FM for CONTITION TYPE

Hi Friends,
    I Have a condition type(KSCHL) PR00, ZMUP.
    i want the amount for the condition type
    is there any FM
Thanks & Regards,
Vallamuthu.M

Hi,
   You dont actually require a function module for this.
Just do a simple select on table KONV for field KWERT( Condition amount ).
Check the sample code below.
Data: begin of it_table,
         kschl type kschl,
         kwert type kwert,
         end of it_table.
select kschl
          kwert
          from konv
          into table it_table
          where kschl eq ( Condition type1 , Condition type2 ).
Now the internal table it_table will have the condition amount for the corresponding condition type's Condition type1 and Condition type2.
Reward if found use full...
Cheers,
Rama Murthy.P.

Similar Messages

A realistic assessment of your experiences of hardware needed for the type of editing I do please.

Introduction:
I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build. I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system. For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled. Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced. However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising. So it's time to take the plunge for me and upgrade.
My current hardware for editing:
I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with. I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory. The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5. At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one. In addition I use a SATA Quickport duo attached to my laptop via an eSATA card. However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
The type of editing i do:
I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos - see here for examples of the type of editing I currently do:
http://www.youtube.com/user/PathfinderPro
The equipment test videos place the biggest strain on the hardware when editing. And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality. To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format. However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade. My problem is though I'm uncertain what path to take. The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not. This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build. I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
The type of system I'm thinking of:
So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
- Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
- X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering). As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
- 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
- Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
- Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
- Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
- Power source - I'll work out when I've decided on my components.
Help please:
For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in. As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
what system setups people use now for doing similar editing to me
what make/models of the component parts in your system work well together
and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to (not a dream model change, just a practical and realistic one)
I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop. Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
Thank you very much for any help / experiences people can share.

Thank you both for your prompt and helpful replies.
Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use. I have seen a video you posted here - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx. This still makes me lean towards the i7-39xx.
Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board. However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added. For example this video at approx 2 mins 50 and 5 mins 10 seconds.
http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
Monitor wise I use dual monitor setup. My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing. I won't be using more monitors than 2. If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup. Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
"Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7. I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
Thanks again for your help but I'm still unsure a bit about the CPU and video card though.

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Issue while posting using goods issue for delivery type NL

Hello Experts,
I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery)
When i am trying to post the goods issue from supplying plant, I am getting following error
"Account type K is not defined for document type WL".
Delivery type NL should not be used to issue stock to vendor but I am not issuing it to any external vendor , issuing the stokc only to a receiving plant.
Please help to understand why i am getting this error.
Regards,
Nish.

Hi,
If you are doing an STO Scenario, Check whether you have created the supplying plant as a vendor.
The Vendor Account group should be plants.
Also check whether you have given the plant in the vendor master Purchasing Data - Extras tab in the menu click on add purchasing data & check.
If you haven't assigned this, do the same & create a fresh STO & check.
Hope it will work.
Thanks & Regards,

[svn:bz-trunk] 11030: Tweak the deserialization of ASObjects to treat an empty string for the type of an object as null .

Revision: 11030
Author:   [email protected]
Date:     2009-10-20 11:35:02 -0700 (Tue, 20 Oct 2009)
Log Message:
Tweak the deserialization of ASObjects to treat an empty string for the type of an object as null. It appears that there is some logic in the LC remoting code that relies on a non-null class name to always exist. This change reverts to the old behavior of not allowing empty string as a value for the ASObject.namedType.
This should fix bug 2448442 and its duplicates caused by the recent serialization changes.
I don't think this is the perfect fix. Pending further investigation, a better fix would be either:
a. If it's OK to assume that empty string should always mean null for the type of the ASObject, the code that enforces it should be in the setter/getter inside ASObject and not in the deserializer.
b. ASObject doesn't guarantee that a named type exists or is valid. In that sense an empty string is as bad as some random characters that cannot be a valid class name in java, so depending on how disruptive it may be, the fix should be in any logic that uses ASObject.getType().
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java

Hi Pavan,
"In your payload there is no namespace prefix for the elements under PayloadHeader element."
Yes, you are right - but this message is standard AQ Adapter Header message - it's not defined by me. I just used message which was automatically added to my project when I have defined AQ Adapter.
"In your process is the default namespace is same as namespace value of tns ??"
Do you mean targetNamespace? If yes it's different as it points to process "targetNamespace="http://xmlns.oracle.com/PF_SOA_jws/PF_APPS/APPS_PROCESS" (names of application and process have changed as I try different ways to do that)
ns1 is: xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/aq/PF_SOA/PF_APPS/PO_AQ"
"another thing is tns and ns1 should have same values.."
When I create a variable of header type, namespace ns1 is automatically created for it. I set it as property of receive activity. When process is instantiated on the serwer I get the error in which you can see that namespace is tns.
Maybe I'm doing something wrong but I don't see how I could fix this in my process.
You can see that the message I get on the server has nothing in common with the application/project/process names. Is it possible to define such variable?
Regards
Pawel
PS:
In Transformation xsl file, both variables (source and target) has tns namespace for Header and PayloadHeader, and no namespace for subfields.
Edited by: pawel.fidelus on 2010-01-05 02:37

