FM in Mono

My 3500 is giving FM in mono outpur. Other music files are in Stereo. Please help

Hi!
The quality of recording is not so good, so I think this (stereo or mono) is not so important. I never use this function.

Similar Messages

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

Capture and Export of Mono Audio in FCP HD

I have just upgraded to FCP HD from FCP 3. My problem is all of my audio needs to be Mono only. In v3 this was simple I just chose Mono from the capture settings and Mono for Export.
On FCP HD I can't find any way to capture and export as Mono. When I record Voice Over in FCP all I get is the right channel and even when I set it to pan centre it still only comes out the right speaker after export.
If I've got to manually duplicate tracks everytime it will take me forever.
Anybody know a simple way to capture and export Mono only (the same for both Ch 1 + 2)
G4 DP 1.25 Mac OS X (10.4.6)

This might seem the long way 'round but it may save a ton of time in the end.
Do your FCP mix in stereo as Colin suggests, then take the final audio track into STP or Peak and do a "mix to mono" and then save a new AIFF file with the resulting mono clip.
Then bring that back into FCP on a new audio track, line it up with the stereo, then either disable or delete the stereo tracks. This will give you a true mono audio track.
But where are you going with this content that will handle mono audio? DVDs require a stereo AC3 files. Are you sure you really need a mono sound track?

How do I use mono and 1 spot colour for print, where the spot colour applies to an element, rather than the whole image?

I am struggling to work with spot colours, using scanned images edited in Photoshop for use in InDesign to then go to print.
We print to two plates to save money for our publication. In this case magenta and black.
I could use the spot colour mode but that works with curves and I only want a certain part magenta. Imagine a business card with a gloss finish where I only want to apply it to certain part ie the name of the employee, using a curve would match a certain shade therefore this method would be unsuitable.
I have also tried using channels, one grayscale and one magenta, but using the file types either InDesign bugs or it comes out in mono.
It isn't possible to recreate the logo in InDesign, if only it was this easy...
If someones already discussed this, I can't find it, but if someone could point me in the right direction—I'd be very grateful!
Using Photoshop CS4, InDesign CS4. Access to Adobe Cloud at home...

I'm assuming at least some people on here must have experience of the Scintilla control for creating a Notepad++ type application. I'd like to use this control, unfortunately there is very little in the way of documentation or working examples
around
>unfortunately there is very little in the way of documentation
Have you read all of this?
Scintilla Documentation
http://www.scintilla.org/ScintillaDoc.html
>or working examples around
Have you examined this project in detail?
SciTE is a SCIntilla based Text Editor.
http://www.scintilla.org/SciTE.html
SciTE Documentation
http://www.scintilla.org/SciTEDoc.html
- Wayne

All Real Instruments coming through in Mono

I am using a lexicon Omega interface into garage band. The input settings say stereo but every real instrument I record comes through in mono. The only time I can get stereo is when I use one of the garage band instrument settings which is fine for guitars and keyboards. Any suggestions?

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to reput a mono track when it's in stereo?

I search how to put a track in mono when it's in stereo, we can do it easily on logic pro 9 but i don't find in logic pro X... Thanks!!!

I can't find it, for example, If I want to put the output of a stereo drums in a mono output I can't do it because I must to choose the stereo drums, but on logic pro 9 I can do it (to output a stereo instrument in a mono output even if it transform it in mono it's not a problem, it's to use on a analogic mixtable...)
Thanks!

