FM for creating availability

Hello experts,
i´m searching for a fm with which i can create an availability entry in table pa2004.
In SAP standard this action is => transaction PA20 => infotype 2004 => create => save.
I debuged the transaction, but at the and there are only form calls and a hard write into the db.

Hello,
HR_Infotype_Operation doesn´t help a lot. I look for something like BAPI_ABSENCE_CREATE (PA2001) but for infotype 2004

Similar Messages

"No transaction type is available for creating a transaction" service order

Hi all,
I am new in IC .
I try to create service order or service ticket for incoming calls
We are using CRM 7.0
After I confirm the account I try to create service order
But no screen displayed and error "No transaction type is available for creating a transaction" occurs
in customizing there is a transaction type SRVO, also I copied it to ZRVO
But here how can I define that this transaction type is assigned to this application??
Please reply in detail steps.
Thank you.

Hi Rupesh,
Thanks for your reply..
I made a lot of controls but I can't find where I am wrong..
My senario is, taking phones, create interaction record and create order for further investigation.
I copied IC_AGENT role.
I copied transaction type 0010 to Z010
I create business transaction named ZBTP for transaction type Z010
I made Define Transaction Types for Navigation for Z010
Then Define Business Role -> Assign Function Profiles
Here I assign my business transaction ZBTP to IC_BT function profile
But when I connect tot the system with user having this business role
I can create interaction record with type Z010, it is ok.
When I press Service Order it gives this error.
Work center id for Service order is : IC_UIU_SVO
I copied my business role from IC_AGENT, and here this work center id was not active
In my business role I made it active. Is this work center can't used in IC senario
Also how can I understand which transaction type is needed for it??
If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
But nothing changed..
Please help !!

Any bapi available for Create Employee Trip

hi ,
please tell me for Create Employee Trip any bapi is available.
if it is there means please tell me.

Check this one -
BAPI_TRIP_CREATE_FROM_DATA
Regards,
Amit

Available Layouts for Creating Portal Page

Hi, When selecting a layout for creating a Portal Page we are presented with a plethora of available Layouts.
1. What is the difference between the 1 Column (Full Width) and Light: 1 Coumn (Full Width).
2. Why would there be no Layouts with a Row Type Organization. Everything is Column Based. What if I want to Rows?
thanks for any help.

Hi Kenneth,
1. Difference between 1 Column (Full Width) and Light: 1 Coumn (Full Width) is that the second is used for light framework which will not load HTMLB. If you compare the JSP code for the two layouts, the container definition in light layout is not surrounded by hbj tags.
2. As Ajay said, you can add multiple iviews in one container and you get multiple rows in a column. You can always create your own layout which can can have rows as well. One such layout from SAP is T-Layout (Top - Full Width; Bottom - Narrow:Wide).
Regards,
Min

No transaction type is available for creating a transaction (IC WebUI )

Hello,
I'm tying to link WebUI business transactions (create transactions of
business activity, service order, service confirmation)to the IC WebUI.
I linked logical ID to the workcenter and assigned generic OP to the
nav.bar profile and activated workcenter screen in the business role.
I think that WebUI business transaction screen itself is well attached.
But When I click the workcenter(logical ID is directely linked the
workcenter). There are message:"No transaction type is available for
creating a transaction". So, I cannot select any transaction type and
go to the biz.tran.create sceen. there are lot's of transaction type of
business activity.(Appointment). I got the same problem to the WebUI
service order create transaction.
But, Linking WebUI service confirmation creation screen to the IC WebUI is sucessful: I can
select transaction type of service confirmation.
I don't know any difference between them.
If you guys have any idea, please let me know.
Thanks
Mickey.

Dear Kunstelj ,
I found the solution with your suggestion.
But What I did is a little bit different.
I assigned two channel IAC interaction center, IAW Interaction center WebClient to the transaction type not GUI CRM Webclient UI. So It does work!!.
Thank you for your help. I really appreciate it.
Best regards,
Mikyoug Kim.

No transaction type is available for creating a transaction

Hi All,
I have referred the following link
http://wiki.sdn.sap.com/wiki/display/CRM/ActivityTransactionDisplayinNew+UI
However, I am not able to create activity transaction.
It gives message as No transaction type is available for creating a transaction.
I have checked the component BT111M_OPPT and window inbound plug IP_CREATE.
The settings in SPRO are maintained
but still I get the value of   CASE lr_context_node->collection_wrapper->size( ) as zero.
lr_context_node = lr_proctype_popup->get_context_node( iv_cnode_name = 'PROCTYPE' ).
CHECK lr_context_node IS BOUND.
CASE lr_context_node->collection_wrapper->size( ).
    WHEN 0.
      MESSAGE s005(crm_btil) INTO lv_title.
      CALL METHOD lr_msg_srv->add_message
        EXPORTING
          iv_msg_type       = if_genil_message_container=>mt_info
          iv_msg_id         = sy-msgid
          iv_msg_number     = sy-msgno
          iv_msg_v1         = sy-msgv1
          iv_msg_v2         = sy-msgv2
          iv_msg_v3         = sy-msgv3
          iv_msg_v4         = sy-msgv4
          iv_msg_level      = '1'
          iv_important_info = abap_true.
Is there any FM which will fetch the custom transaction types?
Thanks and Regards,
Gauri.

