FM for getting select-options for use in ALV header

Hi All,
Our customer wants the choosen selection options in the report header (ALV). I'm looking for a FM that gets all select-options and puts them in (end-user) readable form.
Anyone experience with this? Or has created such functionality before?
Any help would be appriciated,
Kind regards from a cloude Holland,
Bert Hokojoku

Use the fm: PRINT_SELECTIONS
you can also use this:
    CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
      EXPORTING
        CURR_REPORT     = sy-repid
      TABLES
        SELECTION_TABLE = IT_VARI_TAB
      EXCEPTIONS
        NOT_FOUND       = 1
        NO_REPORT       = 2
        OTHERS          = 3.
Regards,
ravi
Message was edited by:
        Ravi Kanth Talagana

Similar Messages

Alternative for "check select-options" for select query.

hi all,
my report is using a "GET" syntax, followed by "check select-options".
My senior told me to replace the Get syntax with select query.
Now, my program also has dynamic selection screen.
the dynamic selection screen almost has all the fields of database table.
so, what is the way to replace this check select-options while applying select query?
can you tell me how dynamic selection screen fields are populated? are they stored in some internal table?
thanks for help.

HI
Here is some points about LDB.
Logical databases are special ABAP programs that retrieve data and make it available to application programs. The most common use of logical databases is still to read data from database tables by linking them to executable ABAP programs.
However, from Release 4.5A, it has also been possible to call logical databases using the function module LDB_PROCESS. This allows you to call several logical databases from any ABAP program, nested in any way. It is also possible to call a logical database more than once in a program, if it has been programmed to allow this. This is particularly useful for programs with type 1.
Logical databases contain Open SQL statements that read data from the database. You do not therefore need to use SQL in your own programs. The logical database reads the program, stores them in the program if necessary, and then passes them line by line to the application program or the function module LDB_PROCESS using an interface work area
For further on LDB's refer to this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]
Hope this will help.
Reward if helpful.
Sumit Agarwal

Validation of Select Options for a field

Hi All,
I need to write a validation logic for a select option for VTWEG (Distribution Channel).
select-options: s_vtweg for komg-vtweg.
I need to check whether the user has entered the correct value based on the search help. The check table of this particular field is TVTW.
Following is the code i wrote under the AT SELECTION-SCREEN block:
IF NOT S_VTWEG-LOW IS INITIAL.
SELECT SINGLE VTWEG INTO KOMG-VTWEG FROM TVTW
                                 WHERE VTWEG IN S_VTWEG.
IF SY-SUBRC NE 0.
CONCATENATE ' Please enter the correct
                                Distribution Channel '
Z_MSG INTO Z_MSG.
SET CURSOR FIELD 'S_VTWEG-LOW'.
MESSAGE E000 WITH Z_MSG.
ENDIF.
ENDIF.
It works fine when the user enters a wrong value in the S_VTWEG-LOW field, where as if i gives more than one wrong value in the range or giving individual values its not working. Let me know how to do the validation check for multiple values entered individually or in ranges.
Could you please suggest how to resolve this problem.
Thank You,
Suresh

You could do something like this.....here looping at the select-option table and check the values for low and high.
report zrich_0003.
tables: komg.
data: z_msg(100) type c.
select-options: s_vtweg for komg-vtweg.
at selection-screen.
loop at s_vtweg.
    if not s_vtweg-low is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-low.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-LOW'.
        message e001(00) with z_msg.
      endif.
    endif.
    if not s_vtweg-high is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-high.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-HIGH'.
        message e001(00) with z_msg.
      endif.
    endif.
endloop.
Regards,
Rich Heilman

List box for the select-options

Hi All
Can anyone send me a sample code to create a list-box for the select-options.

Hi vighnesh vasudevan,
Do like this for your select options for low and high also.
Parameters:
    p_quat TYPE char20
            AS LISTBOX VISIBLE LENGTH 30
            LOWER CASE OBLIGATORY.
*              AT SELECTION-SCREEN ON VALUE-REQUEST                    *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_quat.
PERFORM fill_quarters.
PERFORM display_quarters.
*&      Form fill_quarters
*       text
FORM fill_quarters .
DATA:
* Field string to fill quarters in the year
    lfs_quarters TYPE LINE OF vrm_values.
REFRESH t_quarters.
lfs_quarters-key = '1'.
lfs_quarters-text = text-qu1.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '2'.
lfs_quarters-text = text-qu2.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '3'.
lfs_quarters-text = text-qu3.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '4'.
lfs_quarters-text = text-qu4.
APPEND lfs_quarters TO t_quarters.
ENDFORM.                    " fill_quarters
*&      Form display_quarters
*       text
FORM display_quarters .
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_QUAT'
      values          = t_quarters[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_quarters
Note: I think we are not able to display the list box for select options because i am not ever seen the list box in select options . No Probs try like above code.
See the following like it may help for you
Listbox for Select Options
Regards,
Mahi.

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M.

