FM for assign employee user name to Business partner (employee) in BP t.cod

Dear alll
I need fm / bapi for assigning employee (user name) to business partner in identification tcode in BP tcode. Any one help me?

Hi Saumya Govil
I have used
1. BP_BUPA_GET_HROBJECT to get the person number based on PARTNER_GUID.
2. pass this person number to FM BP_CENTRALPERSON_ASSIGN_USER to assign user ID.
Instead of the creating new central personal number i have used above BP_BUPA_GET_HROBJECT fm.
Thanks for your quick reply.

Similar Messages

User name in Business partner

Hi All,
Please tell in which table the <b>user data</b> in Identification Tab of Business partner is getting updated.
Urgent help required.
Regards
Arun Kumar
Points will be awarded.

HI Arun,
Please call FM BP_CENTRALPERSON_GET input Business Partner no..
we you get the user details on Identification tab of a BP.
Siva

BP: can't edit "user name" field in section "employee data"

Transaction - BP, tab - identification, Change in BP role - employee.
why i can't edit "user name" field in section "employee data"?
Field is unchangeable only for one in a ~800 BPs.

Earlier it is possible to change the User ID field.
Guess that this might be ur prb
If this BP is used somewhere else I mean in some transaction/CRMD_ORDER/Support message,so it might be not possible to change this now....becuase the log will become incosistent.
for e.g. if in ticket XXXX i have been assigned as reporter as...BP no 10
Later you are assigning this to no 10 to some other person or ID ....
Then the log of CRMD_ORDER or ticket will become inconsistent because the BP is now assigned to a different person who never worked on the same.
Actualy i have faced this query during one implementation that why we are able to change the UserID of existing BP even if it is used in some transaction/message.
Might be this is a new correction in the recent release.
Regards
Prakhar
Edited by: Prakhar Saxena on Jan 16, 2009 10:10 AM

Preparing the Assignment of the BW/SUS User to a Business Partner ID

Hello people, i need help in this following scenario...any help would be
deeply appreciated.
When a new user is created in the
SAP SUS system, it will automatically be created in SAP
BW,
too.
At the same time, an internal table (SRM_USER_SUPBPID) is filled automatically. The table
contains the assignment between the automatically created
SAP BW user and the
corresponding Business Partner ID of the supplier company.
Procedure
Make su...
1. Make sure that the BAdI SMUM_USR_CREATE_POST has been transported into your
SAP BW system and has been activated. This BAdI is required for the automatic
creation of a
BW user.
Menu Path in the BW System Transaction Code
Business Add-Ins: Initial Definition
Maintenance Screen
SE18
2. Make sure that the implementation RSSBR_SMUM_CRM_SUS for the BAdI
SMUM_USR_CREATE_POST is activated in your
SAP BW system. To activate it, use
transaction SE19, enter
RSSBR_SMUM_CRM_SUS and click on Change . Then choose
Activate
. This implementation is necessary for the assignment of the SAP BW user to
a business partner in the internal table.
regards
sandeep salaria

hi,
In Web UI scenario:
If you have BuilEmp object, then you can get BP_NUMBER using the relation BuilEmpToHeaderRel.
for ex:
lr_header ?= lr_builemp->get_related_entity( iv_relation_name = 'BuilEmpToHeaderRel' ).
lv_bp_number = lr_header->get_property_as_string( iv_attr_name = 'BP_NUMBER' ).
regards
Ismail

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

http://techobar.blogspot.com/2012/11/unlocking-lock-pattern-after-too-many.html
Or this site.
http://about-google-android.blogspot.com/2013/04/how-to-unlock-android-phone-when-forgot.html

Using JCom for getting the user name

I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html

Hi.
You might have better luck posting this in teh jcom newsgroup.
Regards,
Michael
Manoj Gupta wrote:
I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html
Michael Young
Developer Relations Engineer
BEA Support

I am trying to add a wireless printer and it keeps asking for an "Ipadmin" user name and password rather than my adminstrator password. Any ideas what this is??

I am trying to add a wireless printer and it keeps asking for an "Ipadmin" user name and password rather than my adminstrator password. Any ideas what this is?

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

Hello there, Ark.
It sounds like the iPhone has Activation Lock still activated. The following Knowledge Base article provides the methods available for removing the previous owner's account:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Assign Address Name in Business Partner with UI API

Hi all,
I want to assign an address to a Business Partner before is added with UI API.
The code I use is:
Dim Source As SAPbouiCOM.Matrix
Dim EText As SAPbouiCOM.EditText
oItem = oForm.Items.Item("69")
Dim oMatrix As SAPbouiCOM.Matrix = oItem.Specific
Dim ocol As SAPbouiCOM.Column
ocol = oMatrix.Columns.Item("20")
ocol.Cells.Item(2).Click(SAPbouiCOM.BoCellClickType.ct_Regular)
oItem = oForm.Items.Item("178")
Source = oItem.Specific
EText = Source.Columns.Item("1").Cells.Item(1).Specific
EText.Value = cardname
When I try to assign to EText.Value it prompts me an error that item is not editable.
Am I missing something??
Many Thanks,
Lena Apostolou

