FM for Purchase requisition status

Hi,
Is there any FM for Purchase requisition status.
Do let me know.
Regards,
SP

Hi,
Check this FM, hope this will solve ur problem.
'BAPI_ACC_PURCHASE_REQUI_CHEC'

Similar Messages

Release strategy for purchase requisition does not kick in

Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?

Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima.

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

Purchase order number not update in purchase requisition status tab

Purchase order is created for purchase requisition. The purchase requisition is triggered through process order. When I checked purchase requisition details in ME53N status tab, status is not edited and purchase order number also not present.
Kindly let me know the possible reason for this.
Appreciate your help..
Thanks,
SAP PQ

If the PO had been created without reference to the PR, it will not be updated in the PR.
If it has been created with reference to the PR, then the PR number gets updated in the PR status.

Report - who is the current approver for purchase requisition

Hi Experts
Is there a report that can give information the status / who is the current approver for purchase requisition?
currently if we open the PR directly, we can only know the release strategy, release code, status of approver, but we cannot have the information who is the person that should approve this PR.
Thanks in advance
Prashanth.v

Hi All.
Unfortunately we want to have this information for our end user, and they will not have the access to SE16.
Another thinks is from CDHDR we will have the information if changes are made in PR. So it will give information user that already approve the PR
What we want to have is a report of outstanding PR (not yet released) that have information who is the user (the user complete name / user id) that should approve the PR.
Thanks In Advance
Prashanth.Venkategowda

Not updating status of Purchase requisition status

Dear Friends,
Our client has got third party software interface with SAP.We create Purchase requisitions in SAP,doc type-NB and PRs are also created in Third party software and it will create Purchase requisitions with starting with number ZR in SAP automatically.
When PRs with NB type are created and RFQs are created with reference to PRs and POs with reference to RFQs,then status of RFQ and PO is displaying in Purchase requisition status tab at item details.
But PRs created by Interface Purchase requisitions status under item details tab i.e.ZR is not updated with RFQ and PO status.
For updating Purchase requisition status, is there any setting in customisation,the samething we need to do for PRs for Third party soft in SAP.
Please suggest what needs to done
Regards,
Magana

PR active signifies that all relase procedure is complete and the PR is being in use.
Status field indicates whether the PR is in release, prartial release, complete release or whether PR is refused to release.
Soon after complete release status gets chaged to active and if not subjected to release startegy, then soon after completing the creation of PR, status becomes active.

Custom Event for Purchase Requisition Create, Change & Delete

Hello Experts,
I want to create a custom event which triggers on Purchase Requisition Create, SAP provide's standard event's for purchase requisition release but not for create.
What are all the steps and how to create a new event.
Thanks in Adavance,
Sandhya.

Hi Sandhya,
may i know the reason why you are trying to create custom methods.
You have business object BUS2009(for PR line item wise release) and BUS2105(for PR overall release).
Both those business object have events RELEASESTEPCREATED (for PR creation) and SIGNIFICANTLYCHANGED(For PR change).
Even then if you want to create custom events, create a subtype of the standard business object, then click on events, and then select create. Now create your Z-events, say ZCREATED (For creation), ZCHANGED (for changed) and ZDELETED (for deleted). Now select each event, click on edit -> Change release status -> object type component -> to be implemented. Follow the same for all the events. Then select each event, click on edit -> Change release status -> object type component -> to be released.
Now click on your custom object, click on edit -> Change release status -> object type component -> to be implemented.Then click on your custom object, click on edit -> Change release status -> object type component -> to be released.
After this in SWEC tcode, click on new entries. Select change document object as BANF, business object as say ZBUS2105 and event as ZCREATED. make sure radio button on create is checked.
Similary create entries for ZCHANGED event and ZDELETED.
Select on change and on delete radio button for event ZCHANGED and ZDELETED event respectively.
let me know if you have any queries.
Regards,
Raj

"No selectable item exist for purchase requisition I_Banfn"

Dear all
While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
Please help.

Hi,
PR status in status TAB in item details You have following:
Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
Processing State: Released or not Released
You need check above & then act to unblock if blocked , release it if it is not released or check if this PR already converted to PO.
Follow the steps to create PO from PR:
Enter ME21N T.Code
Click u201CDocument Overview onu201D
Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
Now you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
Regards,
Biju K

ALV report for Purchase Requisitions(PR)

Hai All!
i am developing an ALV report for Purchase Requisitions(PR) tht are not approved ( ie IN RELEASE status), so i want to get who has approved PR and who has not approved it... from which table & which field i can get this data...
plz help me

Hi Following fields are used to set / reset release of PR
EBAN-FRGKZ
EBAN-FRGZU
EBAN-FRGST.
You will have to understand combination of these field from MM Fuctional Consultant.
rgds
rajesh
Edited by: RAJESH KUMAR on Aug 6, 2008 12:18 PM

Can't use Overall Release for Purchase Requisitions

I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.

SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
             This procedure is applicable only for Purchase Requisitions.
             Here PR is released Item by Item only.
Release Procedure with classification
            This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
            Item by Item and Header level releases can be configured
            For PR - both item by item and Header level release can be configured
            For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
            1) Total value of PR more than Rs 50,000
               create characteristic as "Release_PR_total_value" in transaction code CT04.
              Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
              Tab -values key in > 50000 INR
              Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
              Tab - Restrictions - class type - 032 - Release strategy
            2) Plant
                 Create characteristic "Release_PR_plant" in transaction code CT04.
                 Tab - Basic data - Data type - CHAR; Number of chars - 4
                 Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
                 Tab - Additional data - Table name CEBAN and Field Name is WERKS.
            3) Purchaisng Group
                 Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
                Tab - Basic data - Data Type - char, Number of chars eg. 3
                Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
                Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user            - Level -             Release code
PR creator - clerk or Business user -
Approver    - Supervisor                 -   R1
Approver -   Project Lead              -   R2
Approver   - Asst. Manager             - R3
Approver   - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil

NO Approved found for Purchase Requisition

HI,
we have a case, employee belongs to company B and raising the PR for company A. when he / she was initiating the PR. it says "NO Approved found for Purchase Requisition". we are following the Position Hierarchy. we have only one hierarhy for the two companies Can only please let me know how to sort the issue.
regards

Hi,
Are you using positional Hierarchy for approval for your Purchasing? Please check what is the final approver's approval limit/Position
and how much he can approve ?
You will get "No approver found" when system failed to find a approver based on the amount/position in your PR/PO.
Moreover, Please review the following MOS doc.
How To Diagnose Deferred Purchase Order And Requisition Workflows? [ID 884391.1]
How to Diagnose No Approver Found (Document Status Remains Incomplete with No Action Taken) and Build Default Approval List Failures in the Purchasing Approval Workflow [ID 295153.1]
HTH
sd

Materials available only for Purchase requisition creation

Hi Experts,
My client wants some materials available only for Purchase requisition creation and some materials donu2019t want available only for Purchase requisition creation.
How we can control
Thanks in advance,
Chandhu

1) Solve your issue first you have to bifurcate between the materials where requisition is possible & where not...u can do this by selecting some field which is not in use presently in material master-basic data view & maintain some unique value for those materials for which PR will be not possible....otherwise check whether you can bifurcate it through material groups or not...
After this take help of your ABAP person and implement BAdI::ME_PROCESS_REQ_CUST...here use the logic that after user enters the material code in PR system will check in the background what has been maintained in the said field in the basic data view of the material...if found blank then it will allow the user process further or if found any data in that field then system will stop the user from processing the same by throwing some customized error message.
2) Use the Plant-sp.matl status in purchasing view as Blocked for procment/whse for those material against which you don't want to create any PR.But this will be plant specific and both PR & PO will get blocked.
Regards,
Indranil

How do I enter Document Type for Purchase requisition IDOC

Hello,
File - IDOC (PREQCR.PREQCR02)
The file is getting picked up and shows up a checkered flag in Moni..
but in WE05, on R3 side, i see an error message
"Enter Document Type"
How do I enter document type for Purchase requisition IDOC?
will that solve this issue?
thanks and regards
Nikhil.

Hi,
For error 51, you need to set the default document type in the inbound processing FM of the IDOC
Standard type - NB
Subcontrator type
Blank PO
Service PO
Stock transport PO.
Document types is used for below things,
1. It controls the no. range of the document i.e. the doc no.
2. It controls whether doc no. is auto assigned or manually entered
3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
4. It controls the physical doc filing
Thanks
Swarup

Table for purchase order status

Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
Bahia

Hi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik

Table for Purchase Requisition Item Text

I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?

Hai,
the table is STXH.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
CLIENT                        = SY-MANDT
        ID                            = IT_STXH-TDID "ID
        LANGUAGE                      = IT_STXH-TDSPRAS " LANGUAGE
        NAME                          = IT_STXH-TDNAME
        OBJECT                        = IT_STXH-TDOBJECT
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
      TABLES
        LINES                         = L_LINES
Regards,
Venkat

FM for Purchase requisition status

Similar Messages

Maybe you are looking for