FM integration with Travel Management

Hi,
My FI consultants encountered a message 'Saved trip entailed no cost' upon clicking of SAVE button at transaction PR01 (Travel Expenses).
Any idea what is the meaning of the above msg and what is the missing configuration to get rid of the msg ?
kindly advise,
thanks
alice.

I am also interested in this.
Whenever we are creating advance, system pops up this message.  Because, it has integration with funds management this message comes up.  It says, no commitments were set up as there were no costs associated it.  But even advance is also cost of a trip.  But system is not recongizing it.
Is there anyway we can overcome this. Also, because system doesnt recognize advance as an cost, it doesnt display it in PR05 screen.  It shows as 0 in reimbursement column.
Highly appreciate if someone can give us some clarity on this.
Thanks.
Kumar

Similar Messages

  • SAP Travel Management Integration with Time Management

    Hello Gurus,
    Need some assistance with Travel integration with Time Management.
    Scenario.
    Punch in Punch out system at the client so when the employee is traveling or when he enters the Trip Request, after approval the attendance should be counted.
    Is there a config step for the same or a BADI needs to be implemented in this scenario ?
    Regards,
    BLITZZ

    A direct update of time infotypes is not possible. You can however switch on the integration in view V_T702N_A. With add. user parameter START_CATS = X you have the possibility to jump to CAT2 to record the time. For the update of the infotypes you have to follow the subsequent steps in time management.

  • SLcM integration with Loans Management

    Hi,
    I am aware that The Financial Accounting - Loans Integration ES bundle provides enterprise services that integrate the operational and analytical bank applications in the area of loan contract management. As SLcM uses Financial Accounting, does it provide functionality to be integrated with Loans Management?
    Best Regards,
    Preethi.

    Hi Preethi,
    SLCM works fine with Grants Management, Funds Management, FICA, FICO and Biller Direct. I am not sure if it has integrations with Loan management as taking loan is students responsibility and institution seems to be no where concerns except issuing admission letter or stating that student in discussion is eligible for loan.
    Regards
    Vinod

  • Integration with Materials Management

    Hi,
    Can any one tell me how SRM is integrated with Materials management?
    Whether Eprocurement is the new functionality in latest release of SRM?
    What r the steps to be followed for configuring E-procurement?
    Plz through some answers for the above queries.
    Regards
    Pratap

    Creating Device Categories in IS-U  
    Procedure
    1. Choose Utilities industry >> Device management >> Technology >> Device category >> Create.
    You branch to the initial screen for creating device categories.
    2. Enter the required data and choose a basic device category to be allocated to the device category. Chose Continue.
    - If a material exists for the device category specified, you branch to the screen Create Device Category: General Data. Go to step 3.
    - If no material exists for the device category specified, the Create MM Material dialog box appears.
    Here you can create a material in MM in the background. Processing is then continued on the next screen for device category maintenance.
    3. Enter further data for the device category and if necessary add additional basic device categories. Save your data.
    You branch to the initial screen for creating device categories.
    Result
    The device category was created in IS-U. In addition, a material master was created in the background.
    If you want to use all of the MM functions available, you must extend the material master you created in IS-U in MM.

  • MDT integrated with Configuration manager

    Hi Team,
    Just wondering if it is suggested not to open or use MDT console workbench once its been integrated with configuration manager?
    I been using it for a while and never faced any issues. I believe it should be fine to use the MDT and configuration manager both even after they been integrated. I generally use MDT workbench for building image and then use Configuration
    manager MDT based TS to deploy it.  I don't see any technical risk. Any advice\best practice? Thanks.
    Regards,

    There should be no problem opening up the MDT console on a machine with ConfigMgr installed, they are separate programs.
    Keith Garner - keithga.wordpress.com

  • Mdt integration with Config manager

    Hi Guys,
    could anyone pls. Help me in listing benefits of MDT integration with config manager? Once we have
    integration, can we do these :
    - using Ts created in MD
    - using application created in MDT
    regards,
    - using variables from mdt into config manager

