'FM HELPSCREEN_CREATE is  obsolete in ECC 5.0 version'

Hi all,
I am upgrading SAP from 3.1I to ECC 5.0. I am getting the error that  'FM HELPSCREEN_CREATE is now obsolete in ECC 5.0 version'.
can anyone suggest the equivalent FM for the above in ECC 5.0.
thanks
Rakesh

Hi Rakesh,
Im using ECC 5.0 version, it is not telling this FM HELPSCREEN_CREATE is obselete.
Regards,
Senthil

Similar Messages

  • This Funtion POSTING_INTERFACE_START is Obsolete in ECC 6.0

    Hi,
    Someone know if this function is obsolete in ECC 6.0
    Wait you help.
    Thanks

    No, it's still used, but it's not released for direct customer use either...

  • ACCMAP: Obsolete in ECC.. Any other wayout possible??

    Hey Guys
    A. Prior to ECC version, say, in 4.7 - There used to be a T code ACCMAP.. Here in, my client did as below
    Company code 2030
    Dep Area 01: Book dep Area
    Dep Area 20: Parallel dep area
    Dep Area 55: Delta Dep Area..
    Company code 9030
    Due to ACCMAP settings, when AFAB is run in 2030, it posts the Dep Area of 01 + Dep Area of 55 to Company code 9030 in Spl Purpose Ledger 
    B. Our client has just upgraded to ECC 6.0 and still not using New GL...
    C. Now in ECC, the ACCMAP is no longer availalbe as SAP says you can map Dep Area to parallel ledger... But our requirement is to map Dep Area 55 of 2030 to Dep Area 01 of 9010 company code
    Is this no longer possible in Standard SAP?
    Do we have any other way of doing this?? (Since the comp code 9010 not only manages the asset related postings but also many other postings, it will be very difficult to migrate from using a New Company code to using a Parallel Ledger in same company code)
    br, Ajay M

    Hi Ajay,
    I can provide you some background information regarding ACCMAP that may help for better understanding:
    Why is ACCMAP (concept of the accounting principle) obsolete in ECC 6.0. and why it is no longer needed? It was used in previous releases to "filter" which values and from what depr.area should go to the special  ledger. In this way, let´s say, you linked the depreciation area to the accounting principle and this to the special ledger in order for the information to flow from the specific area to the specific "special ledger".                                                                               
    This logic has changed. Now you link the depreciation area to the parallel ledger directly in OADB (no need of accounting principle).                                                                               
    The parallel ledger solution is, in fact, a development of the special  ledger concept.                                                                               
    I strongly advise you check SAP's online documentation in the SAP library under:                                                                               
    Asset Accounting (FI-AA) > Integration > Parallel Ledgers in Asset     
    Accounting.                                                            
    Regards,
    Brigitte

  • How can we find the obsolete data dictionary objects in ecc 6.0 version

    My Question is How can trace the obsolete data dictionary objects in ecc 6.0 version such that we could
    anticipate the obsolete objects before upgradation.
    Regards,
    Raghunadh Babu.

    Hi Raghunadh,
                        The data dictionary objects will be in the repository itself if activated.If the data dictionary objects was created by user and if it is not activated.In this scenarion the data dictionary object can be seen in object navigator.Please check the transaction SE80 and SE81.
    Hope your query resolves.
    Have a best day ahead.

  • Creating report using reportpainter in ECC 6.0 version for finance

    Hi Experts,
    1.In my report i have to include check number from fchn into standard t code fagll03 based on document number in both tcodes
    for this i don't  know what  i have to fill in library , report and copy from  in " Report painter: create report" screen.
    2.I want report painter material for ECC 6.0 version  for creating finance reports because  i am confused what to enter  in" report" option and "copy from" option regarding my issue in ECC 6.0 version where as in 4.7 there is no such kind of option in initial screen of creating reports.
    3. please guide me what necessary steps to take in my issue
    Regards,
    naresh.

    Hi
    Are you getting the output or not?
    You can just ignore this warning in EPC
    as this FORM USER_COMMAND  is always called indirectly only
    But check the Output and see?
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to set up ALE between 4.7 and ECC 6.0 version

    Hi,
    We are running on 4.7 EE version of SAP with all main modules. Now we are building another system for HR module in ECC 6.0 version of SAP.
    Now the requriement is all the HR transactions posted in ECC 6.0 version shoule be moved to 4.7EE SAP system. For that i need to set up a ALE between ECC 6.0 and 4.7EE.
    So please hlep me the process flow to set up this. Is there any pre-requisites?
    Please suggest me..
    Thanks
    Yadayya