Mono files displayed as stereo in arrange window

Hi there everyone. This is my first post and thanks to all the help from all your other posts. here's my question:
I did a recording in ProTools of a Jazz Combo with a Decca Tree and three spot mics. Normally I just load the files from the ProTools "audiofiles" folder into Logic and all is great but on this session Logic is reading the center and right Decca tracks as stereo files. They are not stereo, but mono and Quicktime-Get Info: says they are mono as does clicking on them and selecting "Get Info". Why would they appear as stereo files? They are showing up in the Mixer window as mono channel strips and in the Arrange window and the Audio Window they are listed as stereo. When panning the three Decca tree tracks Left, Center and Right I get a totally mono signal according to the Helper Plugin inserted on the Master Out bus. The file names are also not being copied to the track names properly. Any help would be wonderful as I need to get this mix done ASAP.
Thanks:)
Powerbook 15" Mac OS X (10.4.10) 1.5 gig ram, Presonus Firebox
Powerbook 15" Mac OS X (10.4.10) 1.5 gig ram, Presonus Firebox

Once you have dragged the files into the arrange page, look at the channel strip for that track and make sure that the button at the button is toggled to mono. Each track in arrange can handle a stereo or mono file. The LED type thing which shows the level toggles between mono look ... and stereo look.

Help trying to bounce a mono track in place with autotune plugin

I am trying to render a vocal track which has an Antares Autotune plugin by using the bounce track in place. It works but no matter what I try, the new track is being created in stereo. The origional track is mono. What would I be doing wrong here? Thanks
James

Ah, Thank you, so you are saying that if I uncheck the Volume and Pan automation checkbox it should work. Maybe that's it then. My origional channel strip and regions are mono. I will try this and see what happens. I also noticed I don't have the last logic upgrade. I will also be upgrading. Thanks
James

Bouncing down to new track - mono!!

Hi - I'm using CS5.5 for Mac and I want to be able to bounce edited, joined, multi-clips to new tracks in mono. The original tracks are all mono - but the bouncing function always produces a new track in stereo. Is there a setting somewhere that I've missed (I have looked exhaustively).
As a workaround I have to use the 'convert sample' function in Edit view to create a mono track from the newly bounced stereo track and then add it back in to Multitrack view. This is extremely tedious in a complicated editing project.
Anyone else come across this?
Cheers
CrispJB

myscreennameis:RobbieS wrote:
ignor SteveG, does not understand the question.
Understand the question perfectly - there isn't an answer because, as you have observed, the function isn't there at present.
I'm thinking I might as well just uninstall CS6 because to many featues from CS3 were removed in CS6 and I find it user UNFRIENDLY.
No features from Audition 3 (not CS3) were removed in CS6 (only it was actually CS5.5) - they simply weren't implemented in a complete rewrite from the ground up. Not all features were re-implemented, simply because there wasn't sufficient time to implement them all before the externally-imposed deadline arrived. Some, but not all, have been added back in successive iterations. Yes, it's pretty much by popularity I think, although some things will likely never return, as they've been superseded by newer implementations. A typical example of this would be Scripting.
What I pointed out (several years ago), possibly too subtly, was that there are alternative ways of achieving a mono bounce, and it's one of those that you have to use. I have no idea if the original 'bounce to mono' will be implemented - if you want it back, you'll have to submit a feature request.
Audition Feature Requests

Cant record in stereo , mono input (aux in) intel ALC270 [Solved]

Hi there, i've been reading the forum but i cannot get the right answer to this issue.
I am trying to capture audio with the microphone input connector.
I tried it using audacity (as i always did with other distros but now is not working) and with this command arecord -vv -fdat foo.wav
The thing is, i always end up with a mono audio file. I see in alsamixer the input/capture connector is stereo, i can see the Left and Right volume levels
but modifing those make no difference.
Something seems to tell the whole system to translate the stereo microphone into a mono microphone or something like that... i am no quiet sure, cause in audacity the recording track shows a stereo track although both channels have the same audio track, the right channel one...
i was using this same computer not long ago with fedora, and for like 2 years with slackware and always worked fine... i've been using archlinux for 4 months now and i came across with this while trying to rip some new cassettes i got.
Thanks in advance for your help pals.
Cheers!
Last edited by federico7979 (2015-04-18 23:34:36)

upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.64
!!Script ran on: Fri Apr 17 11:43:53 UTC 2015
!!Linux Distribution
Arch Linux \r (\l) DISTRIB_ID=Arch DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: K55A
Product Version: 1.0
Firmware Version: K55A.407
!!Kernel Information
Kernel release: 3.19.3-3-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.19.3-3-ARCH
Library version: 1.0.29
Utilities version: 1.0.29
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e10000 irq 29
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 1043:1457
!!Modprobe options (Sound related)
snd_hda_intel: model=laptop-amic
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : laptop-amic,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC270
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0270
Subsystem Id: 0x10431457
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC270 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x57 0x57]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC270 Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x08 0x08]
Converter: stream=4, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Internal Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Internal Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c 0x0d*
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x04a11840: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x0d
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x90a70930: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x40089d2d: [N/A] Line Out at Ext N/A
Conn = DIN, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=25
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x04211020: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Connection: 2
0x0c* 0x0d
Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 2 Apr 17 08:14 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 6 Apr 17 08:14 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Apr 17 08:14 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 4 Apr 17 08:15 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Apr 17 08:39 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 5 Apr 17 08:15 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 17 08:14 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 17 08:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Apr 17 08:14 .
drwxr-xr-x 3 root root 220 Apr 17 08:14 ..
lrwxrwxrwx 1 root root 12 Apr 17 08:14 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!System wide config file (/etc/asound.conf)
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xf7e10000 irq 29'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0270,10431457,00100100 HDA:80862806,80860101,00100000'
Controls : 30
Simple ctrls : 12
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [on]
Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 8 [26%] [-4.50dB] [on]
Front Right: Capture 8 [26%] [-4.50dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!Alsactl output
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Internal Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.6 {
iface MIXER
name 'Internal Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.7 {
iface MIXER
name 'Mic Playback Volume'
value.0 23
value.1 23
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 0
dbvalue.1 0
control.8 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.9 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.10 {
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -450
dbvalue.1 -450
control.11 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.12 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
control.13 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
control.14 {
iface MIXER
name 'Master Playback Volume'
value 87
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
control.15 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.16 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.17 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.18 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.19 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.20 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.21 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.22 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
control.28 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.30 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
--endcollapse--
!!All Loaded Modules
Module
fuse
ctr
ccm
bnep
bluetooth
nls_iso8859_1
nls_cp437
vfat
fat
arc4
brcmsmac
cordic
uvcvideo
brcmutil
videobuf2_vmalloc
coretemp
videobuf2_memops
videobuf2_core
snd_hda_codec_hdmi
v4l2_common
intel_rapl
videodev
iosf_mbi
media
b43
x86_pkg_temp_thermal
snd_hda_codec_realtek
snd_hda_codec_generic
intel_powerclamp
mac80211
kvm_intel
cfg80211
i915
snd_hda_intel
snd_hda_controller
ssb
rng_core
pcmcia
snd_hda_codec
pcmcia_core
snd_hwdep
kvm
r8169
snd_pcm
rtsx_pci_ms
drm_kms_helper
bcma
asus_nb_wmi
drm
asus_wmi
joydev
iTCO_wdt
crct10dif_pclmul
mii
memstick
mousedev
snd_timer
sparse_keymap
snd
crc32_pclmul
iTCO_vendor_support
intel_gtt
soundcore
crc32c_intel
led_class
rfkill
hwmon
shpchp
wmi
i2c_i801
i2c_algo_bit
i2c_core
ghash_clmulni_intel
cryptd
pcspkr
evdev
mac_hid
psmouse
serio_raw
mei_me
mei
lpc_ich
thermal
video
button
ac
processor
battery
sch_fq_codel
nfs
lockd
grace
sunrpc
fscache
ext4
crc16
mbcache
jbd2
sr_mod
cdrom
sd_mod
rtsx_pci_sdmmc
mmc_core
atkbd
libps2
ahci
xhci_pci
libahci
libata
scsi_mod
ehci_pci
rtsx_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
i8042
serio
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x14 0x90170110
0x17 0x411111f0
0x18 0x04a11840
0x19 0x90a70930
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40089d2d
0x1e 0x411111f0
0x21 0x04211020
/sys/class/sound/hwC0D0/driver_pin_configs:
0x14 0x99130110
0x15 0x0121401f
0x18 0x01a19c20
0x19 0x99a3092f
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x58560010
0x06 0x18560020
0x07 0x58560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:
!!ALSA/HDA dmesg
[ 12.098095] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 12.151130] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.151132] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.151134] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.151135] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.151137] sound hdaudioC0D0: inputs:
[ 12.151139] sound hdaudioC0D0: Internal Mic=0x19
[ 12.151141] sound hdaudioC0D0: Mic=0x18
[ 12.294566] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 12.463347] i915 0000:00:02.0: registered panic notifier
[ 12.472923] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.473056] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.473157] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.569375] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b354)
Last edited by federico7979 (2015-04-18 23:04:59)