    Note in addition to the answers by Torsten and Jorgen, that MDT when integrated into ConfigMgr functions as an add-on. Thus it is simply supplementing existing functionality, not replacing it.
    So, assuming MDT integration into ConfigMgr:
    Can you create a TS with extended functionality provided by MDT?
    - Yes, absolutely. Although sometimes referred to as an MDT TS at this point, it is not really; it is simply a native ConfigMgr OSD TS with additional functionality provided by MDT.
    Can you directly use or migrate an existing task sequence from stand-alone MDT?
    - No. You can manually migrate it and create an equivalent TS, but there is no way to directly import or automatically migrate a TS from stand-alone MDT.
    Can you use anything created in the MDT workbench?
    - No. As eluded to, these tools create two different task sequences. Only standalone MDT TSes can use things defined in the MDT workbench. ConfigMgr TSes leverage packages and applications created in ConfigMgr. The one exception is the MDT database which
    is traditionally created (and potentially managed) in the MDT workbench -- OSD in ConfigMgr can use this (although that's not really something reflected in the actual TS but rather implemented by the MDT scripts).
    Can a ConfigMgr TS use MDT variables?
    - Yes. Once you create a TS in ConfigMgr using the MDT integration, the bulk of the scripts used by MDT stand-alone are also used in the TS. It's these scripts that provide access to the MDT DB as mentioned above as well as MDT variables which are accessible
    to the ConfigMgr task sequence as task sequence variables.
    Jason | http://blog.configmgrftw.com

  • Integration of Travel Management with HR Payroll.

    Dear All Frnds,
    Actually the same question i had posted in Travel Management module also but could not get any reply from guru's. so i am posting here. Expecting solution replys from the guru's.
    i have 3  questions ....... Please help me frnds.
    1)    Can any body tell me how we will integrate the travel Management with HR Payroll.
           Actually this is the first time i m implementing Trvl Magmnt in my client place, actually i donot know much more about it also.
           Pls tell me frnds how we will integrate both.
           I mean is their any std sb. schema for that which we will assign to our main schema for integration with Payroll  or any         other solution is their to integrate it and
    2 )   i want to know that, is their any std pcr also for the same . pls tell me so that i can complete the config process and
           the last question is
    3) i want to creat some WT's  e.g.  (hotel allowance, Air/ Train Fare , Conveyance , etc.... all types of expenses)  also in that ,
        i want to know which is the std WT thru which i can copy     or   what is the procedure for creating WT here. 
    Eagarly awating reply from the Guru's.
    Thanks and Regards,
    Prashant

    Hi Siki,
    Thanks ur help very much in Back end ......... u helped me alot........
    Now actually i had asked 3 questions which are ........
    1. Integration with payrl
    2. Std. PCR and std sb schema.
    3. creation expense WT for TRM.
    Solutions for the above are .......
    1.    we can Integrate TRM with payrl thru Feature Called TRVPA and the inputs shud b like
           L+G = integration PayRoll,
           PA3 = Check PA03                     
           a nd rest whatever u put in it but these two are mandatory and shud be like this.
    2.    Actually ther is no std PCR for it u have to create new one and the pcr shud b like below.
           ZNTR Personnel Calculation Rule  ZNEI
        3
            ADDWT *    OT   Output table
          8000 Travelling Advance
            AMT= 8000  Set
            AMT- 8001  Subtraction
            AMT- 8002  Subtraction
            AMT- 8003  Subtraction
            AMT- 8004  Subtraction
            AMT- 8005  Subtraction
            AMT- 8006  Subtraction
            AMT- 8007  Subtraction
            AMT- 8008  Subtraction
            AMT- 8009  Subtraction
            AMT- 8010  Subtraction
            AMT- 8011  Subtraction
            AMT- 8012  Subtraction
            AMT- 8013  Subtraction
            AMT- 8014  Subtraction
            AMT- 8015  Subtraction
            AMT?0      Comparison
              <
                ADDWT 1545 OT   Output table
              =
              >
                ADDWT 2510 OT   Output table
    and ther are some std schema's which u can use it for preparing the customisd one but ther is no std sb schema for India so u can any of the below one for reference...........
    Country                             Schema                                  Subschema
    USA                                    U000                                           UREI
    Germany                             D000                                           DREI
    Austria                                A000                                           AREI
    Japan                                  J000                                            JREI
    Switzerland                        CH00                                           CREI
    Belgium                               B000                                            BREI
    Netherlands                        N000                                            NREI
    Great Britain                       G000                                            GREI
    Denmark                             M00E                                            MREI
    France                                F000                                             FREI
    Spain                                  E000                                              EREI
    Canada                              K000                                              KREI
    Sweden                             S000                                              SREI
    Norway                             V000                                              VREI
    Mexico                               MX00                                             MXTV
    Portugal                             P000                                               PREI
    among all the above i felt USA and Switzerland  are best for copy which i reffered else u can use anyother also....
    3.      Actually there r no specific such std WT for the TRM ........ we need to copy the existing std WT like M215, M233, MDD0, /101, and /110, etc.... these WT i used for copy and we can use others also..........
    Siki .......... thanks again and keep it up gud job.............
    Thanks,
    Prashantkumar Tata.