Hi Gauri.
Try to replicate or create the same using the same transaction type from SAP GUI if it is working fine there , issue will be in the web ui other wise the issue will be with IMG configuration.
To get the custom transaction types use the function module
CRM_ORDER_PROC_TYPE_SELECT_CB
if you want to know all process types then use the below function module
CRM_ORDER_PROC_TYPE_T_SEL_CB ( for this FM dont pass any import peramters except language as EN)
Thanks & regards
Raj
Edited by: bmsraj on Aug 25, 2011 9:27 AM

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Longer time for Material Availability check while creation of prd order.

Hi guys,
I am facing a weird problem while creating production orders thru CO01.
I enter the component and plant and I am also using the forward scheduling option.
for some reason, SAP is taking a long time for material availability check when I hit the release button.
Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
Can someone suggest me some tips ??
Thanks & Regards,
Sashivardhan

Hi,
Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
Hope this will help.
Regards,
Navin

BAPI for Creating a PM order(iw34) with reference to a Notification

Hi All,
Could anyone help to find the BAPI for creating a PM order with reference to a notification Number.
I will explain my requirement :
I want to create a notification from an external Application where i got the BAPI BAPI_ALM_NOTIF_CREATE and keeping this created notification number as Referece or for this notification number i need a create a PM order.Usually this process in done transaction IW34 in R/3.
But with the BAPI BAPI_ALM_ORDER_MAINTAIN i can create a PM order but this BAPI doesn't have a input parameter "Notification number ".So i can't use this BAPI.
Could any suggest for a BAPI where i can create a PM order with reference to a Notification Number.
Regards,
Sid

Hi,
I have tried with the FM CO_IH_ORDER_GENER_2 but when i executes it gives a error message
"<i>Service/maintenance order type PM02 not completely maintained in plant
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant</i>"".
And even have a doubt what to enter in this input parameter "GEWRK_OBJTYP" .
Kindly help me to solve this issue.
Regards,
Sid

BAPI For CREATE SALES ORDER WITH REFERENCE TO ORDER

Hi ,
I want to develop a new RFC for 'Creating Sales Order' with reference to another sales order -
Is there any BAPI available for the same ? (Version 4.7) - I know its available for new create and change
but couldn't find for create with reference to Order ...
Thanks in advance ...
Regards
Rajesh.

Hi,
You can use this FM "/SAPNEA/SMAPI_ORDER_CREATE". I haven;t tried this but you can still give it a try. Mention the Reference Order Type and other data in the header work area and pass it to the FM.
Reward if it's useful.
Thanks,
Anil

Web Service for "Creating Sales Order" by using BAPI

Hello All,
I am trying to create a WS for "Creating Sales Order". The corresponding BAPI that I am using for this purpose is BAPI_SALESORDER_CREATEFROMDAT1. I am able to create the Web Service and run the WSDL on WS Navigator.
But there is a problem whil executing the Web Service. In the interface of WS, we can only enter item level details of "Order Partner". So when I enter the details and click on Execute, it returns me an error message "Please enter Ship to Party and Sold to Party". I have already given these details.
Does any one have any idea of what is going wrong?
Regards,
Abhishek

As you suggested i have passed the suggested parameters in item level..But this time i was not ablet to create the SO also..earlier i am able to creat SO but not line item, But now ia m not able to creat salesdocuement also.
Return talbe filled with belwo messages.
S V4                   233 SALES_HEADER_IN has been processed successfully
E V1                   320 No item category available (Table T184 ZKB TEXT )
E V4                   248 Error in SALES_ITEM_IN 000000
W V1                   555 The sales document is not yet complete: Edit data
E V4                   219 Sales document was not changed

Need Ideas for creating and using Custom Business Object

Hello Guys,
I am developing an application which uses a Request->Approve->Create approach for creating Purchase documents.
Now I am a little puzzled about how to make use of the Business Object BUS2014.
The application I am developing has its own unique 'Request Number' (say REQID) which will point to the Request for Creation of a purchase order.
Whenever a Request is created (from a Z-Tcode) a workflow needs to be initiated and it has to be sent to the approver.
The Purchase Document will be created once the approver approves.
Now my confusion here is, if I use BUS2014, the object will be instantiated only during the final step of the workflow. But I need an instance during the beginning of the Requestor ->Approver negotiations as I am playing with events. These events needs an Object_key.
How should I proceed here?
Should I create a new logical Business Object like ZPOREQ where I have the above mentioned REQID as the key?
And should I have an attribute of type BUS2014 inside the custom BO?
How will I make use of the methods like BUS2014.Create etc which I may need to create the purchase document?
Any small direction will be a huge help for me to get used to this wilderness.