Material number is blank in FBL3N for doc type SA

Hi,
If posting is coming from SD or MM module, the material number is reflected in FBL3N for GL acct "Material price variance". But when the posting is coming from FI, the material field is blank.
But in another company code, when postings are from FI, the material field is correctly populated.
I have already checked and verified that BSEG-MATNR was defined as a special field. I have also ran RFPOSXEXTEND and BALVBUFDEL but the material field from FI posting is still blank.
The FI posting involves filling up the material or product number in the profitability segment amongst other fields and then system will do a derivation.
Can someone point me to the right direction on how to get the material field populated by an FI posting?
Thanks and regards,
Thess

Hi,
The material field should appear in FBL3N for all types of postings, provided it got populated. Can you please check, whether material field is getting populated in BSEG table for that document # ? If the material is not getting derived, then it won't appear in the report.
Best Regards,
Madhu

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Field Selection error for movement type and G/L account

I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many Thanks

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

Report for wage type with number, amount and amount per unit?

Hi friends.
I would like to know if there exits a report for wage type (like the PC00_M99_CWTR) that shows the number (anzhl), amount per unit (betpe) and the amount (betrg) of a person for a specific wage type.
The standar report PC00_M99_CWTR does not display the amount per unit (betpe).
Thanks in advance.
Albio.-
Edited by: Albio Manuel Vivas on Oct 20, 2011 6:13 PM

Thanks,
could you tell me what transaction i'll should use?
thanks in advance
Albio.-

REPORT FOR INFO TYPE 586

Hi All
I am trying to create a report for INFO TYPE 586 in HR ABAP,where in a table apporx 30 investment codes , proposed investment and actual amount are apperaring .
Now My problem is, I do not want to use IF .... ENDIF statment. Is there any other way to write the code .
Please Help.
Thanks in advance.

Hi,
In this situation you can use field-symbols and/or a internal table. Like this:
tables: pa0586.
field-symbols: <ff1> type any,
               <ff2> type any,
               <ff3> type any.
data: w_campo1(30),
      w_campo2(30),
      w_campo3(30),
data: w_nx(2) type n.
data: begin of i_myitc occurs,
        itc like pa0586-itc01,
        dsc(30),
      end of i_myitc.
* fixed selection or may be from a z table
i_myitc-itc = '01'. i_myitc-dsc = 'AAAAA'. append i_myitc.
i_myitc-itc = '02'. i_myitc-dsc = 'BBBBB'. append i_myitc.
i_myitc-itc = '03'. i_myitc-dsc = 'CCCCC'. append i_myitc.
select single * from pa0586.
do 30 times.
   w_nx = sy-index.
   concatenate 'PA0586-ITC' w_nx into w_campo1.
   concatenate 'PA0586-PIN' w_nx into w_campo2.
   concatenate 'PA0586-AIN' w_nx into w_campo3.
   assign (w_campo1) to <ff1>.
   assign (w_campo2) to <ff2>.
   assign (w_campo3) to <ff3>.
   read table i_myitc with key itc = <ff1>.
   write: / <ff1>, <ff2>, <ff3>, i_myitc-dsc.
enddo.
Best regards,
Leandro Mengue

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

In fbl1n report for document type RE withholding tax amount is not showing

in fbl1n report for document type RE withholding tax amount is not showing
in sap note 363309 determines
Solution
Remove the field which contains the withholding tax information (field BSEG-QSSHB) from your display
variant.
If you want to display the withholding tax information, double-click on the document number and
subsequently choose 'Withholding tax'.
my doubt is we remove the field BSEG-QSSHB in layout how can show the withholding tax amount in FBLIN report
how to remove from the layout
please clarefy
bhayyapu

Hi,
If you want to check amounts of withholding tax for the vendors, you have some options to view it. You can access the WITH_ITEM, LFC1 tables by SE16. You have too the S_P00_07000134 report. This report is developed for the Colombia but I already used for the another country with the ABAP development for this country.
Also you can use table join BSIK and WITH_ITEM by SQVI for the open items and BSAK and WITH_ITEM for cleared items. It is more simple and fast.
JPA

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

FM for CONTITION TYPE

Similar Messages

Maybe you are looking for