    Hi Yadayya,
    Please follow the link below for details:
    <link to blocked site removed by moderator>
    You can easily transfer IDoc's from 4.7 to ECC 6.0
    Regards,
    Pranav.
    Edited by: Thomas Zloch on Oct 18, 2011 2:09 PM

  • Call Transaction XK02 in SAP ECC 6.0 Version

    Hi All,
    I am working with an object which calls a transaction XK02 to modify the name and contact details fields in Version SAP ECC 6.0.
    The problem is that, when the transaction is run manually and saved or when an SHDB Recording is created, the data is getting updated.
    But when the transaction is called from a program or when the SHDB Recording which is already created is run, the data is not getting updated in Version SAP ECC 6.0.
    The data is getting updated properly when it is done in Version SAP 4.6b.
    Central Address Management System is used here.
    The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
    The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
    If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
    In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
    There is a slight change in the logic in SAP ECC 6.0 version.
    Can anybody please help me in this regard?
    Thanks & Regards,
    Vaitheeswaran.

    Hi Prabhu,
    The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
    The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
    If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
    In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
    There is a slight change in the logic in SAP ECC 6.0 version.
    Thanks & Regards,
    Vaitheeswaran.

  • Screen Exit / Badi for VF01 in ECC 5.0 Version

    Dear experts,
    I want to add some customized field(Bill of lading date) to the screen of billing header and the field should be displayed in the screens of t-code VF01 and VF02 always.
    I found that the BAdi: BADI_SD_CUST_HEAD
    But When I try to  create implementation for the Badi. The following error is coming Badi definition  BADI_SD_CUST_HEAD is only provided for SAP internal use. Our client using sap ecc 5.0 version.
    Is there any screen exit or how  to add a popup on the billing screen in user exit rv60afzc . Adding popup enter bill of lading date Causes any problems?
    Pleaes give me ur help ASAP. Thanks a lot!

    Added zfiled in vbrk table.and user exit Called popup.

  • Bapi's in 4.6c and ECC 6.0 version

    Hi Experts,
      Can any one list out all BAPI's which are available in 4.6 c version and what are all BAPI's available in ECC 6.0 Version separately.
    Thanks in Advance.
    Regards,
    Sudhakar Reddy .A

    Hi ,
    I know how to check BAPI's using BAPI Transaction Code, But i don't have authorisation for 4.6 c version so i request any can send me the avalable bapi's in 4.6 c and ECC 6.0 version.
    Thanks,
    Sudhakar Reddy.A

  • Defaults for IT0016 for China in ECC 6.0 Version

    Hi Friends,
    Greetings to All !!
    I have a requirement to default the values (Contract Type, Probationary period, EE & ER Notice Period) in IT0016 for China in ECC 6.0 Version. We tried to create these defaults through CONTR feature, but failed to achieve the solution.
    Actually, MP001600 screen is been replaced by MP321100 for China in the upgraded version of ECC by SAP.
    Could anyone help us with the solution, how to create defaults for this infotype 16 for China in ECC 6.0 (for screen MP321100)....
    Thanks in Advance,
    Regards,
    P Sai Narayana

    Yes Mr. Kumarpal,
    SAP has provided new screen MP321100 for China in ECC 6.0. If you want further details, please check in the SAP Note 1286584.
    Because of this new change, CONTR feature is not working properly, as expected for china. Please find the details of the Note below.
    SAP Note 1286584 - CN IT0016: Old Notice Period Information Are Not Displayed
    Summary
    Symptom
    After the legal change for China New Labor Contract Law, the Contract
    Element Infotype (IT 0016) for China start using a new screen. The
    Employer/Employee Notice Period fields are chaged to number and unit input
    instead of the old code/description input. This is required for payment in
    lieu of notice calculation.
    The old fields are no longer displayed in IT 0016 for China. However
    customer had maintained information in the old notice period fields might
    need them as a reference to update the new fields.
    More Terms
    Notice period, IT0016, Contract Management
    Cause and Prerequisites
    This is an enhancement of the screen.
    Solution
    Apply the HR support package or the correction instruction of this note.
    The old notice period fieds (P0016-KDGFR and P0016-KDGF2) are drawn on the
    screen as invisible fields. Customer can update the setting in maintenance
    view V_T588M for module pool MP321100 to set the fields as "Optional
    Fields". Thus these two fields can be shown on IT 0016 screen.
    Thanks,
    Sai
    SAP HR Consultant

  • Creating BADI in ECC 6.0 version

    hi guys,
             Can any one help me,
    1. when iam creating a BADI in ECC 6.0 version after giving the badi name and description, i dont find the INTERFACE tab.
       CAN ANY ONE GIVE ME THE STEPS TO CREATE BADI IN
    ECC 6.0 VERSIO.
    Thanks
    ahmed

    Hi,
    Check this thread...
    New to Badi
    Cheers
    VJ

  • Catt in ECC 6.0 version

    Hi all,
    When I am trying to create  CATT in scat tcode in ECC 6.0
    its giving error message
    realeases higher than 6.0 are not permitted.
    Can someone tell me how to create catt in ECC 6.0 version.
    Regards,
    Sudha.