Hi,
You should continue with the ABAP class idea. The business objects are kind of "obsolete" already, and if there is a need to create a new "object", ABAP classes are the way to go. Business objects are still useful, but I normally use them only when an existing standard business object fulfills the requirements (possibly with slight additions) which is almost never.
From my point of view you can use the existing class. Depending on the circumstances I normally have just one class that I use for both workflow and the possible other functionality that is required, but you have to understand that I have this goal in my mind already when starting the development process. As your class most probably has many useful features already (such as you have the header and item data as attributes etc. (if I understood correctly?), these are also useful in in workflow (class attributes will be available in WF container etc.).
If you are hesitant to use the same class directly in your workflow, you could also create a new class ZCL_REQUEST_FOR_WF (with the workflow interface), and then simply add your existing class ZCL_WF_REQUEST as an attribute to this new class. Then this new workflow class could include the pure workflow stuff, and your existing class the non-workflow stuff. But this most probably will not make much sense - just implement the if_workflow interface in your existing class (this is just one possibility that you might consider.)
Regards,
Karri

4.6C method for creating a Maintenance Order

Hi,
We have a requirement to create and update maintenance orders on a 4.6C system. The scenario is that we need to programmatically mimic what users can do in IW31 and IW32. The BAPI_ALM_ORDER_MAINTAIN function module is not available on this system (SAP delivered that BAPI in a later version.) We've looked at IBIP but it does not offer structures for order data. Using "call transaction" and BDC data structures directly seems to be an option but difficult to implement and prone to error.
What other options exist for creating/updating maintenance orders on a 4.6C system? Thanks in advance for any information or examples you can provide.
-Jason

Ok. I've actually figured out how this works.
I'll post what I've found out in case it helps anyone else.
The parameters seem to be: ( with my example data in brackets)
I_AUFNR order number
I_VAPLZ work center ( MAINT.)
I_VAWRK plant ( 0001)
I_PLNTY Task list type = ( A )
I_PLNNR Task list group ( 55)
I_PLNAL Task list group counter ( 1)
The problem I have is that this bapi is not released, and it is not remote enabled.
Are there any released BAPIs that would do the same thing?
Or would I need to write my own remote-enabled BAPI that calls this one, and then try to call my BAPI ( using .NET Connector ) ?
Thanks,
Derek

Is there a cook book method for creating an exe out of Teststand ?

I'm trying to port Teststand to a target machine. I want to use LV 6.0 Operator Interface on the target machine also. EXACTLY what steps do I have to preform to get the Operator Interface, all my VI's that Teststand uses in my particular application and all the engines I need to run what was written on the Developmental station onto the Target machine. I couldn't find the operator interface in LV manual and the Teststand book was terrible to follow.

Hello Clint -
The unfortunate problem with the manual is that it has to cover all possible variations of a deployment scenario, and as a result it gets a little jumbled. There is usually a fairly point-by-point document available on the web, sadly it is down this week for edits for new TestStand 3.0 material but I will attach below a word documents with the contents of the tutorial valid for a TestStand 2.0.x / LabVIEW solution as this may help.
In general, the super-short list of events goes as follows:
(1) Deploy TestStand Run Time Engine (use the Wizard in the tools menu)
(2) Use your 'testexec.bld' file (in the OI's folder)as a short cut in LabVIEW for creating a functioning EXE and installer for your interface. Not that this works best if yo
u have a default interface, you'll have to handle any additional files yourself.
(3) Carry your code and support files (this can be integrated into step 1 if you want) however you want.
Naturally the issues arise when you have custom components or nonstandard situations, read the attached doc below for the 'long list' that covers the details.
If you're using TestStand 3.0 there are new tools that can make this process faster/easier but it sounds as though you're working with a fairly finished system so I won't go into those right now. If there is a particular part of the process you are concerned about, feel free to post again and we will focus on just that.
--Regards
Elaine R.
National Instruments
http://www.ni.com/support
Attachments:
Dist_overview_TS2xLV.doc ‏41 KB

Is there PDF convert to MS Office app for business available?

Is there PDF convert to MS Office app for business available?

Just do not expect perfection. The conversion depends a lot on how the PDF was created.

FM for creating availability

Similar Messages

Maybe you are looking for