  • SAP CPS Redwood integration with Solution Manager 7.1 SP8

    Hi experts,
    I need your help..!!
    We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
    Regards
    Zohaib

    hi,
    dont have any explicit step by step doc for CPS integration
    but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
    some more on SAP Central Process Scheduling by Redwood (CPS)
    Thanks
    Jansi

  • SAP MM- SRV Mgmt integration with Fleet management-Config Required

    Hi friends,
    My client is asking us to implement SAP fleet managent integration with SAP MM service management.kindly help me by providing config details also.
    Regards,
    William

    Hi,
    Read the below sap help
    http://help.sap.com/saphelp_470/helpdata/en/e3/0aeb1802e211d39eeb0000e8323350/frameset.htm
    Kapil

  • CRMOD integration with Content management system

    Helll All,
    Is any one try with Contenet management system integration with CRMOD. If yes could you please help me with some techniques how to integrated with CRMOD. Thanks in advance.
    Regards,
    Subbu

    If you Google 'Flash SCORM' you should find a good deal of
    info.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • BCP Microsoft Platform integration with Solution Manager

    Hi
    Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
    If so how?  Is there documentation available explaining the process?

    Hi Johan,
    There is some level of integration available with Solution Manager.  To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
    You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
    Thanks.

  • Peoplesoft integration with solution manager

    Hi Experts,
    I would like to know whether peoplesoft can be integrated with SAP solution manager and whether other third party applications can be integrated with Solman... it can be helpdesk, monitoring or any other scenario... Please pass on any information that you might have

    I'm also interested in  this topic because we want to integrate incidents and changes reported by the solution manager in a Peoplesoft S3 helpdesk.

  • Help Needed: HP QTP/UFT integration with Solution Manager

    Hi Experts,
    We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
    Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
    Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
    Detailed steps for replicating the issue:
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    2.     Open Unified Functional Testing (UFT) 12.00
    3.     Click File -> New -> Test
    4.     Type even a dummy script in the Action window
    5.     Save Test Script by clicking File -> Save <test name> As…
    6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
    7.     Error Message appears
    Note:
    One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
    I am asked if I want to overwrite existing test in Solution Manager.

    Hi,
    I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    Error:
    Message
    SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner <IP>:3300' not reached
    TIME        Tue Jan 19 12:02:17 201
    RELEASE     710
    COMPONENT   NI (network interface)
    VERSION     39
    RC          -10
    MODULE      nixxi.cpp
    LINE        3286
    DETAIL      NiPConnect2: 192.12.353.12:3302
    SYSTEM CALL connect
    ERRNO       10060
    ERRNO TEXT  WSAETIMEDOUT: Connection timed out
    COUNTER     1
    Could you please guide?
    Regards,
    Raichand

  • ECATT integration with solution Manager

    Hello Colleagues,
    Please let me know if any of you have worked on integration between Solution Manager and eCATT.
    I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
    Any info would be of great help.
    Thanks,
    Ajay

    Hello Ajay,
    Have you seen these links?
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
    These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
    Regards,
    Paul

  • ECC integration with Document Management System

    Hi,
    Can anybody provide step by step approach for connecting ECC with Document management system(product of EMC).
    Also would appreciate if somebody clarifies the folllowing queries
    1) Do we really need Archivelink if we just want to store documents and access documents from DMS.
    2)  What are the configurations required at DMS side and what are the configurations required at SAP ECC.
    Any solution to my problem will be much appreciated.
    Thanks & Regards
    Prabhat

    If you Google 'Flash SCORM' you should find a good deal of
    info.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

Maybe you are looking for