Hello Lena,
here is a code sniffet, which is working....
If pVal.FormType = "134" Then
            If pVal.BeforeAction = True And pVal.ItemUID = "1" And pVal.EventType = BoEventTypes.et_ITEM_PRESSED Then
                Dim oForm As SAPbouiCOM.Form = sbo_application.Forms.GetForm(pVal.FormTypeEx, pVal.FormTypeCount)
                Dim oMatrix As SAPbouiCOM.Matrix = oForm.Items.Item("69").Specific
                oMatrix.Columns.Item("20").Cells.Item(oMatrix.VisualRowCount()).Click(BoCellClickType.ct_Regular)
                oMatrix = oForm.Items.Item("178").Specific
                Dim oEditText As SAPbouiCOM.EditText = oMatrix.Columns.Item("1").Cells.Item(1).Specific
                oEditText.String = "asdasdas"
            End If
        End If
Regards
J-

Display Org Unit based on User logon in Business partner creation..

Hi Gurus,.
I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data. When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai. How to address this scenario thro standard customization?
Is it common problem in CRM Webui(6.0 and 7.0).
My Org Structure:
Global
China
     Shangai
     Beijing
   Nanjing.
Thanks in Advance....

Hi Varma,
From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
Hope this helps.
Thanks,
Samantak.

How can I assign CC User Names to Edit Rooms instead of actual people

My television station just purchased 21 seats of Premiere Pro CC for Edit rooms, live trucks, and portable laptop editors. These seats will not be assigned to specific perple but rather to whoever happens to be assigned to the edit room, live truck, or laptop editor for that day. When I click on Assign User for a product the first thing I am asked is for an email address. Of course these rooms and trucks do not have email addresses. Can I assign user names such as KSAZ-EDIT12 without email addresses? Is there a better way to deploy this software into these areas? Will these areas need Internet connectivity to use Premiere Pro CC? Our live trucks do not currently have Internet connectivity.

Hi,
It does not seem a big deal to add the missing lines to your output file.
For instance, the following awk command should do the trick
cat search.out
dn: gci=-1,ou=people,o=xxxxxxxx
userpassword: xxxxxxxxxxxxxxxx
cat search.out | awk '/userpassword/ {print "changetype: modify} ; print "replace: userpassword"; } {print $0}
dn: gci=-1,ou=people,o=xxxxxxxx
changetype: modify
replace: userpassword
userpassword: xxxxxxxxxxxxxxxx
Then you can use ldapmodify to apply your changes
-Sylvain

HT1349 my icloud and itune are not syn icloud is asking me for a different users name and password than itune i am lost and loosing info what can i do to syn itune and icloud .

what can i do to syn my icloud and itune to one account?. In which i would only need one username and password.
When i had setup icloud before i had to use a different email and password and now i can not retrieve nor update
my account, it keeps telling me that my username and password is incorrect.

Sign in with the correct user name and password for the iCloud account.
This has nothing to do with them being "in sync".
iCloud and iTunes accounts, which are simply Apple ID's, cannot be merged. There is no way to merge Apple ID's. If you chose to set up the device using one Apple ID for iTunes and another for iCloud, then that's the way it is.
Alternatively, you could sign into iCloud with the same ID that is used for iTunes. Whether this creates problems or not depends on how you currently have iCloud set up.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

How do I sort by employee last name when grouped by employee id?

Hi,
The first Group is: Employee ID.
The second Group is: Employee Last Name.
I wish to sort the entire report by Employee Last Name; however, standard crystal reports sorting functionality doesn't present me with this ability. As a result, the report is sorted by Employee ID.
Can someone help me how to sort by Employee Last Name in this scenario?
thx,
Mark

Hi Mark,
When you create a Group in the report, Crystal reports automatically adds the grouped fields in the Sort list which unfortunately cannot be removed! You cannot change the priority of the sort fields too, and the only way of achieving this is by actually changing the group order. But it wouldn't help the purpose.
As a workaround, here's what you can do though:
1) Create a command object and provide a pre-sorted result set to Crystal Reports. In this situation you would probably create a command object like :
select Emp_ID, Last_Name from Emp order by Last_Name asc
2) Create the 2 groups in the report again. Open the 'Group Expert', click on the first group and then click 'Options'
3) The Sort order for this group would be 'in ascending order' by default. Change it to 'in original order'
4) Repeat the above step for the next group
This is the only way I know of sorting a report on another field.
Let me know how this goes!
-Abhilash

How check the user roles in Business Partner edition screen?

Hello Masters,
I'm having a little problem figuring out how to check the user roles to allow modification in some fields.
At the 'Manage Organizational Data' screen ('Manage Business Partners' -> Business Partner Data -> edit). I need to check the user roles to let him change the 'Tax Numbers' values. The values can be changed only if the user is a administrator; otherwise it must only show the value.
I checked the HTML Template and found where I can restrict this edition option, but the problem is that I don't know how to check the user roles here. Maybe there is a function to do this?
Any ideas of how I can do it? Is there any magical BAdI to check this?
Thanks in advance,
José Omar

Hi José Omar,
there is no BADI for this...
You have to change the standard code to display only tax data if the SY-UNAME does not have correct role.
You can retrieve user roles with BAPI_USER_GET_DETAIL, or access directly the activity groups table.
Rgds
Christophe

FM for assign employee user name to Business partner (employee) in BP t.cod

Similar Messages

Maybe you are looking for