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

TS1292 When I go to purchase my song, I don't get the option to use my itune card balance, it only asks for my credit card number, even though I have a $15 balance on my itune card

When I go to purchase my song I don't get the option to use the balance that i have on itune card, it only gives me the option to use my credit card

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Select-options for time stamp

Any ideas on which data element to be used for select-options for timestamp on the screen so that a user is able to f4 help too.
i am using data element 'tzntstmps' but i am not getting f4 help for it.

Hello Trivenn
I do not think it makes sense to search for any other timestamp data element which might be part of a search help.
TZNTSTMPS = UTC Time Stamp in Short Form (YYYYMMDDhhmmss)
How could such a search help look like? A calendar control combined with some kind of "time control"?
You may facilitate the entry of time stamps in such a way that if the user enters only a date in the LOW field (e.g. 20080422 without time) you change it AT SELECTION-SCREEN (PBO of your selection screen to 20080422000000).
Correspondingly, you change a date value (e.g. 20080422) at the HIGH field into 20080422235959).
If, however, the user enters already a complete timestamp you do not change anything.
Regards
Uwe

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Search help for PERNR select options in Webdynpro

Hi,
I am using the method: lv_r_helper_class->add_selection_field
and passing the value:
i_value_help_type            = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
to get search help for pernr select option in the webdynpro application.
But can anyone please tell me what value i have to pass to
i_value_help_id              = ??

hi,
pass your search help name there so that your desired search help ll come there..
use this,
i_value_help_type            = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
i_value_help_id              = 'SEARCHHELPNAME'
if you want standard SH means comment this stmt,
if you dont want SH means,
use tis,
i_value_help_type            = if_wd_value_help_handler=>CO_PREFIX_NONE
hope this helps,
Mathan R.

F4 for employee select options in WD for abap application

Hi,
I have defined a select option for employee selection in my WD for abap application. The only problem is that I cannot get a f4 help button to be displayed. I have defined the select option using the following code :
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
create a range table that consists of this new data element
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'PERNR_D' ).
add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'PERNR_D'
it_result = lt_range_table
i_read_only = read_only ).
I have tried adding entries for the parameter help_id but still cannot get a f4 button.
Thank you in advance for any assistance provided.

Hi,
Try this.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
lo_interfacecontroller = wd_this->wd_cpifc_select_options( ).
DATA lo_r_helper_class TYPE REF TO if_wd_select_options.
lo_r_helper_class = lo_interfacecontroller->init_selection_screen( ).
Creating range table
DATA lt_range TYPE REF TO data.
CALL METHOD lo_r_helper_class->create_range_table
EXPORTING
i_typename = ''PERNR_D'
RECEIVING
rt_range_table = lt_range.
Disabling the global options
CALL METHOD lo_r_helper_class->set_global_options
EXPORTING
i_display_btn_cancel = abap_false
i_display_btn_check = abap_false
i_display_btn_reset = abap_false
i_display_btn_execute = abap_false.
Adding the selection field
CALL METHOD lo_r_helper_class->add_selection_field
EXPORTING
i_id = 'PERNR_D'
I_OBLIGATORY = ABAP_TRUE
i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = 'PREM'
it_result = lt_range.
Check this artcle for more details which uses VBELN as select option with search help.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/103e43d5-fdb8-2d10-90ab-b5e8532cbc04

Select option for date

i want give default values in select option for date (for a period)
I used
SELECT-OPTIONS y_s_mnth FOR y_v_dt_month default first to last OPTION BT.
first and last are dates.
I am getting error dialog box....specify ranges...
Please give sample code..

Hi Suhas,
I hope this code will help you. Reward me if it is helpful.
select-options : y_s_mnth FOR sy-datum.
initialization.
y_s_mnth-sign   = 'I'.
y_s_mnth-option = 'BT'.
y_s_mnth-low    = sy-datum - 30.    "first_day
y_s_mnth-high   = sy-datum.         "last_day
append y_s_mnth.
clear y_s_mnth.
Regards,
Sagar

How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Select option for selection valid and invalid data.

Hi All,
Any one pleas help in validating following case :-
In the selection screen there is a select option for equipment number like EQUI-EQUNR
if any user will give wrong equipment no. It will generate an error message from the range of equipment no.
and put it to an internal table it error.
and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
Iu2019d appreciate if some one help me in generation code for the above case or logic.
Thanks

Hi,
Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
      REFRESH RSPAR.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            CURR_REPORT           = 'prog name'
    IMPORTING
      SP                    =
          TABLES
            SELECTION_TABLE       = RSPAR
         EXCEPTIONS
           NOT_FOUND             = 1
           NO_REPORT             = 2
           OTHERS                = 3.
      IF SY-SUBRC <> 0.
   MESSAGE I000.
      ENDIF.
In table parameter you ll get the all entries entered .
Check out the values with respective tables.If value is not correct tk it into internal table
else proceed ahead. You can Remove incorrect entries this way.
regards,
ajit.

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

FM for getting select-options for use in ALV header

Similar Messages

Maybe you are looking for