    SAP users use CATT frequently to upload master data or to make changes to master data records. SAP Consultants and Abapers tend to use it for creating test data. The transactions run without user interaction. You can check system messages and test database changes. All tests are logged. The CATT records your keystrokes while performing the actual transaction. You then identify the fields that you wish to change in that view. Then export this data to a spreadsheet to populate with the data required. This is uploaded and executed saving you keying in the data manually.
    To perform CATT, it has to be enabled in your production environment (your systems administrator should be able to do this - SCC4). You will also need access to your development system to create the CATT script.
    The process of uploading data with a CATT:
    Activate CATT in your client
    In transaction code SCC4 - click the change button
    Double click on the client number
    In the Restriction section, tick Allows CATT processes to be started.
    Upload data using CATT
    1. Create Import variant for the fields you need
    Transaction SCAT
    Goto Parameters
    Create Import Variant
    Goto Variant -> Edit
    Goto Variant -> Fast entry or F9
    Duplicate 01
    2. To change the MRP Group for a list of Material
    Assuming that I want to change the MRP Group for a list of Material.
    My text files should look something like this:
    Variant ID Variant Text &ZDISGR &ZMATNR
    --> Parameter texts MRP group Material
    --> Default Values M1 A001
    Changes to the default values displayed above not effective
    #01 M1 A001
    #02 '' A002
    #03 M1 A003
    Note : '' denotes a blank in the field. e.g. Material A002 MRP group will be replaced by a blank.
    3. Configure the recorded entry fields to read from the imported text file data
    In the CATT : Maintain functions test case Screen
    Double click on the Object Name
    Double click on the screen number with your desired fields
    Park the cursor on the fields
    Click Edit -> Details
    Fill in the Parameters Name and Field Contents
    Finish Save it.
    Assign your text file data.
    In the CATT : Execute test case Screen
    Click External from file and choose your text file
    CATT will now read from your text file and update whatever data you have specified.
    you can also go through this link to get even more details on it..
    http://www.sap-img.com/sap-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/content.htm
    http://www.sap-img.com/sap-catt.htm
    https://wiki.sdn.sap.com/wiki/display/ERPFI/CATT%20-%20Computer%20Aided%20Test%20Tool
    Reward points if useful.

  • How  can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

    Hi All,
                Can any one help, how  to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
    Given BADI name was----VENDOR_ADD_DATA_BI .
    Thanks

    Anil,
    look at this thread ..may be this helps you.
    Re: 824 IDOC and BADI/User Exit
    sateesh.

  • FF6A transaction missing in menu in SAP ECC 6.0 version

    Hi,
    In SAP ECC 6.0 version, the FF6A transaction has disappeared in the SAP menu, but it works if we execute directly.
    Is an error and exists a note to solve it  or is a normal work?.
    Thak you,
    David.

    Hi David,
    I just checked menu on one of Customer I have access to, also running version 6.0, and this transaction is included in the SAP menu list.
    to be honest, I don't know whether it is the error or not, however I would you suggest to verify, if you can find this transaction by technical name in the full SAP menu. Otherwise, create OSS message for SAP.
    Best regards,
    Renatas

  • Regarding XK02 transaction in SAP ECC 6.0 Version

    Hi All,
    I am working with an object which calls a transaction <b>XK02</b> to modify the name and contact details fields in  Version <b>SAP ECC 6.0</b>.
    The problem is that, when the transaction is run manually and saved or when an SHDB Recording is created, the data is getting updated.
    But when the transaction is called from a program or when the SHDB Recording which is already created is run, the data is not getting updated in Version SAP ECC 6.0.
    The data is getting updated properly when it is done in Version SAP 4.6b.
    Central Address Management System is used here.
    Can anybody please help me in this regard?
    Thanks & Regards,
    Vaitheeswaran.

    Hi Prabhu,
    The call transaction statement is running smoothly. The SY-SUBRC is 0 for this.
    The thing is, there is a Check Box at the end of the screen called 'Use Central Address Management' when the SHDB is created.
    If this is checked, the contact details are stored in ADRC and LFA1 tables and only in LFA1 if not checked.
    In the new version SAP ECC 6.0, the data should also get populated in the ADRC table.
    There is a slight change in the logic in SAP ECC 6.0 version.
    Thanks & Regards,
    Vaitheeswaran.

Maybe you are looking for