Sharing a stereo track in Mono

Hi -
I just upgraded to 10.0.2. In the previous version of Garageband, I was able to specify that when I wanted to share my track to iTunes, I could have it export in mono. I have to play my track on speakers that aren't reliably set up to support good stereo, so this is a pretty critical function for me.
Is it possible to export the track to mono? I've tried changing the input to Mono on the track, but then I lost the left side of my audio. I want it to play evenly all the time out of both speakers.
Thanks!

If you center pan all the material in your sequence it will be effectively mono. The output is always two tracks at least. You could make the output dual mono and send everything to one track and leave the other track empty, but I don't think you can export just one track of audio. Is there some special reason you only need one track?

[CLOSED] snd-hda-Intel model mono/stereo and alsamixer issues

DROPPED: I just installed the Windows disc that came with the laptop and the official drivers, while they work better (a 6 channel wav plays fine in the speakers, linux only plays 2 of them) the most important issues like mono output only in the headphones jack is repeated. It seems the hardware problem. I don't know how I break it, but I did.
When I installed Arch linux about this laptop about two years ago everything was working OK. "aplay /usr/share/sounds/alsa/Front_Right.wav" (and left) played in the corresponding speakers and headphones. "alsamixer" used to have two volume control bars per control, for left and right.
I can't pinpoint the moment but sometime in the last few months everything is playing as mono. Now alsamixer shows only one volume bar per control and "Master" can only to be (un)muted as mono. I can still mute the "Speaker" control individually using '<' and '>'. The "Headphone" volume control is ignored, neither volume nor mute work. And the strangest thing: when I mute the left Speaker it also mutes the headphones.
I never did any alsa configuration and so I'm assuming the model auto detection is broken. I tried a few model= options without luck. The problem is the laptop is brandless (pseudo-olivetti 750). Perhaps with some luck someone can help me identify which model should I use.
Physical Description:
The laptop has to on-board speakers and two jacks on the front, one labeled with a Microhone (slash) two things I cannot recognize and the other labeled SPDIF OUT (slash) Headphones. (I tried the only model described as 2-jack in the wiki guide without luck).
# lspci -v | grep -A11 Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: Uniwill Computer Corp Device 907e
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at f0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, ALC883 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC883 Digital
IEC958 (S/PDIF) Digital Audio Output
# aplay -D default /usr/share/sounds/alsa/Front_Left.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Left.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
#aplay -D front /usr/share/sounds/alsa/Front_Left.wav
aplay: main:608: audio open error: Device or resource busy
# lsof /dev/dsp
# (nothing)
# amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 16 [52%] [12.00dB] [off]
Front Right: Capture 16 [52%] [12.00dB] [off]
Simple mixer control 'Caller ID',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Off-hook',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Thanks for any help, I tried most of the models listed as ALC883 (and some others) without luck, is there any other option that could cause this issues?
Last edited by dresb (2011-02-07 16:29:50)

