,
We got a requirement to update the Contract or purchase order with new partners from vendor master.
In brief the partner information of a PO when created with reference to a contract will be reflected from the contract but not from Vendor Master partners .So when the vendor master got changed after the creation of the Contract the partner information in the PO is not in synchronous with Vendor Master partnes.
Hence please help us with any BAPI to update the PO partners with Vendor masters .
Regards
KalyaniMAP2e_lfa1_to_bapivendor_04
MAP2e_lfa1_to_bapivendor_05
will be helpful -
Is there any standard BAPI to update the standard transaction GS03 ?
Is there any standard BAPI to update the standard transaction GS03 ?
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 16, 2011 2:02 PMhi,
I think this link will help you to find that.
list of all bapis:
http://www.planetsap.com/LIST_ALL_BAPIs.htm -
Hi i need help on BAPI to Update the ADRT & ADR6 tables
hi,
i need help on BAPI to Update the ADRT & ADR6 tables
these are the fields to be updated
ADRT-Remark Table
ADR6-SMTP_ADDR
ADR6-DFT_RECEIV
Please guide me what parameters to be passed to update
ADR6 & ADRT tablesLook at this function Group
<b>BUBA_3 SAP BP: External BAPI Function Modules </b>
BAPI_BUPA_ADDRESS_ADD SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_GETDETAIL SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_REMOVE SAP BP, BAPI: Delete Address
BAPI_BUPA_ADDRESSES_GET SAP BP, BAPI: Determine All Addresses
BAPI_BUPR_CONTP_ADDR_ADD SAP BP, BAPI: Add Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_CHANGE SAP BP, BAPI: Change Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_GETDETAIL SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_REMOVE SAP BP, BAPI: Delete Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_ADD SAP BP, BAPI: Add Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_CHANGE SAP BP, BAPI: Change Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_GETDETAIL SAP BP, BAPI: Read Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_REMOVE SAP BP, BAPI: Delete Employee Relationship Address
BAPI_BUPR_EMPLO_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
Look also at OSS <a href="https://service.sap.com/sap/support/notes/306275">Note 306275 - Transferring address data</a>
Regards -
Need F.M or BAPI to update the table IFLOT---URGENT
HI ALL,
i need F.M or BAPI to update the table IFLOT
its urgent ........................use the function module
EXIT_SAPLITO0_001/2
www.jt77.com/plant-maintenance/quality-management-11667.html - 11k -
reward if useful -
A FM or BAPI to update the status of a Production Order
Hello, does anybody know if there is an interface FM or BAPI to update the status of a production order. Specifically I want change the status of PP order to LKD (locked). I want to do it programmatically from an external system.
Thank you
ErnestoHi,
I believe you can use the FM I_CHANGE_STATUS to update the status..
where JEST-OBJNR = AUFK-OBJNR
Thanks,
Naren -
I did every step including reinstall intunes to get my IPod touch to sych with Itunes but it fail to recognize it as anything other than a camera. It still recognize my Ishuffle as a device. The Genius bar as an Apple store told me the Ipod worked on their Apple PC, my pc is not an apple, I attemped every step to rectify the situation including updating the device drivers. I wonder if I need to eliminate every old residue with the word Apple in it on my computer to get it up and going again. Please help !
If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iphone 4 keeps shutting down since i updated the device
I updated my iphone 4 and now the phone is shutting down whenever I attempt to use an app. For example, I went to use my camera to video my daughter's bedroom, and the phone shut down on me and did not come back on for about 15 to 20 minutes. Why is this happening? The phone was working properly before I updated the device.
I'm not looking for any warranty help or something, I just want a diagnosys of my phone's situation....
My phone is acting as if there was no battery in the phone. When there is no cable plugged, nothing happens. When there is a cable, something happens (not a lot though....).
Could it be the battery port on the motherboard that's down ?
PS : I've taken a Genius-bar appointment because I can't stand in that situation for years, so I'm not absolutely looking to gain money and avoid Apple's official help. -
I bought iPad April 2 in the past, but I can't update the device to the new version of what
I bought iPad April 2 in the past, but I can't update the device to the new version of what
What version do you have? The latest is 4.3.5. iOS 5 will be available next week.
-
UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES
HI IM USING IPHONE 4 PLZ
UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES
BLUETOOTH APP COMPLETE IPHONE MAKE NO 1 SMART PHONE ERVER
plzThese are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/iphone.html
-
BAPI to upload facts @ rate category level
Dear ABAPers,
is there any function module to upload facts value at rate category level in ISU..
I got BBAPI to upload Installation facts in ISU..
Please help me..Hi Shiva,
First of all, can you clarify if you want to update the rate category - Is it at the Installation Level or at the Device Level.
For updating the rate category at the installation level, go to Business object INSTLN,and then make the necessary changes in Change Installation without dioalog.Pass the input parameters as required for the Method.
If you find this answer helpful, please reward points.
Amitav -
BAPI to update the bulk component in the packaging order.
Hi ,
I am working for the process order.
I want to update the bulk component in the packaging order with the goods receipt batch number of the bulk order.
Is there any BAPI that I can use for updating the bulk component or I need to use the BDC?
Regards,
Kiran KumarHi Kiran kumar,
As per my knowledge, there is no BAPI for process order component update
you need to use BDC for this
regards,
sankaran
Maybe you are looking for
-
Problem in leave request configuration
Hi, i am configuring Leave Request in EP6.0 using workflow template WS20000081. In the Portal side i am able to send a leave request successfully, but <b>i am not able to receive any notification in the Universal Worklist</b>... can anyone please sug
-
I am using asha 201. I couldn't install Google Map. Which version of Google map is suitable for this handset & wherefrom can I download this app. Thank You
-
CFBuilder 3 loses second server settings on cfbuilder exit/restart
I have two servers which I have connected to the cfbuilder. First one is localhost, which works okay, even debugger. Second is vmware XP image, which i can connect to the builder via new add server setup window. settings: Name:Vmware XP type: Other h
-
How to install new features or shortcuts?
At home, I am using ColdFusion Builder 1.0 When I have a file open and press ctl+shift+O, it outputs this <cfoutput></cfoutput> or writeOutput(); When I have a file open and press ctl+shift+a, it outputs this: <cfabort> or abort: When I have a file
-
hi friends, I have question with struts collection. I have a colletion called chapters which contains about 10 items(strings) , i am displaying these items in jsp with iterate tag and displaying the collection items , one on each line.. now i want to