FM - FM_REVERSE_CLEARING_FI used for...

Hi....
I want to know what is the functionality for the function module FM_REVERSE_CLEARING_FI.
Is it used to Reverse the document or clear the document.
Thanks,
Sandy

Hi
FM_REVERSE_CLEARING_FI is the FM:
Core Component of Clearing Reversal:
It means Means you have created a clearing doc for an FI document
to reverse/cancel that clearing doc which you created it is used.
Regards,
Sreeram
Message was edited by:
sree ram

Similar Messages

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

I have one apple ID for my MAC and another used for both my iPhone and IPad. Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

I don't remember my old Apple ID and I closed my email account that I was using for my old Apple ID. Now, how can I change my icloud id on my Ipad. The old icloud id is still on my Ipad.

I don't remember my old Apple ID and I closed my email account that I was using for my old Apple ID. Now, how can I change my icloud id on my Ipad. The old icloud id is still on my Ipad.

ChrisJ4203,
Thank you for the help. Every app on my phone was downloaded using my old I-tunes ID. I just hope that they will re-download under my new ID because I still can't change it on my phone. In order to change to the new ID it says I have to sign out from the old ID and change to the new one. My problem is that I don't remember my password to be able to sign out from my old ID. Then the phone says it can change my password through e-mail and I agree but I never get an e-mail at my old address or the new one.
BHuyett

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing. It instructs me to uninstall & reinstall...

I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

I have an SD card that my husband uses for a trail camera. The camera does not have a delete function for the pics, so I put the SD card in our MAC and we can view the pics but when I go to delete them it says that the files cant be deleted. What can i do

My husband has an SD card he uses for his trail camera. We put it in our mac book pro and can look at the pictures but when I go to move them to the trash it tells me that the files can't be moved to the trash because they cant be deleted. I have Nikon camera software on my mac and it pics up and asks if you want to import the pics and if you want them deleted from the devices afterwards. I tried that but I get a message afterwards that says that some files were not able to be deleted. When I go to check, none of them were deleted. How can I clean of the SD Card? I do have a camera I could stick it in, it would just be nice to know how to do it from my mac. Also, the files are jpg. if that matters.

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

I am trying to save memory on my iPhone 4S/ ios6.
1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
2) Can I back up the newsstand to iCloud and save memory on the iPhone?
3) Can I back up the bookshelf to icloud and save memory on the iPhone?

1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Looking for help on what Hardware to use for FCS

I am looking to set up a shared storage for use in a small editing network and I am having a hard time getting my head around what exactly I need.
I have 4 edit stations that currently run externals. I am looking at a solution like FCS to centralize all the captures and media to edit from. We usually edit Apple Pro res and DV footage.
My understanding is that we need to connect to the storage using Fibre to get the bandwidth needed. My issue is wondering exactly how much hardware I need to get this done and what the layout of this hardware should be.
I currently have a Mac Pro that could be dedicated as the server running FCS. I plan on buying a Fibre connected storage RAID and outfitting the 4 Mac Pros in the office with Fibre cards. I am guessing I need to connect all of this with a Fibre switch. Is this all I would need? Would I be able to capture and edit off of the RAID using this configuration? What else would I need?
I have been looking for diagrams or some type of examples of configurations people have use and not been able to find much. Any advice would be great
Thanks

Steve Price wrote:
XServe, Promise RAID, QLogic Sanbox 20 port fiber switch, XSAN software, 5 Mac Pro Fiber cards.
That's pretty good, assuming you have the numbers right. You need Xsan software and a Fibre Channel card for every computer connecting via FC (the Xserves and Mac Pros). Note that the 20 port switch has 16 usable ports, and each storage or computing device should connect to two ports, so you've basically filled it up with what you've listed.
I also have an XServe that is on the (10 GB ethernet) network (in another building on campus) that is currently being used as a login/account manager (could it be used for metadata as well?).
It would be good to use this as the failover MDC to support the one you are purchasing. Can you relocate it so it is physically closer? It should be Intel. It is not recommended to have the primary MDC perform directory or other services, but some people do this (at a slight risk) on a secondary server.
Will I need to reduce one of the Mac Pro editors to merely a metadata controller (leaving me with 4 editors)?
Not recommended, except maybe as a backup.
Can I use the existing network for the LAN and METADATA Switches?
You'll need a separate network for metadata traffic. This can be physical or virtual (on higher-end switches).
@trezero-your list is the first I've seen with 3 XServes. Is this just because of FCServer? Can you not use the MDC or one of the networked editors?
FCServer warrants its own machine since it is fairly CPU intensive, especially if you are doing transcoding on it. In high performance environments people will add a second machine just to do rendering.
Don't put any other server process on the MDC. You could use the backup MDC for FCSvr, but this isn't recommended since if it gets failed over to, then it is no longer the backup, and you're again risking your Xsan integrity on a shared system. In an educational lab setup where the risk of downtime is not an inconvenience, you could probably get away with it.
You would probably benefit from either taking the Xsan class or working with a professional systems integrator. I'm based in the Southeast and can refer you to a few people if you contact me offline.

Unable to Get the Data Using For All Entries

Hi everybody, i am using for all entries in a program. but when i am writing a code using for all entries i am getting an error as
Where condition does not refers to the FOR ALL ENTRIES tables...
SELECT KUNNR
       NAME1
       ORT01
       LAND1
   FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
        ERDAT
        KUNNR
   FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = IT_KNA1-KUNNR.
ENDIF.
can anybody help out in this
regards
hyder ali

The correct one may be like this:
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = ITAB1-KUNNR. "modified here
ENDIF.
Edited by: XuJian84 on Mar 9, 2010 4:25 AM

URGENT:HOW TO COMBINE CLUSTER AND TRANSPARENT TABLE..WITHOUT USING FOR ALL

how can we join bkpf and bseg without using FOR ALL ENTRIES.HOW DO I COMBINE THE 2 TABLES SO THAT I GET BETTER PERFORMANCE.
START-OF-SELECTION.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bkpf-bukrs AND "COMPANY CODE
belnr = i_bkpf-belnr AND "A/CING DOC NO
gjahr = i_bkpf-gjahr AND "FISCAL YEAR
hkont = p_hkont. "General Ledger Account"
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bseg
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
ENDIF.
IF NOT i_bseg1[] IS INITIAL.
LOOP AT i_bseg1.
IF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'S'.
v_sumgl = v_sumgl + i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'H'.
v_sumgl = v_sumgl - i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont NE p_hkont .
IF i_bseg1-shkzg = 'H'.
i_bseg1-dmbtr = - i_bseg1-dmbtr.
ENDIF.
i_alv-hkont = i_bseg1-hkont.
i_alv-dmbtr = i_bseg1-dmbtr.
APPEND i_alv.
v_sumoffset = v_sumoffset + i_bseg1-dmbtr.
ENDIF.
ENDLOOP.
regards
Essam.([email protected])

Hi Friend,
I see your code.. there is no other way than using for all entries for your situation.. how ever i saw ur code and a small recommandation in the change of code.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
if not p_hkont is initial.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
i_bseg[] = i_bseg[]1.
delete i_bseg where hkont ne p_hkont.
else.
Your existing logic...
endif.
In this way you can avoide writing two selects on bseg..
Thanks
Mahesh

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

FM - FM_REVERSE_CLEARING_FI used for...

Similar Messages

Maybe you are looking for