Thanks a lot for the hint! codec#0 was the modem while this is from codec#1:
# cat /proc/asound/card0/codec#1
Codec: Realtek ALC883
Address: 1
Function Id: 0x1
Vendor Id: 0x10ec0883
Subsystem Id: 0x1584907e
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
Device: name="ALC883 Analog", type="Audio", device=0
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="ALC883 Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Device: name="ALC883 Analog", type="Audio", device=0
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Unsolicited: tag=00, enabled=0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
Control: name="Mic Playback Switch", index=0, device=0
Control: name="Beep Playback Volume", index=0, device=0
Control: name="Beep Playback Switch", index=0, device=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
Control: name="Headphone Playback Switch", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
Control: name="Speaker Playback Switch", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000003e: IN OUT HP Detect Trigger
Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=04, enabled=1
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000003e: IN OUT HP Detect Trigger
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003e: IN OUT HP Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003e: IN OUT HP Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19830: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x9983013f: [Fixed] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=17
Processing Coefficient: 0x4000
Coefficient Index: 0x0b
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x25 0x0b
I assume the combination Vendor Id: 0x10ec0883 + Subsystem Id: 0x1584907e is what I should be looking for right? Google gave me three resuts from alsa project's DB: http://www.google.com/search?q=0x10ec08 … e&filter=0 resulting in two more models to try:
model=laptop (I'm almost certain I tried this already)
model=lenovo
I also didn't knew about alsa-info.sh so I downloaded, ran it and got this http://www.alsa-project.org/db/?f=9f7e7 … bf5c3ad9ea including:
!!DMI Information
Manufacturer: Standard
Product Name: L50IIX
L50IIX seems to be a board made by Uniwill and used by various companies which adds even more possible models:
model=uniwill
model=uniwill-m31
model=fujitsu
model=lifebook
model=fujitsu-pi2515
model=fujitsu-xa3530
It seems I have a lot of testing to do later, I will report back the results and hopefully will provide a solution for any lost soul who comes across this post in the future. Thank you.

How do you combine 2 mono tracks into a single stereo track?

Question here:
How do I combine 2 mono tracks into a single stereo track in Logic?
I recorded using my left and right out of my keyboard to a hard-disk recorder (Korg d888). The files are made as two separate wav files. Is there way to combine these in Logic so I can treat it as one stereo track?
I have several files to do and am hoping Logic has something like a "combine tracks to stereo track" tool or something.

Solo both tracks and bounce them with no effects and faders at 0 dB.

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

New to logic and i cant figure out how to dupe a mono single to stereo?help

So I'm loving logic but im used to working on adobe audition and i cant figure out for the life of me how to take the mono loop im working with and turn it in to stereo. Please help and thanks ahead of time.

You can use a mono to stereo plugin. Spreader would be a good choice.

Cannot print with a Samsung ML2160 printer (mono laser) and Pages. Print function doesn't work, only drag and drop in printer's queue

Hello,
I just purchased a Samsung ML2160 printer and it doesn't work with nor my Pages program, nor the Preview (to print PDF). No matter the way I tried, the Print function doesn't work and I cannot neither print or even enter the printer preferrences menu! My MacBook Pro has worked before with other printers, but now with the Samsung it doesn't work at all... Though, if I drag and drop a document, jpg, pdf in the printer queue, it prints just fine, but that method gives me absolutely no freedom to the printing... Could it be something from the Computer -> Machintosh HD -> Library -> Printers? Because a friend of mine was recently trying to save me some disk space, and therefore erasing part of the HP printer (to remove the previous printer I owned)...
If anyone has any idea, that would be much appreciated
Thank you in advance

Do the sensible thing, as you say neither Preview nor Pages print, try other programs eg TextEdit. If none of them print then it is a System problem and very likely the printer drivers are AWOL or were never installed.
Go to Samsung's website and download their software for the Mac:
http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-printers /ML-2160/XEU-support
http://www.samsung.com/uk/support/model/ML-2160/XEU-downloads
Peter

FM in Mono

Similar Messages

Maybe you are looking for